From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Tue, 09 Nov 2004 21:15:14 +0100
Subject: [U-Boot-Users] Building U-Boot with GCC3.4.0 
In-Reply-To: Your message of "Tue, 09 Nov 2004 12:10:54 GMT."
             <PKEEJGHDPBIDKDLLBHPIMEHKCCAA.jmcnamara@kimble.ie> 
Message-ID: <20041109201519.87D76C1430@atlas.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <PKEEJGHDPBIDKDLLBHPIMEHKCCAA.jmcnamara@kimble.ie> you wrote:
> 
> I've been able to get U-Boot to build and run successfully using Linux and
> m68k-elf-2.95.3.

That's an ancient toolchain...

> What I'm trying to do now is build U-Boot in Cygwin using m68k-elf-3.4.0.

You're dropping from one extreme into another.

> /home/JimMcNamara/u-boot-1.1.1/cpu/mcf52x2/start.S

And you're using  old  code.  Use  the  top-of-tree  version  in  CVS
instead.

> I've looked at the mail archive and noticed that this problem has been
> mentioned before, however I can't find any solution posted. Can anyone give
> me some pointers on how to resolve the problem??

Please try the current code; if the problem persists, you  will  need
to fix it.

Best regards,

Wolfgang Denk

-- 
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Your own mileage may vary.