From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754711AbaCCPHN (ORCPT ); Mon, 3 Mar 2014 10:07:13 -0500 Received: from mailout3.w1.samsung.com ([210.118.77.13]:34324 "EHLO mailout3.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754615AbaCCPHJ (ORCPT ); Mon, 3 Mar 2014 10:07:09 -0500 X-AuditID: cbfec7f4-b7f796d000005a13-49-53149a9ac902 From: Kamil Debski To: "'Kishon Vijay Abraham I'" , linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org Cc: kyungmin.park@samsung.com, Tomasz Figa , Sylwester Nawrocki , Marek Szyprowski , gautam.vivek@samsung.com, mat.krawczuk@gmail.com, yulgon.kim@samsung.com, p.paneri@samsung.com, av.tikhomirov@samsung.com, jg1.han@samsung.com, galak@codeaurora.org, matt.porter@linaro.org, tjakobi@math.uni-bielefeld.de, stern@rowland.harvard.edu References: <1391016574-25237-1-git-send-email-k.debski@samsung.com> <1391016574-25237-6-git-send-email-k.debski@samsung.com> <53149155.4010209@ti.com> In-reply-to: <53149155.4010209@ti.com> Subject: RE: [PATCH v6 5/8] phy: Add new Exynos USB PHY driver Date: Mon, 03 Mar 2014 16:07:04 +0100 Message-id: <16eb01cf36f2$3da91370$b8fb3a50$%debski@samsung.com> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 Thread-index: Ac827MTcMTvOBOuxRviG17FqZBiSdgABFS0w Content-language: pl X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFlrHIsWRmVeSWpSXmKPExsVy+t/xq7qzZokEGzzbK2WxZPcNVov5R86x WvS/Wchq0XblILvF5YWXWC0uPO1hszjb9AbI3TWHzWLG+X1MFouWtTJbrD1yl93ibP9tNouJ TdPYLc5v6WSyOPymndViwu8LbBbrZ7xmsWhb/YHVouPsQXYHYY/Lfb1MHjtn3WX3uHNtD5vH v2PsHrPv/mD06NuyitHj+I3tTB6fN8kFcERx2aSk5mSWpRbp2yVwZez4KFkw7wxTReOBpYwN jNPbmLoYOTkkBEwkdi69B2WLSVy4t56ti5GLQ0hgKaPEuVdHoJwGJonF/24BORwcbAKaEqvu eYDERQRWMEoceHCcGcRhFpjLLLFl32IWiI7ZjBLP3h5nBZnLKaAm8frFU3YQW1jATmLm/ANg cRYBVYnFBx+wgNi8Ag4S7yeeZIawBSV+TL4HFmcW0JJYv/M4E4QtL7F5zVtmkCskBNQlHv3V BQmLCBhJHLy0CKpcROJuw3PWCYxCs5BMmoVk0iwkk2YhaVnAyLKKUTS1NLmgOCk911CvODG3 uDQvXS85P3cTIySOv+xgXHzM6hCjAAejEg+vwxSRYCHWxLLiytxDjBIczEoivBE1QCHelMTK qtSi/Pii0pzU4kOMTBycUg2MEl3Tou/I5AY1xqYe8JJe6dSzJvGb8IT41Q3Nb5smdjgHvz/A GLCMacPh6cHsmn86LiWvWTb7a5LLyw+sx/e0T7CwT2nhjT0fbNK113N+45cbHpGXY6elfowu 3DTrSPmkKgm+vf3Llsd+TczcdP3W+wIep83996x2XcpXmXrkV1TJspMiOxq3KbEUZyQaajEX FScCAPkl8uHBAgAA Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Kishon, > From: Kishon Vijay Abraham I [mailto:kishon@ti.com] > Sent: Monday, March 03, 2014 3:28 PM > > Hi, > > On Wednesday 29 January 2014 10:59 PM, Kamil Debski wrote: > > Add a new driver for the Exynos USB PHY. The new driver uses the > > generic PHY framework. The driver includes support for the Exynos > 4x10 > > and 4x12 SoC families. > > Can the PHY part of this series be merged independently of the > controller part? I see no problems with merging the PHY part independently. However, I would like to post an updated version of these patches. I am working on them now and should send them tomorrow. Best wishes, -- Kamil Debski Samsung R&D Institute Poland > > > > Signed-off-by: Kamil Debski > > --- > > .../devicetree/bindings/phy/samsung-phy.txt | 55 ++++ > > Documentation/phy/samsung-usb2.txt | 135 ++++++++ > > drivers/phy/Kconfig | 29 ++ > > drivers/phy/Makefile | 3 + > > drivers/phy/phy-exynos4210-usb2.c | 257 > ++++++++++++++++ > > drivers/phy/phy-exynos4x12-usb2.c | 323 > ++++++++++++++++++++ > > drivers/phy/phy-samsung-usb2.c | 227 > ++++++++++++++ > > drivers/phy/phy-samsung-usb2.h | 67 ++++ > > 8 files changed, 1096 insertions(+) > > create mode 100644 Documentation/phy/samsung-usb2.txt > > create mode 100644 drivers/phy/phy-exynos4210-usb2.c > > create mode 100644 drivers/phy/phy-exynos4x12-usb2.c > > create mode 100644 drivers/phy/phy-samsung-usb2.c > > create mode 100644 drivers/phy/phy-samsung-usb2.h > > > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt > > b/Documentation/devicetree/bindings/phy/samsung-phy.txt > > index c0fccaa..6668c41 100644 > > --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt > > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > > @@ -20,3 +20,58 @@ Required properties: > > - compatible : should be "samsung,exynos5250-dp-video-phy"; > > - reg : offset and length of the Display Port PHY register set; > > - #phy-cells : from the generic PHY bindings, must be 0; > > + > > +Samsung S5P/EXYNOS SoC series USB PHY > > +------------------------------------------------- > > + > > +Required properties: > > +- compatible : should be one of the listed compatibles: > > + - "samsung,exynos4210-usb2-phy" > > + - "samsung,exynos4x12-usb2-phy" > > +- reg : a list of registers used by phy driver > > + - first and obligatory is the location of phy modules registers > > +- samsung,sysreg-phandle - handle to syscon used to control the > > +system registers > > +- samsung,pmureg-phandle - handle to syscon used to control PMU > > +registers > > +- #phy-cells : from the generic phy bindings, must be 1; > > +- clocks and clock-names: > > + - the "phy" clocks is required by the phy module > > + - next for each of the phys a clock has to be assigned, this > clock > > + will be used to determine clocking frequency for the phys > > + (the labels are specified in the paragraph below) > > + > > +The first phandle argument in the PHY specifier identifies the PHY, > > +its meaning is compatible dependent. For the currently supported > SoCs > > +(Exynos 4210 and Exynos 4212) it is as follows: > > + 0 - USB device ("device"), > > + 1 - USB host ("host"), > > + 2 - HSIC0 ("hsic0"), > > + 3 - HSIC1 ("hsic1"), > > + > > +Exynos 4210 and Exynos 4212 use mode switching and require that mode > > +switch register is supplied. > > + > > +Example: > > + > > +For Exynos 4412 (compatible with Exynos 4212): > > + > > +usbphy: phy@125b0000 { > > + compatible = "samsung,exynos4212-usb2-phy"; > > + reg = <0x125b0000 0x100 0x10020704 0x0c 0x1001021c 0x4>; > > + clocks = <&clock 305>, <&clock 2>, <&clock 2>, <&clock 2>, > > + <&clock 2>; > > + clock-names = "phy", "device", "host", "hsic0", "hsic1"; > > + status = "okay"; > > + #phy-cells = <1>; > > + samsung,sysreg-phandle = <&sys_reg>; > > + samsung,pmureg-phandle = <&pmu_reg>; }; > > + > > +Then the PHY can be used in other nodes such as: > > + > > +phy-consumer@12340000 { > > + phys = <&usbphy 2>; > > + phy-names = "phy"; > > +}; > > + > > +Refer to DT bindings documentation of particular PHY consumer > devices > > +for more information about required PHYs and the way of > specification. > > diff --git a/Documentation/phy/samsung-usb2.txt > > b/Documentation/phy/samsung-usb2.txt > > new file mode 100644 > > index 0000000..9f5826e > > --- /dev/null > > +++ b/Documentation/phy/samsung-usb2.txt > > @@ -0,0 +1,135 @@ > > +.------------------------------------------------------------------- > - > > +----------+ > > +| Samsung USB 2.0 PHY adaptation layer > | > > ++------------------------------------------------------------------- > ----------+' > > + > > +| 1. Description > > ++---------------- > > + > > +The architecture of the USB 2.0 PHY module in Samsung SoCs is > similar > > +among many SoCs. In spite of the similarities it proved difficult to > > +create a one driver that would fit all these PHY controllers. Often > > +the differences were minor and were found in particular bits of the > > +registers of the PHY. In some rare cases the order of register > writes > > +or the PHY powering up process had to be altered. This adaptation > > +layer is a compromise between having separate drivers and having a > > +single driver with added support for many special cases. > > + > > +| 2. Files description > > ++---------------------- > > + > > +- phy-samsung-usb2.c > > + This is the main file of the adaptation layer. This file contains > > + the probe function and provides two callbacks to the Generic PHY > > + Framework. This two callbacks are used to power on and power off > the > > + phy. They carry out the common work that has to be done on all > version > > + of the PHY module. Depending on which SoC was chosen they execute > SoC > > + specific callbacks. The specific SoC version is selected by > choosing > > + the appropriate compatible string. In addition, this file > contains > > + struct of_device_id definitions for particular SoCs. > > + > > +- phy-samsung-usb2.h > > + This is the include file. It declares the structures used by this > > + driver. In addition it should contain extern declarations for > > + structures that describe particular SoCs. > > + > > +| 3. Supporting SoCs > > ++-------------------- > > + > > +To support a new SoC a new file should be added to the drivers/phy > > +directory. Each SoC's configuration is stored in an instance of the > > +struct samsung_usb2_phy_config. > > + > > +struct samsung_usb2_phy_config { > > + const struct samsung_usb2_common_phy *phys; > > + unsigned int num_phys; > > + bool has_mode_switch; > > +}; > > + > > +The num_phys is the number of phys handled by the driver. *phys is > an > > +array that contains the configuration for each phy. The > > +has_mode_switch property is a boolean flag that determines whether > > +the SoC has USB host and device on a single pair of pins. If so, a > > +special register has to be modified to change the internal routing > of > > +these pins between a USB device or host module. > > + > > +For example the configuration for Exynos 4210 is following: > > + > > +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { > > + .num_phys = EXYNOS4210_NUM_PHYS, > > + .phys = exynos4210_phys, > > +} > > + > > +The exynos4210_phys configuration array is as follows: > > + > > +static const struct samsung_usb2_common_phy exynos4210_phys[] = { > > + { > > + .label = "device", > > + .id = EXYNOS4210_DEVICE, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "host", > > + .id = EXYNOS4210_HOST, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .id = EXYNOS4210_HSIC0, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .id = EXYNOS4210_HSIC1, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + {}, > > +}; > > + > > +- int (*rate_to_clk)(unsigned long, u32 *) > > + The rate_to_clk callback is to convert the rate of the clock > > + used to clock the module to the value that should be written to > > + the registers of the PHY module. > > +- int (*power_on)(struct samsung_usb2_phy_instance *); > > +- int (*power_off)(struct samsung_usb2_phy_instance *); > > + These two callbacks are used to power on and power off the phy > > + by modifying appropriate registers. > > + > > +Final change to the driver is adding appropriate compatible value to > > +the phy-samsung-usb2.c file. In case of Exynos 4210 the following > > +lines were added to the struct of_device_id > samsung_usb2_phy_of_match[] array: > > + > > +#ifdef CONFIG_PHY_EXYNOS4210_USB2 > > + { > > + .compatible = "samsung,exynos4210-usb2-phy", > > + .data = &exynos4210_usb2_phy_config, > > + }, > > +#endif > > + > > +To add further flexibility to the driver the Kconfig file enables to > > +include support for selected SoCs in the compiled driver. The > Kconfig > > +entry for Exynos 4210 is following: > > + > > +config PHY_EXYNOS4210_USB2 > > + bool "Support for Exynos 4210" > > + depends on PHY_SAMSUNG_USB2 > > + depends on CPU_EXYNOS4210 > > + help > > + Enable USB PHY support for Exynos 4210. This option requires > that > > + Samsung USB 2.0 PHY driver is enabled and means that support > for this > > + particular SoC is compiled in the driver. In case of Exynos > 4210 four > > + phys are available - device, host, HSCI0 and HSCI1. > > + > > +The newly created file that supports the new SoC has to be also > added > > +to the Makefile. In case of Exynos 4210 the added line is following: > > + > > +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > > + > > +After completing these steps the support for the new SoC should be > ready. > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index > > b901c47..3691d24 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -63,4 +63,33 @@ config BCM_KONA_USB2_PHY > > help > > Enable this to support the Broadcom Kona USB 2.0 PHY. > > > > +config PHY_SAMSUNG_USB2 > > + tristate "Samsung USB 2.0 PHY driver" > > + select GENERIC_PHY > > + select MFD_SYSCON > > + help > > + Enable this to support the Samsung USB 2.0 PHY driver for > Samsung > > + SoCs. This driver provides the interface for USB 2.0 PHY. > Support for > > + particular SoCs has to be enabled in addition to this driver. > Number > > + and type of supported phys depends on the SoC. > > + > > +config PHY_EXYNOS4210_USB2 > > + bool "Support for Exynos 4210" > > + depends on PHY_SAMSUNG_USB2 > > + depends on CPU_EXYNOS4210 > > + help > > + Enable USB PHY support for Exynos 4210. This option requires > that > > + Samsung USB 2.0 PHY driver is enabled and means that support > for this > > + particular SoC is compiled in the driver. In case of Exynos > 4210 four > > + phys are available - device, host, HSIC0 and HSIC1. > > + > > +config PHY_EXYNOS4X12_USB2 > > + bool "Support for Exynos 4x12" > > + depends on PHY_SAMSUNG_USB2 > > + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) > > + help > > + Enable USB PHY support for Exynos 4x12. This option requires > that > > + Samsung USB 2.0 PHY driver is enabled and means that support > for this > > + particular SoC is compiled in the driver. In case of Exynos > 4x12 four > > + phys are available - device, host, HSIC0 and HSIC1. > > endmenu > > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index > > b57c253..69d0b3f2 100644 > > --- a/drivers/phy/Makefile > > +++ b/drivers/phy/Makefile > > @@ -9,3 +9,6 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy- > exynos-mipi-video.o > > obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > > obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > > obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > > +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o > > +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > > +obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > > diff --git a/drivers/phy/phy-exynos4210-usb2.c > > b/drivers/phy/phy-exynos4210-usb2.c > > new file mode 100644 > > index 0000000..8f86abf > > --- /dev/null > > +++ b/drivers/phy/phy-exynos4210-usb2.c > > @@ -0,0 +1,257 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include "phy-samsung-usb2.h" > > + > > +/* Exynos USB PHY registers */ > > + > > +/* PHY power control */ > > +#define EXYNOS_4210_UPHYPWR 0x0 > > + > > +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) > > +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) > > +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) > > +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) > > +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ > > + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ > > + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ > > + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) > > + > > +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) > > +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) > > +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) > > +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ > > + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ > > + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) > > + > > +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) > > +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) > > +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ > > + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) > > + > > +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) > > +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) > > +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ > > + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) > > + > > +/* PHY clock control */ > > +#define EXYNOS_4210_UPHYCLK 0x4 > > + > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) > > + > > +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) > > +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) > > +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) > > + > > +/* PHY reset control */ > > +#define EXYNOS_4210_UPHYRST 0x8 > > + > > +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) > > +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) > > +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) > > +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) > > +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) > > +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) > > + > > +/* Isolation, configured in the power management unit */ > > +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 > > +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) > > +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 > > +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) > > + > > +/* USBYPHY1 Floating prevention */ > > +#define EXYNOS_4210_UPHY1CON 0x34 > > +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 > > + > > +/* Mode switching SUB Device <-> Host */ > > +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c > > +#define EXYNOS_4210_MODE_SWITCH_MASK 1 > > +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 > > +#define EXYNOS_4210_MODE_SWITCH_HOST 1 > > + > > +enum exynos4210_phy_id { > > + EXYNOS4210_DEVICE, > > + EXYNOS4210_HOST, > > + EXYNOS4210_HSIC0, > > + EXYNOS4210_HSIC1, > > + EXYNOS4210_NUM_PHYS, > > +}; > > + > > +/* > > + * exynos4210_rate_to_clk() converts the supplied clock rate to the > > +value that > > + * can be written to the phy register. > > + */ > > +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) { > > + switch (rate) { > > + case 12 * MHZ: > > + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; > > + break; > > + case 24 * MHZ: > > + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; > > + break; > > + case 48 * MHZ: > > + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, > > +bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 offset; > > + u32 mask; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4210_DEVICE: > > + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; > > + mask = EXYNOS_4210_USB_ISOL_DEVICE; > > + break; > > + case EXYNOS4210_HOST: > > + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; > > + mask = EXYNOS_4210_USB_ISOL_HOST; > > + break; > > + default: > > + return; > > + }; > > + > > + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); } > > + > > +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance > > +*inst, bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 rstbits = 0; > > + u32 phypwr = 0; > > + u32 rst; > > + u32 pwr; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4210_DEVICE: > > + phypwr = EXYNOS_4210_UPHYPWR_PHY0; > > + rstbits = EXYNOS_4210_URSTCON_PHY0; > > + break; > > + case EXYNOS4210_HOST: > > + phypwr = EXYNOS_4210_UPHYPWR_PHY1; > > + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | > > + EXYNOS_4210_URSTCON_PHY1_P0 | > > + EXYNOS_4210_URSTCON_PHY1_P1P2 | > > + EXYNOS_4210_URSTCON_HOST_LINK_ALL | > > + EXYNOS_4210_URSTCON_HOST_LINK_P0; > > + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); > > + break; > > + case EXYNOS4210_HSIC0: > > + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; > > + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | > > + EXYNOS_4210_URSTCON_HOST_LINK_P1; > > + break; > > + case EXYNOS4210_HSIC1: > > + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; > > + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | > > + EXYNOS_4210_URSTCON_HOST_LINK_P2; > > + break; > > + }; > > + > > + if (on) { > > + writel(inst->clk_reg_val, drv->reg_phy + > EXYNOS_4210_UPHYCLK); > > + > > + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + pwr &= ~phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + > > + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); > > + rst |= rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); > > + udelay(10); > > + rst &= ~rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); > > + } else { > > + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + pwr |= phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + } > > +} > > + > > +static int exynos4210_power_on(struct samsung_usb2_phy_instance > > +*inst) { > > + /* Order of initialisation is important - first power then > isolation */ > > + exynos4210_phy_pwr(inst, 1); > > + exynos4210_isol(inst, 0); > > + > > + return 0; > > +} > > + > > +static int exynos4210_power_off(struct samsung_usb2_phy_instance > > +*inst) { > > + exynos4210_isol(inst, 1); > > + exynos4210_phy_pwr(inst, 0); > > + > > + return 0; > > +} > > + > > + > > +static const struct samsung_usb2_common_phy exynos4210_phys[] = { > > + { > > + .label = "device", > > + .id = EXYNOS4210_DEVICE, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "host", > > + .id = EXYNOS4210_HOST, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .id = EXYNOS4210_HSIC0, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .id = EXYNOS4210_HSIC1, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + {}, > > +}; > > + > > +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { > > + .num_phys = EXYNOS4210_NUM_PHYS, > > + .phys = exynos4210_phys, > > + .has_mode_switch = 0, > > +}; > > + > > diff --git a/drivers/phy/phy-exynos4x12-usb2.c > > b/drivers/phy/phy-exynos4x12-usb2.c > > new file mode 100644 > > index 0000000..ce39502 > > --- /dev/null > > +++ b/drivers/phy/phy-exynos4x12-usb2.c > > @@ -0,0 +1,323 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include "phy-samsung-usb2.h" > > + > > +/* Exynos USB PHY registers */ > > + > > +/* PHY power control */ > > +#define EXYNOS_4x12_UPHYPWR 0x0 > > + > > +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) > > +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) > > +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) > > +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) > > +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ > > + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ > > + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ > > + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) > > + > > +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) > > +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) > > +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) > > +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ > > + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ > > + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) > > + > > +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) > > +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) > > +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) > > +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ > > + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ > > + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) > > + > > +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) > > +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) > > +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) > > +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ > > + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ > > + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) > > + > > +/* PHY clock control */ > > +#define EXYNOS_4x12_UPHYCLK 0x4 > > + > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) > > + > > +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) > > +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) > > +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) > > + > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) > > + > > +/* PHY reset control */ > > +#define EXYNOS_4x12_UPHYRST 0x8 > > + > > +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) > > +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) > > +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) > > +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) > > +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) > > +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(5) > > +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(6) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(8) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(10) > > + > > +/* Isolation, configured in the power management unit */ > > +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 > > +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) > > +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 > > +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) > > +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c > > +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) > > + > > +/* Mode switching SUB Device <-> Host */ > > +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c > > +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 > > +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 > > +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 > > + > > +enum exynos4x12_phy_id { > > + EXYNOS4x12_DEVICE, > > + EXYNOS4x12_HOST, > > + EXYNOS4x12_HSIC0, > > + EXYNOS4x12_HSIC1, > > + EXYNOS4x12_NUM_PHYS, > > +}; > > + > > +/* > > + * exynos4x12_rate_to_clk() converts the supplied clock rate to the > > +value that > > + * can be written to the phy register. > > + */ > > +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) { > > + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ > > + > > + switch (rate) { > > + case 9600 * KHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; > > + break; > > + case 10 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; > > + break; > > + case 12 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; > > + break; > > + case 19200 * KHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; > > + break; > > + case 20 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; > > + break; > > + case 24 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; > > + break; > > + case 50 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, > > +bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 offset; > > + u32 mask; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4x12_DEVICE: > > + case EXYNOS4x12_HOST: > > + offset = EXYNOS_4x12_USB_ISOL_OFFSET; > > + mask = EXYNOS_4x12_USB_ISOL_OTG; > > + break; > > + case EXYNOS4x12_HSIC0: > > + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; > > + mask = EXYNOS_4x12_USB_ISOL_HSIC0; > > + break; > > + case EXYNOS4x12_HSIC1: > > + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; > > + mask = EXYNOS_4x12_USB_ISOL_HSIC1; > > + break; > > + default: > > + return; > > + }; > > + > > + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); } > > + > > +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance > > +*inst) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + writel(inst->clk_reg_val, drv->reg_phy + EXYNOS_4x12_UPHYCLK); } > > + > > +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance > > +*inst, bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 rstbits = 0; > > + u32 phypwr = 0; > > + u32 rst; > > + u32 pwr; > > + u32 mode = 0; > > + u32 switch_mode = 0; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4x12_DEVICE: > > + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; > > + rstbits = EXYNOS_4x12_URSTCON_PHY0; > > + mode = EXYNOS_4x12_MODE_SWITCH_DEVICE; > > + switch_mode = 1; > > + break; > > + case EXYNOS4x12_HOST: > > + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; > > + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY; > > + mode = EXYNOS_4x12_MODE_SWITCH_HOST; > > + switch_mode = 1; > > + break; > > + case EXYNOS4x12_HSIC0: > > + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; > > + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | > > + EXYNOS_4x12_URSTCON_HOST_LINK_P0 | > > + EXYNOS_4x12_URSTCON_HOST_PHY; > > + break; > > + case EXYNOS4x12_HSIC1: > > + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; > > + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | > > + EXYNOS_4x12_URSTCON_HOST_LINK_P1; > > + break; > > + }; > > + > > + if (on) { > > + if (switch_mode) > > + regmap_update_bits(drv->reg_sys, > > + EXYNOS_4x12_MODE_SWITCH_OFFSET, > > + EXYNOS_4x12_MODE_SWITCH_MASK, > > + mode); > > + > > + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + pwr &= ~phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + > > + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); > > + rst |= rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); > > + udelay(10); > > + rst &= ~rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); > > + } else { > > + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + pwr |= phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + } > > +} > > + > > +static int exynos4x12_power_on(struct samsung_usb2_phy_instance > > +*inst) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + > > + inst->enabled = 1; > > + exynos4x12_setup_clk(inst); > > + exynos4x12_phy_pwr(inst, 1); > > + exynos4x12_isol(inst, 0); > > + > > + /* Power on the device, as it is necessary for HSIC to work */ > > + if (inst->cfg->id == EXYNOS4x12_HSIC0) { > > + struct samsung_usb2_phy_instance *device = > > + &drv->instances[EXYNOS4x12_DEVICE]; > > + exynos4x12_phy_pwr(device, 1); > > + exynos4x12_isol(device, 0); > > + } > > + > > + return 0; > > +} > > + > > +static int exynos4x12_power_off(struct samsung_usb2_phy_instance > > +*inst) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + struct samsung_usb2_phy_instance *device = > > + &drv->instances[EXYNOS4x12_DEVICE]; > > + > > + inst->enabled = 0; > > + exynos4x12_isol(inst, 1); > > + exynos4x12_phy_pwr(inst, 0); > > + > > + if (inst->cfg->id == EXYNOS4x12_HSIC0 && !device->enabled) { > > + exynos4x12_isol(device, 1); > > + exynos4x12_phy_pwr(device, 0); > > + } > > + > > + return 0; > > +} > > + > > + > > +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { > > + { > > + .label = "device", > > + .id = EXYNOS4x12_DEVICE, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + { > > + .label = "host", > > + .id = EXYNOS4x12_HOST, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .id = EXYNOS4x12_HSIC0, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .id = EXYNOS4x12_HSIC1, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + {}, > > +}; > > + > > +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { > > + .num_phys = EXYNOS4x12_NUM_PHYS, > > + .phys = exynos4x12_phys, > > + .has_mode_switch = 1, > > +}; > > + > > diff --git a/drivers/phy/phy-samsung-usb2.c > > b/drivers/phy/phy-samsung-usb2.c new file mode 100644 index > > 0000000..c1b0fd5 > > --- /dev/null > > +++ b/drivers/phy/phy-samsung-usb2.c > > @@ -0,0 +1,227 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include "phy-samsung-usb2.h" > > + > > +static int samsung_usb2_phy_power_on(struct phy *phy) { > > + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + int ret; > > + > > + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", > > + inst->cfg->label); > > + ret = clk_prepare_enable(drv->clk); > > + if (ret) > > + goto err_main_clk; > > + ret = clk_prepare_enable(inst->clk); > > + if (ret) > > + goto err_instance_clk; > > + inst->rate = clk_get_rate(inst->clk); > > + if (inst->cfg->rate_to_clk) { > > + ret = inst->cfg->rate_to_clk(inst->rate, &inst- > >clk_reg_val); > > + if (ret) > > + goto err_get_rate; > > + } > > + if (inst->cfg->power_on) { > > + spin_lock(&drv->lock); > > + ret = inst->cfg->power_on(inst); > > + spin_unlock(&drv->lock); > > + } > > + > > + return 0; > > + > > +err_get_rate: > > + clk_disable_unprepare(inst->clk); > > +err_instance_clk: > > + clk_disable_unprepare(drv->clk); > > +err_main_clk: > > + return ret; > > +} > > + > > +static int samsung_usb2_phy_power_off(struct phy *phy) { > > + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + int ret = 0; > > + > > + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", > > + inst->cfg->label); > > + if (inst->cfg->power_off) { > > + spin_lock(&drv->lock); > > + ret = inst->cfg->power_off(inst); > > + spin_unlock(&drv->lock); > > + } > > + clk_disable_unprepare(inst->clk); > > + clk_disable_unprepare(drv->clk); > > + return ret; > > +} > > + > > +static struct phy_ops samsung_usb2_phy_ops = { > > + .power_on = samsung_usb2_phy_power_on, > > + .power_off = samsung_usb2_phy_power_off, > > + .owner = THIS_MODULE, > > +}; > > + > > +static struct phy *samsung_usb2_phy_xlate(struct device *dev, > > + struct of_phandle_args *args) > > +{ > > + struct samsung_usb2_phy_driver *drv; > > + > > + drv = dev_get_drvdata(dev); > > + if (!drv) > > + return ERR_PTR(-EINVAL); > > + > > + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) > > + return ERR_PTR(-ENODEV); > > + > > + return drv->instances[args->args[0]].phy; > > +} > > + > > +static const struct of_device_id samsung_usb2_phy_of_match[] = { > > +#ifdef CONFIG_PHY_EXYNOS4210_USB2 > > + { > > + .compatible = "samsung,exynos4210-usb2-phy", > > + .data = &exynos4210_usb2_phy_config, > > + }, > > +#endif > > +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 > > + { > > + .compatible = "samsung,exynos4x12-usb2-phy", > > + .data = &exynos4x12_usb2_phy_config, > > + }, > > +#endif > > + { }, > > +}; > > + > > +static int samsung_usb2_phy_probe(struct platform_device *pdev) { > > + const struct of_device_id *match; > > + const struct samsung_usb2_phy_config *cfg; > > + struct clk *clk; > > + struct device *dev = &pdev->dev; > > + struct phy_provider *phy_provider; > > + struct resource *mem; > > + struct samsung_usb2_phy_driver *drv; > > + int i; > > + > > + if (!pdev->dev.of_node) { > > + dev_err(dev, "This driver is required to be instantiated > from device tree\n"); > > + return -EINVAL; > > + } > > + > > + match = of_match_node(samsung_usb2_phy_of_match, pdev- > >dev.of_node); > > + if (!match) { > > + dev_err(dev, "of_match_node() failed\n"); > > + return -EINVAL; > > + } > > + cfg = match->data; > > + > > + drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + > > + cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), > > + GFP_KERNEL); > > + if (!drv) > > + return -ENOMEM; > > + > > + dev_set_drvdata(dev, drv); > > + spin_lock_init(&drv->lock); > > + > > + drv->cfg = cfg; > > + drv->dev = dev; > > + > > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + drv->reg_phy = devm_ioremap_resource(dev, mem); > > + if (IS_ERR(drv->reg_phy)) { > > + dev_err(dev, "Failed to map register memory (phy)\n"); > > + return PTR_ERR(drv->reg_phy); > > + } > > + > > + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, > > + "samsung,pmureg-phandle"); > > + if (IS_ERR(drv->reg_pmu)) { > > + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); > > + return PTR_ERR(drv->reg_pmu); > > + } > > + > > + if (drv->cfg->has_mode_switch) { > > + drv->reg_sys = syscon_regmap_lookup_by_phandle( > > + pdev->dev.of_node, "samsung,sysreg-phandle"); > > + if (IS_ERR(drv->reg_sys)) { > > + dev_err(dev, "Failed to map system registers (via > syscon)\n"); > > + return PTR_ERR(drv->reg_sys); > > + } > > + } > > + > > + drv->clk = devm_clk_get(dev, "phy"); > > + if (IS_ERR(drv->clk)) { > > + dev_err(dev, "Failed to get clock of phy controller\n"); > > + return PTR_ERR(drv->clk); > > + } > > + > > + for (i = 0; i < drv->cfg->num_phys; i++) { > > + char *label = drv->cfg->phys[i].label; > > + struct samsung_usb2_phy_instance *p = &drv->instances[i]; > > + > > + dev_dbg(dev, "Creating phy \"%s\"\n", label); > > + p->phy = devm_phy_create(dev, &samsung_usb2_phy_ops, NULL); > > + if (IS_ERR(p->phy)) { > > + dev_err(drv->dev, "Failed to create usb2_phy > \"%s\"\n", > > + label); > > + return PTR_ERR(p->phy); > > + } > > + > > + p->cfg = &drv->cfg->phys[i]; > > + p->drv = drv; > > + phy_set_bus_width(p->phy, 8); > > + phy_set_drvdata(p->phy, p); > > + > > + clk = devm_clk_get(dev, p->cfg->label); > > + if (IS_ERR(clk)) { > > + dev_err(dev, "Failed to get clock of \"%s\" phy\n", > > + p->cfg->label); > > + return PTR_ERR(clk); > > + } > > + p->clk = clk; > > + } > > + > > + phy_provider = devm_of_phy_provider_register(dev, > > + samsung_usb2_phy_xlate); > > + if (IS_ERR(phy_provider)) { > > + dev_err(drv->dev, "Failed to register phy provider\n"); > > + return PTR_ERR(phy_provider); > > + } > > + > > + return 0; > > +} > > + > > +static struct platform_driver samsung_usb2_phy_driver = { > > + .probe = samsung_usb2_phy_probe, > > + .driver = { > > + .of_match_table = samsung_usb2_phy_of_match, > > + .name = "samsung-usb2-phy", > > + .owner = THIS_MODULE, > > + } > > +}; > > + > > +module_platform_driver(samsung_usb2_phy_driver); > > +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); > > +MODULE_AUTHOR("Kamil Debski "); > > +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:samsung-usb2-phy"); > > + > > diff --git a/drivers/phy/phy-samsung-usb2.h > > b/drivers/phy/phy-samsung-usb2.h new file mode 100644 index > > 0000000..868dd33 > > --- /dev/null > > +++ b/drivers/phy/phy-samsung-usb2.h > > @@ -0,0 +1,67 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#ifndef _PHY_EXYNOS_USB2_H > > +#define _PHY_EXYNOS_USB2_H > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define KHZ 1000 > > +#define MHZ (KHZ * KHZ) > > + > > +struct samsung_usb2_phy_driver; > > +struct samsung_usb2_phy_instance; > > +struct samsung_usb2_phy_config; > > + > > +struct samsung_usb2_phy_instance { > > + const struct samsung_usb2_common_phy *cfg; > > + struct clk *clk; > > + struct phy *phy; > > + struct samsung_usb2_phy_driver *drv; > > + unsigned long rate; > > + u32 clk_reg_val; > > + bool enabled; > > +}; > > + > > +struct samsung_usb2_phy_driver { > > + const struct samsung_usb2_phy_config *cfg; > > + struct clk *clk; > > + struct device *dev; > > + void __iomem *reg_phy; > > + struct regmap *reg_pmu; > > + struct regmap *reg_sys; > > + spinlock_t lock; > > + struct samsung_usb2_phy_instance instances[0]; }; > > + > > +struct samsung_usb2_common_phy { > > + int (*rate_to_clk)(unsigned long, u32 *); > > + int (*power_on)(struct samsung_usb2_phy_instance *); > > + int (*power_off)(struct samsung_usb2_phy_instance *); > > + unsigned int id; > > + char *label; > > +}; > > + > > + > > +struct samsung_usb2_phy_config { > > + const struct samsung_usb2_common_phy *phys; > > + unsigned int num_phys; > > + bool has_mode_switch; > > +}; > > + > > +extern const struct samsung_usb2_phy_config > > +exynos4210_usb2_phy_config; extern const struct > > +samsung_usb2_phy_config exynos4x12_usb2_phy_config; #endif > > + > > From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kamil Debski Subject: RE: [PATCH v6 5/8] phy: Add new Exynos USB PHY driver Date: Mon, 03 Mar 2014 16:07:04 +0100 Message-ID: <16eb01cf36f2$3da91370$b8fb3a50$%debski@samsung.com> References: <1391016574-25237-1-git-send-email-k.debski@samsung.com> <1391016574-25237-6-git-send-email-k.debski@samsung.com> <53149155.4010209@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <53149155.4010209-l0cyMroinI0@public.gmane.org> Content-language: pl Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: 'Kishon Vijay Abraham I' , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, Tomasz Figa , Sylwester Nawrocki , Marek Szyprowski , gautam.vivek-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, mat.krawczuk-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, yulgon.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, p.paneri-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, av.tikhomirov-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, matt.porter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, tjakobi-o02PS0xoJP9W0yFyLvAVXMxlOr/tl8fh@public.gmane.org, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Kishon, > From: Kishon Vijay Abraham I [mailto:kishon-l0cyMroinI0@public.gmane.org] > Sent: Monday, March 03, 2014 3:28 PM > > Hi, > > On Wednesday 29 January 2014 10:59 PM, Kamil Debski wrote: > > Add a new driver for the Exynos USB PHY. The new driver uses the > > generic PHY framework. The driver includes support for the Exynos > 4x10 > > and 4x12 SoC families. > > Can the PHY part of this series be merged independently of the > controller part? I see no problems with merging the PHY part independently. However, I would like to post an updated version of these patches. I am working on them now and should send them tomorrow. Best wishes, -- Kamil Debski Samsung R&D Institute Poland > > > > Signed-off-by: Kamil Debski > > --- > > .../devicetree/bindings/phy/samsung-phy.txt | 55 ++++ > > Documentation/phy/samsung-usb2.txt | 135 ++++++++ > > drivers/phy/Kconfig | 29 ++ > > drivers/phy/Makefile | 3 + > > drivers/phy/phy-exynos4210-usb2.c | 257 > ++++++++++++++++ > > drivers/phy/phy-exynos4x12-usb2.c | 323 > ++++++++++++++++++++ > > drivers/phy/phy-samsung-usb2.c | 227 > ++++++++++++++ > > drivers/phy/phy-samsung-usb2.h | 67 ++++ > > 8 files changed, 1096 insertions(+) > > create mode 100644 Documentation/phy/samsung-usb2.txt > > create mode 100644 drivers/phy/phy-exynos4210-usb2.c > > create mode 100644 drivers/phy/phy-exynos4x12-usb2.c > > create mode 100644 drivers/phy/phy-samsung-usb2.c > > create mode 100644 drivers/phy/phy-samsung-usb2.h > > > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt > > b/Documentation/devicetree/bindings/phy/samsung-phy.txt > > index c0fccaa..6668c41 100644 > > --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt > > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > > @@ -20,3 +20,58 @@ Required properties: > > - compatible : should be "samsung,exynos5250-dp-video-phy"; > > - reg : offset and length of the Display Port PHY register set; > > - #phy-cells : from the generic PHY bindings, must be 0; > > + > > +Samsung S5P/EXYNOS SoC series USB PHY > > +------------------------------------------------- > > + > > +Required properties: > > +- compatible : should be one of the listed compatibles: > > + - "samsung,exynos4210-usb2-phy" > > + - "samsung,exynos4x12-usb2-phy" > > +- reg : a list of registers used by phy driver > > + - first and obligatory is the location of phy modules registers > > +- samsung,sysreg-phandle - handle to syscon used to control the > > +system registers > > +- samsung,pmureg-phandle - handle to syscon used to control PMU > > +registers > > +- #phy-cells : from the generic phy bindings, must be 1; > > +- clocks and clock-names: > > + - the "phy" clocks is required by the phy module > > + - next for each of the phys a clock has to be assigned, this > clock > > + will be used to determine clocking frequency for the phys > > + (the labels are specified in the paragraph below) > > + > > +The first phandle argument in the PHY specifier identifies the PHY, > > +its meaning is compatible dependent. For the currently supported > SoCs > > +(Exynos 4210 and Exynos 4212) it is as follows: > > + 0 - USB device ("device"), > > + 1 - USB host ("host"), > > + 2 - HSIC0 ("hsic0"), > > + 3 - HSIC1 ("hsic1"), > > + > > +Exynos 4210 and Exynos 4212 use mode switching and require that mode > > +switch register is supplied. > > + > > +Example: > > + > > +For Exynos 4412 (compatible with Exynos 4212): > > + > > +usbphy: phy@125b0000 { > > + compatible = "samsung,exynos4212-usb2-phy"; > > + reg = <0x125b0000 0x100 0x10020704 0x0c 0x1001021c 0x4>; > > + clocks = <&clock 305>, <&clock 2>, <&clock 2>, <&clock 2>, > > + <&clock 2>; > > + clock-names = "phy", "device", "host", "hsic0", "hsic1"; > > + status = "okay"; > > + #phy-cells = <1>; > > + samsung,sysreg-phandle = <&sys_reg>; > > + samsung,pmureg-phandle = <&pmu_reg>; }; > > + > > +Then the PHY can be used in other nodes such as: > > + > > +phy-consumer@12340000 { > > + phys = <&usbphy 2>; > > + phy-names = "phy"; > > +}; > > + > > +Refer to DT bindings documentation of particular PHY consumer > devices > > +for more information about required PHYs and the way of > specification. > > diff --git a/Documentation/phy/samsung-usb2.txt > > b/Documentation/phy/samsung-usb2.txt > > new file mode 100644 > > index 0000000..9f5826e > > --- /dev/null > > +++ b/Documentation/phy/samsung-usb2.txt > > @@ -0,0 +1,135 @@ > > +.------------------------------------------------------------------- > - > > +----------+ > > +| Samsung USB 2.0 PHY adaptation layer > | > > ++------------------------------------------------------------------- > ----------+' > > + > > +| 1. Description > > ++---------------- > > + > > +The architecture of the USB 2.0 PHY module in Samsung SoCs is > similar > > +among many SoCs. In spite of the similarities it proved difficult to > > +create a one driver that would fit all these PHY controllers. Often > > +the differences were minor and were found in particular bits of the > > +registers of the PHY. In some rare cases the order of register > writes > > +or the PHY powering up process had to be altered. This adaptation > > +layer is a compromise between having separate drivers and having a > > +single driver with added support for many special cases. > > + > > +| 2. Files description > > ++---------------------- > > + > > +- phy-samsung-usb2.c > > + This is the main file of the adaptation layer. This file contains > > + the probe function and provides two callbacks to the Generic PHY > > + Framework. This two callbacks are used to power on and power off > the > > + phy. They carry out the common work that has to be done on all > version > > + of the PHY module. Depending on which SoC was chosen they execute > SoC > > + specific callbacks. The specific SoC version is selected by > choosing > > + the appropriate compatible string. In addition, this file > contains > > + struct of_device_id definitions for particular SoCs. > > + > > +- phy-samsung-usb2.h > > + This is the include file. It declares the structures used by this > > + driver. In addition it should contain extern declarations for > > + structures that describe particular SoCs. > > + > > +| 3. Supporting SoCs > > ++-------------------- > > + > > +To support a new SoC a new file should be added to the drivers/phy > > +directory. Each SoC's configuration is stored in an instance of the > > +struct samsung_usb2_phy_config. > > + > > +struct samsung_usb2_phy_config { > > + const struct samsung_usb2_common_phy *phys; > > + unsigned int num_phys; > > + bool has_mode_switch; > > +}; > > + > > +The num_phys is the number of phys handled by the driver. *phys is > an > > +array that contains the configuration for each phy. The > > +has_mode_switch property is a boolean flag that determines whether > > +the SoC has USB host and device on a single pair of pins. If so, a > > +special register has to be modified to change the internal routing > of > > +these pins between a USB device or host module. > > + > > +For example the configuration for Exynos 4210 is following: > > + > > +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { > > + .num_phys = EXYNOS4210_NUM_PHYS, > > + .phys = exynos4210_phys, > > +} > > + > > +The exynos4210_phys configuration array is as follows: > > + > > +static const struct samsung_usb2_common_phy exynos4210_phys[] = { > > + { > > + .label = "device", > > + .id = EXYNOS4210_DEVICE, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "host", > > + .id = EXYNOS4210_HOST, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .id = EXYNOS4210_HSIC0, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .id = EXYNOS4210_HSIC1, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + {}, > > +}; > > + > > +- int (*rate_to_clk)(unsigned long, u32 *) > > + The rate_to_clk callback is to convert the rate of the clock > > + used to clock the module to the value that should be written to > > + the registers of the PHY module. > > +- int (*power_on)(struct samsung_usb2_phy_instance *); > > +- int (*power_off)(struct samsung_usb2_phy_instance *); > > + These two callbacks are used to power on and power off the phy > > + by modifying appropriate registers. > > + > > +Final change to the driver is adding appropriate compatible value to > > +the phy-samsung-usb2.c file. In case of Exynos 4210 the following > > +lines were added to the struct of_device_id > samsung_usb2_phy_of_match[] array: > > + > > +#ifdef CONFIG_PHY_EXYNOS4210_USB2 > > + { > > + .compatible = "samsung,exynos4210-usb2-phy", > > + .data = &exynos4210_usb2_phy_config, > > + }, > > +#endif > > + > > +To add further flexibility to the driver the Kconfig file enables to > > +include support for selected SoCs in the compiled driver. The > Kconfig > > +entry for Exynos 4210 is following: > > + > > +config PHY_EXYNOS4210_USB2 > > + bool "Support for Exynos 4210" > > + depends on PHY_SAMSUNG_USB2 > > + depends on CPU_EXYNOS4210 > > + help > > + Enable USB PHY support for Exynos 4210. This option requires > that > > + Samsung USB 2.0 PHY driver is enabled and means that support > for this > > + particular SoC is compiled in the driver. In case of Exynos > 4210 four > > + phys are available - device, host, HSCI0 and HSCI1. > > + > > +The newly created file that supports the new SoC has to be also > added > > +to the Makefile. In case of Exynos 4210 the added line is following: > > + > > +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > > + > > +After completing these steps the support for the new SoC should be > ready. > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index > > b901c47..3691d24 100644 > > --- a/drivers/phy/Kconfig > > +++ b/drivers/phy/Kconfig > > @@ -63,4 +63,33 @@ config BCM_KONA_USB2_PHY > > help > > Enable this to support the Broadcom Kona USB 2.0 PHY. > > > > +config PHY_SAMSUNG_USB2 > > + tristate "Samsung USB 2.0 PHY driver" > > + select GENERIC_PHY > > + select MFD_SYSCON > > + help > > + Enable this to support the Samsung USB 2.0 PHY driver for > Samsung > > + SoCs. This driver provides the interface for USB 2.0 PHY. > Support for > > + particular SoCs has to be enabled in addition to this driver. > Number > > + and type of supported phys depends on the SoC. > > + > > +config PHY_EXYNOS4210_USB2 > > + bool "Support for Exynos 4210" > > + depends on PHY_SAMSUNG_USB2 > > + depends on CPU_EXYNOS4210 > > + help > > + Enable USB PHY support for Exynos 4210. This option requires > that > > + Samsung USB 2.0 PHY driver is enabled and means that support > for this > > + particular SoC is compiled in the driver. In case of Exynos > 4210 four > > + phys are available - device, host, HSIC0 and HSIC1. > > + > > +config PHY_EXYNOS4X12_USB2 > > + bool "Support for Exynos 4x12" > > + depends on PHY_SAMSUNG_USB2 > > + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) > > + help > > + Enable USB PHY support for Exynos 4x12. This option requires > that > > + Samsung USB 2.0 PHY driver is enabled and means that support > for this > > + particular SoC is compiled in the driver. In case of Exynos > 4x12 four > > + phys are available - device, host, HSIC0 and HSIC1. > > endmenu > > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index > > b57c253..69d0b3f2 100644 > > --- a/drivers/phy/Makefile > > +++ b/drivers/phy/Makefile > > @@ -9,3 +9,6 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy- > exynos-mipi-video.o > > obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > > obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > > obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > > +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o > > +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > > +obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > > diff --git a/drivers/phy/phy-exynos4210-usb2.c > > b/drivers/phy/phy-exynos4210-usb2.c > > new file mode 100644 > > index 0000000..8f86abf > > --- /dev/null > > +++ b/drivers/phy/phy-exynos4210-usb2.c > > @@ -0,0 +1,257 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include "phy-samsung-usb2.h" > > + > > +/* Exynos USB PHY registers */ > > + > > +/* PHY power control */ > > +#define EXYNOS_4210_UPHYPWR 0x0 > > + > > +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) > > +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) > > +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) > > +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) > > +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ > > + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ > > + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ > > + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) > > + > > +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) > > +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) > > +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) > > +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ > > + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ > > + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) > > + > > +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) > > +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) > > +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ > > + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) > > + > > +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) > > +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) > > +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ > > + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ > > + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) > > + > > +/* PHY clock control */ > > +#define EXYNOS_4210_UPHYCLK 0x4 > > + > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) > > +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) > > + > > +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) > > +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) > > +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) > > + > > +/* PHY reset control */ > > +#define EXYNOS_4210_UPHYRST 0x8 > > + > > +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) > > +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) > > +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) > > +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) > > +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) > > +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) > > +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) > > + > > +/* Isolation, configured in the power management unit */ > > +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 > > +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) > > +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 > > +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) > > + > > +/* USBYPHY1 Floating prevention */ > > +#define EXYNOS_4210_UPHY1CON 0x34 > > +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 > > + > > +/* Mode switching SUB Device <-> Host */ > > +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c > > +#define EXYNOS_4210_MODE_SWITCH_MASK 1 > > +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 > > +#define EXYNOS_4210_MODE_SWITCH_HOST 1 > > + > > +enum exynos4210_phy_id { > > + EXYNOS4210_DEVICE, > > + EXYNOS4210_HOST, > > + EXYNOS4210_HSIC0, > > + EXYNOS4210_HSIC1, > > + EXYNOS4210_NUM_PHYS, > > +}; > > + > > +/* > > + * exynos4210_rate_to_clk() converts the supplied clock rate to the > > +value that > > + * can be written to the phy register. > > + */ > > +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) { > > + switch (rate) { > > + case 12 * MHZ: > > + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; > > + break; > > + case 24 * MHZ: > > + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; > > + break; > > + case 48 * MHZ: > > + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, > > +bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 offset; > > + u32 mask; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4210_DEVICE: > > + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; > > + mask = EXYNOS_4210_USB_ISOL_DEVICE; > > + break; > > + case EXYNOS4210_HOST: > > + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; > > + mask = EXYNOS_4210_USB_ISOL_HOST; > > + break; > > + default: > > + return; > > + }; > > + > > + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); } > > + > > +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance > > +*inst, bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 rstbits = 0; > > + u32 phypwr = 0; > > + u32 rst; > > + u32 pwr; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4210_DEVICE: > > + phypwr = EXYNOS_4210_UPHYPWR_PHY0; > > + rstbits = EXYNOS_4210_URSTCON_PHY0; > > + break; > > + case EXYNOS4210_HOST: > > + phypwr = EXYNOS_4210_UPHYPWR_PHY1; > > + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | > > + EXYNOS_4210_URSTCON_PHY1_P0 | > > + EXYNOS_4210_URSTCON_PHY1_P1P2 | > > + EXYNOS_4210_URSTCON_HOST_LINK_ALL | > > + EXYNOS_4210_URSTCON_HOST_LINK_P0; > > + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); > > + break; > > + case EXYNOS4210_HSIC0: > > + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; > > + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | > > + EXYNOS_4210_URSTCON_HOST_LINK_P1; > > + break; > > + case EXYNOS4210_HSIC1: > > + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; > > + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | > > + EXYNOS_4210_URSTCON_HOST_LINK_P2; > > + break; > > + }; > > + > > + if (on) { > > + writel(inst->clk_reg_val, drv->reg_phy + > EXYNOS_4210_UPHYCLK); > > + > > + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + pwr &= ~phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + > > + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); > > + rst |= rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); > > + udelay(10); > > + rst &= ~rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); > > + } else { > > + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + pwr |= phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); > > + } > > +} > > + > > +static int exynos4210_power_on(struct samsung_usb2_phy_instance > > +*inst) { > > + /* Order of initialisation is important - first power then > isolation */ > > + exynos4210_phy_pwr(inst, 1); > > + exynos4210_isol(inst, 0); > > + > > + return 0; > > +} > > + > > +static int exynos4210_power_off(struct samsung_usb2_phy_instance > > +*inst) { > > + exynos4210_isol(inst, 1); > > + exynos4210_phy_pwr(inst, 0); > > + > > + return 0; > > +} > > + > > + > > +static const struct samsung_usb2_common_phy exynos4210_phys[] = { > > + { > > + .label = "device", > > + .id = EXYNOS4210_DEVICE, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "host", > > + .id = EXYNOS4210_HOST, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .id = EXYNOS4210_HSIC0, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .id = EXYNOS4210_HSIC1, > > + .rate_to_clk = exynos4210_rate_to_clk, > > + .power_on = exynos4210_power_on, > > + .power_off = exynos4210_power_off, > > + }, > > + {}, > > +}; > > + > > +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { > > + .num_phys = EXYNOS4210_NUM_PHYS, > > + .phys = exynos4210_phys, > > + .has_mode_switch = 0, > > +}; > > + > > diff --git a/drivers/phy/phy-exynos4x12-usb2.c > > b/drivers/phy/phy-exynos4x12-usb2.c > > new file mode 100644 > > index 0000000..ce39502 > > --- /dev/null > > +++ b/drivers/phy/phy-exynos4x12-usb2.c > > @@ -0,0 +1,323 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include "phy-samsung-usb2.h" > > + > > +/* Exynos USB PHY registers */ > > + > > +/* PHY power control */ > > +#define EXYNOS_4x12_UPHYPWR 0x0 > > + > > +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) > > +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) > > +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) > > +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) > > +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ > > + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ > > + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ > > + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) > > + > > +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) > > +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) > > +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) > > +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ > > + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ > > + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) > > + > > +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) > > +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) > > +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) > > +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ > > + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ > > + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) > > + > > +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) > > +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) > > +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) > > +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ > > + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ > > + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ > > + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) > > + > > +/* PHY clock control */ > > +#define EXYNOS_4x12_UPHYCLK 0x4 > > + > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) > > +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) > > + > > +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) > > +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) > > +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) > > + > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) > > +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) > > + > > +/* PHY reset control */ > > +#define EXYNOS_4x12_UPHYRST 0x8 > > + > > +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) > > +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) > > +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) > > +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) > > +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) > > +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(5) > > +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(6) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(8) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) > > +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(10) > > + > > +/* Isolation, configured in the power management unit */ > > +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 > > +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) > > +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 > > +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) > > +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c > > +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) > > + > > +/* Mode switching SUB Device <-> Host */ > > +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c > > +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 > > +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 > > +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 > > + > > +enum exynos4x12_phy_id { > > + EXYNOS4x12_DEVICE, > > + EXYNOS4x12_HOST, > > + EXYNOS4x12_HSIC0, > > + EXYNOS4x12_HSIC1, > > + EXYNOS4x12_NUM_PHYS, > > +}; > > + > > +/* > > + * exynos4x12_rate_to_clk() converts the supplied clock rate to the > > +value that > > + * can be written to the phy register. > > + */ > > +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) { > > + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ > > + > > + switch (rate) { > > + case 9600 * KHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; > > + break; > > + case 10 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; > > + break; > > + case 12 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; > > + break; > > + case 19200 * KHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; > > + break; > > + case 20 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; > > + break; > > + case 24 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; > > + break; > > + case 50 * MHZ: > > + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, > > +bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 offset; > > + u32 mask; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4x12_DEVICE: > > + case EXYNOS4x12_HOST: > > + offset = EXYNOS_4x12_USB_ISOL_OFFSET; > > + mask = EXYNOS_4x12_USB_ISOL_OTG; > > + break; > > + case EXYNOS4x12_HSIC0: > > + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; > > + mask = EXYNOS_4x12_USB_ISOL_HSIC0; > > + break; > > + case EXYNOS4x12_HSIC1: > > + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; > > + mask = EXYNOS_4x12_USB_ISOL_HSIC1; > > + break; > > + default: > > + return; > > + }; > > + > > + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); } > > + > > +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance > > +*inst) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + writel(inst->clk_reg_val, drv->reg_phy + EXYNOS_4x12_UPHYCLK); } > > + > > +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance > > +*inst, bool on) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + u32 rstbits = 0; > > + u32 phypwr = 0; > > + u32 rst; > > + u32 pwr; > > + u32 mode = 0; > > + u32 switch_mode = 0; > > + > > + switch (inst->cfg->id) { > > + case EXYNOS4x12_DEVICE: > > + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; > > + rstbits = EXYNOS_4x12_URSTCON_PHY0; > > + mode = EXYNOS_4x12_MODE_SWITCH_DEVICE; > > + switch_mode = 1; > > + break; > > + case EXYNOS4x12_HOST: > > + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; > > + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY; > > + mode = EXYNOS_4x12_MODE_SWITCH_HOST; > > + switch_mode = 1; > > + break; > > + case EXYNOS4x12_HSIC0: > > + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; > > + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | > > + EXYNOS_4x12_URSTCON_HOST_LINK_P0 | > > + EXYNOS_4x12_URSTCON_HOST_PHY; > > + break; > > + case EXYNOS4x12_HSIC1: > > + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; > > + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | > > + EXYNOS_4x12_URSTCON_HOST_LINK_P1; > > + break; > > + }; > > + > > + if (on) { > > + if (switch_mode) > > + regmap_update_bits(drv->reg_sys, > > + EXYNOS_4x12_MODE_SWITCH_OFFSET, > > + EXYNOS_4x12_MODE_SWITCH_MASK, > > + mode); > > + > > + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + pwr &= ~phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + > > + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); > > + rst |= rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); > > + udelay(10); > > + rst &= ~rstbits; > > + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); > > + } else { > > + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + pwr |= phypwr; > > + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); > > + } > > +} > > + > > +static int exynos4x12_power_on(struct samsung_usb2_phy_instance > > +*inst) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + > > + inst->enabled = 1; > > + exynos4x12_setup_clk(inst); > > + exynos4x12_phy_pwr(inst, 1); > > + exynos4x12_isol(inst, 0); > > + > > + /* Power on the device, as it is necessary for HSIC to work */ > > + if (inst->cfg->id == EXYNOS4x12_HSIC0) { > > + struct samsung_usb2_phy_instance *device = > > + &drv->instances[EXYNOS4x12_DEVICE]; > > + exynos4x12_phy_pwr(device, 1); > > + exynos4x12_isol(device, 0); > > + } > > + > > + return 0; > > +} > > + > > +static int exynos4x12_power_off(struct samsung_usb2_phy_instance > > +*inst) { > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + struct samsung_usb2_phy_instance *device = > > + &drv->instances[EXYNOS4x12_DEVICE]; > > + > > + inst->enabled = 0; > > + exynos4x12_isol(inst, 1); > > + exynos4x12_phy_pwr(inst, 0); > > + > > + if (inst->cfg->id == EXYNOS4x12_HSIC0 && !device->enabled) { > > + exynos4x12_isol(device, 1); > > + exynos4x12_phy_pwr(device, 0); > > + } > > + > > + return 0; > > +} > > + > > + > > +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { > > + { > > + .label = "device", > > + .id = EXYNOS4x12_DEVICE, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + { > > + .label = "host", > > + .id = EXYNOS4x12_HOST, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + { > > + .label = "hsic0", > > + .id = EXYNOS4x12_HSIC0, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + { > > + .label = "hsic1", > > + .id = EXYNOS4x12_HSIC1, > > + .rate_to_clk = exynos4x12_rate_to_clk, > > + .power_on = exynos4x12_power_on, > > + .power_off = exynos4x12_power_off, > > + }, > > + {}, > > +}; > > + > > +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { > > + .num_phys = EXYNOS4x12_NUM_PHYS, > > + .phys = exynos4x12_phys, > > + .has_mode_switch = 1, > > +}; > > + > > diff --git a/drivers/phy/phy-samsung-usb2.c > > b/drivers/phy/phy-samsung-usb2.c new file mode 100644 index > > 0000000..c1b0fd5 > > --- /dev/null > > +++ b/drivers/phy/phy-samsung-usb2.c > > @@ -0,0 +1,227 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include "phy-samsung-usb2.h" > > + > > +static int samsung_usb2_phy_power_on(struct phy *phy) { > > + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + int ret; > > + > > + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", > > + inst->cfg->label); > > + ret = clk_prepare_enable(drv->clk); > > + if (ret) > > + goto err_main_clk; > > + ret = clk_prepare_enable(inst->clk); > > + if (ret) > > + goto err_instance_clk; > > + inst->rate = clk_get_rate(inst->clk); > > + if (inst->cfg->rate_to_clk) { > > + ret = inst->cfg->rate_to_clk(inst->rate, &inst- > >clk_reg_val); > > + if (ret) > > + goto err_get_rate; > > + } > > + if (inst->cfg->power_on) { > > + spin_lock(&drv->lock); > > + ret = inst->cfg->power_on(inst); > > + spin_unlock(&drv->lock); > > + } > > + > > + return 0; > > + > > +err_get_rate: > > + clk_disable_unprepare(inst->clk); > > +err_instance_clk: > > + clk_disable_unprepare(drv->clk); > > +err_main_clk: > > + return ret; > > +} > > + > > +static int samsung_usb2_phy_power_off(struct phy *phy) { > > + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); > > + struct samsung_usb2_phy_driver *drv = inst->drv; > > + int ret = 0; > > + > > + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", > > + inst->cfg->label); > > + if (inst->cfg->power_off) { > > + spin_lock(&drv->lock); > > + ret = inst->cfg->power_off(inst); > > + spin_unlock(&drv->lock); > > + } > > + clk_disable_unprepare(inst->clk); > > + clk_disable_unprepare(drv->clk); > > + return ret; > > +} > > + > > +static struct phy_ops samsung_usb2_phy_ops = { > > + .power_on = samsung_usb2_phy_power_on, > > + .power_off = samsung_usb2_phy_power_off, > > + .owner = THIS_MODULE, > > +}; > > + > > +static struct phy *samsung_usb2_phy_xlate(struct device *dev, > > + struct of_phandle_args *args) > > +{ > > + struct samsung_usb2_phy_driver *drv; > > + > > + drv = dev_get_drvdata(dev); > > + if (!drv) > > + return ERR_PTR(-EINVAL); > > + > > + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) > > + return ERR_PTR(-ENODEV); > > + > > + return drv->instances[args->args[0]].phy; > > +} > > + > > +static const struct of_device_id samsung_usb2_phy_of_match[] = { > > +#ifdef CONFIG_PHY_EXYNOS4210_USB2 > > + { > > + .compatible = "samsung,exynos4210-usb2-phy", > > + .data = &exynos4210_usb2_phy_config, > > + }, > > +#endif > > +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 > > + { > > + .compatible = "samsung,exynos4x12-usb2-phy", > > + .data = &exynos4x12_usb2_phy_config, > > + }, > > +#endif > > + { }, > > +}; > > + > > +static int samsung_usb2_phy_probe(struct platform_device *pdev) { > > + const struct of_device_id *match; > > + const struct samsung_usb2_phy_config *cfg; > > + struct clk *clk; > > + struct device *dev = &pdev->dev; > > + struct phy_provider *phy_provider; > > + struct resource *mem; > > + struct samsung_usb2_phy_driver *drv; > > + int i; > > + > > + if (!pdev->dev.of_node) { > > + dev_err(dev, "This driver is required to be instantiated > from device tree\n"); > > + return -EINVAL; > > + } > > + > > + match = of_match_node(samsung_usb2_phy_of_match, pdev- > >dev.of_node); > > + if (!match) { > > + dev_err(dev, "of_match_node() failed\n"); > > + return -EINVAL; > > + } > > + cfg = match->data; > > + > > + drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + > > + cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), > > + GFP_KERNEL); > > + if (!drv) > > + return -ENOMEM; > > + > > + dev_set_drvdata(dev, drv); > > + spin_lock_init(&drv->lock); > > + > > + drv->cfg = cfg; > > + drv->dev = dev; > > + > > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + drv->reg_phy = devm_ioremap_resource(dev, mem); > > + if (IS_ERR(drv->reg_phy)) { > > + dev_err(dev, "Failed to map register memory (phy)\n"); > > + return PTR_ERR(drv->reg_phy); > > + } > > + > > + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, > > + "samsung,pmureg-phandle"); > > + if (IS_ERR(drv->reg_pmu)) { > > + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); > > + return PTR_ERR(drv->reg_pmu); > > + } > > + > > + if (drv->cfg->has_mode_switch) { > > + drv->reg_sys = syscon_regmap_lookup_by_phandle( > > + pdev->dev.of_node, "samsung,sysreg-phandle"); > > + if (IS_ERR(drv->reg_sys)) { > > + dev_err(dev, "Failed to map system registers (via > syscon)\n"); > > + return PTR_ERR(drv->reg_sys); > > + } > > + } > > + > > + drv->clk = devm_clk_get(dev, "phy"); > > + if (IS_ERR(drv->clk)) { > > + dev_err(dev, "Failed to get clock of phy controller\n"); > > + return PTR_ERR(drv->clk); > > + } > > + > > + for (i = 0; i < drv->cfg->num_phys; i++) { > > + char *label = drv->cfg->phys[i].label; > > + struct samsung_usb2_phy_instance *p = &drv->instances[i]; > > + > > + dev_dbg(dev, "Creating phy \"%s\"\n", label); > > + p->phy = devm_phy_create(dev, &samsung_usb2_phy_ops, NULL); > > + if (IS_ERR(p->phy)) { > > + dev_err(drv->dev, "Failed to create usb2_phy > \"%s\"\n", > > + label); > > + return PTR_ERR(p->phy); > > + } > > + > > + p->cfg = &drv->cfg->phys[i]; > > + p->drv = drv; > > + phy_set_bus_width(p->phy, 8); > > + phy_set_drvdata(p->phy, p); > > + > > + clk = devm_clk_get(dev, p->cfg->label); > > + if (IS_ERR(clk)) { > > + dev_err(dev, "Failed to get clock of \"%s\" phy\n", > > + p->cfg->label); > > + return PTR_ERR(clk); > > + } > > + p->clk = clk; > > + } > > + > > + phy_provider = devm_of_phy_provider_register(dev, > > + samsung_usb2_phy_xlate); > > + if (IS_ERR(phy_provider)) { > > + dev_err(drv->dev, "Failed to register phy provider\n"); > > + return PTR_ERR(phy_provider); > > + } > > + > > + return 0; > > +} > > + > > +static struct platform_driver samsung_usb2_phy_driver = { > > + .probe = samsung_usb2_phy_probe, > > + .driver = { > > + .of_match_table = samsung_usb2_phy_of_match, > > + .name = "samsung-usb2-phy", > > + .owner = THIS_MODULE, > > + } > > +}; > > + > > +module_platform_driver(samsung_usb2_phy_driver); > > +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); > > +MODULE_AUTHOR("Kamil Debski "); > > +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:samsung-usb2-phy"); > > + > > diff --git a/drivers/phy/phy-samsung-usb2.h > > b/drivers/phy/phy-samsung-usb2.h new file mode 100644 index > > 0000000..868dd33 > > --- /dev/null > > +++ b/drivers/phy/phy-samsung-usb2.h > > @@ -0,0 +1,67 @@ > > +/* > > + * Samsung SoC USB 1.1/2.0 PHY driver > > + * > > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > > + * Author: Kamil Debski > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#ifndef _PHY_EXYNOS_USB2_H > > +#define _PHY_EXYNOS_USB2_H > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define KHZ 1000 > > +#define MHZ (KHZ * KHZ) > > + > > +struct samsung_usb2_phy_driver; > > +struct samsung_usb2_phy_instance; > > +struct samsung_usb2_phy_config; > > + > > +struct samsung_usb2_phy_instance { > > + const struct samsung_usb2_common_phy *cfg; > > + struct clk *clk; > > + struct phy *phy; > > + struct samsung_usb2_phy_driver *drv; > > + unsigned long rate; > > + u32 clk_reg_val; > > + bool enabled; > > +}; > > + > > +struct samsung_usb2_phy_driver { > > + const struct samsung_usb2_phy_config *cfg; > > + struct clk *clk; > > + struct device *dev; > > + void __iomem *reg_phy; > > + struct regmap *reg_pmu; > > + struct regmap *reg_sys; > > + spinlock_t lock; > > + struct samsung_usb2_phy_instance instances[0]; }; > > + > > +struct samsung_usb2_common_phy { > > + int (*rate_to_clk)(unsigned long, u32 *); > > + int (*power_on)(struct samsung_usb2_phy_instance *); > > + int (*power_off)(struct samsung_usb2_phy_instance *); > > + unsigned int id; > > + char *label; > > +}; > > + > > + > > +struct samsung_usb2_phy_config { > > + const struct samsung_usb2_common_phy *phys; > > + unsigned int num_phys; > > + bool has_mode_switch; > > +}; > > + > > +extern const struct samsung_usb2_phy_config > > +exynos4210_usb2_phy_config; extern const struct > > +samsung_usb2_phy_config exynos4x12_usb2_phy_config; #endif > > + > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html