* INIT: USB FATAL in for Kernel 2.5.xx and 2.6.xx in Redhat v9.0 PLease Read.
@ 2003-07-20 21:10 Ronald Jerome
2003-07-21 14:31 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Ronald Jerome @ 2003-07-20 21:10 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1454 bytes --]
After installing RH 9.0 and installing rawhide's
mkinitrd and moduitls rpm's as well as non kernel
updates from "http://people.redhat.com/arjanv/2.5/",
I still have a problem with USB.
Note: after updating the mkinitrd and modutils, the
generate-modprobe.conf must automatically run and did
run because it was created in /etc/modprobe.conf. I
did not have to generate it manually.
I have 2.4.20-8, 2.4.20-18.9 boot jsut fine with the
updated mkinitrd and modutils but I still have
problems with kernel 2.5.75-mm1 and 2.6.0-test1-mm2.
I have also attached my modules.conf and modprobe,conf
and my rc.sysinit, so maybe you can tell me what I
need to do to fix this
issue for 2.5.xx and 2.6.xx kernels.
One thing I knwo for sure is that in 2.5.xx and 2.6.xx
kernels there is no usb-uhci.o driver. I believe they
changes the name and I wonder if this is why I am
having problems booting the 2.5.xx and 2.6.xx serieis
kernels?
During the INIT:
Initializing USB Controller (usb_uhci): FATAL: Module
usb_uhci not found [Failed]
Mounting USB filesystem: [ok]
grep: /proc/bus/usb/drivers: no such file or directory
Initializing USB HID interface: [ok]
Initializing USB keybaord: FATAL: module keybdev not
found. [Failed]
Initializing USB mouse: FATAL: module mousdev not
found. [Failed]
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
[-- Attachment #2: modprobe.conf --]
[-- Type: application/octet-stream, Size: 411 bytes --]
include /etc/modprobe.conf.dist
alias eth0 3c59x
alias usb-controller usb-uhci
alias ieee1394-controller ohci1394
alias sound-slot-0 i810_audio
install sound-slot-0 /sbin/modprobe --ignore-install sound-slot-0 && { /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :; }
remove sound-slot-0 { /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :; }; /sbin/modprobe -r --ignore-remove sound-slot-0
[-- Attachment #3: modules.conf --]
[-- Type: application/octet-stream, Size: 282 bytes --]
alias eth0 3c59x
alias usb-controller usb-uhci
alias ieee1394-controller ohci1394
alias sound-slot-0 i810_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
[-- Attachment #4: rc.sysinit --]
[-- Type: application/octet-stream, Size: 23570 bytes --]
#!/bin/bash
#
# /etc/rc.d/rc.sysinit - run once at boot time
#
# Taken in part from Miquel van Smoorenburg's bcheckrc.
#
# Rerun ourselves through initlog
if [ -z "$IN_INITLOG" -a -x /sbin/initlog ]; then
exec /sbin/initlog $INITLOG_ARGS -r /etc/rc.d/rc.sysinit
fi
# If we're using devfs, start devfsd now - we need the old device names
[ -e /dev/.devfsd -a -x /sbin/devfsd ] && /sbin/devfsd /dev
HOSTNAME=`/bin/hostname`
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
fi
if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
HOSTNAME=localhost
fi
. /etc/init.d/functions
HOSTTYPE=`uname -m`
if [ "$HOSTTYPE" != "s390" -a "$HOSTTYPE" != "s390x" ]; then
last=0
for i in `LC_ALL=C grep '^[0-9].*respawn:/sbin/mingetty' /etc/inittab | sed 's/^.* tty\([0-9][0-9]*\).*/\1/g'`; do
> /dev/tty$i
last=$i
done
if [ $last -gt 0 ]; then
> /dev/tty$((last+1))
> /dev/tty$((last+2))
fi
fi
update_boot_stage RCconsole
if [ "$CONSOLETYPE" = "vt" -a -x /sbin/setsysfont ]; then
echo -n "Setting default font ($SYSFONT): "
/sbin/setsysfont
if [ $? -eq 0 ]; then
success
else
failure
fi
echo ; echo
fi
# Print a text banner.
echo -en $"\t\tWelcome to "
if LC_ALL=C grep -q "Red Hat" /etc/redhat-release ; then
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;31m"
echo -en "Red Hat"
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
PRODUCT=`sed "s/Red Hat \(.*\) release.*/\1/" /etc/redhat-release`
echo " $PRODUCT"
else
PRODUCT=`sed "s/ release.*//g" /etc/redhat-release`
echo "$PRODUCT"
fi
if [ "$PROMPT" != "no" ]; then
echo -en $"\t\tPress 'I' to enter interactive startup."
echo
fi
# Fix console loglevel
if [ -n "$LOGLEVEL" ]; then
/bin/dmesg -n $LOGLEVEL
fi
# Mount /proc (done here so volume labels can work with fsck)
#update_boot_stage RCproc
action $"Mounting proc filesystem: " mount -n -t proc /proc /proc
# Start the graphical boot, if necessary
if ! fgrep -q nogui /proc/cmdline && [ "$BOOTUP" = "color" -a "$GRAPHICAL" = "yes" -a -x /usr/bin/rhgb ]; then
/usr/bin/rhgb
fi
# Unmount the initrd, if necessary
if LC_ALL=C grep -q /initrd /proc/mounts && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts ; then
if [ -e /initrd/dev/.devfsd ]; then
umount /initrd/dev
fi
action $"Unmounting initrd: " umount /initrd
/sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
fi
# Configure kernel parameters
update_boot_stage RCkernelparam
action $"Configuring kernel parameters: " sysctl -e -p /etc/sysctl.conf
# Set the system clock.
update_boot_stage RCclock
ARC=0
SRM=0
UTC=0
if [ -f /etc/sysconfig/clock ]; then
. /etc/sysconfig/clock
# convert old style clock config to new values
if [ "${CLOCKMODE}" = "GMT" ]; then
UTC=true
elif [ "${CLOCKMODE}" = "ARC" ]; then
ARC=true
fi
fi
CLOCKDEF=""
CLOCKFLAGS="$CLOCKFLAGS --hctosys"
case "$UTC" in
yes|true) CLOCKFLAGS="$CLOCKFLAGS --utc"
CLOCKDEF="$CLOCKDEF (utc)" ;;
no|false) CLOCKFLAGS="$CLOCKFLAGS --localtime"
CLOCKDEF="$CLOCKDEF (localtime)" ;;
esac
case "$ARC" in
yes|true) CLOCKFLAGS="$CLOCKFLAGS --arc"
CLOCKDEF="$CLOCKDEF (arc)" ;;
esac
case "$SRM" in
yes|true) CLOCKFLAGS="$CLOCKFLAGS --srm"
CLOCKDEF="$CLOCKDEF (srm)" ;;
esac
/sbin/hwclock $CLOCKFLAGS
action $"Setting clock $CLOCKDEF: `date`" date
if [ "$CONSOLETYPE" = "vt" -a -x /bin/loadkeys ]; then
KEYTABLE=
KEYMAP=
if [ -f /etc/sysconfig/console/default.kmap ]; then
KEYMAP=/etc/sysconfig/console/default.kmap
else
if [ -f /etc/sysconfig/keyboard ]; then
. /etc/sysconfig/keyboard
fi
if [ -n "$KEYTABLE" -a -d "/lib/kbd/keymaps" ]; then
KEYMAP=$KEYTABLE
fi
fi
if [ -n "$KEYMAP" ]; then
# Since this takes in/output from stdin/out, we can't use initlog
if [ -n "$KEYTABLE" ]; then
echo -n $"Loading default keymap ($KEYTABLE): "
else
echo -n $"Loading default keymap: "
fi
loadkeys $KEYMAP < /dev/tty0 > /dev/tty0 2>/dev/null && \
success $"Loading default keymap" || failure $"Loading default keymap"
echo
fi
fi
# Set the hostname.
update_boot_stage RChostname
action $"Setting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
# Only read this once.
cmdline=$(cat /proc/cmdline)
# Initialize USB controller and HID devices
update_boot_stage RCusb
usb=0
if ! strstr "$cmdline" nousb ; then
if ! LC_ALL=C grep -q "usb" /proc/devices 2>/dev/null ; then
aliases=`/sbin/modprobe -c | awk '/^alias usb-controller/ { print $3 }'`
if [ -n "$aliases" -a "$aliases" != "off" ]; then
modprobe usbcore
for alias in $aliases ; do
[ "$alias" = "off" ] && continue
action $"Initializing USB controller ($alias): " modprobe $alias
done
[ $? -eq 0 -a -n "$aliases" ] && usb=1
fi
fi
if LC_ALL=C grep -q "usb" /proc/devices 2>/dev/null ; then
usb=1
fi
fi
if [ $usb = 1 -a ! -f /proc/bus/usb/devices ]; then
action $"Mounting USB filesystem: " mount -t usbdevfs usbdevfs /proc/bus/usb
fi
needusbstorage=
if [ $usb = "1" ]; then
needusbstorage=`LC_ALL=C grep -e "^I.*Cls=08" /proc/bus/usb/devices 2>/dev/null`
LC_ALL=C grep 'hid' /proc/bus/usb/drivers || action $"Initializing USB HID interface: " modprobe hid 2> /dev/null
action $"Initializing USB keyboard: " modprobe keybdev 2> /dev/null
action $"Initializing USB mouse: " modprobe mousedev 2> /dev/null
fi
if [ -f /fastboot ] || strstr "$cmdline" fastboot ; then
fastboot=yes
fi
if [ -f /fsckoptions ]; then
fsckoptions=`cat /fsckoptions`
fi
if [ -f /forcefsck ] || strstr "$cmdline" forcefsck ; then
fsckoptions="-f $fsckoptions"
elif [ -f /.autofsck ]; then
echo $"Your system appears to have shut down uncleanly"
AUTOFSCK_TIMEOUT=5
[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT=-f
fi
if [ "$PROMPT" != "no" ]; then
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
if /sbin/getkey -c $AUTOFSCK_TIMEOUT -m $"Press N within %d seconds to not force file system integrity check..." n ; then
AUTOFSCK_OPT=
fi
else
if /sbin/getkey -c $AUTOFSCK_TIMEOUT -m $"Press Y within %d seconds to force file system integrity check..." y ; then
AUTOFSCK_OPT=-f
fi
fi
echo
else
# PROMPT not allowed
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
echo $"Forcing file system integrity check due to default setting"
else
echo $"Not forcing file system integrity check due to default setting"
fi
fi
fsckoptions="$AUTOFSCK_OPT $fsckoptions"
fi
if [ "$BOOTUP" = "color" ]; then
fsckoptions="-C $fsckoptions"
else
fsckoptions="-V $fsckoptions"
fi
_RUN_QUOTACHECK=0
ROOTFSTYPE=`awk '/ \/ / && ($3 !~ /rootfs/) { print $3 }' /proc/mounts`
if [ -z "$fastboot" -a "X$ROOTFSTYPE" != "Xnfs" ]; then
STRING=$"Checking root filesystem"
echo $STRING
initlog -c "fsck -T -a / $fsckoptions"
rc=$?
if [ "$rc" = "0" ]; then
success "$STRING"
echo
elif [ "$rc" = "1" ]; then
passed "$STRING"
echo
fi
# A return of 2 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 1
fi
failure "$STRING"
echo
echo
echo $"*** An error occurred during the file system check."
echo $"*** Dropping you to a shell; the system will reboot"
echo $"*** when you leave the shell."
str=$"(Repair filesystem)"
PS1="$str \# # "; export PS1
sulogin
echo $"Unmounting file systems"
umount -a
mount -n -o remount,ro /
echo $"Automatic reboot in progress."
reboot -f
elif [ "$rc" = "1" ]; then
_RUN_QUOTACHECK=1
fi
fi
# Possibly update quotas if fsck was run on /.
LC_ALL=C grep -E '[[:space:]]+/[[:space:]]+' /etc/fstab | \
awk '{ print $4 }' | \
LC_ALL=C grep -q quota
_ROOT_HAS_QUOTA=$?
if [ X"$_RUN_QUOTACHECK" = X1 -a \
"$_ROOT_HAS_QUOTA" = "0" -a \
-x /sbin/quotacheck ]; then
if [ -x /sbin/convertquota ]; then
if [ -f /quota.user ]; then
action $"Converting old user quota files: " \
/sbin/convertquota -u / && rm -f /quota.user
fi
if [ -f /quota.group ]; then
action $"Converting old group quota files: " \
/sbin/convertquota -g / && rm -f /quota.group
fi
fi
action $"Checking root filesystem quotas: " /sbin/quotacheck -nug /
fi
if [ -x /sbin/isapnp -a -f /etc/isapnp.conf -a ! -f /proc/isapnp ]; then
# check for arguments passed from kernel
if ! strstr "$cmdline" nopnp ; then
PNP=yes
fi
if [ -n "$PNP" ]; then
action $"Setting up ISA PNP devices: " /sbin/isapnp /etc/isapnp.conf
else
action $"Skipping ISA PNP configuration at users request: " /bin/true
fi
fi
# Remount the root filesystem read-write.
update_boot_stage RCmountfs
state=`awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts`
[ "$state" != "rw" ] && \
action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
# LVM initialization
if [ -f /etc/lvmtab ]; then
[ -e /proc/lvm ] || modprobe lvm-mod > /dev/null 2>&1
if [ -e /proc/lvm -a -x /sbin/vgchange ]; then
action $"Setting up Logical Volume Management:" /sbin/vgscan && /sbin/vgchange -a y
fi
fi
# Start up swapping.
update_boot_stage RCswap
action $"Activating swap partitions: " swapon -a -e
# Clear mtab
> /etc/mtab
# Remove stale backups
rm -f /etc/mtab~ /etc/mtab~~
# Enter root, /proc and (potentially) /proc/bus/usb and devfs into mtab.
mount -f /
mount -f /proc
[ -f /proc/bus/usb/devices ] && mount -f -t usbdevfs usbdevfs /proc/bus/usb
[ -e /dev/.devfsd ] && mount -f -t devfs devfs /dev
# The root filesystem is now read-write, so we can now log
# via syslog() directly..
if [ -n "$IN_INITLOG" ]; then
IN_INITLOG=
fi
if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
USEMODULES=y
fi
unamer=`uname -r`
# Our modutils don't support it anymore, so we might as well remove
# the preferred link.
rm -f /lib/modules/preferred /lib/modules/default
if [ -x /sbin/depmod -a -n "$USEMODULES" ]; then
# If they aren't using a recent sane kernel, make a link for them
if ! strstr $unamer - ; then
ktag="`cat /proc/version`"
mtag=`LC_ALL=C grep -l "$ktag" /lib/modules/*/.rhkmvtag 2> /dev/null`
if [ -n "$mtag" ]; then
mver=`echo $mtag | sed -e 's,/lib/modules/,,' -e 's,/.rhkmvtag,,' -e 's,[ ].*$,,'`
fi
if [ -n "$mver" ]; then
ln -sf /lib/modules/$mver /lib/modules/default
fi
fi
if [ -L /lib/modules/default ]; then
INITLOG_ARGS= action $"Finding module dependencies: " depmod -A default
else
INITLOG_ARGS= action $"Finding module dependencies: " depmod -A
fi
fi
# tweak isapnp settings if needed.
if [ -n "$PNP" -a -f /proc/isapnp -a -x /sbin/sndconfig ]; then
/sbin/sndconfig --mungepnp >/dev/null 2>&1
fi
# Load sound modules if and only if they need persistent DMA buffers
if LC_ALL=C grep -q "options sound dmabuf=1" /etc/modules.conf 2>/dev/null ; then
alias=`/sbin/modprobe -c | awk '/^alias sound / { print $3 }'`
if [ -n "$alias" -a "$alias" != "off" ]; then
action $"Loading sound module ($alias): " modprobe sound
fi
alias=`/sbin/modprobe -c | awk '/^alias sound-slot-0 / { print $3 }'`
if [ -n "$alias" -a "$alias" != "off" ]; then
action $"Loading sound module ($alias): " modprobe sound-slot-0
fi
fi
if [ -f /proc/sys/kernel/modprobe ]; then
if [ -n "$USEMODULES" ]; then
sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
sysctl -w kernel.hotplug="/sbin/hotplug" >/dev/null 2>&1
else
# We used to set this to NULL, but that causes 'failed to exec' messages"
sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
sysctl -w kernel.hotplug="/bin/true" >/dev/null 2>&1
fi
fi
# Load modules (for backward compatibility with VARs)
if [ -f /etc/rc.modules ]; then
/etc/rc.modules
fi
update_boot_stage RCraid
if [ -f /etc/raidtab ]; then
# Add raid devices
[ -f /proc/mdstat ] || modprobe md >/dev/null 2>&1
if [ -f /proc/mdstat ]; then
echo -n $"Starting up RAID devices: "
rc=0
for i in `awk '{if ($1=="raiddev") print $2}' /etc/raidtab`
do
RAIDDEV=`basename $i`
RAIDSTAT=`LC_ALL=C grep "^$RAIDDEV : active" /proc/mdstat`
if [ -z "$RAIDSTAT" ]; then
# First scan the /etc/fstab for the "noauto"-flag
# for this device. If found, skip the initialization
# for it to avoid dropping to a shell on errors.
# If not, try raidstart...if that fails then
# fall back to raidadd, raidrun. If that
# also fails, then we drop to a shell
RESULT=1
INFSTAB=`LC_ALL=C grep -c "^$i" /etc/fstab`
if [ $INFSTAB -eq 0 ] ; then
RESULT=0
RAIDDEV="$RAIDDEV(skipped)"
fi
NOAUTO=`LC_ALL=C grep "^$i" /etc/fstab | LC_ALL=C grep -c "noauto"`
if [ $NOAUTO -gt 0 ]; then
RESULT=0
RAIDDEV="$RAIDDEV(skipped)"
fi
if [ $RESULT -gt 0 -a -x /sbin/raidstart ]; then
/sbin/raidstart $i
RESULT=$?
fi
if [ $RESULT -gt 0 -a -x /sbin/raid0run ]; then
/sbin/raid0run $i
RESULT=$?
fi
if [ $RESULT -gt 0 -a -x /sbin/raidadd -a -x /sbin/raidrun ]; then
/sbin/raidadd $i
/sbin/raidrun $i
RESULT=$?
fi
if [ $RESULT -gt 0 ]; then
rc=1
fi
echo -n "$RAIDDEV "
else
echo -n "$RAIDDEV "
fi
done
echo
# A non-zero return means there were problems.
if [ $rc -gt 0 ]; then
echo
echo
echo $"*** An error occurred during the RAID startup"
echo $"*** Dropping you to a shell; the system will reboot"
echo $"*** when you leave the shell."
str=$"(RAID Repair)"
PS1="$str \# # "; export PS1
sulogin
echo $"Unmounting file systems"
umount -a
mount -n -o remount,ro /
echo $"Automatic reboot in progress."
reboot -f
fi
# LVM initialization, take 2 (it could be on top of RAID)
if [ -e /proc/lvm -a -x /sbin/vgchange -a -f /etc/lvmtab ]; then
action $"Setting up Logical Volume Management:" /sbin/vgscan && /sbin/vgchange -a y
fi
fi
fi
if [ -x /sbin/devlabel ]; then
/sbin/devlabel restart
fi
_RUN_QUOTACHECK=0
# Check filesystems
if [ -z "$fastboot" ]; then
STRING=$"Checking filesystems"
echo $STRING
initlog -c "fsck -T -R -A -a $fsckoptions"
rc=$?
if [ "$rc" = "0" ]; then
success "$STRING"
echo
elif [ "$rc" = "1" ]; then
passed "$STRING"
echo
fi
# A return of 2 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 1
fi
failure "$STRING"
echo
echo
echo $"*** An error occurred during the file system check."
echo $"*** Dropping you to a shell; the system will reboot"
echo $"*** when you leave the shell."
str=$"(Repair filesystem)"
PS1="$str \# # "; export PS1
sulogin
echo $"Unmounting file systems"
umount -a
mount -n -o remount,ro /
echo $"Automatic reboot in progress."
reboot -f
elif [ "$rc" = "1" -a -x /sbin/quotacheck ]; then
_RUN_QUOTACHECK=1
fi
fi
# Mount all other filesystems (except for NFS and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
action $"Mounting local filesystems: " mount -a -t nonfs,smbfs,ncpfs -O no_netdev
# check remaining quotas other than root
if [ X"$_RUN_QUOTACHECK" = X1 -a -x /sbin/quotacheck ]; then
if [ -x /sbin/convertquota ]; then
# try to convert old quotas
for mountpt in `awk '$4 ~ /quota/{print $2}' /etc/mtab` ; do
if [ -f "$mountpt/quota.user" ]; then
action $"Converting old user quota files: " \
/sbin/convertquota -u $mountpt && \
rm -f $mountpt/quota.user
fi
if [ -f "$mountpt/quota.group" ]; then
action $"Converting old group quota files: " \
/sbin/convertquota -g $mountpt && \
rm -f $mountpt/quota.group
fi
done
fi
action $"Checking local filesystem quotas: " /sbin/quotacheck -aRnug
fi
if [ -x /sbin/quotaon ]; then
action $"Enabling local filesystem quotas: " /sbin/quotaon -aug
fi
# Configure machine if necessary.
if [ -f /.unconfigured ]; then
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 1
fi
if [ -x /usr/sbin/kbdconfig ]; then
/usr/sbin/kbdconfig
fi
if [ -x /usr/bin/passwd ]; then
/usr/bin/passwd root
fi
if [ -x /usr/sbin/netconfig ]; then
/usr/sbin/netconfig
fi
if [ -x /usr/sbin/timeconfig ]; then
/usr/sbin/timeconfig
fi
if [ -x /usr/sbin/authconfig ]; then
/usr/sbin/authconfig --nostart
fi
if [ -x /usr/sbin/ntsysv ]; then
/usr/sbin/ntsysv --level 35
fi
# Reread in network configuration data.
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
# Reset the hostname.
action $"Resetting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
fi
rm -f /.unconfigured
fi
# Clean out /.
rm -f /fastboot /fsckoptions /forcefsck /.autofsck /halt /poweroff
# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
_NEED_XFILES=
[ -f /var/run/utmpx -o -f /var/log/wtmpx ] && _NEED_XFILES=1
# Clean up /var. I'd use find, but /usr may not be mounted.
for afile in /var/lock/* /var/run/* ; do
if [ -d "$afile" ]; then
case "$afile" in
*/news|*/mon) ;;
*/sudo|*/vmware) rm -f $afile/*/* ;;
*) rm -f $afile/* ;;
esac
else
rm -f $afile
fi
done
rm -f /var/lib/rpm/__db*
# Reset pam_console permissions
[ -x /sbin/pam_console_apply ] && /sbin/pam_console_apply -r
{
# Clean up utmp/wtmp
> /var/run/utmp
touch /var/log/wtmp
chgrp utmp /var/run/utmp /var/log/wtmp
chmod 0664 /var/run/utmp /var/log/wtmp
if [ -n "$_NEED_XFILES" ]; then
> /var/run/utmpx
touch /var/log/wtmpx
chgrp utmp /var/run/utmpx /var/log/wtmpx
chmod 0664 /var/run/utmpx /var/log/wtmpx
fi
# Delete X locks
rm -f /tmp/.X*-lock
# Delete VNC & X locks
rm -rf /tmp/.X*-unix
# Delete ICE locks
rm -rf /tmp/.ICE-unix
# Delete Postgres sockets
rm -f /tmp/.s.PGSQL.*
# Now turn on swap in case we swap to files.
swapon -a
action $"Enabling swap space: " /bin/true
# Initialize the serial ports.
if [ -f /etc/rc.serial ]; then
. /etc/rc.serial
fi
# If a SCSI tape has been detected, load the st module unconditionally
# since many SCSI tapes don't deal well with st being loaded and unloaded
if [ -f /proc/scsi/scsi -a -n "$USEMODULES" ]; then
if LC_ALL=C grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
if LC_ALL=C grep -qv ' 9 st' /proc/devices ; then
modprobe st >/dev/null 2>&1
fi
fi
fi
# Load usb storage here, to match most other things
if [ -n "$needusbstorage" ]; then
modprobe usb-storage >/dev/null 2>&1
fi
# Ooh, firewire too.
if ! strstr "$cmdline" nofirewire ; then
aliases=`/sbin/modprobe -c | awk '/^alias ieee1394-controller/ { print $3 }'`
if [ -n "$aliases" -a "$aliases" != "off" ]; then
for alias in $aliases ; do
[ "$alias" = "off" ] && continue
action $"Initializing firewire controller ($alias): " modprobe $alias
done
LC_ALL=C grep -q "SBP2" /proc/bus/ieee1394/devices 2>/dev/null && \
modprobe sbp2 >/dev/null 2>&1
fi
fi
# If they asked for ide-scsi, load it
if strstr "$cmdline" ide-scsi ; then
modprobe ide-cd >/dev/null 2>&1
modprobe ide-scsi >/dev/null 2>&1
fi
# Turn on harddisk optimization
# There is only one file /etc/sysconfig/harddisks for all disks
# after installing the hdparm-RPM. If you need different hdparm parameters
# for each of your disks, copy /etc/sysconfig/harddisks to
# /etc/sysconfig/harddiskhda (hdb, hdc...) and modify it.
# Each disk which has no special parameters will use the defaults.
# Each non-disk which has no special parameters will be ignored.
#
disk[0]=s;
disk[1]=hda; disk[2]=hdb; disk[3]=hdc; disk[4]=hdd;
disk[5]=hde; disk[6]=hdf; disk[7]=hdg; disk[8]=hdh;
disk[9]=hdi; disk[10]=hdj; disk[11]=hdk; disk[12]=hdl;
disk[13]=hdm; disk[14]=hdn; disk[15]=hdo; disk[16]=hdp;
disk[17]=hdq; disk[18]=hdr; disk[19]=hds; disk[20]=hdt;
if [ -x /sbin/hdparm ]; then
for device in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do
unset MULTIPLE_IO USE_DMA EIDE_32BIT LOOKAHEAD EXTRA_PARAMS
if [ -f /etc/sysconfig/harddisk${disk[$device]} ]; then
. /etc/sysconfig/harddisk${disk[$device]}
HDFLAGS[$device]=
if [ -n "$MULTIPLE_IO" ]; then
HDFLAGS[$device]="-q -m$MULTIPLE_IO"
fi
if [ -n "$USE_DMA" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} -q -d$USE_DMA"
fi
if [ -n "$EIDE_32BIT" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} -q -c$EIDE_32BIT"
fi
if [ -n "$LOOKAHEAD" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} -q -A$LOOKAHEAD"
fi
if [ -n "$EXTRA_PARAMS" ]; then
HDFLAGS[$device]="${HDFLAGS[$device]} $EXTRA_PARAMS"
fi
else
HDFLAGS[$device]="${HDFLAGS[0]}"
fi
if [ -e "/proc/ide/${disk[$device]}/media" ]; then
hdmedia=`cat /proc/ide/${disk[$device]}/media`
if [ "$hdmedia" = "disk" -o -f "/etc/sysconfig/harddisk${disk[$device]}" ]; then
if [ -n "${HDFLAGS[$device]}" ]; then
action $"Setting hard drive parameters for ${disk[$device]}: " /sbin/hdparm ${HDFLAGS[$device]} /dev/${disk[$device]}
fi
fi
fi
done
fi
# Boot time profiles. Yes, this should be somewhere else.
if [ -x /usr/sbin/redhat-config-network-cmd ]; then
if strstr "$cmdline" netprofile= ; then
for arg in $cmdline ; do
if [ "${arg##netprofile=}" != "${arg}" ]; then
/usr/sbin/redhat-config-network-cmd --profile ${arg##netprofile=}
fi
done
fi
fi
# Generate a header that defines the boot kernel.
/sbin/mkkerneldoth
# Adjust symlinks as necessary in /boot to keep system services from
# spewing messages about mismatched System maps and so on.
if [ -L /boot/System.map -a -r /boot/System.map-$unamer -a \
! /boot/System.map -ef /boot/System.map-$unamer ]; then
ln -s -f System.map-$unamer /boot/System.map
fi
if [ ! -e /boot/System.map -a -r /boot/System.map-$unamer ]; then
ln -s -f System.map-$unamer /boot/System.map
fi
# The special Red Hat kernel library symlink must point to the right library
# We need to deal with cases where there is no library, and we need to
# deal with any version numbers that show up.
shopt -s nullglob
for library in /lib/kernel/$unamer/libredhat-kernel.so* ; do
ln -f $library /lib/
ldconfig -n /lib/
done
shopt -u nullglob
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
dmesg -s 131072 > /var/log/dmesg
# Also keep kernel symbols around in case we need them for debugging
i=5
while [ $i -ge 0 ]; do
if [ -f /var/log/ksyms.$i ]; then
chmod 0600 /var/log/ksyms.$i
mv /var/log/ksyms.$i /var/log/ksyms.$(($i+1))
fi
i=$(($i-1))
done
{ date
uname -a
cat /proc/cpuinfo
[ -r /proc/modules ] && cat /proc/modules
[ -r /proc/ksyms ] && cat /proc/ksyms
} > /var/log/ksyms.0
chmod 600 /var/log/ksyms.0
# create the crash indicator flag to warn on crashes, offer fsck with timeout
touch /.autofsck
kill -TERM `/sbin/pidof getkey` >/dev/null 2>&1
} &
if strstr "$cmdline" confirm ; then
touch /var/run/confirm
fi
if [ "$PROMPT" != "no" ]; then
/sbin/getkey i && touch /var/run/confirm
fi
wait
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: INIT: USB FATAL in for Kernel 2.5.xx and 2.6.xx in Redhat v9.0 PLease Read.
2003-07-20 21:10 INIT: USB FATAL in for Kernel 2.5.xx and 2.6.xx in Redhat v9.0 PLease Read Ronald Jerome
@ 2003-07-21 14:31 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2003-07-21 14:31 UTC (permalink / raw)
To: Ronald Jerome; +Cc: linux-kernel
On Sun, Jul 20, 2003 at 02:10:48PM -0700, Ronald Jerome wrote:
>
> One thing I knwo for sure is that in 2.5.xx and 2.6.xx
> kernels there is no usb-uhci.o driver. I believe they
> changes the name and I wonder if this is why I am
> having problems booting the 2.5.xx and 2.6.xx serieis
> kernels?
That is probably your problem :)
Try loading the uhci-hcd module and see if your usb devices now work.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-07-21 14:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-20 21:10 INIT: USB FATAL in for Kernel 2.5.xx and 2.6.xx in Redhat v9.0 PLease Read Ronald Jerome
2003-07-21 14:31 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.