From mboxrd@z Thu Jan 1 00:00:00 1970 From: Minkyu Kang Date: Wed, 10 Feb 2010 14:48:35 +0900 Subject: [U-Boot] [PATCH 1/3] S5PC100: Memory SubSystem Header file, register description(SROMC). In-Reply-To: <1265708054-10917-1-git-send-email-ch.naveen@samsung.com> References: <1265707341-25956-1-git-send-email-ch.naveen@samsung.com> <1265708054-10917-1-git-send-email-ch.naveen@samsung.com> Message-ID: <1f3430fb1002092148xe8e0566x285e37785bc109b5@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Naveen Krishna Ch, On 9 February 2010 18:34, Naveen Krishna Ch wrote: > From: Naveen Krishna CH > > Memory subsystem of S5PC100 handles SROM, SRAM, OneDRAM, OneNand, > NAND Flash, DDRs. > mem.h is a common place for the register description of Memory subsystem > of S5PC100. > Note: Only SROM related registers are descibed now. > > Signed-off-by: Naveen Krishna Ch samsung.com> > --- > ?include/asm-arm/arch-s5pc1xx/mem.h | ? 55 ++++++++++++++++++++++++++++++++++++ > ?1 files changed, 55 insertions(+), 0 deletions(-) > ?create mode 100644 include/asm-arm/arch-s5pc1xx/mem.h > > diff --git a/include/asm-arm/arch-s5pc1xx/mem.h b/include/asm-arm/arch-s5pc1xx/mem.h > new file mode 100644 > index 0000000..66272ff > --- /dev/null > +++ b/include/asm-arm/arch-s5pc1xx/mem.h I think srom.h is better than mem.h. > @@ -0,0 +1,55 @@ > +/* > + * (C) Copyright 2010 Samsung Electronics > + * Naveen Krishna Ch > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + * > + * Note: This file contains the register description for Memory subsystem > + * ? ? ?(SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX. > + * > + * ? ? ?Only SROMC is defined as of now > + */ > + > +#ifndef __ASM_ARCH_MEM_H_ > +#define __ASM_ARCH_MEM_H_ > + > +#define SROM_DATA16_WIDTH(x) ? ?(1<<((x*4)+0)) > +#define SROM_BYTE_ADDR_MODE(x) ?(1<<((x*4)+1)) ?/* 0-> Half-word base address*/ > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* 1-> Byte base address*/ > +#define SROM_WAIT_ENABLE(x) ? ? (1<<((x*4)+2)) > +#define SROM_BYTE_ENABLE(x) ? ? (1<<((x*4)+3)) Do you use all of these defines? > + > +#define SMCBC_X_Tacs ? ?(0x0) ? /* 0clk ? ? ? ? address set-up */ > +#define SMCBC_X_Tcos ? ?(0x4) ? /* 4clk ? ? ? ? chip selection set-up */ > +#define SMCBC_X_Tacc ? ?(0xe) ? /* 14clk ? ? ? ?access cycle */ > +#define SMCBC_X_Tcoh ? ?(0x1) ? /* 1clk ? ? ? ? chip selection hold */ > +#define SMCBC_X_Tah ? ? (0x4) ? /* 4clk ? ? ? ? address holding time */ > +#define SMCBC_X_Tacp ? ?(0x6) ? /* 6clk ? ? ? ? page mode access cycle */ > +#define SMCBC_X_PMC ? ? (0x0) ? /* normal(1data)page mode configuration */ Please don't use lowercase at define and () is unnecessary. and.. what mean X is? > + > +#define SMC_BC_X_CON ? ?((SMCBC_X_Tacs<<28)|(SMCBC_X_Tcos<<24)| \ > + ? ? ? ? ? ? ? ? ? ? ? ?(SMCBC_X_Tacc<<16)|(SMCBC_X_Tcoh<<12)| \ > + ? ? ? ? ? ? ? ? ? ? ? ?(SMCBC_X_Tah<<8)|(SMCBC_X_Tacp<<4)| ? ?\ > + ? ? ? ? ? ? ? ? ? ? ? ?(SMCBC_X_PMC)) > + > +#ifndef __ASSEMBLY__ > +struct s5pc1xx_sromc { > + ? ? ? unsigned int ? ?smc_bw; > + ? ? ? unsigned int ? ?smc_bc[6]; > +}; > +#endif /* __ASSEMBLY__ */ smc_bw and smc_bc are already belong to sromc structure. is "smc_" really need? Please modify it to bw and bc or srom_bw and srom_bc (according to TRM) > + > +#endif /* __ASM_ARCH_MEM_H_ */ > -- > 1.6.6 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > Thanks, Minkyu Kang. -- from. prom. www.promsoft.net