From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?Victor_Riquelme_Dur=E1n?= Date: Fri, 06 May 2005 13:27:09 +0000 Subject: (no subject) Message-Id: <20050506132744.064B147C20@ctr.cl> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_001B_01C5521D.C6D5B270" List-Id: References: In-Reply-To: To: linux-hotplug@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_001B_01C5521D.C6D5B270 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, =20 Can you help me, what is It? =20 =20 =20 Victor Riquelme Dur=E1n vriquelme@ctr.cl =20 =20 =20 /var/log/messages =20 =20 May 6 09:14:36 r-matriz wait_for_sysfs[2739]: either wait_for_sysfs = (udev 039) needs an update to handle the device '/class/net/eth5.318' properly = (no device symlink) or the sysfs-support of your device's driver needs to be fixed, please report to =20 May 6 09:14:36 r-matriz wait_for_sysfs[2733]: either wait_for_sysfs = (udev 039) needs an update to handle the device '/class/net/eth4.343' properly = (no device symlink) or the sysfs-support of your device's driver needs to be fixed, please report to linux-hotplug-devel@lists.sourceforge.net =20 =20 =20 =20 [root@r-matriz log]# cat dmesg=20 =20 Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc = version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable) BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. zapping low mappings. On node 0 totalpages: 65472 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61376 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000ff980 ACPI: RSDT (v001 D850MV MV85010A 0x20011114 MSFT 0x00001011) @ = 0x0fff0000 ACPI: FADT (v001 D850MV MV85010A 0x20011114 MSFT 0x00001011) @ = 0x0fff1000 ACPI: MADT (v001 D850MV MV85010A 0x20011114 MSFT 0x00001011) @ = 0x0ffe36ef ACPI: DSDT (v001 D850MV MV85010A 0x00000004 MSFT 0x0100000b) @ = 0x00000000 ACPI: PM-Timer IO Port: 0x408 Built 1 zonelists Kernel command line: ro root=3DLABEL=3D/1 rhgb quiet mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=3D023d5000 soft=3D023d4000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1595.329 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 255176k/261888k available (2068k kernel code, 6092k reserved, = 647k data, 144k init, 0k highmem) Calibrating delay loop... 3145.72 BogoMIPS (lpj=3D1572864) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security = failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 387k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=3D4 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:04:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:04:05.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:04:06.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:04:07.0[A] -> GSI 9 (level, low) -> IRQ 9 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1115370816.277:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6ECDA687281A73E5 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 ACPI: Processor [CPU1] (supports C1) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i850 Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xf8000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with = idebus=3Dxx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD400EB-00CPF0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=3D65535/16/63, = UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Logitech Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices:=20 PBTN PCI1 NEC0 NEC1 NEC2 UAR1 UAR2 USB USB2 AC9 SMB=20 Freeing unused kernel memory: 144k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 280 types, 16 bools security: 53 classes, 5494 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses = genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for = labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-1.667 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sundance.c:v1.01+LK1.09a 10-Jul-2003 Written by Donald Becker http://www.scyld.com/network/sundance.html ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 9 (level, low) -> IRQ 9 divert: allocating divert_blk for eth0 eth0: D-Link DFE-580TX 4 port Server Adapter at 0xbc00, = 00:0d:88:c5:b4:14, IRQ 9. eth0: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth1 eth1: D-Link DFE-580TX 4 port Server Adapter at 0xb880, = 00:0d:88:c5:b4:15, IRQ 11. eth1: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth2 eth2: D-Link DFE-580TX 4 port Server Adapter at 0xb800, = 00:0d:88:c5:b4:16, IRQ 11. eth2: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 10 (level, low) -> IRQ 10 divert: allocating divert_blk for eth3 eth3: D-Link DFE-580TX 4 port Server Adapter at 0xb480, = 00:0d:88:c5:b4:17, IRQ 10. eth3: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:04:04.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth4 eth4: D-Link DFE-580TX 4 port Server Adapter at 0xcc00, = 00:0d:88:c5:b4:24, IRQ 11. eth4: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:04:05.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth5 eth5: D-Link DFE-580TX 4 port Server Adapter at 0xc880, = 00:0d:88:c5:b4:25, IRQ 11. eth5: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:04:06.0[A] -> GSI 10 (level, low) -> IRQ 10 divert: allocating divert_blk for eth6 eth6: D-Link DFE-580TX 4 port Server Adapter at 0xc800, = 00:0d:88:c5:b4:26, IRQ 10. eth6: MII PHY found at address 1, status 0x7829 advertising 01e1. ACPI: PCI interrupt 0000:04:07.0[A] -> GSI 9 (level, low) -> IRQ 9 divert: allocating divert_blk for eth7 eth7: D-Link DFE-580TX 4 port Server Adapter at 0xc480, = 00:0d:88:c5:b4:27, IRQ 9. eth7: MII PHY found at address 1, status 0x7829 advertising 01e1. e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11 divert: allocating divert_blk for eth8 e100: eth8: e100_probe: addr 0xfeaff000, irq 11, MAC addr = 00:03:47:EC:34:60 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49314 usecs intel8x0: clocking to 41136 hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 5, io base 0000ef40 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1f.4: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 10, io base 0000ef80 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 2-2: new full speed USB device using address 2 hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected ACPI: Power Button (FF) [PWRF] EXT3 FS on hda2, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda3, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda5, type ext3), uses xattr Adding 522072k swap on /dev/hda6. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts =20 =20 =20 ------=_NextPart_000_001B_01C5521D.C6D5B270 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hello,

 

Can you help me, what is = It?

 

 

 

Victor Riquelme = Dur=E1n

vriquelme@ctr.cl<= /o:p>

 

 

 

/var/log/messages

 

 

May=A0 6 09:14:36 r-matriz = wait_for_sysfs[2739]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/net/eth5.318' properly (no device symlink) or the sysfs-support = of your device's driver needs to be fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>

 

May=A0 6 09:14:36 r-matriz = wait_for_sysfs[2733]: either wait_for_sysfs (udev 039) needs an update to handle the device = '/class/net/eth4.343' properly (no device symlink) or the sysfs-support of your device's = driver needs to be fixed, please report to linux-hotplug-d= evel@lists.sourceforge.net

 

 

 

 

[root@r-matriz log]# cat dmesg =

 

Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST = 2004

BIOS-provided physical RAM = map:

=A0BIOS-e820: 0000000000000000 = - 000000000009fc00 (usable)

=A0BIOS-e820: 000000000009fc00 - 00000000000a0000 = (reserved)

=A0BIOS-e820: 00000000000e0000 - 0000000000100000 = (reserved)

=A0BIOS-e820: 0000000000100000 - 000000000ffc0000 = (usable)

=A0BIOS-e820: 000000000ffc0000 - 000000000fff8000 = (ACPI data)

=A0BIOS-e820: 000000000fff8000 - 0000000010000000 = (ACPI NVS)

=A0BIOS-e820: 00000000fec00000 - 00000000fec01000 = (reserved)

=A0BIOS-e820: 00000000fee00000 = - 00000000fee01000 (reserved)

=A0BIOS-e820: 00000000ffb80000 - = 00000000ffc00000 (reserved)

=A0BIOS-e820: 00000000fff00000 - = 0000000100000000 (reserved)

0MB HIGHMEM = available.

255MB LOWMEM = available.

zapping low = mappings.

On node 0 totalpages: = 65472

=A0 DMA zone: 4096 pages, LIFO = batch:1

=A0 Normal zone: 61376 pages, LIFO = batch:14

=A0 HighMem zone: 0 pages, LIFO = batch:1

DMI 2.3 present.

ACPI: RSDP (v000 AMI=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ) @ = 0x000ff980

ACPI: RSDT (v001 D850MV MV85010A 0x20011114 = MSFT 0x00001011) @ 0x0fff0000

ACPI: FADT (v001 D850MV MV85010A 0x20011114 = MSFT 0x00001011) @ 0x0fff1000

ACPI: MADT (v001 D850MV MV85010A 0x20011114 = MSFT 0x00001011) @ 0x0ffe36ef

ACPI: DSDT (v001 D850MV MV85010A 0x00000004 = MSFT 0x0100000b) @ 0x00000000

ACPI: PM-Timer IO Port: = 0x408

Built 1 zonelists

Kernel command line: ro root=3DLABEL=3D/1 rhgb = quiet

mapped 4G/4G trampoline to = ffff4000.

Initializing = CPU#0

CPU 0 irqstacks, hard=3D023d5000 = soft=3D023d4000

PID hash table entries: 1024 (order: 10, 16384 = bytes)

Detected 1595.329 MHz = processor.

Using tsc for high-res = timesource

Console: colour VGA+ = 80x25

Dentry cache hash table entries: 65536 (order: = 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: = 5, 131072 bytes)

Memory: 255176k/261888k available (2068k = kernel code, 6092k reserved, 647k data, 144k init, 0k = highmem)

Calibrating delay loop... 3145.72 BogoMIPS = (lpj=3D1572864)

Security Scaffold v1.0.0 = initialized

SELinux:=A0 = Initializing.

SELinux:=A0 Starting in permissive = mode

There is already a security framework = initialized, register_security failed.

selinux_register_security:=A0 Registering = secondary module capability

Capability LSM initialized as = secondary

Mount-cache hash table entries: 512 (order: 0, = 4096 bytes)

CPU: After generic identify, caps: 3febfbff = 00000000 00000000 00000000

CPU: After vendor identify, caps:=A0 3febfbff = 00000000 00000000 00000000

CPU: Trace cache: 12K uops, L1 D cache: = 8K

CPU: L2 cache: = 256K

CPU: After all inits, = caps:=A0=A0=A0=A0=A0=A0=A0 3febf3ff 00000000 00000000 00000080

Intel machine check architecture = supported.

Intel machine check reporting enabled on = CPU#0.

CPU0: Intel P4/Xeon Extended MCE MSRs (12) = available

CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz = stepping 02

Enabling fast FPU save and restore... = done.

Enabling unmasked SIMD FPU exception = support... done.

Checking 'hlt' instruction... = OK.

ACPI: IRQ9 SCI: Level = Trigger.

checking if image is initramfs... it = is

Freeing initrd memory: 387k = freed

NET: Registered protocol family = 16

PCI: PCI BIOS revision 2.10 entry at 0xfda95, = last bus=3D4

PCI: Using configuration type = 1

mtrr: v2.0 = (20020519)

ACPI: Subsystem revision = 20040816

ACPI: Interpreter = enabled

ACPI: Using PIC for interrupt = routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Probing PCI hardware (bus = 00)

PCI: Transparent bridge - = 0000:00:1e.0

ACPI: PCI Interrupt Routing Table = [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]

ACPI: Power Resource [FDDP] = (off)

ACPI: Power Resource [URP1] = (off)

ACPI: Power Resource [URP2] = (off)

ACPI: Power Resource [LPTP] = (off)

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 = 7 9 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 = 7 *9 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 = 7 9 10 11 12 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 = 7 9 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 = 7 9 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 = 7 9 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 = 7 9 10 *11 12 14 15)

ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 = 7 9 *10 11 12 14 15)

Linux Plug and Play Support v0.97 (c) Adam = Belay

usbcore: registered new driver = usbfs

usbcore: registered new driver = hub

PCI: Using ACPI for IRQ = routing

ACPI: PCI Interrupt Link [LNKD] enabled at IRQ = 5

ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI = 5 (level, low) -> IRQ 5

ACPI: PCI Interrupt Link [LNKB] enabled at IRQ = 9

ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI = 9 (level, low) -> IRQ 9

ACPI: PCI Interrupt Link [LNKH] enabled at IRQ = 10

ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI = 10 (level, low) -> IRQ 10

ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI = 9 (level, low) -> IRQ 9

ACPI: PCI Interrupt Link [LNKA] enabled at IRQ = 11

ACPI: PCI interrupt 0000:01:00.0[A] -> GSI = 11 (level, low) -> IRQ 11

ACPI: PCI Interrupt Link [LNKE] enabled at IRQ = 11

ACPI: PCI interrupt 0000:02:08.0[A] -> GSI = 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:03:04.0[A] -> GSI = 9 (level, low) -> IRQ 9

ACPI: PCI Interrupt Link [LNKF] enabled at IRQ = 11

ACPI: PCI interrupt 0000:03:05.0[A] -> GSI = 11 (level, low) -> IRQ 11

ACPI: PCI Interrupt Link [LNKG] enabled at IRQ = 11

ACPI: PCI interrupt 0000:03:06.0[A] -> GSI = 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:03:07.0[A] -> GSI = 10 (level, low) -> IRQ 10

ACPI: PCI interrupt 0000:04:04.0[A] -> GSI = 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:04:05.0[A] -> GSI = 11 (level, low) -> IRQ 11

ACPI: PCI interrupt 0000:04:06.0[A] -> GSI = 10 (level, low) -> IRQ 10

ACPI: PCI interrupt 0000:04:07.0[A] -> GSI = 9 (level, low) -> IRQ 9

apm: BIOS version 1.2 Flags 0x03 (Driver = version 1.16ac)

apm: overridden by = ACPI.

audit: initializing netlink socket = (disabled)

audit(1115370816.277:0): = initialized

Total HugeTLB memory allocated, = 0

VFS: Disk quotas = dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, = 4096 bytes)

SELinux:=A0 Registering netfilter = hooks

Initializing Cryptographic = API

ksign: Installing public key = data

Loading keyring

- Added public key = 6ECDA687281A73E5

- User ID: Red Hat, Inc. (Kernel Module GPG = key)

pci_hotplug: PCI Hot Plug PCI Core version: = 0.5

vesafb: probe of vesafb0 failed with error = -6

ACPI: Processor [CPU1] (supports = C1)

isapnp: Scanning for PnP = cards...

isapnp: No Plug & Play device = found

Real Time Clock Driver = v1.12

Linux agpgart interface v0.100 (c) Dave = Jones

agpgart: Detected an Intel i850 = Chipset.

agpgart: Maximum main memory to use for agp = memory: 203M

agpgart: AGP aperture is 64M @ = 0xf8000000

serio: i8042 AUX port at 0x60,0x64 irq = 12

serio: i8042 KBD port at 0x60,0x64 irq = 1

Serial: 8250/16550 driver $Revision: 1.90 $ 8 = ports, IRQ sharing enabled

ttyS0 at I/O 0x3f8 (irq =3D 4) is a = 16550A

ttyS1 at I/O 0x2f8 (irq =3D 3) is a = 16550A

RAMDISK driver initialized: 16 RAM disks of = 16384K size 1024 blocksize

divert: not allocating divert_blk for = non-ethernet device lo

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO = modes; override with idebus=3Dxx

ICH2: IDE controller at PCI slot = 0000:00:1f.1

ICH2: chipset revision = 4

ICH2: not 100% native mode: will probe irqs = later

=A0=A0=A0 ide0: BM-DMA at 0xffa0-0xffa7, BIOS = settings: hda:DMA, hdb:pio

=A0=A0=A0 ide1: BM-DMA at 0xffa8-0xffaf, BIOS = settings: hdc:DMA, hdd:pio

Probing IDE interface = ide0...

hda: WDC WD400EB-00CPF0, ATA DISK = drive

Using cfq io = scheduler

ide0 at 0x1f0-0x1f7,0x3f6 on irq = 14

Probing IDE interface = ide1...

hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM = drive

ide1 at 0x170-0x177,0x376 on irq = 15

Probing IDE interface = ide2...

ide2: Wait for ready failed before probe = !

Probing IDE interface = ide3...

ide3: Wait for ready failed before probe = !

Probing IDE interface = ide4...

ide4: Wait for ready failed before probe = !

Probing IDE interface = ide5...

ide5: Wait for ready failed before probe = !

hda: max request size: = 128KiB

hda: 78165360 sectors (40020 MB) w/2048KiB = Cache, CHS=3D65535/16/63, UDMA(100)

hda: cache flushes not = supported

=A0hda: hda1 hda2 hda3 hda4 < hda5 hda6 = >

hdc: ATAPI 52X CD-ROM drive, 192kB Cache, = DMA

Uniform CD-ROM driver Revision: = 3.20

ide-floppy driver = 0.99.newide

usbcore: registered new driver = hiddev

usbcore: registered new driver = usbhid

drivers/usb/input/hid-core.c: v2.0:USB HID = core driver

mice: PS/2 mouse device common for all = mice

input: AT Translated Set 2 keyboard on = isa0060/serio0

input: PS/2 Logitech Mouse on = isa0060/serio1

md: md driver 0.90.0 MAX_MD_DEVS=3D256, = MD_SB_DISKS=3D27

NET: Registered protocol family = 2

IP: routing cache hash table of 512 buckets, = 16Kbytes

TCP: Hash tables configured (established 16384 = bind 4681)

Initializing IPsec netlink = socket

NET: Registered protocol family = 1

NET: Registered protocol family = 17

ACPI: (supports S0 S1 S4 = S5)

ACPI wakeup devices: =

PBTN PCI1 NEC0 NEC1 NEC2 UAR1 UAR2=A0 USB = USB2=A0 AC9=A0 SMB

Freeing unused kernel memory: 144k = freed

kjournald starting.=A0 Commit interval 5 = seconds

EXT3-fs: mounted filesystem with ordered data = mode.

security:=A0 3 users, 4 roles, 280 types, 16 = bools

security:=A0 53 classes, 5494 = rules

SELinux:=A0 Completing = initialization.

SELinux:=A0 Setting up existing = superblocks.

SELinux: initialized (dev hda2, type ext3), = uses xattr

SELinux: initialized (dev tmpfs, type tmpfs), = uses transition SIDs

SELinux: initialized (dev selinuxfs, type = selinuxfs), uses genfs_contexts

SELinux: initialized (dev mqueue, type = mqueue), not configured for labeling

SELinux: initialized (dev hugetlbfs, type = hugetlbfs), not configured for labeling

SELinux: initialized (dev devpts, type = devpts), uses transition SIDs

SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts

SELinux: initialized (dev pipefs, type = pipefs), uses task SIDs

SELinux: initialized (dev tmpfs, type tmpfs), = uses transition SIDs

SELinux: initialized (dev futexfs, type = futexfs), uses genfs_contexts

SELinux: initialized (dev sockfs, type = sockfs), uses task SIDs

SELinux: initialized (dev proc, type proc), = uses genfs_contexts

SELinux: initialized (dev bdev, type bdev), = uses genfs_contexts

SELinux: initialized (dev rootfs, type = rootfs), uses genfs_contexts

SELinux: initialized (dev sysfs, type sysfs), = uses genfs_contexts

SELinux: initialized (dev usbfs, type usbfs), = uses genfs_contexts

inserting floppy driver for = 2.6.9-1.667

Floppy drive(s): fd0 is = 1.44M

FDC 0 is a post-1991 = 82077

sundance.c:v1.01+LK1.09a 10-Jul-2003=A0 = Written by Donald Becker

=A0 = http://www.scyld.com/network/sundance.html

ACPI: PCI interrupt 0000:03:04.0[A] -> GSI = 9 (level, low) -> IRQ 9

divert: allocating divert_blk for = eth0

eth0: D-Link DFE-580TX 4 port Server Adapter = at 0xbc00, 00:0d:88:c5:b4:14, IRQ 9.

eth0: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:03:05.0[A] -> GSI = 11 (level, low) -> IRQ 11

divert: allocating divert_blk for = eth1

eth1: D-Link DFE-580TX 4 port Server Adapter = at 0xb880, 00:0d:88:c5:b4:15, IRQ 11.

eth1: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:03:06.0[A] -> GSI = 11 (level, low) -> IRQ 11

divert: allocating divert_blk for = eth2

eth2: D-Link DFE-580TX 4 port Server Adapter = at 0xb800, 00:0d:88:c5:b4:16, IRQ 11.

eth2: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:03:07.0[A] -> GSI = 10 (level, low) -> IRQ 10

divert: allocating divert_blk for = eth3

eth3: D-Link DFE-580TX 4 port Server Adapter = at 0xb480, 00:0d:88:c5:b4:17, IRQ 10.

eth3: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:04:04.0[A] -> GSI = 11 (level, low) -> IRQ 11

divert: allocating divert_blk for = eth4

eth4: D-Link DFE-580TX 4 port Server Adapter = at 0xcc00, 00:0d:88:c5:b4:24, IRQ 11.

eth4: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:04:05.0[A] -> GSI = 11 (level, low) -> IRQ 11

divert: allocating divert_blk for = eth5

eth5: D-Link DFE-580TX 4 port Server Adapter = at 0xc880, 00:0d:88:c5:b4:25, IRQ 11.

eth5: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:04:06.0[A] -> GSI = 10 (level, low) -> IRQ 10

divert: allocating divert_blk for = eth6

eth6: D-Link DFE-580TX 4 port Server Adapter = at 0xc800, 00:0d:88:c5:b4:26, IRQ 10.

eth6: MII PHY found at address 1, status = 0x7829 advertising 01e1.

ACPI: PCI interrupt 0000:04:07.0[A] -> GSI = 9 (level, low) -> IRQ 9

divert: allocating divert_blk for = eth7

eth7: D-Link DFE-580TX 4 port Server Adapter = at 0xc480, 00:0d:88:c5:b4:27, IRQ 9.

eth7: MII PHY found at address 1, status = 0x7829 advertising 01e1.

e100: Intel(R) PRO/100 Network Driver, = 3.0.27-k2-NAPI

e100: Copyright(c) 1999-2004 Intel = Corporation

ACPI: PCI interrupt 0000:02:08.0[A] -> GSI = 11 (level, low) -> IRQ 11

divert: allocating divert_blk for = eth8

e100: eth8: e100_probe: addr 0xfeaff000, irq = 11, MAC addr 00:03:47:EC:34:60

ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI = 9 (level, low) -> IRQ 9

PCI: Setting latency timer of device = 0000:00:1f.5 to 64

intel8x0_measure_ac97_clock: measured 49314 = usecs

intel8x0: clocking to = 41136

hw_random hardware driver 1.0.0 = loaded

USB Universal Host Controller Interface driver = v2.2

ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI = 5 (level, low) -> IRQ 5

uhci_hcd 0000:00:1f.2: UHCI Host = Controller

PCI: Setting latency timer of device = 0000:00:1f.2 to 64

uhci_hcd 0000:00:1f.2: irq 5, io base = 0000ef40

SELinux: initialized (dev usbdevfs, type = usbdevfs), uses genfs_contexts

uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub = found

hub 1-0:1.0: 2 ports = detected

ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI = 10 (level, low) -> IRQ 10

uhci_hcd 0000:00:1f.4: UHCI Host = Controller

PCI: Setting latency timer of device = 0000:00:1f.4 to 64

uhci_hcd 0000:00:1f.4: irq 10, io base = 0000ef80

uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2

hub 2-0:1.0: USB hub = found

hub 2-0:1.0: 2 ports = detected

md: Autodetecting RAID = arrays.

md: autorun ...

md: ... autorun = DONE.

usb 2-2: new full speed USB device using = address 2

hub 2-2:1.0: USB hub = found

hub 2-2:1.0: 4 ports = detected

ACPI: Power Button (FF) = [PWRF]

EXT3 FS on hda2, internal = journal

device-mapper: 4.1.0-ioctl (2003-12-10) = initialised: dm@uk.sistina.com

cdrom: open = failed.

kjournald starting.=A0 Commit interval 5 = seconds

EXT3 FS on hda1, internal = journal

EXT3-fs: mounted filesystem with ordered data = mode.

SELinux: initialized (dev hda1, type ext3), = uses xattr

SELinux: initialized (dev tmpfs, type tmpfs), = uses transition SIDs

kjournald starting.=A0 Commit interval 5 = seconds

EXT3 FS on hda3, internal = journal

EXT3-fs: mounted filesystem with ordered data = mode.

SELinux: initialized (dev hda3, type ext3), = uses xattr

kjournald starting.=A0 Commit interval 5 = seconds

EXT3 FS on hda5, internal = journal

EXT3-fs: mounted filesystem with ordered data = mode.

SELinux: initialized (dev hda5, type ext3), = uses xattr

Adding 522072k swap on /dev/hda6.=A0 = Priority:-1 extents:1

SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

 

 

 

------=_NextPart_000_001B_01C5521D.C6D5B270-- ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click _______________________________________________ Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net Linux-hotplug-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel