All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
	<dianders@chromium.org>, <swboyd@chromium.org>,
	<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
	"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v14 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node
Date: Thu, 7 Jul 2022 18:53:00 +0530	[thread overview]
Message-ID: <1657200184-29565-9-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1657200184-29565-1-git-send-email-quic_srivasam@quicinc.com>

Add lpass cpu node for audio on sc7280 based platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 62 ++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 1065742..14e6c4e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -22,6 +22,7 @@
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -2336,6 +2337,67 @@
 			#power-domain-cells = <1>;
 		};
 
+		lpass_cpu: audio@3987000 {
+			compatible = "qcom,sc7280-lpass-cpu";
+
+			reg = <0 0x03987000 0 0x68000>,
+			      <0 0x03b00000 0 0x29000>,
+			      <0 0x03260000 0 0xc000>,
+			      <0 0x03280000 0 0x29000>,
+			      <0 0x03340000 0 0x29000>,
+			      <0 0x0336c000 0 0x3000>;
+			reg-names = "lpass-hdmiif",
+				    "lpass-lpaif",
+				    "lpass-rxtx-cdc-dma-lpm",
+				    "lpass-rxtx-lpaif",
+				    "lpass-va-lpaif",
+				    "lpass-va-cdc-dma-lpm";
+
+			iommus = <&apps_smmu 0x1820 0>,
+				 <&apps_smmu 0x1821 0>,
+				 <&apps_smmu 0x1832 0>;
+
+			power-domains =	<&rpmhpd SC7280_LCX>;
+			power-domain-names = "lcx";
+			required-opps = <&rpmhpd_opp_nom>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>,
+				 <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+				 <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+			clock-names = "aon_cc_audio_hm_h",
+				      "audio_cc_ext_mclk0",
+				      "core_cc_sysnoc_mport_core",
+				      "core_cc_ext_if0_ibit",
+				      "core_cc_ext_if1_ibit",
+				      "audio_cc_codec_mem",
+				      "audio_cc_codec_mem0",
+				      "audio_cc_codec_mem1",
+				      "audio_cc_codec_mem2",
+				      "aon_cc_va_mem0";
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif",
+					  "lpass-irq-hdmi",
+					  "lpass-irq-vaif",
+					  "lpass-irq-rxtxif";
+
+			status = "disabled";
+		};
+
 		lpass_hm: clock-controller@3c00000 {
 			compatible = "qcom,sc7280-lpasshm";
 			reg = <0 0x3c00000 0 0x28>;
-- 
2.7.4


  parent reply	other threads:[~2022-07-07 13:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Srinivasa Rao Mandadapu
2022-07-07 13:23 ` Srinivasa Rao Mandadapu [this message]
2022-07-07 13:23 ` [PATCH v14 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 15:28 ` [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Bjorn Andersson
2022-07-08  4:03   ` Srinivasa Rao Mandadapu
2022-09-13 15:04 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1657200184-29565-9-git-send-email-quic_srivasam@quicinc.com \
    --to=quic_srivasam@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=judyhsiao@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_potturu@quicinc.com \
    --cc=quic_rohkumar@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.