Re: PPC & 2.6.0-test3: wrong mem size & hang on ifconfig

[Tom Rini <trini@kernel.crashing.org>]

On Thu, Aug 19, 2004 at 01:48:45PM +0300, Meelis Roos wrote:
> > On Tue, Jan 06, 2004 at 02:00:20PM +0200, Meelis Roos wrote:
> >
> > > > > >  			if (getprop(dev_handle, "reg", mem_info,
> > > > > > -						sizeof(mem_info) != 8))
> > > > > > +						sizeof(mem_info) != 8)) {
> > >
> > > > 	if ((n = getprop(dev_handle, "reg", mem_info, sizeof(mem_info))
> > > > 	!= 8) {
> > >
> > > I tried it (applied it by hand and fixed parens) and it did not print n
> > > and found the right RAM size with todays BK (2.4.24-pre3 by Makefile). I
> > > was confused but did read the patch 3 times. Now I see it - one closing
> > > parenthesis was in the wrong place. Seems you have fixed it in 2.4 tree
> > > already since it's ok in BK.
> > >
> > > So 2.4 is OK again on my Motorola Powerstack II Pro4000 (prep, no
> > > residual, OF present). Thanks! dmesg now tells
> > > Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
> > > Total memory = 64MB; using 128kB for hash table (at c0240000)
> > >
> > > 2.6 probably needs the same fix (current 2.6 is not OK).
> >
> > I hope to get this fixed in 2.6.2 (2.6 lacks the add OF back to PReP
> > bits, and the patch is kinda big).
> 
> Well, now that my Powerstack II boots 2.6 again, I'm missing the
> additional memory - I now have 192M and it only detects 32M :)

Hmm.  Can you change arch/ppc/boot/simple/misc-prep.c so that it will
only try to look in residual data or OF ?  I'm guessing that
mpc10x_get_mem_size() is returning 32MB.

Or does this board not have an MPC105||MPC106 ?

-- 
Tom Rini
http://gate.crashing.org/~trini/