From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 09 Nov 2004 21:07:51 +0100 Subject: [U-Boot-Users] Can I load u-boot to my board? In-Reply-To: Your message of "Mon, 08 Nov 2004 22:28:56 PST." <20041109062856.76466.qmail@web54409.mail.yahoo.com> Message-ID: <20041109200756.DDEE8C1430@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <20041109062856.76466.qmail@web54409.mail.yahoo.com> you wrote: > The board on my hand is SBC8260 from EST corp. The > JTAG comes with this board is VisionProbe II from Actually the JTAG or rather the COP port on the boards is standard. Your VisionProbe tool is a different issue. > I search the web and can not find any tech inforamtion > about this JTAG. No support information on the web for Search again. Ask the vendor. > I use ELDK to build u-boot for sbc8200, but not sure > if it works on this board. Sure it does. Guess what the "sbc8260" board configuration is good for? > Is there any way I can load u-boot to this board? Sure. I could tell you how to do it with a BDI2000. Sorry, never used a VisionProbe ... Best regards, Wolfgang Denk -- See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513 Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Stupidity, like virtue, is its own reward" - William E. Davidsen