From mboxrd@z Thu Jan 1 00:00:00 1970 From: hidden@paradise.net.nz (Volker Kuhlmann) Date: Mon, 12 Dec 2005 23:37:54 +0000 Subject: [lm-sensors] lm_sensors and nvidia graphic card temperature Message-Id: <20051212233754.GD6589@paradise.net.nz> List-Id: References: <20051212191628.14d6ea0c.khali@linux-fr.org> In-Reply-To: <20051212191628.14d6ea0c.khali@linux-fr.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org > i2c-nvidia2 doesn't exist as far as I know. You must refer to > i2c-nforce2, I presume? Yes, sorry. > Search for rivatv instead - see my other post. Yes, very informative, thanks! The 0.86 release doesn't compile, but the cvs one does. The module loads fine, syslog: kernel: Linux video capture interface: v1.00 kernel: rivatv: module not supported by Novell, setting U taint flag. kernel: rivatv: Video4Linux driver for NVIDIA cards kernel: rivatv: MMX processor extension enabled > Rudolf's w83785 driver is meant for the Winbond W83L785R chips, which > is a full-featured hardware monitoring chip. My w83l785ts driver, OTOH, > is meant for the Winbond W83L785TS-S, which is a very simple > single-temperature sensor. Thanks for the clarification. I can't get modprobe w83l785ts with various probe= and force= options to do anything useful. Loading i2c-nforce2 makes two i2c busesses avilable, numbered 0 and 1. Presumably something similar would have to happen if the graphics card has an i2c bus too? Dunno how though. :( I've insmoded all /lib/modules/2.6.13-15.7-default/kernel/drivers/i2c/busses/* ignoring the errors, and rivafb and rivatv, sensors-detect finds a lot more but it's all bogus. sensors -s (with the original sensors.conf), then sensors outputs only zeros for anything that wasn't there before. Might have to give up. :(( Thanks again for all your insights. Volker -- Volker Kuhlmann is possibly list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me.