[PATCH v3 0/7] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t

[Kuwano Takahiro <tkuw584924@gmail.com>]

Hi Jagan,

On 11/4/2020 5:10 PM, tkuw584924 at gmail.com wrote:
> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> 
> The S25HL-T/S25HS-T family is the Cypress Semper Flash with Quad SPI.
> The datasheet can be found in https://community.cypress.com/docs/DOC-15165
> Tested on Xilinx Zynq-7000 FPGA board.
> 
> Takahiro Kuwano (7):
>   mtd: spi-nor: Add Cypress manufacturer ID
>   mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t
>   mtd: spi-nor: Add support for volatile QE bit
>   mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte
>   mtd: spi-nor-core: Add overlaid sector erase feature
>   mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t
>   mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t
> 
>  drivers/mtd/spi/spi-nor-core.c | 178 +++++++++++++++++++++++++++++++++
>  drivers/mtd/spi/spi-nor-ids.c  |  24 +++++
>  drivers/mtd/spi/spi-nor-tiny.c |  73 ++++++++++++++
>  include/linux/mtd/spi-nor.h    |   3 +
>  4 files changed, 278 insertions(+)
> 
> ---
> Changes since v3:
>   - Split into multiple patches
> 
> Changes since v2:
>   - Fixed typo in comment for spansion_overlaid_erase()
>   - Fixed expressions for addr and len check in spansion_overlaid_erase()
>   - Added device ID check to make the changes effective for S25 only
>   - Added nor->setup() and fixup hooks based on the following patches
>     https://patchwork.ozlabs.org/project/uboot/patch/20200904153500.3569-7-p.yadav at ti.com/
>     https://patchwork.ozlabs.org/project/uboot/patch/20200904153500.3569-8-p.yadav at ti.com/
>     https://patchwork.ozlabs.org/project/uboot/patch/20200904153500.3569-9-p.yadav at ti.com/
> 

Please let me revise this series. 
I would like to add 2Gb (dual die package) and 4Gb (quad die package)
pats support.

Thanks,
Takahiro