From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261973AbUAFM4g (ORCPT ); Tue, 6 Jan 2004 07:56:36 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262030AbUAFM4g (ORCPT ); Tue, 6 Jan 2004 07:56:36 -0500 Received: from cimice4.lam.cz ([212.71.168.94]:4994 "EHLO beton.cybernet.src") by vger.kernel.org with ESMTP id S261973AbUAFM4f (ORCPT ); Tue, 6 Jan 2004 07:56:35 -0500 Date: Tue, 6 Jan 2004 13:56:34 +0100 From: =?iso-8859-2?Q?Karel_Kulhav=FD?= To: linux-kernel@vger.kernel.org Subject: won't work: 2.6.0 && SiI 3112 SATA Message-ID: <20040106135634.A5825@beton.cybernet.src> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i X-Orientation: Gay Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello I try to make Adaptec SATA RAID AAR-1210SA (in fact, SiI 3112 ACT 144 chip) work under 2.6.0 When booting, get "hde: lost interrupt" and DMA errors. Tried to switch on/off local and I/O APIC (singleproc board) and the errors stay the same. Are these errors experienced on all SiI3112 boards? Are they experienced also in 2.4 kernel? Shall I try some "newer" kernel than 2.6.0? What's the difference between SiI3112 and SiI 3114? I found a note about adding some SiI 3114 patch in the 2.6 -mm kernel but don't know if it's relevant for me. Have downloaded the SiI 3112 datasheet but they don't say much about how the registers are configured etc. - just how serial EEPROM is connected (yes, there's an AM29LV0108-903C by AMD on the board) and what SATA commands are supported. Is the programming interface of the chip proprietary or is it covered in SATA, ATA or even PCI spec.? Cl<