On Mon, Mar 6, 2023 at 2:07 PM Andy Shevchenko wrote: > > On Mon, Mar 06, 2023 at 01:36:51PM +0100, Benjamin Tissoires wrote: > > On Mon, Mar 6, 2023 at 11:49 AM Andy Shevchenko wrote: > > > On Thu, Mar 02, 2023 at 06:06:06PM +0100, Benjamin Tissoires wrote: > > > > On Mar 01 2023, Andy Shevchenko wrote: > > > > > On Tue, Feb 28, 2023 at 01:05:54PM -0600, Daniel Kaehn wrote: > > ... > > [1]: https://stackoverflow.com/a/60855157/2511795 > > > > > Thanks Andy for your help here, and thanks for that link. > > > > > > > > I am trying to test Danny's patch as I want to use it for my HID CI, > > > > being an owner of a CP2112 device myself. > > > > > > > > The current setup is using out of the tree patches [2] which are > > > > implementing a platform i2c-hid support and some manual addition of a > > > > I2C-HID device on top of it. This works fine but gets busted every now > > > > and then when the tree sees a change that conflicts with these patches. > > > > > > > > So with Danny's series, I thought I could have an SSDT override to > > > > declare that very same device instead of patching my kernel before > > > > testing it. > > > > > > > > Of course, it gets tricky because I need to run that under qemu. > > > > > > > > I am currently stuck at the "sharing the firmware_node from usb with > > > > HID" step and I'd like to know if you could help me. > > > > > > > > On my laptop, if I plug the CP2112 (without using a USB hub), I can get: > > > > > > > > $> ls -l /sys/bus/hid/devices/0003:10C4:EA90.* > > > > lrwxrwxrwx. 1 root root 0 Mar 2 17:02 /sys/bus/hid/devices/0003:10C4:EA90.0079 -> ../../../devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:10C4:EA90.0079 > > > > $> ls -l /sys/bus/usb/devices/2-9*/firmware_node > > > > lrwxrwxrwx. 1 root root 0 Mar 2 17:03 /sys/bus/usb/devices/2-9:1.0/firmware_node -> ../../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/device:16/device:25 > > > > lrwxrwxrwx. 1 root root 0 Mar 2 17:02 /sys/bus/usb/devices/2-9/firmware_node -> ../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/device:16/device:25 > > > > > > > > So AFAIU the USB device is properly assigned a firmware node. My dsdt > > > > also shows the "Device (RHUB)" and I guess everything is fine. > > > > > > Yes, so far so good. > > > > > > > However, playing with qemu is not so easy. > > > > > > > > I am running qemu with the following arguments (well, almost because I > > > > have a wrapper script on top of it and I also run the compiled kernel > > > > from the current tree): > > > > > > > > #> qemu-system-x86_64 -bios /usr/share/edk2/ovmf/OVMF_CODE.fd \ > > > > -netdev user,id=hostnet0 \ > > > > -device virtio-net-pci,netdev=hostnet0 \ > > > > -m 4G \ > > > > -enable-kvm \ > > > > -cpu host \ > > > > -device qemu-xhci -usb \ > > > > -device 'usb-host,vendorid=0x10c4,productid=0xea90' \ > > > > -cdrom ~/Downloads/Fedora-Workstation-Live-x86_64-37-1.7.iso > > > > > > Side question, where can I get those blobs from (EDKII and Fedora Live CD)? > > > I'm using Debian unstable. > > > > You can install the ovmf package in debian[3], which should have a > > similar file. > > For the Fedora livecd -> https://getfedora.org/fr/workstation/download/ > > but any other distribution with a recent enough kernel should show the > > same. > > Thank you! > > > > > And this is what I get: > > > > > > > > #> ls -l /sys/bus/hid/devices/0003:10C4:EA90.* > > > > lrwxrwxrwx 1 root root 0 Mar 2 16:10 /sys/bus/hid/devices/0003:10C4:EA90.0001 -> ../../../devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:10C4:EA90.0001 > > > > > > > > #> ls -l /sys/bus/usb/devices/2-1*/firmware_node > > > > ls: cannot access '/sys/bus/usb/devices/2-1*/firmware_node': No such file or directory > > > > > > > > Looking at the DSDT, I do not see any reference to the USB hub, so I > > > > wonder if the firmware_node needs to be populated first in the DSDT. > > > > > > So, where QEMU takes DSDT (ACPI tables in general) from? Can you patch that? > > > I believe that's the problem in qemu. > > > > That's a good question and it's one I am not sure I have the answer to. > > I would have assumed that the DSDT was in the OVMF firmware, but given > > that we can arbitrarily add command line arguments, I believe it > > probably just provides a baseline and then we are screwed. The OVMF bios > > is compiled only once, so I doubt there is any mechanism to > > enable/disable a component in the DSDT, or make it dynamically > > generated. > > We have two ways of filling missing parts: > 1) update the original source of DSDT (firmware or bootloader, > whichever provides that); > 2) adding an overlay. > > The 2) works _if and only if_ there is *no* existing object in the tables. > In such cases, you can simply provide a *full* hierarchy. See an example of > PCI devices in the kernel documentation on how to do that. I believe something > similar can be done for USB. Please find attached the dsdt from the Qemu VM. And after looking at it, your comments below, I think I am understanding what is happening (on the qemu side at least): #> grep PCI0.S /sys/bus/acpi/devices/*/path /sys/bus/acpi/devices/device:02/path:\_SB_.PCI0.S00_ /sys/bus/acpi/devices/device:03/path:\_SB_.PCI0.S10_ /sys/bus/acpi/devices/device:04/path:\_SB_.PCI0.S18_ /sys/bus/acpi/devices/device:05/path:\_SB_.PCI0.S20_ /sys/bus/acpi/devices/device:06/path:\_SB_.PCI0.S28_ /sys/bus/acpi/devices/device:07/path:\_SB_.PCI0.S30_ /sys/bus/acpi/devices/device:08/path:\_SB_.PCI0.S38_ /sys/bus/acpi/devices/device:09/path:\_SB_.PCI0.S40_ /sys/bus/acpi/devices/device:0a/path:\_SB_.PCI0.S48_ /sys/bus/acpi/devices/device:0b/path:\_SB_.PCI0.S50_ /sys/bus/acpi/devices/device:0c/path:\_SB_.PCI0.S58_ /sys/bus/acpi/devices/device:0d/path:\_SB_.PCI0.S60_ /sys/bus/acpi/devices/device:0e/path:\_SB_.PCI0.S68_ /sys/bus/acpi/devices/device:0f/path:\_SB_.PCI0.S70_ /sys/bus/acpi/devices/device:10/path:\_SB_.PCI0.S78_ /sys/bus/acpi/devices/device:11/path:\_SB_.PCI0.S80_ /sys/bus/acpi/devices/device:12/path:\_SB_.PCI0.S88_ /sys/bus/acpi/devices/device:13/path:\_SB_.PCI0.S90_ /sys/bus/acpi/devices/device:14/path:\_SB_.PCI0.S98_ /sys/bus/acpi/devices/device:15/path:\_SB_.PCI0.SA0_ /sys/bus/acpi/devices/device:16/path:\_SB_.PCI0.SA8_ /sys/bus/acpi/devices/device:17/path:\_SB_.PCI0.SB0_ /sys/bus/acpi/devices/device:18/path:\_SB_.PCI0.SB8_ /sys/bus/acpi/devices/device:19/path:\_SB_.PCI0.SC0_ /sys/bus/acpi/devices/device:1a/path:\_SB_.PCI0.SC8_ /sys/bus/acpi/devices/device:1b/path:\_SB_.PCI0.SD0_ /sys/bus/acpi/devices/device:1c/path:\_SB_.PCI0.SD8_ /sys/bus/acpi/devices/device:1d/path:\_SB_.PCI0.SE0_ /sys/bus/acpi/devices/device:1e/path:\_SB_.PCI0.SE8_ /sys/bus/acpi/devices/device:1f/path:\_SB_.PCI0.SF0_ /sys/bus/acpi/devices/device:20/path:\_SB_.PCI0.SF8_ And those translate on the DSDT as (for the S30/S38 chunk I am interested in): Device (S30) { Name (_ADR, 0x00060000) // _ADR: Address Name (ASUN, 0x06) Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, ASUN)) } Name (_SUN, 0x06) // _SUN: Slot User Number Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9 { PCEJ (BSEL, _SUN) } } Device (S38) { Name (_ADR, 0x00070000) // _ADR: Address Name (ASUN, 0x07) Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, ASUN)) } Name (_SUN, 0x07) // _SUN: Slot User Number Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9 { PCEJ (BSEL, _SUN) } } The forwarded USB node is actually on device:07 -> S30_, and as much as I'd like it to be a regular USB hub, this looks like a virtio node entry that allows to forward a physical device to the VM. So IMO, the missing piece might rely on the virtio-usb code which doesn't export the firmware node, which means I can not extend the device with an SSDT overlay ATM because the USB node doesn't have the fw_node. > > > > > Also note that if I plug the CP2112 over a docking station, I lose the > > > > firmware_node sysfs entries on the host too. > > > > > > This seems like a lack of firmware node propagating in the USB hub code in > > > the Linux kernel. > > > > That would make a lot of sense. > > > > FWIW, in the VM I see a firmware node on the pci controller itself: > > #> ls -l /sys/devices/pci0000\:00/0000\:00\:06.0/firmware_node > > lrwxrwxrwx 1 root root 0 Mar 6 12:24 /sys/devices/pci0000:00/0000:00:06.0/firmware_node -> ../../LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07 > > > > And one the host, through a USB hub: > > > > #> ls -l /sys/bus/hid/devices/0003:10C4:EA90.* > > lrwxrwxrwx. 1 root root 0 Mar 6 13:26 /sys/bus/hid/devices/0003:10C4:EA90.007C -> ../../../devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8.2/2-8.2.4/2-8.2.4:1.0/0003:10C4:EA90.007C > > #> ls -l /sys/bus/usb/devices/2-8*/firmware_node > > lrwxrwxrwx. 1 root root 0 Mar 2 16:53 /sys/bus/usb/devices/2-8:1.0/firmware_node -> ../../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/device:16/device:1e > > lrwxrwxrwx. 1 root root 0 Mar 2 16:53 /sys/bus/usb/devices/2-8/firmware_node -> ../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/device:16/device:1e > > > > Note that the firmware node propagation stopped at 2-8, and 2.8.2 is not > > having a firmware node. > > It would be nice if you can run `grep -H 15 /sys/bus/acpi/devices/*/status`, This command (both on the host and on the VM) does not show any USB device or even the PCI USB controller itself (PNP0A08 or PNP0A03). > filter out unneeded ones, and for the rest also print their paths: > `cat filtered_list_of_acpi_devs | while read p; do grep -H . $p/path; done` see above for the VM case, and in the host: #> grep XHC /sys/bus/acpi/devices/*/path /sys/bus/acpi/devices/device:15/path:\_SB_.PCI0.XHC_ /sys/bus/acpi/devices/device:16/path:\_SB_.PCI0.XHC_.RHUB /sys/bus/acpi/devices/device:17/path:\_SB_.PCI0.XHC_.RHUB.HS01 /sys/bus/acpi/devices/device:18/path:\_SB_.PCI0.XHC_.RHUB.HS02 /sys/bus/acpi/devices/device:19/path:\_SB_.PCI0.XHC_.RHUB.HS03 /sys/bus/acpi/devices/device:1a/path:\_SB_.PCI0.XHC_.RHUB.HS04 /sys/bus/acpi/devices/device:1b/path:\_SB_.PCI0.XHC_.RHUB.HS05 /sys/bus/acpi/devices/device:1c/path:\_SB_.PCI0.XHC_.RHUB.HS06 /sys/bus/acpi/devices/device:1d/path:\_SB_.PCI0.XHC_.RHUB.HS07 /sys/bus/acpi/devices/device:1e/path:\_SB_.PCI0.XHC_.RHUB.HS08 /sys/bus/acpi/devices/device:1f/path:\_SB_.PCI0.XHC_.RHUB.SS01 /sys/bus/acpi/devices/device:20/path:\_SB_.PCI0.XHC_.RHUB.SS02 /sys/bus/acpi/devices/device:21/path:\_SB_.PCI0.XHC_.RHUB.SS03 /sys/bus/acpi/devices/device:22/path:\_SB_.PCI0.XHC_.RHUB.SS04 /sys/bus/acpi/devices/device:23/path:\_SB_.PCI0.XHC_.RHUB.SS05 /sys/bus/acpi/devices/device:24/path:\_SB_.PCI0.XHC_.RHUB.SS06 /sys/bus/acpi/devices/device:25/path:\_SB_.PCI0.XHC_.RHUB.HS09 /sys/bus/acpi/devices/device:26/path:\_SB_.PCI0.XHC_.RHUB.HS10 /sys/bus/acpi/devices/device:27/path:\_SB_.PCI0.XHC_.RHUB.USR1 /sys/bus/acpi/devices/device:28/path:\_SB_.PCI0.XHC_.RHUB.USR2 /sys/bus/acpi/devices/device:85/path:\_SB_.PCI0.TXHC /sys/bus/acpi/devices/device:86/path:\_SB_.PCI0.TXHC.RHUB /sys/bus/acpi/devices/device:87/path:\_SB_.PCI0.TXHC.RHUB.HS01 /sys/bus/acpi/devices/device:88/path:\_SB_.PCI0.TXHC.RHUB.SS01 /sys/bus/acpi/devices/device:89/path:\_SB_.PCI0.TXHC.RHUB.SS02 /sys/bus/acpi/devices/device:8a/path:\_SB_.PCI0.TXHC.RHUB.SS03 /sys/bus/acpi/devices/device:8b/path:\_SB_.PCI0.TXHC.RHUB.SS04 Which is coherent with the ../../../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/device:16/device:1e I get when looking at the USB port. > > With this we will see what devices are actually present and up and running > in the system and what their paths in the ACPI namespace. So it seems that the USB hub functionality is not creating fw_nodes for its children. But I am not sure this is a battle we want to fight right now, because it doesn't make a lot of sense IMO to add an SSDT overlay on a hub. > > > > > Do you think it would be achievable to emulate that over qemu and use a > > > > mainline kernel without patches? > > > > > > As long as qemu provides correct DSDT it should work I assume. > > > > Just to be sure I understand, for this to work, we need the DSDT to > > export a "Device(RHUB)"? > > Not sure I understand the term "export" here. We need a description > of the (to describe) missing parts. Yes, I meant "to describe" it. > > > Or if we fix the USB fw_node propagation, could we just overwrite > > "\_SB_.PCI0.S30_"? "\_SB_.PCI0.S30_" is the name the ACPI is giving to > > the USB port in my VM case AFAIU. > > I have no idea what is the S30 node. That gave me the hint I needed, I think. The problem must be in the virtio drivers, where it doesn't attach the fw_node to the components it creates. We probably need kind of the same patch Danny is sending in 2/3 in this series, but for virtio. Cheers, Benjamin > > [2] https://gitlab.freedesktop.org/bentiss/gitlab-kernel-ci/-/tree/master/VM > [3] https://packages.debian.org/buster/all/ovmf/filelist > > -- > With Best Regards, > Andy Shevchenko > >