From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marcin Juszkiewicz Date: Mon, 25 May 2020 11:27:41 +0200 Subject: [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support In-Reply-To: References: <20200513071344.5430-1-frank.wang@rock-chips.com> <980cb3fd-6698-ab9e-65ca-b7e47b0e0842@juszkiewicz.com.pl> Message-ID: <1d288372-b473-5117-26bb-6ed45a198e09@juszkiewicz.com.pl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de W dniu 25.05.2020 o?11:24, Jagan Teki pisze: > On Mon, May 25, 2020 at 2:36 PM Marcin Juszkiewicz > wrote: >> >> W dniu 13.05.2020 o 09:13, frank.wang at rock-chips.com (Frank Wang) pisze: >>> This series add quirks for DWC3 and add Rockchip RK3399 USB3.0 host support. >>> >>> The function has been tested pass on rk3399-evb and roc-rk3399-pc board. >>> >>> For V5 update: >>> - Fix dwc3-generic driver followed Marek's comments for [PATCH v4 12/16]. >>> - Add 'Reviewed-by' and 'Tested-by' tag for [PATCH v4 07/16] and [PATCH v4 08/16]. >> >> I imported patchset and started it on RockPro64. Enabled same config >> options as on evb-rk3399. DeviceTree entries were already setup. >> >> Pendrive in USB3 (type A) port gets recognized as SuperSpeed one (was >> HighSpeed before). Type C port is not working - nevermind is it empty, >> with usb-c pendrive plugged or with usb-c to usb-a/c/hdmi dongle with >> usb-a pendrive. > > Does that mean usb-c pendrive is also detected? No - "scanning bus dwc3 for devices... cannot reset port 1!?" every time and devices plugged into usb-c are ignored.