From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5
Date: Mon, 7 May 2018 13:47:43 +0200 [thread overview]
Message-ID: <17d101f8-fafe-0cb2-bcc4-33f13ceff7b1@denx.de> (raw)
In-Reply-To: <20180507073351.30582-7-jagan@amarulasolutions.com>
On 05/07/2018 09:33 AM, Jagan Teki wrote:
> Add OTG device clkgate and reset for H3/H5 through driver_data.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Why don't you implement a clock driver for this SoC instead ?
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2018-05-07 11:47 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-07 7:33 [U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 01/35] usb: sunxi: Simplify ccm reg base code Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 02/35] musb: sunxi: Add proper macros instead of numericals Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 03/35] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 04/35] musb: sunxi: Add fifo config Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 05/35] sunxi: clock: Fix clock gating for H3/H5/A64 Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
2018-05-07 11:47 ` Marek Vasut [this message]
2018-05-07 14:52 ` Maxime Ripard
2018-05-07 15:32 ` Marek Vasut
2018-05-07 20:11 ` Maxime Ripard
2018-05-07 20:55 ` Marek Vasut
2018-05-11 21:29 ` Maxime Ripard
2018-05-12 12:12 ` Marek Vasut
2018-05-14 9:05 ` Maxime Ripard
2018-05-14 9:13 ` Marek Vasut
2018-05-18 11:51 ` Maxime Ripard
2018-05-18 11:55 ` Marek Vasut
2018-05-18 15:32 ` Maxime Ripard
2018-05-08 6:26 ` Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 07/35] musb: sunxi: Use BIT instead of numerical shift Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 08/35] sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 09/35] musb: sunxi: Add support for H3/H5A64 Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 10/35] phy: Add Allwinner A64 USB PHY driver Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 11/35] phy: sun4i-usb: Add id_detect and vbus_detect ops Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 12/35] phy: sun4i-usb: Add H3/H5 PHY config Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 13/35] phy: sun4i-usb: Add V3S " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 14/35] phy: sun4i-usb: Add A83T USB " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 15/35] phy: sun4i-usb: Add A10/A13/A20 " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 16/35] phy: sun4i-usb: Add A31 " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 17/35] phy: sun4i-usb: Add A33 USB " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 18/35] phy: sun4i-usb: Add A23 " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings Jagan Teki
2018-05-07 11:49 ` Marek Vasut
2018-05-07 7:33 ` [U-Boot] [PATCH v7 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 22/35] usb: sunxi: Switch to use generic-phy Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 23/35] sunxi: Drop legacy usb_phy.c Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg " Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux Jagan Teki
2018-05-07 7:33 ` [U-Boot] [PATCH v7 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode Jagan Teki
2018-05-08 6:34 ` [U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-05-15 8:46 ` Jun Nie
2018-05-15 12:49 ` Jagan Teki
2018-05-22 12:40 ` [U-Boot] [linux-sunxi] " Jagan Teki
2018-05-22 12:44 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17d101f8-fafe-0cb2-bcc4-33f13ceff7b1@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.