From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 10 Feb 2004 23:25:20 +0100 Subject: [U-Boot-Users] (no subject) In-Reply-To: Your message of "Tue, 10 Feb 2004 20:20:09 +0100." <1538.81.227.175.195.1076440809.squirrel@webmail.unisite.se> Message-ID: <20040210222525.5BCD3C1215@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <1538.81.227.175.195.1076440809.squirrel@webmail.unisite.se> you wrote: > > I built u-boot 1.0.1 with the new MontaVista Professional Edition 3.1, Dev > Rocket Environment. It went well and I succeeded to flash the code to a > Motorola Evaluation board ( PQ2FADS-VR ). However, when I tried to debug > the code I started in start.S but after the the first jump bl in start.S I > ended up in a C file that is handling U-boot CLI commands... Can you prove this with a log of the exact steps you performed? > I think that the GDB in BDI2000 is a 5.x version and GDB in the MontaVista > Professional Edition 3.1 is a 6.0 version ( Gcc 3.3.2 ). There is no "GDB in BDI2000". The BDI2000 implements GDB remote protocol over TCP/IP. This protocol is pretty much version independent. > Do you think that this could be a possible issue or is it only me doing > some configuration faults? I guess the later is the case. Best regards, Wolfgang Denk -- See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de What is mind? No matter. What is matter? Never mind. -- Thomas Hewitt Key, 1799-1875