All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chaoyong He <chaoyong.he@corigine.com>
To: dev@dpdk.org
Cc: oss-drivers@corigine.com, niklas.soderlund@corigine.com,
	Chaoyong He <chaoyong.he@corigine.com>
Subject: [PATCH v7 06/12] net/nfp: add flower PF related routines
Date: Fri, 12 Aug 2022 18:22:24 +0800	[thread overview]
Message-ID: <1660299750-10668-7-git-send-email-chaoyong.he@corigine.com> (raw)
In-Reply-To: <1660299750-10668-1-git-send-email-chaoyong.he@corigine.com>

Adds the start/stop/close routine of the flower PF vNIC.
And we reuse the configure/link_update routine.

Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
---
 drivers/net/nfp/flower/nfp_flower.c | 186 ++++++++++++++++++++++++++++++++++++
 1 file changed, 186 insertions(+)

diff --git a/drivers/net/nfp/flower/nfp_flower.c b/drivers/net/nfp/flower/nfp_flower.c
index 6f6af19..43d4667 100644
--- a/drivers/net/nfp/flower/nfp_flower.c
+++ b/drivers/net/nfp/flower/nfp_flower.c
@@ -7,6 +7,7 @@
 #include <ethdev_driver.h>
 #include <rte_service_component.h>
 #include <rte_malloc.h>
+#include <rte_alarm.h>
 #include <ethdev_pci.h>
 #include <ethdev_driver.h>
 
@@ -41,8 +42,168 @@
 	.tx_free_thresh = DEFAULT_TX_FREE_THRESH,
 };
 
+static int
+nfp_flower_pf_start(struct rte_eth_dev *dev)
+{
+	int ret;
+	uint32_t new_ctrl;
+	uint32_t update = 0;
+	struct nfp_net_hw *hw;
+
+	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	/* Disabling queues just in case... */
+	nfp_net_disable_queues(dev);
+
+	/* Enabling the required queues in the device */
+	nfp_net_enable_queues(dev);
+
+	new_ctrl = nfp_check_offloads(dev);
+
+	/* Writing configuration parameters in the device */
+	nfp_net_params_setup(hw);
+
+	nfp_net_rss_config_default(dev);
+	update |= NFP_NET_CFG_UPDATE_RSS;
+
+	if (hw->cap & NFP_NET_CFG_CTRL_RSS2)
+		new_ctrl |= NFP_NET_CFG_CTRL_RSS2;
+	else
+		new_ctrl |= NFP_NET_CFG_CTRL_RSS;
+
+	/* Enable device */
+	new_ctrl |= NFP_NET_CFG_CTRL_ENABLE;
+
+	update |= NFP_NET_CFG_UPDATE_GEN | NFP_NET_CFG_UPDATE_RING;
+
+	if (hw->cap & NFP_NET_CFG_CTRL_RINGCFG)
+		new_ctrl |= NFP_NET_CFG_CTRL_RINGCFG;
+
+	nn_cfg_writel(hw, NFP_NET_CFG_CTRL, new_ctrl);
+
+	/* If an error when reconfig we avoid to change hw state */
+	ret = nfp_net_reconfig(hw, new_ctrl, update);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Failed to reconfig PF vnic");
+		return -EIO;
+	}
+
+	hw->ctrl = new_ctrl;
+
+	/* Setup the freelist ring */
+	ret = nfp_net_rx_freelist_setup(dev);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Error with flower PF vNIC freelist setup");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/* Stop device: disable rx and tx functions to allow for reconfiguring. */
+static int
+nfp_flower_pf_stop(struct rte_eth_dev *dev)
+{
+	uint16_t i;
+	struct nfp_net_hw *hw;
+	struct nfp_net_txq *this_tx_q;
+	struct nfp_net_rxq *this_rx_q;
+
+	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	nfp_net_disable_queues(dev);
+
+	/* Clear queues */
+	for (i = 0; i < dev->data->nb_tx_queues; i++) {
+		this_tx_q = (struct nfp_net_txq *)dev->data->tx_queues[i];
+		nfp_net_reset_tx_queue(this_tx_q);
+	}
+
+	for (i = 0; i < dev->data->nb_rx_queues; i++) {
+		this_rx_q = (struct nfp_net_rxq *)dev->data->rx_queues[i];
+		nfp_net_reset_rx_queue(this_rx_q);
+	}
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+		/* Configure the physical port down */
+		nfp_eth_set_configured(hw->cpp, hw->nfp_idx, 0);
+	else
+		nfp_eth_set_configured(dev->process_private, hw->nfp_idx, 0);
+
+	return 0;
+}
+
+/* Reset and stop device. The device can not be restarted. */
+static int
+nfp_flower_pf_close(struct rte_eth_dev *dev)
+{
+	uint16_t i;
+	struct nfp_net_hw *hw;
+	struct nfp_pf_dev *pf_dev;
+	struct nfp_net_txq *this_tx_q;
+	struct nfp_net_rxq *this_rx_q;
+	struct rte_pci_device *pci_dev;
+	struct nfp_app_flower *app_flower;
+
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+		return 0;
+
+	pf_dev = NFP_NET_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+	app_flower = nfp_app_flower_priv_get(pf_dev);
+
+	/*
+	 * We assume that the DPDK application is stopping all the
+	 * threads/queues before calling the device close function.
+	 */
+	nfp_net_disable_queues(dev);
+
+	/* Clear queues */
+	for (i = 0; i < dev->data->nb_tx_queues; i++) {
+		this_tx_q = (struct nfp_net_txq *)dev->data->tx_queues[i];
+		nfp_net_reset_tx_queue(this_tx_q);
+	}
+
+	for (i = 0; i < dev->data->nb_rx_queues; i++) {
+		this_rx_q = (struct nfp_net_rxq *)dev->data->rx_queues[i];
+		nfp_net_reset_rx_queue(this_rx_q);
+	}
+
+	/* Cancel possible impending LSC work here before releasing the port*/
+	rte_eal_alarm_cancel(nfp_net_dev_interrupt_delayed_handler, (void *)dev);
+
+	nn_cfg_writeb(hw, NFP_NET_CFG_LSC, 0xff);
+
+	rte_eth_dev_release_port(dev);
+
+	/* Now it is safe to free all PF resources */
+	PMD_DRV_LOG(INFO, "Freeing PF resources");
+	nfp_cpp_area_free(pf_dev->ctrl_area);
+	nfp_cpp_area_free(pf_dev->hwqueues_area);
+	free(pf_dev->hwinfo);
+	free(pf_dev->sym_tbl);
+	nfp_cpp_free(pf_dev->cpp);
+	rte_free(app_flower);
+	rte_free(pf_dev);
+
+	rte_intr_disable(pci_dev->intr_handle);
+
+	/* unregister callback func from eal lib */
+	rte_intr_callback_unregister(pci_dev->intr_handle,
+			nfp_net_dev_interrupt_handler, (void *)dev);
+
+	return 0;
+}
+
 static const struct eth_dev_ops nfp_flower_pf_vnic_ops = {
 	.dev_infos_get          = nfp_net_infos_get,
+	.link_update            = nfp_net_link_update,
+	.dev_configure          = nfp_net_configure,
+
+	.dev_start              = nfp_flower_pf_start,
+	.dev_stop               = nfp_flower_pf_stop,
+	.dev_close              = nfp_flower_pf_close,
 };
 
 static struct rte_service_spec flower_services[NFP_FLOWER_SERVICE_MAX] = {
@@ -343,6 +504,24 @@
 	return ret;
 }
 
+static int
+nfp_flower_start_pf_vnic(struct nfp_net_hw *hw)
+{
+	int ret;
+	uint16_t port_id;
+
+	port_id = hw->eth_dev->data->port_id;
+
+	/* Start the device */
+	ret = rte_eth_dev_start(port_id);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Could not start PF device %d", port_id);
+		return ret;
+	}
+
+	return 0;
+}
+
 int
 nfp_init_app_flower(struct nfp_pf_dev *pf_dev)
 {
@@ -400,6 +579,13 @@
 		goto pf_cpp_area_cleanup;
 	}
 
+	/* Start the PF vNIC */
+	ret = nfp_flower_start_pf_vnic(app_flower->pf_hw);
+	if (ret != 0) {
+		PMD_INIT_LOG(ERR, "Could not start flower PF vNIC");
+		goto pf_vnic_cleanup;
+	}
+
 	/* Start up flower services */
 	ret = nfp_flower_enable_services(app_flower);
 	if (ret != 0) {
-- 
1.8.3.1


  parent reply	other threads:[~2022-08-12 10:23 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-12 10:22 [PATCH v7 00/12] preparation for the rte_flow offload of nfp PMD Chaoyong He
2022-08-12 10:22 ` [PATCH v7 01/12] net/nfp: move app specific attributes to own struct Chaoyong He
2022-09-05 15:38   ` Ferruh Yigit
2022-09-06  9:20     ` Chaoyong He
2022-09-06  9:35       ` Ferruh Yigit
2022-08-12 10:22 ` [PATCH v7 02/12] net/nfp: simplify initialization and remove dead code Chaoyong He
2022-08-12 10:22 ` [PATCH v7 03/12] net/nfp: move app specific init logic to own function Chaoyong He
2022-09-05 15:38   ` Ferruh Yigit
2022-09-06  8:29     ` Chaoyong He
2022-09-06  9:47       ` Ferruh Yigit
2022-08-12 10:22 ` [PATCH v7 04/12] net/nfp: add initial flower firmware support Chaoyong He
2022-09-05 15:39   ` Ferruh Yigit
2022-09-07  8:22     ` Chaoyong He
2022-09-07 13:24       ` Ferruh Yigit
2022-08-12 10:22 ` [PATCH v7 05/12] net/nfp: add flower PF setup and mempool init logic Chaoyong He
2022-09-05 15:42   ` Ferruh Yigit
2022-09-06  8:45     ` Chaoyong He
2022-09-06 10:18       ` Ferruh Yigit
2022-08-12 10:22 ` Chaoyong He [this message]
2022-08-12 10:22 ` [PATCH v7 07/12] net/nfp: add flower ctrl VNIC related logics Chaoyong He
2022-08-12 10:22 ` [PATCH v7 08/12] net/nfp: move common rxtx function for flower use Chaoyong He
2022-08-12 10:22 ` [PATCH v7 09/12] net/nfp: add flower ctrl VNIC rxtx logic Chaoyong He
2022-09-05 15:42   ` Ferruh Yigit
2022-08-12 10:22 ` [PATCH v7 10/12] net/nfp: add flower representor framework Chaoyong He
2022-08-12 10:22 ` [PATCH v7 11/12] net/nfp: move rxtx function to header file Chaoyong He
2022-08-12 10:22 ` [PATCH v7 12/12] net/nfp: add flower PF rxtx logic Chaoyong He
2022-09-01 22:10 ` [PATCH v7 00/12] preparation for the rte_flow offload of nfp PMD Niklas Söderlund
2022-09-05 15:40 ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1660299750-10668-7-git-send-email-chaoyong.he@corigine.com \
    --to=chaoyong.he@corigine.com \
    --cc=dev@dpdk.org \
    --cc=niklas.soderlund@corigine.com \
    --cc=oss-drivers@corigine.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.