On 5/7/19 11:34 AM, Sean Nyekjaer wrote: > Fully compatible with mcp2515, the mcp25625 have > integrated transceiver. > > Signed-off-by: Sean Nyekjaer I've mentioned the mcp25625 to the .in file and properly introduced the mcp25625 as a new model in the driver itself. This way the debug output is formated properly: > netdev_info(net, "MCP%x successfully initialized.\n", priv->model); This is how the patch looks like now: From b1a45a5837c3501b75a9c542af809f80fe3dc0da Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Tue, 7 May 2019 11:34:36 +0200 Subject: [PATCH] can: mcp251x: add support for mcp25625 Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch adds support for the mcp25625 to the existing mcp251x driver. Signed-off-by: Sean Nyekjaer Signed-off-by: Marc Kleine-Budde --- drivers/net/can/spi/Kconfig | 5 +++-- drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++--------- 2 files changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig index 8f2e0dd7b756..792e9c6c4a2f 100644 --- a/drivers/net/can/spi/Kconfig +++ b/drivers/net/can/spi/Kconfig @@ -8,9 +8,10 @@ config CAN_HI311X Driver for the Holt HI311x SPI CAN controllers. config CAN_MCP251X - tristate "Microchip MCP251x SPI CAN controllers" + tristate "Microchip MCP251x and MCP25625 SPI CAN controllers" depends on HAS_DMA ---help--- - Driver for the Microchip MCP251x SPI CAN controllers. + Driver for the Microchip MCP251x and MCP25625 SPI CAN + controllers. endmenu diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c index e90817608645..da64e71a62ee 100644 --- a/drivers/net/can/spi/mcp251x.c +++ b/drivers/net/can/spi/mcp251x.c @@ -1,5 +1,5 @@ /* - * CAN bus driver for Microchip 251x CAN Controller with SPI Interface + * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface * * MCP2510 support and bug fixes by Christian Pellegrin * @@ -41,7 +41,7 @@ * static struct spi_board_info spi_board_info[] = { * { * .modalias = "mcp2510", - * // or "mcp2515" depending on your controller + * // "mcp2515" or "mcp25625" depending on your controller * .platform_data = &mcp251x_info, * .irq = IRQ_EINT13, * .max_speed_hz = 2*1000*1000, @@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = { enum mcp251x_model { CAN_MCP251X_MCP2510 = 0x2510, CAN_MCP251X_MCP2515 = 0x2515, + CAN_MCP251X_MCP25625 = 0x25625, }; struct mcp251x_priv { @@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \ } MCP251X_IS(2510); -MCP251X_IS(2515); static void mcp251x_clean(struct net_device *net) { @@ -639,7 +639,7 @@ static int mcp251x_hw_reset(struct spi_device *spi) /* Wait for oscillator startup timer after reset */ mdelay(MCP251X_OST_DELAY_MS); - + reg = mcp251x_read_reg(spi, CANSTAT); if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF) return -ENODEV; @@ -820,9 +820,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id) /* receive buffer 0 */ if (intf & CANINTF_RX0IF) { mcp251x_hw_rx(spi, 0); - /* - * Free one buffer ASAP - * (The MCP2515 does this automatically.) + /* Free one buffer ASAP + * (The MCP2515/25625 does this automatically.) */ if (mcp251x_is_2510(spi)) mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00); @@ -831,7 +830,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id) /* receive buffer 1 */ if (intf & CANINTF_RX1IF) { mcp251x_hw_rx(spi, 1); - /* the MCP2515 does this automatically */ + /* The MCP2515/25625 does this automatically. */ if (mcp251x_is_2510(spi)) clear_intf |= CANINTF_RX1IF; } @@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = { .compatible = "microchip,mcp2515", .data = (void *)CAN_MCP251X_MCP2515, }, + { + .compatible = "microchip,mcp25625", + .data = (void *)CAN_MCP251X_MCP25625, + }, { } }; MODULE_DEVICE_TABLE(of, mcp251x_of_match); @@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = { .name = "mcp2515", .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2515, }, + { + .name = "mcp25625", + .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP25625, + }, { } }; MODULE_DEVICE_TABLE(spi, mcp251x_id_table); @@ -1259,5 +1266,5 @@ module_spi_driver(mcp251x_can_driver); MODULE_AUTHOR("Chris Elston , " "Christian Pellegrin "); -MODULE_DESCRIPTION("Microchip 251x CAN driver"); +MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver"); MODULE_LICENSE("GPL v2"); -- 2.20.1 Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |