[PATCH V1 0/2] irqchip: Support to set irq type for ACPI path

[PATCH V1 0/2] irqchip: Support to set irq type for ACPI path

[Jianmin Lv]

For ACPI path of pch-pic and liointc driver, setting irq
type is not supported yet, so the patch series add code
to implement it.

Jianmin Lv (2):
  irqchip/loongson-pch-pic: Support to set irq type for ACPI path
  LoongArch: Support to set irq type for liointc

 drivers/acpi/pci_irq.c                 |  3 ++-
 drivers/irqchip/irq-loongson-liointc.c |  7 ++++++-
 drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
 3 files changed, 14 insertions(+), 6 deletions(-)

-- 
1.8.3.1

[PATCH V1 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path

[Jianmin Lv]

For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
the irq type in fwspec->param[1]. For supporting to set type for
irqs of the irqdomain, fwspec->param[1] should be used to get irq
type.

On Loongson platform, the irq trigger type of PCI devices is
high level, so high level triggered type is inputed to acpi_register_gsi
when create irq mapping for PCI devices.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/acpi/pci_irq.c                 |  3 ++-
 drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 08e1577..34483b3 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -393,7 +393,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	 * controller and must therefore be considered active high
 	 * as default.
 	 */
-	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
+	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
+		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
 				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
 	char *link = NULL;
 	char link_desc[16];
diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index b6f1392..5067010 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -177,13 +177,15 @@ static int pch_pic_domain_translate(struct irq_domain *d,
 	if (fwspec->param_count < 1)
 		return -EINVAL;
 
-	if (of_node) {
+	if (of_node)
 		*hwirq = fwspec->param[0] + priv->ht_vec_base;
-		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
-	} else {
+	else
 		*hwirq = fwspec->param[0] - priv->gsi_base;
+
+	if (fwspec->param_count > 1)
+		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+	else
 		*type = IRQ_TYPE_NONE;
-	}
 
 	return 0;
 }
-- 
1.8.3.1

[PATCH V1 2/2] irqchip/loongson-liointc: Support to set irq type for ACPI path

[Jianmin Lv]

For ACPI path, the xlate callback used IRQ_TYPE_NONE and ignored
the irq type in intspec[1]. For supporting to set type for
irqs of the irqdomain, intspec[1] should be used to get irq
type.

Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index c4f3c886a..24755537 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -167,7 +167,12 @@ static int liointc_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
 	if (WARN_ON(intsize < 1))
 		return -EINVAL;
 	*out_hwirq = intspec[0] - GSI_MIN_CPU_IRQ;
-	*out_type = IRQ_TYPE_NONE;
+
+	if (intsize > 1)
+		*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+	else
+		*out_type = IRQ_TYPE_NONE;
+
 	return 0;
 }
 
-- 
1.8.3.1

Re: [PATCH V1 0/2] irqchip: Support to set irq type for ACPI path

[Jianmin Lv]

Hi, Marc,

Is there anything in this patch series that needs to be changed?

Thanks.
Jianmin.


On 2022/8/16 上午10:01, Jianmin Lv wrote:
> For ACPI path of pch-pic and liointc driver, setting irq
> type is not supported yet, so the patch series add code
> to implement it.
> 
> Jianmin Lv (2):
>    irqchip/loongson-pch-pic: Support to set irq type for ACPI path
>    LoongArch: Support to set irq type for liointc
> 
>   drivers/acpi/pci_irq.c                 |  3 ++-
>   drivers/irqchip/irq-loongson-liointc.c |  7 ++++++-
>   drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
>   3 files changed, 14 insertions(+), 6 deletions(-)
> 

Re: [PATCH V1 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path

[Marc Zyngier]

On Mon, 15 Aug 2022 22:01:30 -0400,
Jianmin Lv <lvjianmin@loongson.cn> wrote:
> 
> For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
> the irq type in fwspec->param[1]. For supporting to set type for
> irqs of the irqdomain, fwspec->param[1] should be used to get irq
> type.
> 
> On Loongson platform, the irq trigger type of PCI devices is
> high level, so high level triggered type is inputed to acpi_register_gsi
> when create irq mapping for PCI devices.
> 
> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> ---
>  drivers/acpi/pci_irq.c                 |  3 ++-
>  drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
>  2 files changed, 8 insertions(+), 5 deletions(-)

$ ./scripts/get_maintainer.pl drivers/acpi/pci_irq.c 
Bjorn Helgaas <bhelgaas@google.com> (supporter:PCI SUBSYSTEM)
"Rafael J. Wysocki" <rafael@kernel.org> (supporter:ACPI)
Len Brown <lenb@kernel.org> (reviewer:ACPI)
linux-pci@vger.kernel.org (open list:PCI SUBSYSTEM)
linux-acpi@vger.kernel.org (open list:ACPI)
linux-kernel@vger.kernel.org (open list)

How about you start Cc-ing some of the relevant people?

>
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index 08e1577..34483b3 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -393,7 +393,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>  	 * controller and must therefore be considered active high
>  	 * as default.
>  	 */
> -	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
> +	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
> +		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
>  				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;

The comment just above this only talks about ARM. Should it be
updated? Is this a limitation of the underlying interrupt controller?

>  	char *link = NULL;
>  	char link_desc[16];
> diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
> index b6f1392..5067010 100644
> --- a/drivers/irqchip/irq-loongson-pch-pic.c
> +++ b/drivers/irqchip/irq-loongson-pch-pic.c
> @@ -177,13 +177,15 @@ static int pch_pic_domain_translate(struct irq_domain *d,
>  	if (fwspec->param_count < 1)
>  		return -EINVAL;
>  
> -	if (of_node) {
> +	if (of_node)
>  		*hwirq = fwspec->param[0] + priv->ht_vec_base;
> -		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> -	} else {
> +	else
>  		*hwirq = fwspec->param[0] - priv->gsi_base;
> +
> +	if (fwspec->param_count > 1)
> +		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> +	else
>  		*type = IRQ_TYPE_NONE;

Isn't that a change in behaviour if of_node is non-NULL and
param_count==1?

> -	}
>  
>  	return 0;
>  }

This irqchip change should probably be a separate patch.

	M.

-- 
Without deviation from the norm, progress is not possible.

Re: [PATCH V1 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path

[Jianmin Lv]

On 2022/9/28 下午10:49, Marc Zyngier wrote:
> On Mon, 15 Aug 2022 22:01:30 -0400,
> Jianmin Lv <lvjianmin@loongson.cn> wrote:
>>
>> For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
>> the irq type in fwspec->param[1]. For supporting to set type for
>> irqs of the irqdomain, fwspec->param[1] should be used to get irq
>> type.
>>
>> On Loongson platform, the irq trigger type of PCI devices is
>> high level, so high level triggered type is inputed to acpi_register_gsi
>> when create irq mapping for PCI devices.
>>
>> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
>> ---
>>   drivers/acpi/pci_irq.c                 |  3 ++-
>>   drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
>>   2 files changed, 8 insertions(+), 5 deletions(-)
> 
> $ ./scripts/get_maintainer.pl drivers/acpi/pci_irq.c
> Bjorn Helgaas <bhelgaas@google.com> (supporter:PCI SUBSYSTEM)
> "Rafael J. Wysocki" <rafael@kernel.org> (supporter:ACPI)
> Len Brown <lenb@kernel.org> (reviewer:ACPI)
> linux-pci@vger.kernel.org (open list:PCI SUBSYSTEM)
> linux-acpi@vger.kernel.org (open list:ACPI)
> linux-kernel@vger.kernel.org (open list)
> 
> How about you start Cc-ing some of the relevant people?
> 
Ok, thanks, I'll cc relevant people list here.

>>
>> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
>> index 08e1577..34483b3 100644
>> --- a/drivers/acpi/pci_irq.c
>> +++ b/drivers/acpi/pci_irq.c
>> @@ -393,7 +393,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>>   	 * controller and must therefore be considered active high
>>   	 * as default.
>>   	 */
>> -	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
>> +	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
>> +		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
>>   				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
> 
> The comment just above this only talks about ARM. Should it be
> updated? 

Ok, I'll update the comment.


Is this a limitation of the underlying interrupt controller?
> 
It's the limitation that pci interrupt source of LoongArch only sends 
high level trigger signal to interrupt controller(though, pci spec 
requires asserted low).


>>   	char *link = NULL;
>>   	char link_desc[16];
>> diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
>> index b6f1392..5067010 100644
>> --- a/drivers/irqchip/irq-loongson-pch-pic.c
>> +++ b/drivers/irqchip/irq-loongson-pch-pic.c
>> @@ -177,13 +177,15 @@ static int pch_pic_domain_translate(struct irq_domain *d,
>>   	if (fwspec->param_count < 1)
>>   		return -EINVAL;
>>   
>> -	if (of_node) {
>> +	if (of_node)
>>   		*hwirq = fwspec->param[0] + priv->ht_vec_base;
>> -		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>> -	} else {
>> +	else
>>   		*hwirq = fwspec->param[0] - priv->gsi_base;
>> +
>> +	if (fwspec->param_count > 1)
>> +		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>> +	else
>>   		*type = IRQ_TYPE_NONE;
> 
> Isn't that a change in behaviour if of_node is non-NULL and
> param_count==1?
> 

It seems that current code here has bug that if fwspec->param_count==1 
and of_node is non-null, fwspec->param[1] will be accessed, which is 
introduced from previous patch(irqchip/loongson-pch-pic: Add ACPI init 
support). Before the patch, for non-null of_node, translate callback(use 
irq_domain_translate_twocell) will return -EINVAL if fwspec->param_count 
< 2.

For ACPI path, fwspec->param_count can be 1 or 2.

So in this patch, I'll fix the bug and change the code as following:

         if (fwspec->param_count < 1)
                 return -EINVAL;

         if (of_node) {
                 if (fwspec->param_count < 2)
                         return -EINVAL;

                 *hwirq = fwspec->param[0] + priv->ht_vec_base;
                 *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
         } else {
                 *hwirq = fwspec->param[0] - priv->gsi_base;

                 if (fwspec->param_count > 1)
                         *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
                 else
                         *type = IRQ_TYPE_NONE;
         }


>> -	}
>>   
>>   	return 0;
>>   }
> 
> This irqchip change should probably be a separate patch.
> 

As a separate patch, the input trigger type of pci devices will be low 
level because of lacking of workaround to acpi_pci_irq_enable, which 
will cause kernel hang, unless the patch of workaround to 
acpi_pci_irq_enable is in front of this separated patch.


> 	M.
> 

Re: [PATCH V1 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path

[Marc Zyngier]

On Wed, 28 Sep 2022 22:35:17 -0400,
Jianmin Lv <lvjianmin@loongson.cn> wrote:
>
> On 2022/9/28 下午10:49, Marc Zyngier wrote:
> > On Mon, 15 Aug 2022 22:01:30 -0400,
> > Jianmin Lv <lvjianmin@loongson.cn> wrote:
> >> 
> >> For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
> >> the irq type in fwspec->param[1]. For supporting to set type for
> >> irqs of the irqdomain, fwspec->param[1] should be used to get irq
> >> type.
> >> 
> >> On Loongson platform, the irq trigger type of PCI devices is
> >> high level, so high level triggered type is inputed to acpi_register_gsi
> >> when create irq mapping for PCI devices.
> >> 
> >> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> >> ---
> >>   drivers/acpi/pci_irq.c                 |  3 ++-
> >>   drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
> >>   2 files changed, 8 insertions(+), 5 deletions(-)
> > 
> > $ ./scripts/get_maintainer.pl drivers/acpi/pci_irq.c
> > Bjorn Helgaas <bhelgaas@google.com> (supporter:PCI SUBSYSTEM)
> > "Rafael J. Wysocki" <rafael@kernel.org> (supporter:ACPI)
> > Len Brown <lenb@kernel.org> (reviewer:ACPI)
> > linux-pci@vger.kernel.org (open list:PCI SUBSYSTEM)
> > linux-acpi@vger.kernel.org (open list:ACPI)
> > linux-kernel@vger.kernel.org (open list)
> > 
> > How about you start Cc-ing some of the relevant people?
> > 
> Ok, thanks, I'll cc relevant people list here.
> 
> >> 
> >> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> >> index 08e1577..34483b3 100644
> >> --- a/drivers/acpi/pci_irq.c
> >> +++ b/drivers/acpi/pci_irq.c
> >> @@ -393,7 +393,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
> >>   	 * controller and must therefore be considered active high
> >>   	 * as default.
> >>   	 */
> >> -	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
> >> +	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
> >> +		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
> >>   				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
> > 
> > The comment just above this only talks about ARM. Should it be
> > updated? 
> 
> Ok, I'll update the comment.
> 
> 
> > Is this a limitation of the underlying interrupt controller?
> > 
> It's the limitation that pci interrupt source of LoongArch only sends
> high level trigger signal to interrupt controller(though, pci spec
> requires asserted low).

Right, so this is the opposite problem ARM has.

But is it *always* intended to be built like this? Or is it a one-off
for this generation of Loongarch systems, to be fixed at a later time?

> 
> 
> >>   	char *link = NULL;
> >>   	char link_desc[16];
> >> diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
> >> index b6f1392..5067010 100644
> >> --- a/drivers/irqchip/irq-loongson-pch-pic.c
> >> +++ b/drivers/irqchip/irq-loongson-pch-pic.c
> >> @@ -177,13 +177,15 @@ static int pch_pic_domain_translate(struct irq_domain *d,
> >>   	if (fwspec->param_count < 1)
> >>   		return -EINVAL;
> >>   -	if (of_node) {
> >> +	if (of_node)
> >>   		*hwirq = fwspec->param[0] + priv->ht_vec_base;
> >> -		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> >> -	} else {
> >> +	else
> >>   		*hwirq = fwspec->param[0] - priv->gsi_base;
> >> +
> >> +	if (fwspec->param_count > 1)
> >> +		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> >> +	else
> >>   		*type = IRQ_TYPE_NONE;
> > 
> > Isn't that a change in behaviour if of_node is non-NULL and
> > param_count==1?
> > 
> 
> It seems that current code here has bug that if fwspec->param_count==1
> and of_node is non-null, fwspec->param[1] will be accessed, which is
> introduced from previous patch(irqchip/loongson-pch-pic: Add ACPI init
> support). Before the patch, for non-null of_node, translate
> callback(use irq_domain_translate_twocell) will return -EINVAL if
> fwspec->param_count < 2.
> 
> For ACPI path, fwspec->param_count can be 1 or 2.
> 
> So in this patch, I'll fix the bug and change the code as following:
> 
>         if (fwspec->param_count < 1)
>                 return -EINVAL;
> 
>         if (of_node) {
>                 if (fwspec->param_count < 2)
>                         return -EINVAL;
> 
>                 *hwirq = fwspec->param[0] + priv->ht_vec_base;
>                 *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>         } else {
>                 *hwirq = fwspec->param[0] - priv->gsi_base;
> 
>                 if (fwspec->param_count > 1)
>                         *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>                 else
>                         *type = IRQ_TYPE_NONE;
>         }
>
> 
> >> -	}
> >>     	return 0;
> >>   }
> > 
> > This irqchip change should probably be a separate patch.
> > 
> 
> As a separate patch, the input trigger type of pci devices will be low
> level because of lacking of workaround to acpi_pci_irq_enable, which
> will cause kernel hang, unless the patch of workaround to
> acpi_pci_irq_enable is in front of this separated patch.

That seems like a sensible requirement, but I really want to
understand whether PCI Loongarch will *always* generate INTx as
ACTIVE_HIGH or not. Because if that is ever going to change, we will
need a different way to inform the irqchip about the polarity
inversion.

	M.

-- 
Without deviation from the norm, progress is not possible.

Re: [PATCH V1 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path

[Jianmin Lv]

On 2022/9/29 下午5:44, Marc Zyngier wrote:
> On Wed, 28 Sep 2022 22:35:17 -0400,
> Jianmin Lv <lvjianmin@loongson.cn> wrote:
>>
>> On 2022/9/28 下午10:49, Marc Zyngier wrote:
>>> On Mon, 15 Aug 2022 22:01:30 -0400,
>>> Jianmin Lv <lvjianmin@loongson.cn> wrote:
>>>>
>>>> For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored
>>>> the irq type in fwspec->param[1]. For supporting to set type for
>>>> irqs of the irqdomain, fwspec->param[1] should be used to get irq
>>>> type.
>>>>
>>>> On Loongson platform, the irq trigger type of PCI devices is
>>>> high level, so high level triggered type is inputed to acpi_register_gsi
>>>> when create irq mapping for PCI devices.
>>>>
>>>> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
>>>> ---
>>>>    drivers/acpi/pci_irq.c                 |  3 ++-
>>>>    drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++++----
>>>>    2 files changed, 8 insertions(+), 5 deletions(-)
>>>
>>> $ ./scripts/get_maintainer.pl drivers/acpi/pci_irq.c
>>> Bjorn Helgaas <bhelgaas@google.com> (supporter:PCI SUBSYSTEM)
>>> "Rafael J. Wysocki" <rafael@kernel.org> (supporter:ACPI)
>>> Len Brown <lenb@kernel.org> (reviewer:ACPI)
>>> linux-pci@vger.kernel.org (open list:PCI SUBSYSTEM)
>>> linux-acpi@vger.kernel.org (open list:ACPI)
>>> linux-kernel@vger.kernel.org (open list)
>>>
>>> How about you start Cc-ing some of the relevant people?
>>>
>> Ok, thanks, I'll cc relevant people list here.
>>
>>>>
>>>> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
>>>> index 08e1577..34483b3 100644
>>>> --- a/drivers/acpi/pci_irq.c
>>>> +++ b/drivers/acpi/pci_irq.c
>>>> @@ -393,7 +393,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>>>>    	 * controller and must therefore be considered active high
>>>>    	 * as default.
>>>>    	 */
>>>> -	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
>>>> +	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ||
>>>> +		       acpi_irq_model == ACPI_IRQ_MODEL_LPIC ?
>>>>    				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
>>>
>>> The comment just above this only talks about ARM. Should it be
>>> updated?
>>
>> Ok, I'll update the comment.
>>
>>
>>> Is this a limitation of the underlying interrupt controller?
>>>
>> It's the limitation that pci interrupt source of LoongArch only sends
>> high level trigger signal to interrupt controller(though, pci spec
>> requires asserted low).
> 
> Right, so this is the opposite problem ARM has.
> 
> But is it *always* intended to be built like this? Or is it a one-off
> for this generation of Loongarch systems, to be fixed at a later time?
> 

Yes, new generations will always keep this unchanged.

>>
>>
>>>>    	char *link = NULL;
>>>>    	char link_desc[16];
>>>> diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
>>>> index b6f1392..5067010 100644
>>>> --- a/drivers/irqchip/irq-loongson-pch-pic.c
>>>> +++ b/drivers/irqchip/irq-loongson-pch-pic.c
>>>> @@ -177,13 +177,15 @@ static int pch_pic_domain_translate(struct irq_domain *d,
>>>>    	if (fwspec->param_count < 1)
>>>>    		return -EINVAL;
>>>>    -	if (of_node) {
>>>> +	if (of_node)
>>>>    		*hwirq = fwspec->param[0] + priv->ht_vec_base;
>>>> -		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>>>> -	} else {
>>>> +	else
>>>>    		*hwirq = fwspec->param[0] - priv->gsi_base;
>>>> +
>>>> +	if (fwspec->param_count > 1)
>>>> +		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>>>> +	else
>>>>    		*type = IRQ_TYPE_NONE;
>>>
>>> Isn't that a change in behaviour if of_node is non-NULL and
>>> param_count==1?
>>>
>>
>> It seems that current code here has bug that if fwspec->param_count==1
>> and of_node is non-null, fwspec->param[1] will be accessed, which is
>> introduced from previous patch(irqchip/loongson-pch-pic: Add ACPI init
>> support). Before the patch, for non-null of_node, translate
>> callback(use irq_domain_translate_twocell) will return -EINVAL if
>> fwspec->param_count < 2.
>>
>> For ACPI path, fwspec->param_count can be 1 or 2.
>>
>> So in this patch, I'll fix the bug and change the code as following:
>>
>>          if (fwspec->param_count < 1)
>>                  return -EINVAL;
>>
>>          if (of_node) {
>>                  if (fwspec->param_count < 2)
>>                          return -EINVAL;
>>
>>                  *hwirq = fwspec->param[0] + priv->ht_vec_base;
>>                  *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>>          } else {
>>                  *hwirq = fwspec->param[0] - priv->gsi_base;
>>
>>                  if (fwspec->param_count > 1)
>>                          *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
>>                  else
>>                          *type = IRQ_TYPE_NONE;
>>          }
>>
>>
>>>> -	}
>>>>      	return 0;
>>>>    }
>>>
>>> This irqchip change should probably be a separate patch.
>>>
>>
>> As a separate patch, the input trigger type of pci devices will be low
>> level because of lacking of workaround to acpi_pci_irq_enable, which
>> will cause kernel hang, unless the patch of workaround to
>> acpi_pci_irq_enable is in front of this separated patch.
> 
> That seems like a sensible requirement, but I really want to
> understand whether PCI Loongarch will *always* generate INTx as
> ACTIVE_HIGH or not. Because if that is ever going to change, we will
> need a different way to inform the irqchip about the polarity
> inversion.
> 

Above same. And in future, in case some generation use ACTIVE_LOW, I 
think we can use use *Source*(means link) with triggering and polarity 
property in pci route table of DSDT as following code to override 
ACTIVE_HIGH, rather than *Source index*(gsi).

       if (entry->link)
             gsi = acpi_pci_link_allocate_irq(entry->link,
                                               entry->index,
                                               &triggering, &polarity,
                                               &link);


Because of a lot of machines outside have been shipped with firmware 
using *Source index*, for compatibility with such firmware, the 
workaround to acpi_pci_irq_enable is required.


> 	M.
>