From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000408]: Volume control is chaotic
Date: Wed, 18 Aug 2004 15:32:42 +0200 (CEST) [thread overview]
Message-ID: <20040818133242.A07CA1102F@server.perex-int.cz> (raw)
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000408
======================================================================
Reported By: skamp
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 408
Category: PCI - ice1724
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: LFS 5.1.1, BLFS 5.1
Kernel Version: 2.4.26
======================================================================
Date Submitted: 07-27-2004 18:40 CEST
Last Modified: 08-18-2004 15:32 CEST
======================================================================
Summary: Volume control is chaotic
Description:
Volume control doesn't work properly, with alsa-mixer as well as with
gnome-volume-control. As I figured out that line-out volume was controled
with DAC and DAC1 (how intuitive), I noticed that while sliding the
controls up and down increased and decreased the volume as expected,
modifying the master volume control afterwards made the volume jump to a
much lower level than expected: increasing or decreasing the master volume
even just a little bit makes the overall volume drop, even though it is
not mirrored by the controls.
Thus, setting DAC and DAC1 to 100% while Master was set to 82% resulted in
a quite high volume, but modifying the master volume to 84% or 80%
resulted in the drop. Setting master volume to 60% made the sound very
low, and setting it to 40% made it almost inaudible, until I changed DAC
and DAC1 by 2%.
======================================================================
----------------------------------------------------------------------
skamp - 08-17-2004 04:33 CEST
----------------------------------------------------------------------
Fixed with alsa-* 1.0.6, although the Master control is weird: you only get
full sound when you set Master to 0. Increasing Master decreases overall
volume very fast. This control is basically unusable.
----------------------------------------------------------------------
tiwai - 08-18-2004 13:47 CEST
----------------------------------------------------------------------
Could you try the attached patch?
----------------------------------------------------------------------
skamp - 08-18-2004 15:20 CEST
----------------------------------------------------------------------
patching file pci/ice1712/aureon.c
Hunk https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000001 FAILED at 273.
Hunk https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000002 FAILED at 305.
2 out of 2 hunks FAILED -- saving rejects to file
pci/ice1712/aureon.c.rej
I installed version 1.0.6 when it got out.
----------------------------------------------------------------------
tiwai - 08-18-2004 15:32 CEST
----------------------------------------------------------------------
It's a patch to alsa-kernel tree (in alsa-driver). You'll likely
need to pass an appropriate -p option.
Bug History
Date Modified Username Field Change
======================================================================
07-27-04 18:40 skamp New Bug
07-27-04 18:40 skamp File Added: aadebug
07-27-04 18:40 skamp Distribution => LFS 5.1.1, BLFS 5.1
07-27-04 18:40 skamp Kernel Version => 2.4.26
07-27-04 18:52 skamp Bug Monitored: skamp
08-17-04 04:33 skamp Bugnote Added: 0001571
08-18-04 13:47 tiwai Assigned To => tiwai
08-18-04 13:47 tiwai Status new => assigned
08-18-04 13:47 tiwai Bugnote Added: 0001578
08-18-04 13:48 tiwai File Added: aureon-volfix3.dif
08-18-04 15:20 skamp Bugnote Added: 0001579
08-18-04 15:32 tiwai Bugnote Added: 0001580
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
next reply other threads:[~2004-08-18 13:32 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-18 13:32 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-11-22 13:44 [ALSA - driver 0000408]: Volume control is chaotic bugtrack
2004-10-19 14:30 bugtrack
2004-10-14 19:08 bugtrack
2004-10-13 16:51 bugtrack
2004-10-12 12:37 bugtrack
2004-10-11 10:16 bugtrack
2004-10-09 0:05 bugtrack
2004-10-08 23:21 bugtrack
2004-10-08 10:24 bugtrack
2004-10-08 7:31 bugtrack
2004-10-08 2:01 bugtrack
2004-10-07 19:26 bugtrack
2004-10-07 16:03 bugtrack
2004-10-07 12:43 bugtrack
2004-10-07 7:52 bugtrack
2004-10-06 20:10 bugtrack
2004-08-18 13:41 bugtrack
2004-08-18 13:34 bugtrack
2004-08-18 13:20 bugtrack
2004-08-18 11:47 bugtrack
2004-08-18 11:47 bugtrack
2004-08-17 2:33 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040818133242.A07CA1102F@server.perex-int.cz \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.