Jason, > -----Original Message----- > From: Jason Cooper [mailto:jason@lakedaemon.net] > Sent: 201379 20:49 > To: Neil Zhang > Cc: grant.likely@linaro.org; haojian.zhuang@gmail.com; arnd@arndb.de; > devicetree-discuss@lists.ozlabs.org; linux-kernel@vger.kernel.org; > linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell' > > Neil, > > On Tue, Jul 09, 2013 at 02:42:44PM +0800, Neil Zhang wrote: > > The documented vendor prefix for Marvell is 'marvell', not 'mrvl', so > > let's change it. > > > > Signed-off-by: Neil Zhang > > --- > > .../devicetree/bindings/arm/mrvl/intc.txt | 16 +++--- > > .../devicetree/bindings/arm/mrvl/mrvl.txt | 6 +- > > .../devicetree/bindings/arm/mrvl/timer.txt | 4 +- > > Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 14 +++--- > > .../devicetree/bindings/mmc/sdhci-pxa.txt | 8 ++-- > > .../devicetree/bindings/rtc/sa1100-rtc.txt | 4 +- > > .../devicetree/bindings/serial/mrvl-serial.txt | 2 +- > > arch/arm/boot/dts/mmp2-brownstone.dts | 2 +- > > arch/arm/boot/dts/mmp2.dtsi | 56 > ++++++++++---------- > > arch/arm/boot/dts/pxa168-aspenite.dts | 2 +- > > arch/arm/boot/dts/pxa168.dtsi | 24 > ++++---- > > arch/arm/boot/dts/pxa2xx.dtsi | 16 +++--- > > arch/arm/boot/dts/pxa3xx.dtsi | 2 +- > > arch/arm/boot/dts/pxa910-dkb.dts | 2 +- > > arch/arm/boot/dts/pxa910.dtsi | 27 > +++++----- > > arch/arm/mach-mmp/irq.c | 16 > +++--- > > arch/arm/mach-mmp/mmp-dt.c | 28 > +++++----- > > arch/arm/mach-mmp/mmp2-dt.c | 16 > +++--- > > arch/arm/mach-mmp/time.c | 2 +- > > arch/arm/mach-pxa/pxa-dt.c | 14 > +++--- > > drivers/i2c/busses/i2c-pxa.c | 10 ++-- > > drivers/mmc/host/sdhci-pxav2.c | 4 +- > > drivers/mmc/host/sdhci-pxav3.c | 4 +- > > drivers/rtc/rtc-sa1100.c | 4 +- > > drivers/tty/serial/pxa.c | 4 +- > > 25 files changed, 144 insertions(+), 143 deletions(-) > > I agree with the need to change, however, this has been in the binding > documentation since v3.5. I wish we had caught this when we decided > against using stock ticker symbols (not all stock markets use alphabetical > abbreviated names, not all companies are listed on any stock exchange). > > To do this properly, the drivers are going to have to be compatible with the > old and the new names, and the binding docs updated to reflect the legacy > name and the preferred name. > Do you mean it's better to support both legacy and preferred name at the same time? > thx, > > Jason. > > > diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt > > b/Documentation/devicetree/bindings/arm/mrvl/intc.txt > > index 8b53273..ad27548 100644 > > --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt > > +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt > > @@ -1,8 +1,8 @@ > > * Marvell MMP Interrupt controller > > > > Required properties: > > -- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or > > - "mrvl,mmp2-mux-intc" > > +- compatible : Should be "marvell,mmp-intc", "marvell,mmp2-intc" or > > + "marvell,mmp2-mux-intc" > > - reg : Address and length of the register set of the interrupt controller. > > If the interrupt controller is intc, address and length means the range > > of the whold interrupt controller. If the interrupt controller is > > mux-intc, @@ -15,28 +15,28 @@ Required properties: > > - interrupt-controller : Identifies the node as an interrupt controller. > > - #interrupt-cells : Specifies the number of cells needed to encode an > > interrupt source. > > -- mrvl,intc-nr-irqs : Specifies the number of interrupts in the > > interrupt > > +- marvell,intc-nr-irqs : Specifies the number of interrupts in the > > +interrupt > > controller. > > -- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP > > edge > > +- marvell,clr-mfp-irq : Specifies the interrupt that needs to clear > > +MFP edge > > detection first. > > > > Example: > > intc: interrupt-controller@d4282000 { > > - compatible = "mrvl,mmp2-intc"; > > + compatible = "marvell,mmp2-intc"; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0xd4282000 0x1000>; > > - mrvl,intc-nr-irqs = <64>; > > + marvell,intc-nr-irqs = <64>; > > }; > > > > intcmux4@d4282150 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <4>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x150 0x4>, <0x168 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <2>; > > + marvell,intc-nr-irqs = <2>; > > }; > > > > * Marvell Orion Interrupt controller > > diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt > > b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt > > index 117d741..87f1d42 100644 > > --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt > > +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt > > @@ -3,12 +3,12 @@ Marvell Platforms Device Tree Bindings > > > > PXA168 Aspenite Board > > Required root node properties: > > - - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; > > + - compatible = "marvell,pxa168-aspenite", "marvell,pxa168"; > > > > PXA910 DKB Board > > Required root node properties: > > - - compatible = "mrvl,pxa910-dkb"; > > + - compatible = "marvell,pxa910-dkb"; > > > > MMP2 Brownstone Board > > Required root node properties: > > - - compatible = "mrvl,mmp2-brownstone"; > > + - compatible = "marvell,mmp2-brownstone"; > > diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt > > b/Documentation/devicetree/bindings/arm/mrvl/timer.txt > > index 9a6e251..1304526 100644 > > --- a/Documentation/devicetree/bindings/arm/mrvl/timer.txt > > +++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt > > @@ -1,13 +1,13 @@ > > * Marvell MMP Timer controller > > > > Required properties: > > -- compatible : Should be "mrvl,mmp-timer". > > +- compatible : Should be "marvell,mmp-timer". > > - reg : Address and length of the register set of timer controller. > > - interrupts : Should be the interrupt number. > > > > Example: > > timer0: timer@d4014000 { > > - compatible = "mrvl,mmp-timer"; > > + compatible = "marvell,mmp-timer"; > > reg = <0xd4014000 0x100>; > > interrupts = <13>; > > }; > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt > > b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt > > index 12b78ac..34fdf5d 100644 > > --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt > > +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt > > @@ -3,9 +3,9 @@ > > Required properties : > > > > - reg : Offset and length of the register set for the device > > - - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a > > + - compatible : should be "marvell,mmp-twsi" where mmp is the name of > > + a > > compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. > > - For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required > > + For the pxa2xx/pxa3xx, an additional node "marvell,pxa-i2c" is > > + required > > as shown in the example below. > > > > Recommended properties : > > @@ -14,20 +14,20 @@ Recommended properties : > > - interrupt-parent : the phandle for the interrupt controller that > > services interrupts for this device. If the parent is the default > > interrupt controller in device tree, it could be ignored. > > - - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling > > + - marvell,i2c-polling : Disable interrupt of i2c controller. Polling > > status register of i2c controller instead. > > - - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. > > + - marvell,i2c-fast-mode : Enable fast mode of i2c controller. > > > > Examples: > > twsi1: i2c@d4011000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > reg = <0xd4011000 0x1000>; > > interrupts = <7>; > > - mrvl,i2c-fast-mode; > > + marvell,i2c-fast-mode; > > }; > > > > twsi2: i2c@d4025000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > reg = <0xd4025000 0x1000>; > > interrupts = <58>; > > }; > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt > > b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt > > index dbe98a3..d603a3e 100644 > > --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt > > +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt > > @@ -4,18 +4,18 @@ This file documents differences between the core > > properties in mmc.txt and the properties used by the sdhci-pxav2 and > sdhci-pxav3 drivers. > > > > Required properties: > > -- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc". > > +- compatible: Should be "marvell,pxav2-mmc" or "marvell,pxav3-mmc". > > > > Optional properties: > > -- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning. > > +- marvell,clk-delay-cycles: Specify a number of cycles to delay for tuning. > > > > Example: > > > > sdhci@d4280800 { > > - compatible = "mrvl,pxav3-mmc"; > > + compatible = "marvell,pxav3-mmc"; > > reg = <0xd4280800 0x800>; > > bus-width = <8>; > > interrupts = <27>; > > non-removable; > > - mrvl,clk-delay-cycles = <31>; > > + marvell,clk-delay-cycles = <31>; > > }; > > diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt > > b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt > > index 0cda19a..886fe15 100644 > > --- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt > > +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt > > @@ -1,7 +1,7 @@ > > * Marvell Real Time Clock controller > > > > Required properties: > > -- compatible: should be "mrvl,sa1100-rtc" > > +- compatible: should be "marvell,sa1100-rtc" > > - reg: physical base address of the controller and length of memory > mapped > > region. > > - interrupts: Should be two. The first interrupt number is the rtc > > alarm @@ -10,7 +10,7 @@ Required properties: > > > > Example: > > rtc: rtc@d4010000 { > > - compatible = "mrvl,mmp-rtc"; > > + compatible = "marvell,mmp-rtc"; > > reg = <0xd4010000 0x1000>; > > interrupts = <5>, <6>; > > interrupt-name = "rtc 1Hz", "rtc alarm"; diff --git > > a/Documentation/devicetree/bindings/serial/mrvl-serial.txt > > b/Documentation/devicetree/bindings/serial/mrvl-serial.txt > > index d744340..659d35e 100644 > > --- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt > > +++ b/Documentation/devicetree/bindings/serial/mrvl-serial.txt > > @@ -1,4 +1,4 @@ > > PXA UART controller > > > > Required properties: > > -- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart". > > +- compatible : should be "marvell,mmp-uart" or "marvell,pxa-uart". > > diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts > > b/arch/arm/boot/dts/mmp2-brownstone.dts > > index 7f70a39..26abfde 100644 > > --- a/arch/arm/boot/dts/mmp2-brownstone.dts > > +++ b/arch/arm/boot/dts/mmp2-brownstone.dts > > @@ -12,7 +12,7 @@ > > > > / { > > model = "Marvell MMP2 Brownstone Development Board"; > > - compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; > > + compatible = "marvell,mmp2-brownstone", "marvell,mmp2"; > > > > chosen { > > bootargs = "console=ttyS2,38400 root=/dev/nfs > > nfsroot=192.168.1.100:/nfsroot/ > > ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; > > diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi > > index 4e8b08c..ac13654 100644 > > --- a/arch/arm/boot/dts/mmp2.dtsi > > +++ b/arch/arm/boot/dts/mmp2.dtsi > > @@ -32,128 +32,128 @@ > > }; > > > > axi@d4200000 { /* AXI */ > > - compatible = "mrvl,axi-bus", "simple-bus"; > > + compatible = "marvell,axi-bus", "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > reg = <0xd4200000 0x00200000>; > > ranges; > > > > intc: interrupt-controller@d4282000 { > > - compatible = "mrvl,mmp2-intc"; > > + compatible = "marvell,mmp2-intc"; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0xd4282000 0x1000>; > > - mrvl,intc-nr-irqs = <64>; > > + marvell,intc-nr-irqs = <64>; > > }; > > > > intcmux4: interrupt-controller@d4282150 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <4>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x150 0x4>, <0x168 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <2>; > > + marvell,intc-nr-irqs = <2>; > > }; > > > > intcmux5: interrupt-controller@d4282154 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <5>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x154 0x4>, <0x16c 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <2>; > > - mrvl,clr-mfp-irq = <1>; > > + marvell,intc-nr-irqs = <2>; > > + marvell,clr-mfp-irq = <1>; > > }; > > > > intcmux9: interrupt-controller@d4282180 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <9>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x180 0x4>, <0x17c 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <3>; > > + marvell,intc-nr-irqs = <3>; > > }; > > > > intcmux17: interrupt-controller@d4282158 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <17>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x158 0x4>, <0x170 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <5>; > > + marvell,intc-nr-irqs = <5>; > > }; > > > > intcmux35: interrupt-controller@d428215c { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <35>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x15c 0x4>, <0x174 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <15>; > > + marvell,intc-nr-irqs = <15>; > > }; > > > > intcmux51: interrupt-controller@d4282160 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <51>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x160 0x4>, <0x178 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <2>; > > + marvell,intc-nr-irqs = <2>; > > }; > > > > intcmux55: interrupt-controller@d4282188 { > > - compatible = "mrvl,mmp2-mux-intc"; > > + compatible = "marvell,mmp2-mux-intc"; > > interrupts = <55>; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0x188 0x4>, <0x184 0x4>; > > reg-names = "mux status", "mux mask"; > > - mrvl,intc-nr-irqs = <2>; > > + marvell,intc-nr-irqs = <2>; > > }; > > }; > > > > apb@d4000000 { /* APB */ > > - compatible = "mrvl,apb-bus", "simple-bus"; > > + compatible = "marvell,apb-bus", "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > reg = <0xd4000000 0x00200000>; > > ranges; > > > > timer0: timer@d4014000 { > > - compatible = "mrvl,mmp-timer"; > > + compatible = "marvell,mmp-timer"; > > reg = <0xd4014000 0x100>; > > interrupts = <13>; > > }; > > > > uart1: uart@d4030000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4030000 0x1000>; > > interrupts = <27>; > > status = "disabled"; > > }; > > > > uart2: uart@d4017000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4017000 0x1000>; > > interrupts = <28>; > > status = "disabled"; > > }; > > > > uart3: uart@d4018000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4018000 0x1000>; > > interrupts = <24>; > > status = "disabled"; > > }; > > > > uart4: uart@d4016000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4016000 0x1000>; > > interrupts = <46>; > > status = "disabled"; > > @@ -198,24 +198,24 @@ > > }; > > > > twsi1: i2c@d4011000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > reg = <0xd4011000 0x1000>; > > interrupts = <7>; > > #address-cells = <1>; > > #size-cells = <0>; > > - mrvl,i2c-fast-mode; > > + marvell,i2c-fast-mode; > > status = "disabled"; > > }; > > > > twsi2: i2c@d4025000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > reg = <0xd4025000 0x1000>; > > interrupts = <58>; > > status = "disabled"; > > }; > > > > rtc: rtc@d4010000 { > > - compatible = "mrvl,mmp-rtc"; > > + compatible = "marvell,mmp-rtc"; > > reg = <0xd4010000 0x1000>; > > interrupts = <1 0>; > > interrupt-names = "rtc 1Hz", "rtc alarm"; diff --git > > a/arch/arm/boot/dts/pxa168-aspenite.dts > > b/arch/arm/boot/dts/pxa168-aspenite.dts > > index e762fac..1e2ac17 100644 > > --- a/arch/arm/boot/dts/pxa168-aspenite.dts > > +++ b/arch/arm/boot/dts/pxa168-aspenite.dts > > @@ -12,7 +12,7 @@ > > > > / { > > model = "Marvell PXA168 Aspenite Development Board"; > > - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; > > + compatible = "marvell,pxa168-aspenite", "marvell,pxa168"; > > > > chosen { > > bootargs = "console=ttyS0,115200 root=/dev/nfs > > nfsroot=192.168.1.100:/nfsroot/ > > ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; > > diff --git a/arch/arm/boot/dts/pxa168.dtsi > > b/arch/arm/boot/dts/pxa168.dtsi index 975dad2..c08f5fc 100644 > > --- a/arch/arm/boot/dts/pxa168.dtsi > > +++ b/arch/arm/boot/dts/pxa168.dtsi > > @@ -26,51 +26,51 @@ > > ranges; > > > > axi@d4200000 { /* AXI */ > > - compatible = "mrvl,axi-bus", "simple-bus"; > > + compatible = "marvell,axi-bus", "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > reg = <0xd4200000 0x00200000>; > > ranges; > > > > intc: interrupt-controller@d4282000 { > > - compatible = "mrvl,mmp-intc"; > > + compatible = "marvell,mmp-intc"; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0xd4282000 0x1000>; > > - mrvl,intc-nr-irqs = <64>; > > + marvell,intc-nr-irqs = <64>; > > }; > > > > }; > > > > apb@d4000000 { /* APB */ > > - compatible = "mrvl,apb-bus", "simple-bus"; > > + compatible = "marvell,apb-bus", "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > reg = <0xd4000000 0x00200000>; > > ranges; > > > > timer0: timer@d4014000 { > > - compatible = "mrvl,mmp-timer"; > > + compatible = "marvell,mmp-timer"; > > reg = <0xd4014000 0x100>; > > interrupts = <13>; > > }; > > > > uart1: uart@d4017000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4017000 0x1000>; > > interrupts = <27>; > > status = "disabled"; > > }; > > > > uart2: uart@d4018000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4018000 0x1000>; > > interrupts = <28>; > > status = "disabled"; > > }; > > > > uart3: uart@d4026000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4026000 0x1000>; > > interrupts = <29>; > > status = "disabled"; > > @@ -107,22 +107,22 @@ > > }; > > > > twsi1: i2c@d4011000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > reg = <0xd4011000 0x1000>; > > interrupts = <7>; > > - mrvl,i2c-fast-mode; > > + marvell,i2c-fast-mode; > > status = "disabled"; > > }; > > > > twsi2: i2c@d4025000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > reg = <0xd4025000 0x1000>; > > interrupts = <58>; > > status = "disabled"; > > }; > > > > rtc: rtc@d4010000 { > > - compatible = "mrvl,mmp-rtc"; > > + compatible = "marvell,mmp-rtc"; > > reg = <0xd4010000 0x1000>; > > interrupts = <5 6>; > > interrupt-names = "rtc 1Hz", "rtc alarm"; diff --git > > a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index > > a5e90f0..c426b1e 100644 > > --- a/arch/arm/boot/dts/pxa2xx.dtsi > > +++ b/arch/arm/boot/dts/pxa2xx.dtsi > > @@ -47,7 +47,7 @@ > > }; > > > > gpio: gpio@40e00000 { > > - compatible = "mrvl,pxa-gpio"; > > + compatible = "marvell,pxa-gpio"; > > #address-cells = <0x1>; > > #size-cells = <0x1>; > > reg = <0x40e00000 0x10000>; > > @@ -76,35 +76,35 @@ > > }; > > > > ffuart: uart@40100000 { > > - compatible = "mrvl,pxa-uart"; > > + compatible = "marvell,pxa-uart"; > > reg = <0x40100000 0x30>; > > interrupts = <22>; > > status = "disabled"; > > }; > > > > btuart: uart@40200000 { > > - compatible = "mrvl,pxa-uart"; > > + compatible = "marvell,pxa-uart"; > > reg = <0x40200000 0x30>; > > interrupts = <21>; > > status = "disabled"; > > }; > > > > stuart: uart@40700000 { > > - compatible = "mrvl,pxa-uart"; > > + compatible = "marvell,pxa-uart"; > > reg = <0x40700000 0x30>; > > interrupts = <20>; > > status = "disabled"; > > }; > > > > hwuart: uart@41100000 { > > - compatible = "mrvl,pxa-uart"; > > + compatible = "marvell,pxa-uart"; > > reg = <0x41100000 0x30>; > > interrupts = <7>; > > status = "disabled"; > > }; > > > > pxai2c1: i2c@40301680 { > > - compatible = "mrvl,pxa-i2c"; > > + compatible = "marvell,pxa-i2c"; > > reg = <0x40301680 0x30>; > > interrupts = <18>; > > #address-cells = <0x1>; > > @@ -113,14 +113,14 @@ > > }; > > > > usb0: ohci@4c000000 { > > - compatible = "mrvl,pxa-ohci"; > > + compatible = "marvell,pxa-ohci"; > > reg = <0x4c000000 0x10000>; > > interrupts = <3>; > > status = "disabled"; > > }; > > > > mmc0: mmc@41100000 { > > - compatible = "mrvl,pxa-mmc"; > > + compatible = "marvell,pxa-mmc"; > > reg = <0x41100000 0x1000>; > > interrupts = <23>; > > status = "disabled"; > > diff --git a/arch/arm/boot/dts/pxa3xx.dtsi > > b/arch/arm/boot/dts/pxa3xx.dtsi index f9d92da..0798031 100644 > > --- a/arch/arm/boot/dts/pxa3xx.dtsi > > +++ b/arch/arm/boot/dts/pxa3xx.dtsi > > @@ -7,7 +7,7 @@ > > > > pxabus { > > pwri2c: i2c@40f500c0 { > > - compatible = "mrvl,pwri2c"; > > + compatible = "marvell,pwri2c"; > > reg = <0x40f500c0 0x30>; > > interrupts = <6>; > > #address-cells = <0x1>; > > diff --git a/arch/arm/boot/dts/pxa910-dkb.dts > > b/arch/arm/boot/dts/pxa910-dkb.dts > > index 595492a..7384254 100644 > > --- a/arch/arm/boot/dts/pxa910-dkb.dts > > +++ b/arch/arm/boot/dts/pxa910-dkb.dts > > @@ -12,7 +12,7 @@ > > > > / { > > model = "Marvell PXA910 DKB Development Board"; > > - compatible = "mrvl,pxa910-dkb", "mrvl,pxa910"; > > + compatible = "marvell,pxa910-dkb", "marvell,pxa910"; > > > > chosen { > > bootargs = "console=ttyS0,115200 root=/dev/nfs > > nfsroot=192.168.1.100:/nfsroot/ > > ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; > > diff --git a/arch/arm/boot/dts/pxa910.dtsi > > b/arch/arm/boot/dts/pxa910.dtsi index 0247c62..b5594a0 100644 > > --- a/arch/arm/boot/dts/pxa910.dtsi > > +++ b/arch/arm/boot/dts/pxa910.dtsi > > @@ -31,58 +31,59 @@ > > }; > > > > axi@d4200000 { /* AXI */ > > - compatible = "mrvl,axi-bus", "simple-bus"; > > + compatible = "marvell,axi-bus", "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > reg = <0xd4200000 0x00200000>; > > ranges; > > > > intc: interrupt-controller@d4282000 { > > - compatible = "mrvl,mmp-intc"; > > + compatible = "marvell,mmp-intc"; > > interrupt-controller; > > #interrupt-cells = <1>; > > reg = <0xd4282000 0x1000>; > > - mrvl,intc-nr-irqs = <64>; > > + marvell,intc-nr-irqs = <64>; > > + > > }; > > > > }; > > > > apb@d4000000 { /* APB */ > > - compatible = "mrvl,apb-bus", "simple-bus"; > > + compatible = "marvell,apb-bus", "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > reg = <0xd4000000 0x00200000>; > > ranges; > > > > timer0: timer@d4014000 { > > - compatible = "mrvl,mmp-timer"; > > + compatible = "marvell,mmp-timer"; > > reg = <0xd4014000 0x100>; > > interrupts = <13>; > > }; > > > > timer1: timer@d4016000 { > > - compatible = "mrvl,mmp-timer"; > > + compatible = "marvell,mmp-timer"; > > reg = <0xd4016000 0x100>; > > interrupts = <29>; > > status = "disabled"; > > }; > > > > uart1: uart@d4017000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4017000 0x1000>; > > interrupts = <27>; > > status = "disabled"; > > }; > > > > uart2: uart@d4018000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4018000 0x1000>; > > interrupts = <28>; > > status = "disabled"; > > }; > > > > uart3: uart@d4036000 { > > - compatible = "mrvl,mmp-uart"; > > + compatible = "marvell,mmp-uart"; > > reg = <0xd4036000 0x1000>; > > interrupts = <59>; > > status = "disabled"; > > @@ -119,17 +120,17 @@ > > }; > > > > twsi1: i2c@d4011000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > #address-cells = <1>; > > #size-cells = <0>; > > reg = <0xd4011000 0x1000>; > > interrupts = <7>; > > - mrvl,i2c-fast-mode; > > + marvell,i2c-fast-mode; > > status = "disabled"; > > }; > > > > twsi2: i2c@d4037000 { > > - compatible = "mrvl,mmp-twsi"; > > + compatible = "marvell,mmp-twsi"; > > #address-cells = <1>; > > #size-cells = <0>; > > reg = <0xd4037000 0x1000>; > > @@ -138,7 +139,7 @@ > > }; > > > > rtc: rtc@d4010000 { > > - compatible = "mrvl,mmp-rtc"; > > + compatible = "marvell,mmp-rtc"; > > reg = <0xd4010000 0x1000>; > > interrupts = <5 6>; > > interrupt-names = "rtc 1Hz", "rtc alarm"; diff --git > > a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index > > 3c71246..a7a53611 100644 > > --- a/arch/arm/mach-mmp/irq.c > > +++ b/arch/arm/mach-mmp/irq.c > > @@ -327,13 +327,13 @@ void __init mmp2_init_icu(void) > > > > #ifdef CONFIG_OF > > static const struct of_device_id intc_ids[] __initconst = { > > - { .compatible = "mrvl,mmp-intc", .data = &mmp_conf }, > > - { .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf }, > > + { .compatible = "marvell,mmp-intc", .data = &mmp_conf }, > > + { .compatible = "marvell,mmp2-intc", .data = &mmp2_conf }, > > {} > > }; > > > > static const struct of_device_id mmp_mux_irq_match[] __initconst = { > > - { .compatible = "mrvl,mmp2-mux-intc" }, > > + { .compatible = "marvell,mmp2-mux-intc" }, > > {} > > }; > > > > @@ -352,10 +352,10 @@ int __init mmp2_mux_init(struct device_node > *parent) > > if (!node) > > break; > > of_id = of_match_node(&mmp_mux_irq_match[0], node); > > - ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", > > + ret = of_property_read_u32(node, "marvell,intc-nr-irqs", > > &nr_irqs); > > if (ret) { > > - pr_err("Not found mrvl,intc-nr-irqs property\n"); > > + pr_err("Not found marvell,intc-nr-irqs property\n"); > > ret = -EINVAL; > > goto err; > > } > > @@ -385,7 +385,7 @@ int __init mmp2_mux_init(struct device_node > *parent) > > ret = irq_base; > > goto err; > > } > > - if (!of_property_read_u32(node, "mrvl,clr-mfp-irq", > > + if (!of_property_read_u32(node, "marvell,clr-mfp-irq", > > &mfp_irq)) { > > icu_data[i].clr_mfp_irq_base = irq_base; > > icu_data[i].clr_mfp_hwirq = mfp_irq; @@ -424,9 +424,9 @@ > void > > __init mmp_dt_irq_init(void) > > of_id = of_match_node(intc_ids, node); > > conf = of_id->data; > > > > - ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs); > > + ret = of_property_read_u32(node, "marvell,intc-nr-irqs", &nr_irqs); > > if (ret) { > > - pr_err("Not found mrvl,intc-nr-irqs property\n"); > > + pr_err("Not found marvell,intc-nr-irqs property\n"); > > return; > > } > > > > diff --git a/arch/arm/mach-mmp/mmp-dt.c > b/arch/arm/mach-mmp/mmp-dt.c > > index b37915d..62c5adb 100644 > > --- a/arch/arm/mach-mmp/mmp-dt.c > > +++ b/arch/arm/mach-mmp/mmp-dt.c > > @@ -23,24 +23,24 @@ extern void __init mmp_dt_irq_init(void); extern > > void __init mmp_dt_init_timer(void); > > > > static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst > = { > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4017000, "pxa2xx-uart.0", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4018000, "pxa2xx-uart.1", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4026000, "pxa2xx-uart.2", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", > > +NULL), > > OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), > > + OF_DEV_AUXDATA("marvell,mmp-rtc", 0xd4010000, "sa1100-rtc", > NULL), > > {} > > }; > > > > static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst > = { > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4017000, "pxa2xx-uart.0", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4018000, "pxa2xx-uart.1", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4036000, "pxa2xx-uart.2", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", > > +NULL), > > OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), > > + OF_DEV_AUXDATA("marvell,mmp-rtc", 0xd4010000, "sa1100-rtc", > NULL), > > {} > > }; > > > > @@ -57,8 +57,8 @@ static void __init pxa910_dt_init(void) } > > > > static const char *mmp_dt_board_compat[] __initdata = { > > - "mrvl,pxa168-aspenite", > > - "mrvl,pxa910-dkb", > > + "marvell,pxa168-aspenite", > > + "marvell,pxa910-dkb", > > NULL, > > }; > > > > diff --git a/arch/arm/mach-mmp/mmp2-dt.c > b/arch/arm/mach-mmp/mmp2-dt.c > > index 4ac2567..6523ecf 100644 > > --- a/arch/arm/mach-mmp/mmp2-dt.c > > +++ b/arch/arm/mach-mmp/mmp2-dt.c > > @@ -25,14 +25,14 @@ extern void __init mmp_dt_irq_init(void); extern > > void __init mmp_dt_init_timer(void); > > > > static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst > = { > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4030000, "pxa2xx-uart.0", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4017000, "pxa2xx-uart.1", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4018000, "pxa2xx-uart.2", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-uart", 0xd4016000, "pxa2xx-uart.3", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", > NULL), > > + OF_DEV_AUXDATA("marvell,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", > > +NULL), > > OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", > NULL), > > - OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), > > + OF_DEV_AUXDATA("marvell,mmp-rtc", 0xd4010000, "sa1100-rtc", > NULL), > > {} > > }; > > > > @@ -43,7 +43,7 @@ static void __init mmp2_dt_init(void) } > > > > static const char *mmp2_dt_board_compat[] __initdata = { > > - "mrvl,mmp2-brownstone", > > + "marvell,mmp2-brownstone", > > NULL, > > }; > > > > diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c > index > > 7ac41e8..67e7d5c 100644 > > --- a/arch/arm/mach-mmp/time.c > > +++ b/arch/arm/mach-mmp/time.c > > @@ -208,7 +208,7 @@ void __init timer_init(int irq) > > > > #ifdef CONFIG_OF > > static struct of_device_id mmp_timer_dt_ids[] = { > > - { .compatible = "mrvl,mmp-timer", }, > > + { .compatible = "marvell,mmp-timer", }, > > {} > > }; > > > > diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c > > index 3835979..b679367 100644 > > --- a/arch/arm/mach-pxa/pxa-dt.c > > +++ b/arch/arm/mach-pxa/pxa-dt.c > > @@ -23,15 +23,15 @@ > > extern void __init pxa3xx_dt_init_irq(void); > > > > static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst > = { > > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, > "pxa2xx-uart.0", NULL), > > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, > "pxa2xx-uart.1", NULL), > > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, > "pxa2xx-uart.2", NULL), > > - OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, > "pxa2xx-uart.3", NULL), > > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x40100000, > "pxa2xx-uart.0", NULL), > > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x40200000, > "pxa2xx-uart.1", NULL), > > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x40700000, > "pxa2xx-uart.2", NULL), > > + OF_DEV_AUXDATA("marvell,pxa-uart", 0x41600000, > "pxa2xx-uart.3", NULL), > > OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", > NULL), > > + OF_DEV_AUXDATA("marvell,pxa-gpio", 0x40e00000, "pxa-gpio", > NULL), > > OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", > NULL), > > - OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", > NULL), > > - OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", > NULL), > > + OF_DEV_AUXDATA("marvell,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", > NULL), > > + OF_DEV_AUXDATA("marvell,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", > NULL), > > OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", > NULL), > > {} > > }; > > diff --git a/drivers/i2c/busses/i2c-pxa.c > > b/drivers/i2c/busses/i2c-pxa.c index fbafed2..6f2b17d 100644 > > --- a/drivers/i2c/busses/i2c-pxa.c > > +++ b/drivers/i2c/busses/i2c-pxa.c > > @@ -1040,9 +1040,9 @@ static const struct i2c_algorithm > > i2c_pxa_pio_algorithm = { }; > > > > static struct of_device_id i2c_pxa_dt_ids[] = { > > - { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, > > - { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, > > - { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX }, > > + { .compatible = "marvell,pxa-i2c", .data = (void *)REGS_PXA2XX }, > > + { .compatible = "marvell,pwri2c", .data = (void *)REGS_PXA3XX }, > > + { .compatible = "marvell,mmp-twsi", .data = (void *)REGS_PXA2XX }, > > {} > > }; > > MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); @@ -1060,9 +1060,9 @@ > static > > int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, > > /* For device tree we always use the dynamic or alias-assigned ID */ > > i2c->adap.nr = -1; > > > > - if (of_get_property(np, "mrvl,i2c-polling", NULL)) > > + if (of_get_property(np, "marvell,i2c-polling", NULL)) > > i2c->use_pio = 1; > > - if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) > > + if (of_get_property(np, "marvell,i2c-fast-mode", NULL)) > > i2c->fast_mode = 1; > > *i2c_types = (u32)(of_id->data); > > return 0; > > diff --git a/drivers/mmc/host/sdhci-pxav2.c > > b/drivers/mmc/host/sdhci-pxav2.c index 6a3f702..1dd6500 100644 > > --- a/drivers/mmc/host/sdhci-pxav2.c > > +++ b/drivers/mmc/host/sdhci-pxav2.c > > @@ -120,7 +120,7 @@ static const struct sdhci_ops pxav2_sdhci_ops = { > > #ifdef CONFIG_OF static const struct of_device_id > > sdhci_pxav2_of_match[] = { > > { > > - .compatible = "mrvl,pxav2-mmc", > > + .compatible = "marvell,pxav2-mmc", > > }, > > {}, > > }; > > @@ -144,7 +144,7 @@ static struct sdhci_pxa_platdata > *pxav2_get_mmc_pdata(struct device *dev) > > if (bus_width == 8) > > pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT; > > > > - of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles); > > + of_property_read_u32(np, "marvell,clk-delay-cycles", > > +&clk_delay_cycles); > > if (clk_delay_cycles > 0) { > > pdata->clk_delay_sel = 1; > > pdata->clk_delay_cycles = clk_delay_cycles; diff --git > > a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c > > index 1ae358e..a88974b 100644 > > --- a/drivers/mmc/host/sdhci-pxav3.c > > +++ b/drivers/mmc/host/sdhci-pxav3.c > > @@ -185,7 +185,7 @@ static struct sdhci_pltfm_data sdhci_pxav3_pdata > = > > { #ifdef CONFIG_OF static const struct of_device_id > > sdhci_pxav3_of_match[] = { > > { > > - .compatible = "mrvl,pxav3-mmc", > > + .compatible = "marvell,pxav3-mmc", > > }, > > {}, > > }; > > @@ -201,7 +201,7 @@ static struct sdhci_pxa_platdata > *pxav3_get_mmc_pdata(struct device *dev) > > if (!pdata) > > return NULL; > > > > - of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles); > > + of_property_read_u32(np, "marvell,clk-delay-cycles", > > +&clk_delay_cycles); > > if (clk_delay_cycles > 0) > > pdata->clk_delay_cycles = clk_delay_cycles; > > > > diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index > > 0f7adeb..307dd37 100644 > > --- a/drivers/rtc/rtc-sa1100.c > > +++ b/drivers/rtc/rtc-sa1100.c > > @@ -339,8 +339,8 @@ static SIMPLE_DEV_PM_OPS(sa1100_rtc_pm_ops, > > sa1100_rtc_suspend, > > > > #ifdef CONFIG_OF > > static struct of_device_id sa1100_rtc_dt_ids[] = { > > - { .compatible = "mrvl,sa1100-rtc", }, > > - { .compatible = "mrvl,mmp-rtc", }, > > + { .compatible = "marvell,sa1100-rtc", }, > > + { .compatible = "marvell,mmp-rtc", }, > > {} > > }; > > MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids); diff --git > > a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index > > 05f504e..cb1a439 100644 > > --- a/drivers/tty/serial/pxa.c > > +++ b/drivers/tty/serial/pxa.c > > @@ -852,8 +852,8 @@ static const struct dev_pm_ops > serial_pxa_pm_ops = > > { #endif > > > > static struct of_device_id serial_pxa_dt_ids[] = { > > - { .compatible = "mrvl,pxa-uart", }, > > - { .compatible = "mrvl,mmp-uart", }, > > + { .compatible = "marvell,pxa-uart", }, > > + { .compatible = "marvell,mmp-uart", }, > > {} > > }; > > MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); > > -- > > 1.7.4.1 > > > > Best Regards, Neil Zhang > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel {.n++%ݶw{.n+{G{ayʇڙ,jfhz_(階ݢj"mG?&~iOzv^m ?I