[PATCH v5 0/6] arm64: dts: Update IOT2050 boards

[PATCH v5 0/6] arm64: dts: Update IOT2050 boards

[Jan Kiszka]

This enhances the DTs for the IOT2050, primarily by added support for
upcoming Production Generation 2 (PG2) and by ordering the MMC devices
consistently across variants.

Changes in v5:
 - fix usb0 node (for true USB 3.0 support)
 - added reviewed/acked tags

Changes in v4:
 - update dtbinding with new board names
 - fix review comments on commit messages and style

Changes in v3:
 - move mmc alias back into board DTs
 - add patch to enable R5F cores for rproc

Changes in v2:
 - move mmc alias to SoC level
 - split up into PG2 preparation and addition patch
 - add link to product homepage

Jan

Jan Kiszka (6):
  arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices
  arm64: dts: ti: iot2050: Disable SR2.0-only PRUs
  arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F
    cores
  dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards
  arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards
  arm64: dts: ti: iot2050: Add support for product generation 2 boards

 .../devicetree/bindings/arm/ti/k3.yaml        |  2 +
 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-am65-iot2050-common-pg1.dtsi    | 46 +++++++++++++++
 .../dts/ti/k3-am65-iot2050-common-pg2.dtsi    | 51 +++++++++++++++++
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 39 +++++++++----
 ...ts => k3-am6528-iot2050-basic-common.dtsi} | 12 +---
 .../dts/ti/k3-am6528-iot2050-basic-pg2.dts    | 24 ++++++++
 .../boot/dts/ti/k3-am6528-iot2050-basic.dts   | 56 +++----------------
 ...=> k3-am6548-iot2050-advanced-common.dtsi} |  8 +--
 .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts | 29 ++++++++++
 .../dts/ti/k3-am6548-iot2050-advanced.dts     | 50 +++--------------
 11 files changed, 201 insertions(+), 118 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
 copy arch/arm64/boot/dts/ti/{k3-am6528-iot2050-basic.dts => k3-am6528-iot2050-basic-common.dtsi} (80%)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
 copy arch/arm64/boot/dts/ti/{k3-am6548-iot2050-advanced.dts => k3-am6548-iot2050-advanced-common.dtsi} (85%)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts

--
2.31.1

[PATCH v5 0/6] arm64: dts: Update IOT2050 boards

[Jan Kiszka]

This enhances the DTs for the IOT2050, primarily by added support for
upcoming Production Generation 2 (PG2) and by ordering the MMC devices
consistently across variants.

Changes in v5:
 - fix usb0 node (for true USB 3.0 support)
 - added reviewed/acked tags

Changes in v4:
 - update dtbinding with new board names
 - fix review comments on commit messages and style

Changes in v3:
 - move mmc alias back into board DTs
 - add patch to enable R5F cores for rproc

Changes in v2:
 - move mmc alias to SoC level
 - split up into PG2 preparation and addition patch
 - add link to product homepage

Jan

Jan Kiszka (6):
  arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices
  arm64: dts: ti: iot2050: Disable SR2.0-only PRUs
  arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F
    cores
  dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards
  arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards
  arm64: dts: ti: iot2050: Add support for product generation 2 boards

 .../devicetree/bindings/arm/ti/k3.yaml        |  2 +
 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-am65-iot2050-common-pg1.dtsi    | 46 +++++++++++++++
 .../dts/ti/k3-am65-iot2050-common-pg2.dtsi    | 51 +++++++++++++++++
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 39 +++++++++----
 ...ts => k3-am6528-iot2050-basic-common.dtsi} | 12 +---
 .../dts/ti/k3-am6528-iot2050-basic-pg2.dts    | 24 ++++++++
 .../boot/dts/ti/k3-am6528-iot2050-basic.dts   | 56 +++----------------
 ...=> k3-am6548-iot2050-advanced-common.dtsi} |  8 +--
 .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts | 29 ++++++++++
 .../dts/ti/k3-am6548-iot2050-advanced.dts     | 50 +++--------------
 11 files changed, 201 insertions(+), 118 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
 copy arch/arm64/boot/dts/ti/{k3-am6528-iot2050-basic.dts => k3-am6528-iot2050-basic-common.dtsi} (80%)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
 copy arch/arm64/boot/dts/ti/{k3-am6548-iot2050-advanced.dts => k3-am6548-iot2050-advanced-common.dtsi} (85%)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts

--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/6] arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This ensures that the SD card will remain mmc0 across Basic and Advanced
devices, also avoiding surprises for users coming from the downstream
kernels.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 1008e9162ba2..6261ca8ee2d8 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -17,6 +17,8 @@
 / {
 	aliases {
 		spi0 = &mcu_spi0;
+		mmc0 = &sdhci1;
+		mmc1 = &sdhci0;
 	};

 	chosen {
--
2.31.1

[PATCH v5 1/6] arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This ensures that the SD card will remain mmc0 across Basic and Advanced
devices, also avoiding surprises for users coming from the downstream
kernels.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 1008e9162ba2..6261ca8ee2d8 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -17,6 +17,8 @@
 / {
 	aliases {
 		spi0 = &mcu_spi0;
+		mmc0 = &sdhci1;
+		mmc1 = &sdhci0;
 	};

 	chosen {
--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/6] arm64: dts: ti: iot2050: Disable SR2.0-only PRUs

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
---
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 6261ca8ee2d8..58c8e64d5885 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -716,3 +716,27 @@ &icssg1_mdio {
 &icssg2_mdio {
 	status = "disabled";
 };
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
--
2.31.1

[PATCH v5 2/6] arm64: dts: ti: iot2050: Disable SR2.0-only PRUs

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
---
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 6261ca8ee2d8..58c8e64d5885 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -716,3 +716,27 @@ &icssg1_mdio {
 &icssg2_mdio {
 	status = "disabled";
 };
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/6] arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Analogously to the am654-base-board, configure the mailboxes for the two
R5F cores, add them and the already existing memory carve-outs to the
related MCU nodes. Allows to load applications under Linux onto the
cores, e.g. the RTI watchdog firmware.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
---
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 26 +++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 58c8e64d5885..b29537088289 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -658,11 +658,21 @@ &pcie1_ep {
 };

 &mailbox0_cluster0 {
-	status = "disabled";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
 };

 &mailbox0_cluster1 {
-	status = "disabled";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
 };

 &mailbox0_cluster2 {
@@ -705,6 +715,18 @@ &mailbox0_cluster11 {
 	status = "disabled";
 };

+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+};
+
 &icssg0_mdio {
 	status = "disabled";
 };
--
2.31.1

[PATCH v5 3/6] arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Analogously to the am654-base-board, configure the mailboxes for the two
R5F cores, add them and the already existing memory carve-outs to the
related MCU nodes. Allows to load applications under Linux onto the
cores, e.g. the RTI watchdog firmware.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
---
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 26 +++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 58c8e64d5885..b29537088289 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -658,11 +658,21 @@ &pcie1_ep {
 };

 &mailbox0_cluster0 {
-	status = "disabled";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
 };

 &mailbox0_cluster1 {
-	status = "disabled";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
 };

 &mailbox0_cluster2 {
@@ -705,6 +715,18 @@ &mailbox0_cluster11 {
 	status = "disabled";
 };

+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+};
+
 &icssg0_mdio {
 	status = "disabled";
 };
--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 4/6] dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Product Generation 2 (PG2) boards are based on SR2.x SoCs and will be
released soon.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/ti/k3.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index c5aa362e4026..ccde4a0d7b46 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -24,7 +24,9 @@ properties:
           - enum:
               - ti,am654-evm
               - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
               - siemens,iot2050-advanced
+              - siemens,iot2050-advanced-pg2
           - const: ti,am654

       - description: K3 J721E SoC
--
2.31.1

[PATCH v5 4/6] dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Product Generation 2 (PG2) boards are based on SR2.x SoCs and will be
released soon.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/ti/k3.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index c5aa362e4026..ccde4a0d7b46 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -24,7 +24,9 @@ properties:
           - enum:
               - ti,am654-evm
               - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
               - siemens,iot2050-advanced
+              - siemens,iot2050-advanced-pg2
           - const: ti,am654

       - description: K3 J721E SoC
--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 5/6] arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

The current IOT2050 devices are Product Generation 1 (PG1), using SR1.0
AM65x silicon. Upcoming PG2 devices will use SR2.x SoCs and will
therefore need separate device trees. Prepare for that by factoring out
common bits that will be shared across both generations.

At this chance, drop a link to the product homepage to in the top-level
dts files. Also fix a typo in my email address in some headers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 .../dts/ti/k3-am65-iot2050-common-pg1.dtsi    | 46 +++++++++++++++
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 35 +-----------
 ...ts => k3-am6528-iot2050-basic-common.dtsi} | 12 +---
 .../boot/dts/ti/k3-am6528-iot2050-basic.dts   | 56 +++----------------
 ...=> k3-am6548-iot2050-advanced-common.dtsi} |  8 +--
 .../dts/ti/k3-am6548-iot2050-advanced.dts     | 50 +++--------------
 6 files changed, 67 insertions(+), 140 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
 copy arch/arm64/boot/dts/ti/{k3-am6528-iot2050-basic.dts => k3-am6528-iot2050-basic-common.dtsi} (80%)
 copy arch/arm64/boot/dts/ti/{k3-am6548-iot2050-advanced.dts => k3-am6548-iot2050-advanced-common.dtsi} (85%)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
new file mode 100644
index 000000000000..51f902fa35a7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1
+ */
+
+&dss {
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&sdhci1 {
+	no-1-8-v;
+};
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index b29537088289..65da226847f4 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -4,13 +4,11 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * Common bits of the IOT2050 Basic and Advanced variants
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */

-/dts-v1/;
-
 #include "k3-am654.dtsi"
 #include <dt-bindings/phy/phy.h>

@@ -557,7 +555,6 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 };

 &usb0 {
@@ -631,10 +628,6 @@ dpi_out: endpoint {
 	};
 };

-&serdes0 {
-	status = "disabled";
-};
-
 &pcie0_rc {
 	status = "disabled";
 };
@@ -738,27 +731,3 @@ &icssg1_mdio {
 &icssg2_mdio {
 	status = "disabled";
 };
-
-&tx_pru0_0 {
-	status = "disabled";
-};
-
-&tx_pru0_1 {
-	status = "disabled";
-};
-
-&tx_pru1_0 {
-	status = "disabled";
-};
-
-&tx_pru1_1 {
-	status = "disabled";
-};
-
-&tx_pru2_0 {
-	status = "disabled";
-};
-
-&tx_pru2_1 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
similarity index 80%
copy from arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
copy to arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 94bb5dd39122..4a9bf7d7c07d 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -4,20 +4,14 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6528-based (dual-core) IOT2050 Basic variant
- * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ * Common bits of the IOT2050 Basic variant, PG1 and PG2
  */

-/dts-v1/;
-
 #include "k3-am65-iot2050-common.dtsi"

 / {
-	compatible = "siemens,iot2050-basic", "ti,am654";
-	model = "SIMATIC IOT2050 Basic";
-
 	memory@80000000 {
 		device_type = "memory";
 		/* 1G RAM */
@@ -61,6 +55,6 @@ &main_uart0 {
 };

 &mcu_r5fss0 {
-	/* lock-step mode not supported on this board */
+	/* lock-step mode not supported on Basic boards */
 	ti,cluster-mode = <0>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
index 94bb5dd39122..87928ff28214 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
@@ -4,63 +4,21 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6528-based (dual-core) IOT2050 Basic variant
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 1
  * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
  */

 /dts-v1/;

-#include "k3-am65-iot2050-common.dtsi"
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"

 / {
 	compatible = "siemens,iot2050-basic", "ti,am654";
 	model = "SIMATIC IOT2050 Basic";
-
-	memory@80000000 {
-		device_type = "memory";
-		/* 1G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
-	};
-
-	cpus {
-		cpu-map {
-			/delete-node/ cluster1;
-		};
-		/delete-node/ cpu@100;
-		/delete-node/ cpu@101;
-	};
-
-	/delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
-};
-
-&main_pmx0 {
-	main_uart0_pins_default: main-uart0-pins-default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01e4, PIN_INPUT,  0)  /* (AF11) UART0_RXD */
-			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)  /* (AE11) UART0_TXD */
-			AM65X_IOPAD(0x01ec, PIN_INPUT,  0)  /* (AG11) UART0_CTSn */
-			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)  /* (AD11) UART0_RTSn */
-			AM65X_IOPAD(0x0188, PIN_INPUT,  1)  /* (D25) UART0_DCDn */
-			AM65X_IOPAD(0x018c, PIN_INPUT,  1)  /* (B26) UART0_DSRn */
-			AM65X_IOPAD(0x0190, PIN_OUTPUT, 1)  /* (A24) UART0_DTRn */
-			AM65X_IOPAD(0x0194, PIN_INPUT,  1)  /* (E24) UART0_RIN */
-		>;
-	};
-};
-
-&main_uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart0_pins_default>;
-};
-
-&mcu_r5fss0 {
-	/* lock-step mode not supported on this board */
-	ti,cluster-mode = <0>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
similarity index 85%
copy from arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
copy to arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index ec9617c13cdb..d25e8b26187f 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -4,10 +4,9 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6548-based (quad-core) IOT2050 Advanced variant
- * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ * Common bits of the IOT2050 Advanced variant, PG1 and PG2
  */

 /dts-v1/;
@@ -15,9 +14,6 @@
 #include "k3-am65-iot2050-common.dtsi"

 / {
-	compatible = "siemens,iot2050-advanced", "ti,am654";
-	model = "SIMATIC IOT2050 Advanced";
-
 	memory@80000000 {
 		device_type = "memory";
 		/* 2G RAM */
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
index ec9617c13cdb..077f165bdc68 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
@@ -4,57 +4,21 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6548-based (quad-core) IOT2050 Advanced variant
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 1
  * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
  */

 /dts-v1/;

-#include "k3-am65-iot2050-common.dtsi"
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"

 / {
 	compatible = "siemens,iot2050-advanced", "ti,am654";
 	model = "SIMATIC IOT2050 Advanced";
-
-	memory@80000000 {
-		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-	};
-};
-
-&main_pmx0 {
-	main_mmc0_pins_default: main-mmc0-pins-default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)  /* (B25) MMC0_CLK */
-			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP,   0)  /* (B27) MMC0_CMD */
-			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP,   0)  /* (A26) MMC0_DAT0 */
-			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP,   0)  /* (E25) MMC0_DAT1 */
-			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP,   0)  /* (C26) MMC0_DAT2 */
-			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP,   0)  /* (A25) MMC0_DAT3 */
-			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP,   0)  /* (E24) MMC0_DAT4 */
-			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP,   0)  /* (A24) MMC0_DAT5 */
-			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP,   0)  /* (B26) MMC0_DAT6 */
-			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP,   0)  /* (D25) MMC0_DAT7 */
-			AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP,  7)  /* (B23) MMC0_SDWP */
-			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP,   0)  /* (A23) MMC0_SDCD */
-			AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
-		>;
-	};
-};
-
-/* eMMC */
-&sdhci0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-	bus-width = <8>;
-	non-removable;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
-};
-
-&main_uart0 {
-	status = "disabled";
 };
--
2.31.1

[PATCH v5 5/6] arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

The current IOT2050 devices are Product Generation 1 (PG1), using SR1.0
AM65x silicon. Upcoming PG2 devices will use SR2.x SoCs and will
therefore need separate device trees. Prepare for that by factoring out
common bits that will be shared across both generations.

At this chance, drop a link to the product homepage to in the top-level
dts files. Also fix a typo in my email address in some headers.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 .../dts/ti/k3-am65-iot2050-common-pg1.dtsi    | 46 +++++++++++++++
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 35 +-----------
 ...ts => k3-am6528-iot2050-basic-common.dtsi} | 12 +---
 .../boot/dts/ti/k3-am6528-iot2050-basic.dts   | 56 +++----------------
 ...=> k3-am6548-iot2050-advanced-common.dtsi} |  8 +--
 .../dts/ti/k3-am6548-iot2050-advanced.dts     | 50 +++--------------
 6 files changed, 67 insertions(+), 140 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
 copy arch/arm64/boot/dts/ti/{k3-am6528-iot2050-basic.dts => k3-am6528-iot2050-basic-common.dtsi} (80%)
 copy arch/arm64/boot/dts/ti/{k3-am6548-iot2050-advanced.dts => k3-am6548-iot2050-advanced-common.dtsi} (85%)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
new file mode 100644
index 000000000000..51f902fa35a7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1
+ */
+
+&dss {
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&sdhci1 {
+	no-1-8-v;
+};
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index b29537088289..65da226847f4 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -4,13 +4,11 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * Common bits of the IOT2050 Basic and Advanced variants
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */

-/dts-v1/;
-
 #include "k3-am654.dtsi"
 #include <dt-bindings/phy/phy.h>

@@ -557,7 +555,6 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 };

 &usb0 {
@@ -631,10 +628,6 @@ dpi_out: endpoint {
 	};
 };

-&serdes0 {
-	status = "disabled";
-};
-
 &pcie0_rc {
 	status = "disabled";
 };
@@ -738,27 +731,3 @@ &icssg1_mdio {
 &icssg2_mdio {
 	status = "disabled";
 };
-
-&tx_pru0_0 {
-	status = "disabled";
-};
-
-&tx_pru0_1 {
-	status = "disabled";
-};
-
-&tx_pru1_0 {
-	status = "disabled";
-};
-
-&tx_pru1_1 {
-	status = "disabled";
-};
-
-&tx_pru2_0 {
-	status = "disabled";
-};
-
-&tx_pru2_1 {
-	status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
similarity index 80%
copy from arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
copy to arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 94bb5dd39122..4a9bf7d7c07d 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -4,20 +4,14 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6528-based (dual-core) IOT2050 Basic variant
- * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ * Common bits of the IOT2050 Basic variant, PG1 and PG2
  */

-/dts-v1/;
-
 #include "k3-am65-iot2050-common.dtsi"

 / {
-	compatible = "siemens,iot2050-basic", "ti,am654";
-	model = "SIMATIC IOT2050 Basic";
-
 	memory@80000000 {
 		device_type = "memory";
 		/* 1G RAM */
@@ -61,6 +55,6 @@ &main_uart0 {
 };

 &mcu_r5fss0 {
-	/* lock-step mode not supported on this board */
+	/* lock-step mode not supported on Basic boards */
 	ti,cluster-mode = <0>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
index 94bb5dd39122..87928ff28214 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
@@ -4,63 +4,21 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6528-based (dual-core) IOT2050 Basic variant
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 1
  * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
  */

 /dts-v1/;

-#include "k3-am65-iot2050-common.dtsi"
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"

 / {
 	compatible = "siemens,iot2050-basic", "ti,am654";
 	model = "SIMATIC IOT2050 Basic";
-
-	memory@80000000 {
-		device_type = "memory";
-		/* 1G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
-	};
-
-	cpus {
-		cpu-map {
-			/delete-node/ cluster1;
-		};
-		/delete-node/ cpu@100;
-		/delete-node/ cpu@101;
-	};
-
-	/delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
-};
-
-&main_pmx0 {
-	main_uart0_pins_default: main-uart0-pins-default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01e4, PIN_INPUT,  0)  /* (AF11) UART0_RXD */
-			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)  /* (AE11) UART0_TXD */
-			AM65X_IOPAD(0x01ec, PIN_INPUT,  0)  /* (AG11) UART0_CTSn */
-			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)  /* (AD11) UART0_RTSn */
-			AM65X_IOPAD(0x0188, PIN_INPUT,  1)  /* (D25) UART0_DCDn */
-			AM65X_IOPAD(0x018c, PIN_INPUT,  1)  /* (B26) UART0_DSRn */
-			AM65X_IOPAD(0x0190, PIN_OUTPUT, 1)  /* (A24) UART0_DTRn */
-			AM65X_IOPAD(0x0194, PIN_INPUT,  1)  /* (E24) UART0_RIN */
-		>;
-	};
-};
-
-&main_uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart0_pins_default>;
-};
-
-&mcu_r5fss0 {
-	/* lock-step mode not supported on this board */
-	ti,cluster-mode = <0>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
similarity index 85%
copy from arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
copy to arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index ec9617c13cdb..d25e8b26187f 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -4,10 +4,9 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6548-based (quad-core) IOT2050 Advanced variant
- * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ * Common bits of the IOT2050 Advanced variant, PG1 and PG2
  */

 /dts-v1/;
@@ -15,9 +14,6 @@
 #include "k3-am65-iot2050-common.dtsi"

 / {
-	compatible = "siemens,iot2050-advanced", "ti,am654";
-	model = "SIMATIC IOT2050 Advanced";
-
 	memory@80000000 {
 		device_type = "memory";
 		/* 2G RAM */
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
index ec9617c13cdb..077f165bdc68 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
@@ -4,57 +4,21 @@
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
- *   Jan Kiszka <jan.kiszk@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
  *
- * AM6548-based (quad-core) IOT2050 Advanced variant
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 1
  * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
  */

 /dts-v1/;

-#include "k3-am65-iot2050-common.dtsi"
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"

 / {
 	compatible = "siemens,iot2050-advanced", "ti,am654";
 	model = "SIMATIC IOT2050 Advanced";
-
-	memory@80000000 {
-		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-	};
-};
-
-&main_pmx0 {
-	main_mmc0_pins_default: main-mmc0-pins-default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)  /* (B25) MMC0_CLK */
-			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP,   0)  /* (B27) MMC0_CMD */
-			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP,   0)  /* (A26) MMC0_DAT0 */
-			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP,   0)  /* (E25) MMC0_DAT1 */
-			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP,   0)  /* (C26) MMC0_DAT2 */
-			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP,   0)  /* (A25) MMC0_DAT3 */
-			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP,   0)  /* (E24) MMC0_DAT4 */
-			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP,   0)  /* (A24) MMC0_DAT5 */
-			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP,   0)  /* (B26) MMC0_DAT6 */
-			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP,   0)  /* (D25) MMC0_DAT7 */
-			AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP,  7)  /* (B23) MMC0_SDWP */
-			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP,   0)  /* (A23) MMC0_SDCD */
-			AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
-		>;
-	};
-};
-
-/* eMMC */
-&sdhci0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-	bus-width = <8>;
-	non-removable;
-	ti,driver-strength-ohm = <50>;
-	disable-wp;
-};
-
-&main_uart0 {
-	status = "disabled";
 };
--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 6/6] arm64: dts: ti: iot2050: Add support for product generation 2 boards

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This adds the devices trees for IOT2050 Product Generation 2 (PG2)
boards. We have Basic and an Advanced variants again, differing in
number of cores, RAM size, availability of eMMC and further details.
The major difference to PG1 is the used silicon revision (SR2.x on
PG2).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-am65-iot2050-common-pg2.dtsi    | 51 +++++++++++++++++++
 .../dts/ti/k3-am6528-iot2050-basic-pg2.dts    | 24 +++++++++
 .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts | 29 +++++++++++
 4 files changed, 106 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index d56c742f5a10..41a4bc96e6bd 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -8,7 +8,9 @@

 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb

 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
new file mode 100644
index 000000000000..e73458ca6900
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG2
+ */
+
+&main_pmx0 {
+	cp2102n_reset_pin_default: cp2102n-reset-pin-default {
+		pinctrl-single,pins = <
+			/* (AF12) GPIO1_24, used as cp2102 reset */
+			AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	gpio-line-names =
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "CP2102N-RESET";
+};
+
+&dss {
+	/* Workaround needed to get DP clock of 154Mhz */
+	assigned-clocks = <&k3_clks 67 0>;
+};
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 8>;  /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+	phys = <&serdes0 PHY_TYPE_USB3 0>;
+	phy-names = "usb3-phy";
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
new file mode 100644
index 000000000000..c62549a4b436
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 2
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Basic PG2";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
new file mode 100644
index 000000000000..f00dc86d01b9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 2
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced PG2";
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
--
2.31.1

[PATCH v5 6/6] arm64: dts: ti: iot2050: Add support for product generation 2 boards

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This adds the devices trees for IOT2050 Product Generation 2 (PG2)
boards. We have Basic and an Advanced variants again, differing in
number of cores, RAM size, availability of eMMC and further details.
The major difference to PG1 is the used silicon revision (SR2.x on
PG2).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-am65-iot2050-common-pg2.dtsi    | 51 +++++++++++++++++++
 .../dts/ti/k3-am6528-iot2050-basic-pg2.dts    | 24 +++++++++
 .../dts/ti/k3-am6548-iot2050-advanced-pg2.dts | 29 +++++++++++
 4 files changed, 106 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index d56c742f5a10..41a4bc96e6bd 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -8,7 +8,9 @@

 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb

 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
new file mode 100644
index 000000000000..e73458ca6900
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG2
+ */
+
+&main_pmx0 {
+	cp2102n_reset_pin_default: cp2102n-reset-pin-default {
+		pinctrl-single,pins = <
+			/* (AF12) GPIO1_24, used as cp2102 reset */
+			AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	gpio-line-names =
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "CP2102N-RESET";
+};
+
+&dss {
+	/* Workaround needed to get DP clock of 154Mhz */
+	assigned-clocks = <&k3_clks 67 0>;
+};
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 8>;  /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+	phys = <&serdes0 PHY_TYPE_USB3 0>;
+	phy-names = "usb3-phy";
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
new file mode 100644
index 000000000000..c62549a4b436
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 2
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Basic PG2";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
new file mode 100644
index 000000000000..f00dc86d01b9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 2
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced PG2";
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
--
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 0/6] arm64: dts: Update IOT2050 boards

[Nishanth Menon]

On Sun, 26 Sep 2021 14:05:11 +0200, Jan Kiszka wrote:
> This enhances the DTs for the IOT2050, primarily by added support for
> upcoming Production Generation 2 (PG2) and by ordering the MMC devices
> consistently across variants.
> 
> Changes in v5:
>  - fix usb0 node (for true USB 3.0 support)
>  - added reviewed/acked tags
> 
> [...]

Hi Jan Kiszka,

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/6] arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices
      commit: 06784f7679274be3ca170a689c56192143a04541
[2/6] arm64: dts: ti: iot2050: Disable SR2.0-only PRUs
      commit: 262a98b43c2a08a5446bab2030f8fb68d3699396
[3/6] arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores
      commit: af755fe2b36c87abfa6f00caf7dfce6351b7412a
[4/6] dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards
      commit: 4f535a0e38f696cadc92cc980d25a4198b11ae33
[5/6] arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards
      commit: a9dbf044c600277f5d2805831a73083f3688e19f
[6/6] arm64: dts: ti: iot2050: Add support for product generation 2 boards
      commit: 614d47cc9303893c706c0c94516249eb3adaeb80


Side note:
- There are still cleanups that are in works (tsadc, cdns, etc..) - since
  these are already present and active cleanup is going on, letting it past,
  but if I do get a push back from upstream maintainers, I'd have to pull the
  series back.

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D)/Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH v5 0/6] arm64: dts: Update IOT2050 boards

[Nishanth Menon]

On Sun, 26 Sep 2021 14:05:11 +0200, Jan Kiszka wrote:
> This enhances the DTs for the IOT2050, primarily by added support for
> upcoming Production Generation 2 (PG2) and by ordering the MMC devices
> consistently across variants.
> 
> Changes in v5:
>  - fix usb0 node (for true USB 3.0 support)
>  - added reviewed/acked tags
> 
> [...]

Hi Jan Kiszka,

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/6] arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices
      commit: 06784f7679274be3ca170a689c56192143a04541
[2/6] arm64: dts: ti: iot2050: Disable SR2.0-only PRUs
      commit: 262a98b43c2a08a5446bab2030f8fb68d3699396
[3/6] arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores
      commit: af755fe2b36c87abfa6f00caf7dfce6351b7412a
[4/6] dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards
      commit: 4f535a0e38f696cadc92cc980d25a4198b11ae33
[5/6] arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards
      commit: a9dbf044c600277f5d2805831a73083f3688e19f
[6/6] arm64: dts: ti: iot2050: Add support for product generation 2 boards
      commit: 614d47cc9303893c706c0c94516249eb3adaeb80


Side note:
- There are still cleanups that are in works (tsadc, cdns, etc..) - since
  these are already present and active cleanup is going on, letting it past,
  but if I do get a push back from upstream maintainers, I'd have to pull the
  series back.

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D)/Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel