On June 10, 2021 16:09:49 Jason Ekstrand wrote: > Modern userspace APIs like Vulkan are built on an explicit > synchronization model. This doesn't always play nicely with the > implicit synchronization used in the kernel and assumed by X11 and > Wayland. The client -> compositor half of the synchronization isn't too > bad, at least on intel, because we can control whether or not i915 > synchronizes on the buffer and whether or not it's considered written. > > The harder part is the compositor -> client synchronization when we get > the buffer back from the compositor. We're required to be able to > provide the client with a VkSemaphore and VkFence representing the point > in time where the window system (compositor and/or display) finished > using the buffer. With current APIs, it's very hard to do this in such > a way that we don't get confused by the Vulkan driver's access of the > buffer. In particular, once we tell the kernel that we're rendering to > the buffer again, any CPU waits on the buffer or GPU dependencies will > wait on some of the client rendering and not just the compositor. > > This new IOCTL solves this problem by allowing us to get a snapshot of > the implicit synchronization state of a given dma-buf in the form of a > sync file. It's effectively the same as a poll() or I915_GEM_WAIT only, > instead of CPU waiting directly, it encapsulates the wait operation, at > the current moment in time, in a sync_file so we can check/wait on it > later. As long as the Vulkan driver does the sync_file export from the > dma-buf before we re-introduce it for rendering, it will only contain > fences from the compositor or display. This allows to accurately turn > it into a VkFence or VkSemaphore without any over-synchronization. FYI, the Mesa MR for using this ioctl (the export one) have now been reviewed. As far as I'm concerned, we're ready to land patches 1-4 from this series. --Jason > By making this an ioctl on the dma-buf itself, it allows this new > functionality to be used in an entirely driver-agnostic way without > having access to a DRM fd. This makes it ideal for use in driver-generic > code in Mesa or in a client such as a compositor where the DRM fd may be > hard to reach. > > v2 (Jason Ekstrand): > - Use a wrapper dma_fence_array of all fences including the new one > when importing an exclusive fence. > > v3 (Jason Ekstrand): > - Lock around setting shared fences as well as exclusive > - Mark SIGNAL_SYNC_FILE as a read-write ioctl. > - Initialize ret to 0 in dma_buf_wait_sync_file > > v4 (Jason Ekstrand): > - Use the new dma_resv_get_singleton helper > > v5 (Jason Ekstrand): > - Rename the IOCTLs to import/export rather than wait/signal > - Drop the WRITE flag and always get/set the exclusive fence > > v6 (Jason Ekstrand): > - Drop the sync_file import as it was all-around sketchy and not nearly > as useful as import. > - Re-introduce READ/WRITE flag support for export > - Rework the commit message > > v7 (Jason Ekstrand): > - Require at least one sync flag > - Fix a refcounting bug: dma_resv_get_excl() doesn't take a reference > - Use _rcu helpers since we're accessing the dma_resv read-only > > v8 (Jason Ekstrand): > - Return -ENOMEM if the sync_file_create fails > - Predicate support on IS_ENABLED(CONFIG_SYNC_FILE) > > v9 (Jason Ekstrand): > - Add documentation for the new ioctl > > v10 (Jason Ekstrand): > - Go back to dma_buf_sync_file as the ioctl struct name > > v11 (Daniel Vetter): > - Go back to dma_buf_export_sync_file as the ioctl struct name > - Better kerneldoc describing what the read/write flags do > > v12 (Christian König): > - Document why we chose to make it an ioctl on dma-buf > > Signed-off-by: Jason Ekstrand > Acked-by: Simon Ser > Acked-by: Christian König > Reviewed-by: Daniel Vetter > Cc: Sumit Semwal > Cc: Maarten Lankhorst > --- > drivers/dma-buf/dma-buf.c | 67 ++++++++++++++++++++++++++++++++++++ > include/uapi/linux/dma-buf.h | 35 +++++++++++++++++++ > 2 files changed, 102 insertions(+) > > diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c > index 511fe0d217a08..41b14b53cdda3 100644 > --- a/drivers/dma-buf/dma-buf.c > +++ b/drivers/dma-buf/dma-buf.c > @@ -20,6 +20,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -191,6 +192,9 @@ static loff_t dma_buf_llseek(struct file *file, loff_t > offset, int whence) > * Note that this only signals the completion of the respective fences, i.e. the > * DMA transfers are complete. Cache flushing and any other necessary > * preparations before CPU access can begin still need to happen. > + * > + * As an alternative to poll(), the set of fences on DMA buffer can be > + * exported as a &sync_file using &dma_buf_sync_file_export. > */ > > static void dma_buf_poll_cb(struct dma_fence *fence, struct dma_fence_cb *cb) > @@ -362,6 +366,64 @@ static long dma_buf_set_name(struct dma_buf *dmabuf, > const char __user *buf) > return ret; > } > > +#if IS_ENABLED(CONFIG_SYNC_FILE) > +static long dma_buf_export_sync_file(struct dma_buf *dmabuf, > + void __user *user_data) > +{ > + struct dma_buf_export_sync_file arg; > + struct dma_fence *fence = NULL; > + struct sync_file *sync_file; > + int fd, ret; > + > + if (copy_from_user(&arg, user_data, sizeof(arg))) > + return -EFAULT; > + > + if (arg.flags & ~DMA_BUF_SYNC_RW) > + return -EINVAL; > + > + if ((arg.flags & DMA_BUF_SYNC_RW) == 0) > + return -EINVAL; > + > + fd = get_unused_fd_flags(O_CLOEXEC); > + if (fd < 0) > + return fd; > + > + if (arg.flags & DMA_BUF_SYNC_WRITE) { > + fence = dma_resv_get_singleton(dmabuf->resv); > + if (IS_ERR(fence)) { > + ret = PTR_ERR(fence); > + goto err_put_fd; > + } > + } else if (arg.flags & DMA_BUF_SYNC_READ) { > + fence = dma_resv_get_excl_unlocked(dmabuf->resv); > + } > + > + if (!fence) > + fence = dma_fence_get_stub(); > + > + sync_file = sync_file_create(fence); > + > + dma_fence_put(fence); > + > + if (!sync_file) { > + ret = -ENOMEM; > + goto err_put_fd; > + } > + > + fd_install(fd, sync_file->file); > + > + arg.fd = fd; > + if (copy_to_user(user_data, &arg, sizeof(arg))) > + return -EFAULT; > + > + return 0; > + > +err_put_fd: > + put_unused_fd(fd); > + return ret; > +} > +#endif > + > static long dma_buf_ioctl(struct file *file, > unsigned int cmd, unsigned long arg) > { > @@ -405,6 +467,11 @@ static long dma_buf_ioctl(struct file *file, > case DMA_BUF_SET_NAME_B: > return dma_buf_set_name(dmabuf, (const char __user *)arg); > > +#if IS_ENABLED(CONFIG_SYNC_FILE) > + case DMA_BUF_IOCTL_EXPORT_SYNC_FILE: > + return dma_buf_export_sync_file(dmabuf, (void __user *)arg); > +#endif > + > default: > return -ENOTTY; > } > diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h > index 1c131002fe1ee..82f12a4640403 100644 > --- a/include/uapi/linux/dma-buf.h > +++ b/include/uapi/linux/dma-buf.h > @@ -81,6 +81,40 @@ struct dma_buf_sync { > > #define DMA_BUF_NAME_LEN 32 > > +/** > + * struct dma_buf_export_sync_file - Get a sync_file from a dma-buf > + * > + * Userspace can perform a DMA_BUF_IOCTL_EXPORT_SYNC_FILE to retrieve the > + * current set of fences on a dma-buf file descriptor as a sync_file. CPU > + * waits via poll() or other driver-specific mechanisms typically wait on > + * whatever fences are on the dma-buf at the time the wait begins. This > + * is similar except that it takes a snapshot of the current fences on the > + * dma-buf for waiting later instead of waiting immediately. This is > + * useful for modern graphics APIs such as Vulkan which assume an explicit > + * synchronization model but still need to inter-operate with dma-buf. > + */ > +struct dma_buf_export_sync_file { > + /** > + * @flags: Read/write flags > + * > + * Must be DMA_BUF_SYNC_READ, DMA_BUF_SYNC_WRITE, or both. > + * > + * If DMA_BUF_SYNC_READ is set and DMA_BUF_SYNC_WRITE is not set, > + * the returned sync file waits on any writers of the dma-buf to > + * complete. Waiting on the returned sync file is equivalent to > + * poll() with POLLIN. > + * > + * If DMA_BUF_SYNC_WRITE is set, the returned sync file waits on > + * any users of the dma-buf (read or write) to complete. Waiting > + * on the returned sync file is equivalent to poll() with POLLOUT. > + * If both DMA_BUF_SYNC_WRITE and DMA_BUF_SYNC_READ are set, this > + * is equivalent to just DMA_BUF_SYNC_WRITE. > + */ > + __u32 flags; > + /** @fd: Returned sync file descriptor */ > + __s32 fd; > +}; > + > #define DMA_BUF_BASE 'b' > #define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync) > > @@ -90,5 +124,6 @@ struct dma_buf_sync { > #define DMA_BUF_SET_NAME _IOW(DMA_BUF_BASE, 1, const char *) > #define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, u32) > #define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, u64) > +#define DMA_BUF_IOCTL_EXPORT_SYNC_FILE _IOWR(DMA_BUF_BASE, 2, struct > dma_buf_export_sync_file) > > #endif > -- > 2.31.1