| Series: | drm/i915/display: Enable VDIP Enable VSC whenever GMP DIP enabled (rev2) |
| URL: | https://patchwork.freedesktop.org/series/111835/ |
| State: | success |
| Details: | https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_111835v2/index.html |
SUCCESS
No regressions found.
No changes in participating hosts
New tests have been introduced between CI_DRM_12491_full and Patchwork_111835v2_full:
igt@kms_atomic_interruptible@universal-setplane-cursor@hdmi-a-1-pipe-a:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-linear-to-linear:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-linear-to-x:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-linear-to-y:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-linear-to-y-rc_ccs:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-linear-to-y-rc_ccs-cc:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-x-to-linear:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-x-to-x:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-x-to-y:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-x-to-y-rc_ccs:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-x-to-y-rc_ccs-cc:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-cc-to-linear:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-cc-to-x:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-cc-to-y:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-cc-to-y-rc_ccs:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-cc-to-y-rc_ccs-cc:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-to-linear:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-to-x:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-to-y:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-to-y-rc_ccs:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-rc_ccs-to-y-rc_ccs-cc:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-to-linear:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-to-x:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-to-y:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-to-y-rc_ccs:
igt@kms_flip_tiling@flip-change-tiling@hdmi-a-1-pipe-d-y-to-y-rc_ccs-cc:
Here are the changes found in Patchwork_111835v2_full that come from known issues:
igt@feature_discovery@psr2:
igt@gem_ctx_exec@basic-nohangcheck:
igt@gem_ctx_persistence@engines-hostile:
igt@gem_ctx_persistence@hang:
igt@gem_exec_fair@basic-deadline:
igt@gem_exec_fence@syncobj-export:
igt@gem_exec_schedule@deep@vcs0:
igt@gem_lmem_swapping@heavy-verify-multi:
igt@gem_pwrite@basic-exhaustion:
igt@gem_tiled_wb:
igt@gen9_exec_parse@allowed-single:
igt@i915_pm_rpm@system-suspend:
igt@kms_ccs@pipe-a-bad-pixel-format-y_tiled_gen12_rc_ccs_cc:
igt@kms_ccs@pipe-c-ccs-on-another-bo-yf_tiled_ccs:
igt@kms_chamelium@dp-hpd-with-enabled-mode:
igt@kms_chamelium@hdmi-aspect-ratio:
igt@kms_color_chamelium@ctm-0-50:
igt@kms_content_protection@legacy@pipe-a-dp-1:
igt@kms_cursor_crc@cursor-suspend@pipe-b-edp-1:
igt@kms_flip@flip-vs-expired-vblank-interruptible@c-edp1:
igt@kms_flip@flip-vs-suspend@a-dp1:
igt@kms_flip@plain-flip-fb-recreate@b-edp1:
igt@kms_flip_scaled_crc@flip-32bpp-ytileccs-to-64bpp-ytile-downscaling@pipe-a-default-mode:
igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-16bpp-4tile-downscaling@pipe-a-valid-mode:
igt@kms_flip_scaled_crc@flip-64bpp-4tile-to-32bpp-4tiledg2rcccs-upscaling@pipe-a-default-mode:
igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytile-downscaling@pipe-a-default-mode:
igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-mmap-wc:
igt@kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-5@pipe-b-edp-1:
igt@kms_psr2_sf@overlay-plane-move-continuous-exceed-fully-sf:
igt@kms_psr@psr2_cursor_mmap_gtt:
igt@kms_psr_stress_test@invalidate-primary-flip-overlay:
igt@kms_writeback@writeback-check-output:
igt@sysfs_clients@sema-50:
igt@gem_ctx_exec@basic-nohangcheck:
igt@gem_ctx_persistence@legacy-engines-hang@blt:
igt@gem_exec_balancer@fairslice:
igt@gem_exec_balancer@parallel-contexts:
igt@gem_exec_reloc@basic-write-gtt:
igt@gem_mmap_wc@set-cache-level:
igt@gem_readwrite@write-bad-handle:
igt@gem_softpin@evict-single-offset:
igt@gem_softpin@noreloc-s3:
igt@i915_pm_rc6_residency@rc6-idle@bcs0:
igt@i915_pm_rpm@dpms-non-lpsp:
igt@i915_selftest@live@gt_heartbeat:
igt@i915_suspend@fence-restore-untiled:
igt@kms_big_fb@y-tiled-32bpp-rotate-180:
igt@kms_flip@flip-vs-expired-vblank-interruptible@b-edp1:
igt@kms_flip@flip-vs-expired-vblank@c-hdmi-a2:
igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-move:
igt@kms_pipe_crc_basic@suspend-read-crc@pipe-c-edp-1:
igt@kms_plane_scaling@planes-downscale-factor-0-5@pipe-a-edp-1:
igt@kms_properties@plane-properties-legacy:
igt@kms_psr@basic:
igt@kms_universal_plane@universal-plane-pageflip-windowed-pipe-a:
igt@kms_vblank@pipe-b-query-idle:
igt@kms_vblank@pipe-c-ts-continuation-suspend:
igt@perf@mi-rpc:
igt@perf_pmu@rc6-suspend:
igt@sysfs_timeslice_duration@timeout@rcs0:
igt@gem_exec_balancer@parallel-ordering:
igt@kms_psr2_sf@overlay-plane-move-continuous-sf:
igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-big-fb:
igt@runner@aborted:
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
CI-20190529: 20190529
CI_DRM_12491: d322881f7e33af24901ee8ccaec3beef82f21203 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7090: 5aafcf060b6dfbb2fa7aace76c8074d98ac7da8f @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_111835v2: d322881f7e33af24901ee8ccaec3beef82f21203 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit