From mboxrd@z Thu Jan 1 00:00:00 1970 To: deepesh@india.tejasnetworks.com Cc: Ethan Benson , linuxppc-dev@lists.linuxppc.org Subject: Re: Question regarding UBOOT. From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Sat, 19 Jul 2003 19:28:08 +0530." Date: Sat, 19 Jul 2003 18:29:25 +0200 Message-Id: <20030719162930.E88E4C6D82@atlas.denx.de> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: In message you wrote: > > > I have an EP8260 board. I have the u-boot binary. The board comes with a > boot loader(PlanetCore). I want to load u-boot into RAM and then start > executing from there. Is this possible? I tried doing this, but the board > goes for a reset. If the bianry is all you have then the answer is no, it cannot be done. If you knoiw exactly what you're doing you can modify the U-Boot source code to behave like you want - but then you have to ask yourself _why_ you would want to do that. My $ 0.02: Install U-Boot. Forget the other bootloader. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de If there are self-made purgatories, then we all have to live in them. -- Spock, "This Side of Paradise", stardate 3417.7 ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/