From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sun, 4 Jan 2004 22:03:35 +0100 To: Benjamin Herrenschmidt Cc: Sven Luther , linuxppc-dev list Subject: Re: multiple separate pci bridges ... Message-ID: <20040104210335.GA858@iliana> References: <20040101181145.GA27294@iliana> <1073016223.1502.179.camel@gaston> <20040102074049.GA2032@iliana> <1073029796.1501.228.camel@gaston> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 In-Reply-To: <1073029796.1501.228.camel@gaston> From: Sven Luther Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hello, I managed to boot into linux, altough i didn't tried yet with a root filesystem, so i don't know if it will work. Still, i get : PCI: Probing PCI hardware Scanning bus 00 Found 00:00 [11ab/6460] 000600 00 Found 00:08 [1106/3044] 000c00 00 Found 00:28 [1000/0001] 000100 00 Found 00:60 [1106/8231] 000601 00 Found 00:61 [1106/0571] 000101 00 Found 00:62 [1106/3038] 000c03 00 Found 00:63 [1106/3038] 000c03 00 Found 00:64 [1106/8235] 000000 00 Found 00:65 [1106/3058] 000401 00 Found 00:66 [1106/3068] 000780 00 Found 00:68 [1106/3065] 000200 00 Fixups for bus 00 Bus scan for 00 returning with max=00 Scanning bus 10 Fixups for bus 10 Bus scan for 10 returning with max=10 PCI: Cannot allocate resource region 4 of device 00:00.0 So, the 0x10 incrementation is fine, but the agp bus is not working correctly, and thus the agp graphic card not recognized (and thus no radeonfb). That said, i believe the 00:00.0 (should that not be 10:00.0 because of the renumbering) is the Marvell Discovery II pci controller, and the actual agp card should be found just behind. Friendly, Sven Luther ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/