Re: Re: TESTING 2.6.0-test1 S3

[Pavel Machek <pavel-AlSwsSmVLrQ@public.gmane.org>]

Hi!

> > What is L2?
> 
> Toshiba Libretto L2, TM5600 600MHz, 256MB, legacy free, reasonable DSDT.
> 
> The hard disk seems to resume fine with 2.6-test1. (Needs more testing)
> 
> Other than potential harddisk problems, the last problem of "unknown origin" 
> for getting 2.6/S3  to work is that BIOS reports a resume failure every 
> 5 suspends or so. 
> 
> May have seen an oops flash by before it switches off on entering S3, 
> but it could also have been the e100 badness trace. 
> 
> I suspect it is an ACPI related problem in hwsleep.c, by which the suspend
> mechanism is not properly setup. Maybe timing, missing setting, incompatibility...
> 
> Will have to look at the spec and test it more, and expect to resolve this in 
> the end.
> 
> There are right now more complaints about shared PCI interrupts, which is
> a major nuisance aggravated by silly DSDT's sometimes assigning 5 inputs to
> the same level. 
> 
> Reproduced this on the L2 with IRQ5 for Yenta and USB causing hangs
> and crashes but ought to figure the cause out. What is your opinon
> on this?

It does not happen here...
									Pavel
-- 
Horseback riding is like software...
...vgf orggre jura vgf serr.


-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01