From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Wed, 11 May 2005 09:56:47 +0200
Subject: [U-Boot-Users] (no subject) 
In-Reply-To: Your message of "Wed, 11 May 2005 14:12:29 +0800."
             <200505111412.AA28574024@RCS-9000.COM> 
Message-ID: <20050511075652.561B9C1512@atlas.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <200505111412.AA28574024@RCS-9000.COM> you wrote:
> When I fire up the board,the U-boot reports are as follows:
...
> U-Boot 1.1.2 (May 10 2005 - 08:54:34)                                     
> 
> CPU:   MPC5200 v1.2 at 396 MHz                              
>        Bus 132 MHz, IPB 66 MHz, PCI 33 MHz                                          
> Board: Motorola MPC5200 (IceCube)                                 
> I2C:   85 kHz, ready                    
> DRAM:  32 MB            
> FLASH:  0 kB            
^^^^^^^^^^^^^^
Problem here

> **********************************************************
> Is it ok? What's the problem on "FLASH:  0 kB            
> *** Warning - bad CRC, using default environment     "?
> It can not find my flash on board?

Correct. Seems you don't have an IceCube (aka  Lite5200)  board.  You
will have to port U-Boot to your hartware.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
... bacteriological warfare ... hard to believe we were once foolish
enough to play around with that.
	-- McCoy, "The Omega Glory", stardate unknown