From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Joao Vicente" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Problem debugging ppc kernel with DDD/GDB/BDI2000 on a custom MPC8260 board From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Thu, 09 Oct 2003 16:55:04 BST." Date: Thu, 09 Oct 2003 18:18:34 +0200 Message-Id: <20031009161839.6AF46C59E4@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Dear Joao, in message you wrote: > > I am affraid I am still unable to debug the kernel. Just to be sure: did you add "-g" to your CFLAGS_KERNEL definition (in the toplevel Makefile) ? > I am not unsure if this is relevant but this is the method I am using to > build the kernel > > make TQM8260_config Don't use TQM8260_config unless you either have a TQM8260 board or you know _exactly_ what you're doing. > make menuconfig (where I am changing FCC, MDIO and SCC parameters only) Which means your kernel will not work unless you really have a TQM8260 board. > make oldconfig > make dep > make uImage This looks ok to me. > VECTOR CATCH ;catch unhandled exceptions Did you try out nocatch as recommended earlier? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de I've already got a female to worry about. Her name is the Enterprise. -- Kirk, "The Corbomite Maneuver", stardate 1514.0 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/