* [Bluez-users] Logitech Traveler Headset. Progress but not there yet. Advice wanted.]
@ 2006-08-23 22:25 Bearcat M. Sandor
2006-08-24 4:05 ` [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked Bearcat M. Sandor
0 siblings, 1 reply; 9+ messages in thread
From: Bearcat M. Sandor @ 2006-08-23 22:25 UTC (permalink / raw)
To: bluez-users
In addition to the information below, when when the snd_bt_sco module
loads at boot time i get the following in my dmsg log file:
#
#
snd-bt-sco revision 1.12 $
#
#
==========================================
#
[ BUG: lock recursion deadlock detected! |
#
------------------------------------------
#
#
modprobe/2715 is trying to acquire this lock:
#
[ffff81003e00a880] {snd_card_bt_sco_probe}
#
.. held by: modprobe: 2715 [ffff81003cda86f0, 125]
#
... acquired at: alsa_card_bt_sco_init+0xba/0x2f1
[snd_bt_sco]
#
... trying at: alsa_card_bt_sco_init+0x13a/0x2f1
[snd_bt_sco]
#
------------------------------
#
| showing all locks held by: | (modprobe/2715 [ffff81003cda86f0, 125]): #
------------------------------
#
#
#001: [ffff81003e00a880] {snd_card_bt_sco_probe}
#
... acquired at: alsa_card_bt_sco_init+0xba/0x2f1
[snd_bt_sco]
#
#
#
modprobe/2715's [current] stackdump:
#
#
#
Call Trace: <ffffffff8023719a>{report_deadlock+319}
#
<ffffffff8805919d>{:snd_bt_sco:alsa_card_bt_sco_init+314}
#
<ffffffff80237310>{check_deadlock+346}
<ffffffff80237330>{debug_mutex_add_waiter+21}
#
<ffffffff8805919d>{:snd_bt_sco:alsa_card_bt_sco_init+314}
#
<ffffffff805c072e>{__mutex_lock_slowpath+240}
<ffffffff80209f82>{child_rip+0}
#
<ffffffff8805919d>{:snd_bt_sco:alsa_card_bt_sco_init+314}
#
<ffffffff8023aada>{sys_init_module+4722}
<ffffffff8020954e>{system_call+126}
#
#
Showing all blocking locks in the system:
#
S init: 1 [ffff81003ff81450, 117] (not blocked on mutex) #
R ksoftirqd/0: 2 [ffff81003ff80da0, 134] (not blocked on mutex) #
S watchdog/0: 3 [ffff81003ff806f0, 0] (not blocked on mutex) #
S events/0: 4 [ffff81003ff80040, 110] (not blocked on mutex) #
S khelper: 5 [ffff81003ff9b490, 110] (not blocked on mutex) #
S kthread: 6 [ffff81003ff9ade0, 110] (not blocked on mutex) #
S kblockd/0: 8 [ffff81003ff9a080, 110] (not blocked on mutex) #
S kacpid: 9 [ffff81003fe5d4d0, 120] (not blocked on mutex) #
S khubd: 144 [ffff81003fc16300, 110] (not blocked on mutex) #
S kseriod: 146 [ffff81003fe5c0c0, 110] (not blocked on mutex) #
S pdflush: 233 [ffff81003f8f8830, 120] (not blocked on mutex) #
S pdflush: 234 [ffff81003f8f8180, 115] (not blocked on mutex) #
S kswapd0: 235 [ffff81003f9035d0, 125] (not blocked on mutex) #
S aio/0: 236 [ffff81003f902f20, 120] (not blocked on mutex) #
S jfsIO: 237 [ffff81003f902870, 120] (not blocked on mutex) #
S jfsCommit: 238 [ffff81003f9021c0, 120] (not blocked on mutex) #
S jfsSync: 239 [ffff81003f6e9610, 120] (not blocked on mutex) #
S xfslogd/0: 240 [ffff81003f6e8f60, 120] (not blocked on mutex) #
S xfsdatad/0: 241 [ffff81003f6e88b0, 120] (not blocked on mutex) #
S ata/0: 915 [ffff81003ed8eda0, 110] (not blocked on mutex) #
S scsi_eh_0: 922 [ffff81003ed98de0, 111] (not blocked on mutex) #
S scsi_eh_1: 923 [ffff81003ed99490, 111] (not blocked on mutex) #
S scsi_eh_2: 924 [ffff81003ed564c0, 111] (not blocked on mutex) #
S scsi_eh_3: 925 [ffff81003ed65910, 111] (not blocked on mutex) #
S scsi_eh_4: 935 [ffff81003ed65260, 111] (not blocked on mutex) #
S scsi_eh_5: 936 [ffff81003f045890, 111] (not blocked on mutex) #
S scsi_eh_6: 939 [ffff81003ed8e6f0, 111] (not blocked on mutex) #
S scsi_eh_7: 940 [ffff81003ed8f450, 111] (not blocked on mutex) #
S khpsbpkt: 959 [ffff81003ed64bb0, 117] (not blocked on mutex) #
D scsi_eh_8: 983 [ffff81003ed57220, 110] (not blocked on mutex) #
S usb-storage: 984 [ffff81003f8f8ee0, 110] (not blocked on mutex) #
D usb-stor-scan: 986 [ffff81003ed8e040, 110] (not blocked on mutex) #
S kpsmoused: 1010 [ffff81003f0451e0, 111] (not blocked on mutex) #
S kcryptd/0: 1014 [ffff81003ed98730, 111] (not blocked on mutex) #
S reiserfs/0: 1021 [ffff81003eda2770, 111] (not blocked on mutex) #
S init: 1027 [ffff81003f044b30, 116] (not blocked on mutex) #
S rc: 1028 [ffff81003f70b0a0, 125] (not blocked on mutex) #
S need: 1087 [ffff81003f6e8200, 125] (not blocked on mutex) #
S rc: 1088 [ffff81003f70a340, 116] (not blocked on mutex) #
S rc: 1091 [ffff81003f7150e0, 119] (not blocked on mutex) #
S need: 1092 [ffff81003f700300, 119] (not blocked on mutex) #
S rc: 1093 [ffff81003f715790, 115] (not blocked on mutex) #
S rc: 1096 [ffff81003ff9a730, 119] (not blocked on mutex) #
S need: 1097 [ffff81003ed56b70, 119] (not blocked on mutex) #
S rc: 1098 [ffff81003fc169b0, 115] (not blocked on mutex) #
S rc: 1101 [ffff81003ed578d0, 120] (not blocked on mutex) #
S need: 1102 [ffff81003f714a30, 120] (not blocked on mutex) #
S rc: 1103 [ffff81003fc17710, 119] (not blocked on mutex) #
S rc: 1106 [ffff81003fc17060, 116] (not blocked on mutex) #
R udevd: 1319 [ffff81003eda2e20, 114] (not blocked on mutex) #
S shpchpd: 2111 [ffff81003f88d690, 111] (not blocked on mutex) #
S kgameportd: 2118 [ffff81003f88c930, 111] (not blocked on mutex) #
S need: 2433 [ffff81003f882240, 116] (not blocked on mutex) #
S hwclock.sh: 2434 [ffff81003d6c4300, 118] (not blocked on mutex) #
S hwclock.sh: 2438 [ffff81003fe5c770, 121] (not blocked on mutex) #
S need: 2440 [ffff81003f044480, 121] (not blocked on mutex) #
S mountall.sh: 2441 [ffff81003f8828f0, 120] (not blocked on mutex) #
S mountall.sh: 2445 [ffff81003f8f9590, 116] (not blocked on mutex) #
S fsck.reiserfs: 2503 [ffff81003f883650, 118] (not blocked on mutex) #
S need: 2558 [ffff81003c849550, 116] (not blocked on mutex) #
S modutils: 2559 [ffff81003f701710, 123] (not blocked on mutex) #
R modutils: 2599 [ffff81003ed98080, 125] (not blocked on mutex) #
R modutils: 2714 [ffff81003eda20c0, 125] (not blocked on mutex) #
R modprobe: 2715 [ffff81003cda86f0, 125] (not blocked on mutex) #
R modprobe: 2717 [ffff81003f7009b0, 125] (not blocked on mutex) #
#
---------------------------
#
| showing all locks held: |
#
---------------------------
#
#
#001: [ffff81003ed86850] {scsi_host_alloc}
#
.. held by: usb-stor-scan: 986 [ffff81003ed8e040, 110]
#
... acquired at: scsi_scan_host_selected+0xaa/0x113
#
#
#002: [ffff81003ed86c98] {storage_probe}
#
.. held by: usb-storage: 984 [ffff81003f8f8ee0, 110]
#
... acquired at: usb_stor_control_thread+0x46/0x19e
#
#
#003: [ffff81003e00a880] {snd_card_bt_sco_probe}
#
.. held by: modprobe: 2715 [ffff81003cda86f0, 125]
#
... acquired at: alsa_card_bt_sco_init+0xba/0x2f1
[snd_bt_sco]
#
#
=============================================
#
#
[ turning off deadlock detection. Please report this. ]
#
#
snd-bt-sco: snd-bt-scod thread starting
#
Adding 2097144k swap on /swapfile. Priority:-1 extents:205
across:2318040k
---------------------------- Original Message ----------------------------
Subject: Re: [Bluez-users] Logitech Traveler Headset. Progress but not
there yet. Advice wanted.
From: "Bearcat M. Sandor" <Linux@feline-soul.com>
Date: Tue, August 22, 2006 00:37
To: bluez-users@lists.sourceforge.net
--------------------------------------------------------------------------
Ok, I am getting further. I have the snd_bt_sco module loaded.
Doing a btsco 00:0D:44:4F:37:72 gives me
Error: Failed to connect to SDP server: Function not implemented
Assuming channel 2
Can't connect RFCOMM channel: Resource temporarily unavailable
I'm a newbie at this bluetooth stuff. I'm not sure if i'm supposed to start
the rfcomm program or what parameters i should send.
My config files are listed in the preceding emails.
Thank you for the help so far,
Bearcat M. Sandor
On Monday 21 August 2006 21:31 in an email titled "Re: [Bluez-users] Logitech
Traveler Headset. Progress but not there yet. Advice wanted." Bearcat M.
Sandor wrote:
>Brad,
>Thank you. That was immensely helpful. I have btsco installed. I have
followed the steps at the link you provided.
>I change to root user.
>After the "hciconfig hci0 voice 0x0060" is given my hciconfig looks like:
hci0: Type: USB
> BD Address: 00:07:61:1C:9F:D3 ACL MTU: 192:8 SCO MTU: 64:8 UP
RUNNING PSCAN
> RX bytes:3908436 acl:279025 sco:0 events:1181 errors:0
> TX bytes:1936 acl:16 sco:0 commands:192 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing, Object
Transfer,
>Audio
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x34e LMP Ver: 1.1 (0x1) LMP Subver:
> 0x34e Manufacturer: Cambridge Silicon Radio (10)
>Then i issue the "btsco 00:0D:44:4F:37:72" and i get:
>Error: hwdep next device (hw:0): Operation not permitted
>Error: hwdep next device (hw:1): Operation not permitted
>Error: control open (hw:2): No such device
>Error: Can't find device. Bail
>Bearcat M. Sandor
>On Monday 21 August 2006 20:35 in an email titled "Re: [Bluez-users]
> Logitech Traveler Headset. Progress but not there yet. Advice wanted."
Brad
> Midgley
>wrote:
>>Bearcat
>>> on button to get it to start paring. Then i issue a "hidd --connect
00:0D:44:4F:37:72" After awhile the headset stops blinking and "Can't
get
>>> device information: Function not implemented" is returned for the hidd
--connect.
>>hidd is for connecting the keyboard/mouse/etc but not the headset. Check
with the docs at bluetooth-alsa.sf.net.
>>Brad
>>-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services,
security?
>>Get stuff done quickly with pre-integrated technology to make your job
>> easier Download IBM WebSphere Application Server v.1.0.1 based on
Apache
>> Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
>>Bluez-users mailing list
>>Bluez-users@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/bluez-users
--
Bearcat M. Sandor
Bearcat@feline-soul.com
Jabber: bearcat@jabber.feline-soul.net
ICQ: 6628727
MSN: bearcatsandor@hotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-23 22:25 [Bluez-users] Logitech Traveler Headset. Progress but not there yet. Advice wanted.] Bearcat M. Sandor
@ 2006-08-24 4:05 ` Bearcat M. Sandor
2006-08-24 4:34 ` Brad Midgley
0 siblings, 1 reply; 9+ messages in thread
From: Bearcat M. Sandor @ 2006-08-24 4:05 UTC (permalink / raw)
To: BlueZ users
Folks,
It seems like this is the same old problem that has been plaguing me for a
month now. I need to feed this headset a pin of 0000 and i am NEVER asked for
a pin no matter what i put into the config file.
The following lines are pertainant:
security user;
# Default PIN code for incoming connections
#passkey "0000";
#pin_helper /etc/bluetooth/pin_script;
pin_helper /usr/lib/kdebluetooth/kbluepin;
If i set security to auto it and set make the passkey uncommented it does not
work. No pin script runs and /etc/bluetooth/passkeys/00:0D:44:4F:37:72
and /etc/bluetooth/passkeys/default are never looked at.
What can i do? What can i provide?
My hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.31
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0D:44:4F:37:72
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:0D:44:4F:37:72
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:0D:44:4F:37:72
> HCI Event: Connect Complete (0x03) plen 11
status 0x18 handle 44 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00
Error: Pairing Not Allowed
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0D:44:4F:37:72
< HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6
bdaddr 00:0D:44:4F:37:72
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Negative Reply (0x01|0x000e) ncmd 1
status 0x00 bdaddr 00:0D:44:4F:37:72
> HCI Event: Connect Complete (0x03) plen 11
status 0x18 handle 45 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00
Error: Pairing Not Allowed
On Wednesday 23 August 2006 16:25 in an email titled "[Bluez-users] Logitech
Traveler Headset. Progress but not there yet. Advice wanted.]" Bearcat M.
Sandor wrote:
>In addition to the information below, when when the snd_bt_sco module
>loads at boot time i get the following in my dmsg log file:
>
>#
>#
>snd-bt-sco revision 1.12 $
>#
>
>#
>==========================================
>#
>[ BUG: lock recursion deadlock detected! |
>#
>------------------------------------------
>#
>
>#
>modprobe/2715 is trying to acquire this lock:
>#
> [ffff81003e00a880] {snd_card_bt_sco_probe}
>#
>.. held by: modprobe: 2715 [ffff81003cda86f0, 125]
>#
>... acquired at: alsa_card_bt_sco_init+0xba/0x2f1
>[snd_bt_sco]
>#
>... trying at: alsa_card_bt_sco_init+0x13a/0x2f1
>[snd_bt_sco]
>#
>------------------------------
>#
>
>| showing all locks held by: | (modprobe/2715 [ffff81003cda86f0, 125]): #
>
>------------------------------
>#
>
>#
>#001: [ffff81003e00a880] {snd_card_bt_sco_probe}
>#
>... acquired at: alsa_card_bt_sco_init+0xba/0x2f1
>[snd_bt_sco]
>#
>
>#
>
>#
>modprobe/2715's [current] stackdump:
>#
>
>#
>
>#
>Call Trace: <ffffffff8023719a>{report_deadlock+319}
>#
> <ffffffff8805919d>{:snd_bt_sco:alsa_card_bt_sco_init+314}
>#
> <ffffffff80237310>{check_deadlock+346}
><ffffffff80237330>{debug_mutex_add_waiter+21}
>#
> <ffffffff8805919d>{:snd_bt_sco:alsa_card_bt_sco_init+314}
>#
> <ffffffff805c072e>{__mutex_lock_slowpath+240}
><ffffffff80209f82>{child_rip+0}
>#
> <ffffffff8805919d>{:snd_bt_sco:alsa_card_bt_sco_init+314}
>#
> <ffffffff8023aada>{sys_init_module+4722}
><ffffffff8020954e>{system_call+126}
>#
>
>#
>Showing all blocking locks in the system:
>#
>S init: 1 [ffff81003ff81450, 117] (not blocked on mutex) #
>R ksoftirqd/0: 2 [ffff81003ff80da0, 134] (not blocked on mutex) #
>S watchdog/0: 3 [ffff81003ff806f0, 0] (not blocked on mutex) #
>S events/0: 4 [ffff81003ff80040, 110] (not blocked on mutex) #
>S khelper: 5 [ffff81003ff9b490, 110] (not blocked on mutex) #
>S kthread: 6 [ffff81003ff9ade0, 110] (not blocked on mutex) #
>S kblockd/0: 8 [ffff81003ff9a080, 110] (not blocked on mutex) #
>S kacpid: 9 [ffff81003fe5d4d0, 120] (not blocked on mutex) #
>S khubd: 144 [ffff81003fc16300, 110] (not blocked on mutex) #
>S kseriod: 146 [ffff81003fe5c0c0, 110] (not blocked on mutex) #
>S pdflush: 233 [ffff81003f8f8830, 120] (not blocked on mutex) #
>S pdflush: 234 [ffff81003f8f8180, 115] (not blocked on mutex) #
>S kswapd0: 235 [ffff81003f9035d0, 125] (not blocked on mutex) #
>S aio/0: 236 [ffff81003f902f20, 120] (not blocked on mutex) #
>S jfsIO: 237 [ffff81003f902870, 120] (not blocked on mutex) #
>S jfsCommit: 238 [ffff81003f9021c0, 120] (not blocked on mutex) #
>S jfsSync: 239 [ffff81003f6e9610, 120] (not blocked on mutex) #
>S xfslogd/0: 240 [ffff81003f6e8f60, 120] (not blocked on mutex) #
>S xfsdatad/0: 241 [ffff81003f6e88b0, 120] (not blocked on mutex) #
>S ata/0: 915 [ffff81003ed8eda0, 110] (not blocked on mutex) #
>S scsi_eh_0: 922 [ffff81003ed98de0, 111] (not blocked on mutex) #
>S scsi_eh_1: 923 [ffff81003ed99490, 111] (not blocked on mutex) #
>S scsi_eh_2: 924 [ffff81003ed564c0, 111] (not blocked on mutex) #
>S scsi_eh_3: 925 [ffff81003ed65910, 111] (not blocked on mutex) #
>S scsi_eh_4: 935 [ffff81003ed65260, 111] (not blocked on mutex) #
>S scsi_eh_5: 936 [ffff81003f045890, 111] (not blocked on mutex) #
>S scsi_eh_6: 939 [ffff81003ed8e6f0, 111] (not blocked on mutex) #
>S scsi_eh_7: 940 [ffff81003ed8f450, 111] (not blocked on mutex) #
>S khpsbpkt: 959 [ffff81003ed64bb0, 117] (not blocked on mutex) #
>D scsi_eh_8: 983 [ffff81003ed57220, 110] (not blocked on mutex) #
>S usb-storage: 984 [ffff81003f8f8ee0, 110] (not blocked on mutex) #
>D usb-stor-scan: 986 [ffff81003ed8e040, 110] (not blocked on mutex) #
>S kpsmoused: 1010 [ffff81003f0451e0, 111] (not blocked on mutex) #
>S kcryptd/0: 1014 [ffff81003ed98730, 111] (not blocked on mutex) #
>S reiserfs/0: 1021 [ffff81003eda2770, 111] (not blocked on mutex) #
>S init: 1027 [ffff81003f044b30, 116] (not blocked on mutex) #
>S rc: 1028 [ffff81003f70b0a0, 125] (not blocked on mutex) #
>S need: 1087 [ffff81003f6e8200, 125] (not blocked on mutex) #
>S rc: 1088 [ffff81003f70a340, 116] (not blocked on mutex) #
>S rc: 1091 [ffff81003f7150e0, 119] (not blocked on mutex) #
>S need: 1092 [ffff81003f700300, 119] (not blocked on mutex) #
>S rc: 1093 [ffff81003f715790, 115] (not blocked on mutex) #
>S rc: 1096 [ffff81003ff9a730, 119] (not blocked on mutex) #
>S need: 1097 [ffff81003ed56b70, 119] (not blocked on mutex) #
>S rc: 1098 [ffff81003fc169b0, 115] (not blocked on mutex) #
>S rc: 1101 [ffff81003ed578d0, 120] (not blocked on mutex) #
>S need: 1102 [ffff81003f714a30, 120] (not blocked on mutex) #
>S rc: 1103 [ffff81003fc17710, 119] (not blocked on mutex) #
>S rc: 1106 [ffff81003fc17060, 116] (not blocked on mutex) #
>R udevd: 1319 [ffff81003eda2e20, 114] (not blocked on mutex) #
>S shpchpd: 2111 [ffff81003f88d690, 111] (not blocked on mutex) #
>S kgameportd: 2118 [ffff81003f88c930, 111] (not blocked on mutex) #
>S need: 2433 [ffff81003f882240, 116] (not blocked on mutex) #
>S hwclock.sh: 2434 [ffff81003d6c4300, 118] (not blocked on mutex) #
>S hwclock.sh: 2438 [ffff81003fe5c770, 121] (not blocked on mutex) #
>S need: 2440 [ffff81003f044480, 121] (not blocked on mutex) #
>S mountall.sh: 2441 [ffff81003f8828f0, 120] (not blocked on mutex) #
>S mountall.sh: 2445 [ffff81003f8f9590, 116] (not blocked on mutex) #
>S fsck.reiserfs: 2503 [ffff81003f883650, 118] (not blocked on mutex) #
>S need: 2558 [ffff81003c849550, 116] (not blocked on mutex) #
>S modutils: 2559 [ffff81003f701710, 123] (not blocked on mutex) #
>R modutils: 2599 [ffff81003ed98080, 125] (not blocked on mutex) #
>R modutils: 2714 [ffff81003eda20c0, 125] (not blocked on mutex) #
>R modprobe: 2715 [ffff81003cda86f0, 125] (not blocked on mutex) #
>R modprobe: 2717 [ffff81003f7009b0, 125] (not blocked on mutex) #
>
>#
>---------------------------
>#
>
>| showing all locks held: |
>
>#
>---------------------------
>#
>
>#
>#001: [ffff81003ed86850] {scsi_host_alloc}
>#
>.. held by: usb-stor-scan: 986 [ffff81003ed8e040, 110]
>#
>... acquired at: scsi_scan_host_selected+0xaa/0x113
>#
>
>#
>#002: [ffff81003ed86c98] {storage_probe}
>#
>.. held by: usb-storage: 984 [ffff81003f8f8ee0, 110]
>#
>... acquired at: usb_stor_control_thread+0x46/0x19e
>#
>
>#
>#003: [ffff81003e00a880] {snd_card_bt_sco_probe}
>#
>.. held by: modprobe: 2715 [ffff81003cda86f0, 125]
>#
>... acquired at: alsa_card_bt_sco_init+0xba/0x2f1
>[snd_bt_sco]
>#
>
>#
>=============================================
>#
>
>#
>[ turning off deadlock detection. Please report this. ]
>#
>
>#
>snd-bt-sco: snd-bt-scod thread starting
>#
>Adding 2097144k swap on /swapfile. Priority:-1 extents:205
>across:2318040k
>
>---------------------------- Original Message ----------------------------
>Subject: Re: [Bluez-users] Logitech Traveler Headset. Progress but not
>there yet. Advice wanted.
>From: "Bearcat M. Sandor" <Linux@feline-soul.com>
>Date: Tue, August 22, 2006 00:37
>To: bluez-users@lists.sourceforge.net
>--------------------------------------------------------------------------
>
>Ok, I am getting further. I have the snd_bt_sco module loaded.
>
>Doing a btsco 00:0D:44:4F:37:72 gives me
>
>Error: Failed to connect to SDP server: Function not implemented
>Assuming channel 2
>
>Can't connect RFCOMM channel: Resource temporarily unavailable
>
>I'm a newbie at this bluetooth stuff. I'm not sure if i'm supposed to start
>the rfcomm program or what parameters i should send.
>
>My config files are listed in the preceding emails.
>
>Thank you for the help so far,
>
>Bearcat M. Sandor
>On Monday 21 August 2006 21:31 in an email titled "Re: [Bluez-users]
> Logitech Traveler Headset. Progress but not there yet. Advice wanted."
> Bearcat M.
>
>Sandor wrote:
>>Brad,
>>Thank you. That was immensely helpful. I have btsco installed. I have
>
>followed the steps at the link you provided.
>
>>I change to root user.
>>After the "hciconfig hci0 voice 0x0060" is given my hciconfig looks like:
>
>hci0: Type: USB
>
>> BD Address: 00:07:61:1C:9F:D3 ACL MTU: 192:8 SCO MTU: 64:8 UP
>
>RUNNING PSCAN
>
>> RX bytes:3908436 acl:279025 sco:0 events:1181 errors:0
>> TX bytes:1936 acl:16 sco:0 commands:192 errors:0
>> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
>> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>> Link policy: RSWITCH HOLD SNIFF PARK
>> Link mode: SLAVE ACCEPT
>> Name: 'BlueZ (0)'
>> Class: 0x3e0100
>> Service Classes: Networking, Rendering, Capturing, Object
>
>Transfer,
>
>>Audio
>> Device Class: Computer, Uncategorized
>> HCI Ver: 1.1 (0x1) HCI Rev: 0x34e LMP Ver: 1.1 (0x1) LMP Subver:
>> 0x34e Manufacturer: Cambridge Silicon Radio (10)
>>Then i issue the "btsco 00:0D:44:4F:37:72" and i get:
>>Error: hwdep next device (hw:0): Operation not permitted
>>Error: hwdep next device (hw:1): Operation not permitted
>>Error: control open (hw:2): No such device
>>Error: Can't find device. Bail
>>Bearcat M. Sandor
>>On Monday 21 August 2006 20:35 in an email titled "Re: [Bluez-users]
>> Logitech Traveler Headset. Progress but not there yet. Advice wanted."
>
>Brad
>
>> Midgley
>>
>>wrote:
>>>Bearcat
>>>
>>>> on button to get it to start paring. Then i issue a "hidd --connect
>
>00:0D:44:4F:37:72" After awhile the headset stops blinking and "Can't
>get
>
>>>> device information: Function not implemented" is returned for the hidd
>
>--connect.
>
>>>hidd is for connecting the keyboard/mouse/etc but not the headset. Check
>
>with the docs at bluetooth-alsa.sf.net.
>
>>>Brad
>>>-------------------------------------------------------------------------
>
>Using Tomcat but need to do more? Need to support web services,
>security?
>
>>>Get stuff done quickly with pre-integrated technology to make your job
>>> easier Download IBM WebSphere Application Server v.1.0.1 based on
>
>Apache
>
>>> Geronimo
>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>
>_______________________________________________
>
>>>Bluez-users mailing list
>>>Bluez-users@lists.sourceforge.net
>>>https://lists.sourceforge.net/lists/listinfo/bluez-users
--
Bearcat M. Sandor
Bearcat@feline-soul.com
Jabber: bearcat@jabber.feline-soul.net
ICQ: 6628727
MSN: bearcatsandor@hotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-24 4:05 ` [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked Bearcat M. Sandor
@ 2006-08-24 4:34 ` Brad Midgley
2006-08-24 5:00 ` Bearcat M. Sandor
0 siblings, 1 reply; 9+ messages in thread
From: Brad Midgley @ 2006-08-24 4:34 UTC (permalink / raw)
To: Linux, BlueZ users
Bearcat
> It seems like this is the same old problem that has been plaguing me for a
> month now. I need to feed this headset a pin of 0000 and i am NEVER asked for
> a pin no matter what i put into the config file.
we've had this problem from time to time... the only thing that
sometimes works is to reset the pairing. some suggestions are listed at
the end of bluetooth-alsa.sf.net.
brad
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-24 4:34 ` Brad Midgley
@ 2006-08-24 5:00 ` Bearcat M. Sandor
2006-08-24 7:43 ` Brad Midgley
2006-08-24 12:18 ` John McDougald
0 siblings, 2 replies; 9+ messages in thread
From: Bearcat M. Sandor @ 2006-08-24 5:00 UTC (permalink / raw)
To: bluez-users; +Cc: Brad Midgley
Brad,
I've done so. That was the page i was following.
The page specifies the following fixes:
If you can't pair or connect with the headset, did you pair it with another
device? *There is no other device*
Did it help to reset the pairing by removing /etc/bluetooth/link_key
or /var/lib/bluetooth/[dongleaddr]/linkkeys or by putting the headset in pair
mode? *These files have never existed and it has never been paired. How do i
put it in paired mode?*
You may have to redo this often if you try to dual-boot windows or if you use
the same dongle on another computer. *Never been done*
Be sure to set "auth disable" and "encrypt disable"
in /etc/bluetooth/hcid.conf. *Done*
This is a headset that i ordered from Ebay. A white box. Do i *know* that the
pin is still the default? No. However i should still be asked for the pin at
some point.
Again, when i issue a btsco 00:0D:44:4F:37:72 i get:
Error: Failed to connect to SDP server: Permission denied
Assuming channel 2
Can't connect RFCOMM channel: Permission denied
Thank you for the help. Any other suggestions? I have to get this working.
Bearcat
On Wednesday 23 August 2006 22:34 in an email titled "Re: [Bluez-users]
Logitech Traveler Headset. pin never seen and i am never asked." Brad Midgley
wrote:
>Bearcat
>
>> It seems like this is the same old problem that has been plaguing me for a
>> month now. I need to feed this headset a pin of 0000 and i am NEVER asked
>> for a pin no matter what i put into the config file.
>
>we've had this problem from time to time... the only thing that
>sometimes works is to reset the pairing. some suggestions are listed at
>the end of bluetooth-alsa.sf.net.
>
>brad
>
>
>
>
>-------------------------------------------------------------------------
>Using Tomcat but need to do more? Need to support web services, security?
>Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
>Bluez-users mailing list
>Bluez-users@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/bluez-users
--
Bearcat M. Sandor
Bearcat@feline-soul.com
Jabber: bearcat@jabber.feline-soul.net
ICQ: 6628727
MSN: bearcatsandor@hotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-24 5:00 ` Bearcat M. Sandor
@ 2006-08-24 7:43 ` Brad Midgley
2006-08-24 7:59 ` Bearcat M. Sandor
2006-08-24 12:18 ` John McDougald
1 sibling, 1 reply; 9+ messages in thread
From: Brad Midgley @ 2006-08-24 7:43 UTC (permalink / raw)
To: Linux, bluez-users
Bearcat
> mode? *These files have never existed and it has never been paired. How do i
> put it in paired mode?*
most headsets go into pairing mode by holding down the power until the
led flashes red/blue. check your manual if you can find one.
> This is a headset that i ordered from Ebay. A white box. Do i *know* that the
> pin is still the default? No. However i should still be asked for the pin at
> some point.
>
> Again, when i issue a btsco 00:0D:44:4F:37:72 i get:
> Error: Failed to connect to SDP server: Permission denied
> Assuming channel 2
>
> Can't connect RFCOMM channel: Permission denied
hmm. yeah this one has come up from time to time. the headset *should*
respond to sdp even when not in pairing mode. sdp shouldn't require the
pin code either. so it's going wrong even before you can start to pair
with it. did you get the address in the first place with hcitool scan?
Brad
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-24 7:43 ` Brad Midgley
@ 2006-08-24 7:59 ` Bearcat M. Sandor
0 siblings, 0 replies; 9+ messages in thread
From: Bearcat M. Sandor @ 2006-08-24 7:59 UTC (permalink / raw)
To: Brad Midgley; +Cc: bluez-users
On Thursday 24 August 2006 01:43 in an email titled "Re: [Bluez-users]
Logitech Traveler Headset. pin never seen and i am never asked." Brad Midgley
wrote:
>Bearcat
>
>most headsets go into pairing mode by holding down the power until the
>led flashes red/blue. check your manual if you can find one.
>
I misunderstood the statement. I put it in paring mode all the time by holding
the power button down till it flashes red/blue. However it has never been
successfully paired that i know of.
>hmm. yeah this one has come up from time to time. the headset *should*
>respond to sdp even when not in pairing mode. sdp shouldn't require the
>pin code either. so it's going wrong even before you can start to pair
>with it. did you get the address in the first place with hcitool scan?
Yes, with hcitool scan. And it is found. Kdebluetooth even pops up a dialog
telling me about it.
I just can't get it to pair/operate.
If only i could get a "0000" to it i think it would work, but it doesn't want
to send or give me the option to enter a pin.
>Brad
--
Bearcat M. Sandor
Bearcat@feline-soul.com
Jabber: bearcat@jabber.feline-soul.net
ICQ: 6628727
MSN: bearcatsandor@hotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-24 5:00 ` Bearcat M. Sandor
2006-08-24 7:43 ` Brad Midgley
@ 2006-08-24 12:18 ` John McDougald
2006-08-25 22:20 ` Bearcat M. Sandor
1 sibling, 1 reply; 9+ messages in thread
From: John McDougald @ 2006-08-24 12:18 UTC (permalink / raw)
To: Linux, BlueZ users
I have the same problem. It appears that the latest version of hcid no
longer recognizes the pin_helper definition inside the hcid.conf file.
As I am also running Debian (unstable) I hoped that the bluez-pin
package would be "linked" to the hcitool cc xx:xx:xx:xx:xx:xx
application and would pop up a window allowing me to enter a password
during the pairing phase. However, there is a dependancy problem and
the bluez-pin package cannot be installed. I crammed it in (using dpkg
-i --force-all) and the bluez-pin package installed and the hcid
application showed that a pin application was registered, but, when I
tried to pair I was never presented with a dialog box requesting a pin
and the pairing failed.
I should mention that this logitech headset (HS04 V01) pairs with this
notebook when I boot into windowsXP so there is no hardware problem.
I am hoping that I am just an "apt-get update; apt-get dist-upgrade"
away from a working bluetooth headset }:-) as the "break" with the
pin_helper option in hcid.conf must have broken a lot of working
bluetooth configurations.
John
On Wed, 2006-08-23 at 23:00 -0600, Bearcat M. Sandor wrote:
> Brad,
> I've done so. That was the page i was following.
> The page specifies the following fixes:
> If you can't pair or connect with the headset, did you pair it with another
> device? *There is no other device*
> Did it help to reset the pairing by removing /etc/bluetooth/link_key
> or /var/lib/bluetooth/[dongleaddr]/linkkeys or by putting the headset in pair
> mode? *These files have never existed and it has never been paired. How do i
> put it in paired mode?*
>
> You may have to redo this often if you try to dual-boot windows or if you use
> the same dongle on another computer. *Never been done*
> Be sure to set "auth disable" and "encrypt disable"
> in /etc/bluetooth/hcid.conf. *Done*
>
> This is a headset that i ordered from Ebay. A white box. Do i *know* that the
> pin is still the default? No. However i should still be asked for the pin at
> some point.
>
> Again, when i issue a btsco 00:0D:44:4F:37:72 i get:
> Error: Failed to connect to SDP server: Permission denied
> Assuming channel 2
>
> Can't connect RFCOMM channel: Permission denied
>
>
> Thank you for the help. Any other suggestions? I have to get this working.
>
> Bearcat
>
> On Wednesday 23 August 2006 22:34 in an email titled "Re: [Bluez-users]
> Logitech Traveler Headset. pin never seen and i am never asked." Brad Midgley
> wrote:
> >Bearcat
> >
> >> It seems like this is the same old problem that has been plaguing me for a
> >> month now. I need to feed this headset a pin of 0000 and i am NEVER asked
> >> for a pin no matter what i put into the config file.
> >
> >we've had this problem from time to time... the only thing that
> >sometimes works is to reset the pairing. some suggestions are listed at
> >the end of bluetooth-alsa.sf.net.
> >
> >brad
> >
> >
> >
> >
> >-------------------------------------------------------------------------
> >Using Tomcat but need to do more? Need to support web services, security?
> >Get stuff done quickly with pre-integrated technology to make your job
> > easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> >Bluez-users mailing list
> >Bluez-users@lists.sourceforge.net
> >https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
2006-08-24 12:18 ` John McDougald
@ 2006-08-25 22:20 ` Bearcat M. Sandor
0 siblings, 0 replies; 9+ messages in thread
From: Bearcat M. Sandor @ 2006-08-25 22:20 UTC (permalink / raw)
To: jmcdougald; +Cc: BlueZ users
I couldn't get it work with the latest or the previous version either.
Is this a bug in the program or a misconfigured set up?
If it is a bug, has it been varified as such and if so is it being fixed?
I *really* need to get this working.
Bearcat M. Sandor
> I have the same problem. It appears that the latest version of hcid no
> longer recognizes the pin_helper definition inside the hcid.conf file.
> As I am also running Debian (unstable) I hoped that the bluez-pin
> package would be "linked" to the hcitool cc xx:xx:xx:xx:xx:xx
> application and would pop up a window allowing me to enter a password
> during the pairing phase. However, there is a dependancy problem and
> the bluez-pin package cannot be installed. I crammed it in (using dpkg
> -i --force-all) and the bluez-pin package installed and the hcid
> application showed that a pin application was registered, but, when I
> tried to pair I was never presented with a dialog box requesting a pin
> and the pairing failed.
>
> I should mention that this logitech headset (HS04 V01) pairs with this
> notebook when I boot into windowsXP so there is no hardware problem.
>
> I am hoping that I am just an "apt-get update; apt-get dist-upgrade"
> away from a working bluetooth headset }:-) as the "break" with the
> pin_helper option in hcid.conf must have broken a lot of working
> bluetooth configurations.
>
> John
>
> On Wed, 2006-08-23 at 23:00 -0600, Bearcat M. Sandor wrote:
>> Brad,
>> I've done so. That was the page i was following.
>> The page specifies the following fixes:
>> If you can't pair or connect with the headset, did you pair it with
>> another
>> device? *There is no other device*
>> Did it help to reset the pairing by removing /etc/bluetooth/link_key
>> or /var/lib/bluetooth/[dongleaddr]/linkkeys or by putting the headset in
>> pair
>> mode? *These files have never existed and it has never been paired. How
>> do i
>> put it in paired mode?*
>>
>> You may have to redo this often if you try to dual-boot windows or if
>> you use
>> the same dongle on another computer. *Never been done*
>> Be sure to set "auth disable" and "encrypt disable"
>> in /etc/bluetooth/hcid.conf. *Done*
>>
>> This is a headset that i ordered from Ebay. A white box. Do i *know*
>> that the
>> pin is still the default? No. However i should still be asked for the
>> pin at
>> some point.
>>
>> Again, when i issue a btsco 00:0D:44:4F:37:72 i get:
>> Error: Failed to connect to SDP server: Permission denied
>> Assuming channel 2
>>
>> Can't connect RFCOMM channel: Permission denied
>>
>>
>> Thank you for the help. Any other suggestions? I have to get this
>> working.
>>
>> Bearcat
>>
>> On Wednesday 23 August 2006 22:34 in an email titled "Re: [Bluez-users]
>> Logitech Traveler Headset. pin never seen and i am never asked." Brad
>> Midgley
>> wrote:
>> >Bearcat
>> >
>> >> It seems like this is the same old problem that has been plaguing me
>> for a
>> >> month now. I need to feed this headset a pin of 0000 and i am NEVER
>> asked
>> >> for a pin no matter what i put into the config file.
>> >
>> >we've had this problem from time to time... the only thing that
>> >sometimes works is to reset the pairing. some suggestions are listed at
>> >the end of bluetooth-alsa.sf.net.
>> >
>> >brad
>> >
>> >
>> >
>> >
>> >-------------------------------------------------------------------------
>> >Using Tomcat but need to do more? Need to support web services,
>> security?
>> >Get stuff done quickly with pre-integrated technology to make your job
>> > easier Download IBM WebSphere Application Server v.1.0.1 based on
>> Apache
>> > Geronimo
>> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> > _______________________________________________
>> >Bluez-users mailing list
>> >Bluez-users@lists.sourceforge.net
>> >https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked.
@ 2006-08-25 22:22 Bearcat M. Sandor
0 siblings, 0 replies; 9+ messages in thread
From: Bearcat M. Sandor @ 2006-08-25 22:22 UTC (permalink / raw)
To: jmcdougald; +Cc: BlueZ users
I couldn't get it work with the latest or the previous version either.
Is this a bug in the program or a misconfigured set up?
If it is a bug, has it been varified as such and if so is it being fixed?
I *really* need to get this working.
Bearcat M. Sandor
> I have the same problem. It appears that the latest version of hcid no
longer recognizes the pin_helper definition inside the hcid.conf file.
As I am also running Debian (unstable) I hoped that the bluez-pin
package would be "linked" to the hcitool cc xx:xx:xx:xx:xx:xx
> application and would pop up a window allowing me to enter a password
during the pairing phase. However, there is a dependancy problem and
the bluez-pin package cannot be installed. I crammed it in (using dpkg
-i --force-all) and the bluez-pin package installed and the hcid
application showed that a pin application was registered, but, when I
tried to pair I was never presented with a dialog box requesting a pin
and the pairing failed.
>
> I should mention that this logitech headset (HS04 V01) pairs with this
notebook when I boot into windowsXP so there is no hardware problem.
>
> I am hoping that I am just an "apt-get update; apt-get dist-upgrade"
away from a working bluetooth headset }:-) as the "break" with the
pin_helper option in hcid.conf must have broken a lot of working
bluetooth configurations.
>
> John
>
> On Wed, 2006-08-23 at 23:00 -0600, Bearcat M. Sandor wrote:
>> Brad,
>> I've done so. That was the page i was following.
>> The page specifies the following fixes:
>> If you can't pair or connect with the headset, did you pair it with
>> another
>> device? *There is no other device*
>> Did it help to reset the pairing by removing /etc/bluetooth/link_key or
/var/lib/bluetooth/[dongleaddr]/linkkeys or by putting the headset in
pair
>> mode? *These files have never existed and it has never been paired.
How do i
>> put it in paired mode?*
>>
>> You may have to redo this often if you try to dual-boot windows or if
you use
>> the same dongle on another computer. *Never been done*
>> Be sure to set "auth disable" and "encrypt disable"
>> in /etc/bluetooth/hcid.conf. *Done*
>>
>> This is a headset that i ordered from Ebay. A white box. Do i *know*
that the
>> pin is still the default? No. However i should still be asked for the
pin at
>> some point.
>>
>> Again, when i issue a btsco 00:0D:44:4F:37:72 i get:
>> Error: Failed to connect to SDP server: Permission denied
>> Assuming channel 2
>>
>> Can't connect RFCOMM channel: Permission denied
>>
>>
>> Thank you for the help. Any other suggestions? I have to get this working.
>>
>> Bearcat
>>
>> On Wednesday 23 August 2006 22:34 in an email titled "Re: [Bluez-users]
Logitech Traveler Headset. pin never seen and i am never asked." Brad
Midgley
>> wrote:
>> >Bearcat
>> >
>> >> It seems like this is the same old problem that has been plaguing me
>> for a
>> >> month now. I need to feed this headset a pin of 0000 and i am NEVER
>> asked
>> >> for a pin no matter what i put into the config file.
>> >
>> >we've had this problem from time to time... the only thing that
sometimes works is to reset the pairing. some suggestions are listed
at the end of bluetooth-alsa.sf.net.
>> >
>> >brad
>> >
>> >
>> >
>> >
>> >-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services,
>> security?
>> >Get stuff done quickly with pre-integrated technology to make your job
>> > easier Download IBM WebSphere Application Server v.1.0.1 based on
>> Apache
>> > Geronimo
>> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
>> >Bluez-users mailing list
>> >Bluez-users@lists.sourceforge.net
>> >https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-08-25 22:22 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-08-23 22:25 [Bluez-users] Logitech Traveler Headset. Progress but not there yet. Advice wanted.] Bearcat M. Sandor
2006-08-24 4:05 ` [Bluez-users] Logitech Traveler Headset. pin never seen and i am never asked Bearcat M. Sandor
2006-08-24 4:34 ` Brad Midgley
2006-08-24 5:00 ` Bearcat M. Sandor
2006-08-24 7:43 ` Brad Midgley
2006-08-24 7:59 ` Bearcat M. Sandor
2006-08-24 12:18 ` John McDougald
2006-08-25 22:20 ` Bearcat M. Sandor
2006-08-25 22:22 Bearcat M. Sandor
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.