From mboxrd@z Thu Jan 1 00:00:00 1970 From: Olaf Hering Subject: pata_sl82c105 can not reserve IO region Date: Thu, 30 Nov 2006 17:52:02 +0100 (MET) Message-ID: <20061130165202.GA23205@aepfle.de> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="ew6BAiZeqk4r7MaW" Return-path: Received: from mo-p07-ob.rzone.de ([81.169.146.188]:35409 "EHLO mo-p07-ob.rzone.de") by vger.kernel.org with ESMTP id S1759275AbWK3QxC (ORCPT ); Thu, 30 Nov 2006 11:53:02 -0500 Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org, linuxppc-dev@ozlabs.org --ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=utf-8 Content-Disposition: inline pata_sl82c105 can be used on the ppc64 POWER4 system p610, p615 and p630 for the onboard IDE CD drive. It could be also used for ppc32 Motorola PowerStack PReP systems. Unfortunately, it doesnt work for me on the p630: PCI: Enabling device: (0000:00:03.1), cmd 141 PCI: Unable to reserve I/O region #6:10@0 for device 0000:00:03.1 pata_sl82c105: probe of 0000:00:03.1 failed with error -16 Any idea how to fix it properly? dmesg and other info attached. --ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="winbond-ide.txt" Using pSeries machine description Page orders: linear mapping = 24, virtual = 12, io = 12 Found legacy serial port 0 for /pci@400000000110/isa@3/serial@i3f8 port=3f8, taddr=3fd300003f8, irq=0, clk=1843200, speed=0 Found legacy serial port 1 for /pci@400000000110/isa@3/serial@i2f8 port=2f8, taddr=3fd300002f8, irq=0, clk=1843200, speed=0 Found legacy serial port 2 for /pci@400000000110/isa@3/serial@i898 port=898, taddr=3fd30000898, irq=0, clk=1843200, speed=0 Starting Linux PPC64 #7 SMP Thu Nov 30 15:59:33 CET 2006 ----------------------------------------------------- ppc64_pft_size = 0x0 physicalMemorySize = 0x200000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc0000001f0000000 htab_hash_mask = 0xfffff ----------------------------------------------------- Linux version 2.6.19-ppc64-bug159235 (olaf@pomegranate) (gcc version 4.1.0 (SUSE Linux)) #7 SMP Thu Nov 30 15:59:33 CET 2006 [boot]0012 Setup Arch Entering add_active_range(0, 0, 2097152) 0 entries of 256 used No ramdisk, default root is /dev/sda2 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 81920 bytes Using default idle loop Top of RAM: 0x200000000, Total RAM: 0x200000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 2097152 Normal 2097152 -> 2097152 early_node_map[1] active PFN ranges 0: 0 -> 2097152 On node 0 totalpages: 2097152 DMA zone: 28672 pages used for memmap DMA zone: 0 pages reserved DMA zone: 2068480 pages, LIFO batch:31 Normal zone: 0 pages used for memmap [boot]0015 Setup Done Built 1 zonelists. Total pages: 2068480 Kernel command line: debug video=matroxfb:1280x1024@85 sysrq=1 panic=32 root=/dev/sdb2 [boot]0020 XICS Init xics: PCI 8259 intack at 0x000003fffdf091f0 i8259 legacy interrupt controller initialized [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 32768 bytes) time_init: decrementer frequency = 181.701290 MHz time_init: processor frequency = 1453.000000 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 8102896k/8388608k available (3508k kernel code, 284972k reserved, 1072k data, 2273k bss, 180k init) Calibrating delay loop... 362.90 BogoMIPS (lpj=1814528) Mount-cache hash table entries: 256 Processor 1 found. Processor 2 found. Processor 3 found. Brought up 4 CPUs migration_cost=0 NET: Registered protocol family 16 PCI: Probing PCI hardware Failed to request PCI IO region on PCI domain 0000 Using INTC for W82c105 IDE controller. IOMMU table initialized, virtual merging enabled ISA bridge at 0000:00:03.0 mapping IO 3fd30000000 -> d000080000000000, size: 100000 mapping IO 3fd50000000 -> d000080000100000, size: 100000 PCI: Probing PCI hardware done SCSI subsystem initialized NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 1048576 (order: 12, 16777216 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 1048576 bind 65536) TCP reno registered RTAS daemon started RTAS: event: 188, Type: Internal Device Failure, Severity: 2 io scheduler noop registered (default) matroxfb: Matrox G450 detected PInS data found at offset 31168 PInS memtype = 4 matroxfb: 1280x1024x8bpp (virtual: 1280x13107) matroxfb: framebuffer at 0x3FDEC000000, mapped to 0xd000080080009000, size 16777216 Console: switching to colour frame buffer device 160x64 fb0: MATROX frame buffer device matroxfb_crtc2: secondary head of fb0 was registered as fb1 Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250.0: ttyS2 at I/O 0x898 (irq = 10) is a 16550A loop: loaded (max 8 devices) e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation PCI: Enabling device: (0000:21:01.0), cmd 143 e100: eth0: e100_probe: addr 0x3fd88030000, irq 85, MAC addr 00:02:55:4F:05:C7 PCI: Enabling device: (0001:21:01.0), cmd 143 e100: eth1: e100_probe: addr 0x3fde8030000, irq 117, MAC addr 00:02:55:4F:05:D7 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller at PCI slot 0000:00:03.1 PCI: Enabling device: (0000:00:03.1), cmd 141 W82C105: chipset revision 5 W82C105: 100% native mode on irq 86 ide0: BM-DMA at 0xf040-0xf047, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf048-0xf04f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive hda: selected PIO 4 (120ns) (0240) ide0 at 0xf000-0xf007,0xf012 on irq 86 Probing IDE interface ide1... hda: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 PCI: Enabling device: (0000:41:01.0), cmd 143 sym0: <1010-66> rev 0x1 at pci 0000:41:01.0 irq 87 sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 scsi 0:0:8:0: Direct-Access IBM IC35L036UCD210-0 S5BS PQ: 0 ANSI: 3 target0:0:8: tagged command queuing enabled, command queue depth 16. target0:0:8: Beginning Domain Validation target0:0:8: asynchronous target0:0:8: wide asynchronous target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:8: Ending Domain Validation scsi 0:0:9:0: Direct-Access IBM IC35L036UCD210-0 S5BS PQ: 0 ANSI: 3 target0:0:9: tagged command queuing enabled, command queue depth 16. target0:0:9: Beginning Domain Validation target0:0:9: asynchronous target0:0:9: wide asynchronous target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:9: Ending Domain Validation scsi 0:0:15:0: Enclosure IBM HSBPD4E PU3SCSI 0011 PQ: 0 ANSI: 2 target0:0:15: Beginning Domain Validation scsi 0:0:15:0: phase change 6-7 6@40000fa0 resid=4. target0:0:15: asynchronous target0:0:15: Ending Domain Validation PCI: Enabling device: (0000:41:01.1), cmd 143 sym1: <1010-66> rev 0x1 at pci 0000:41:01.1 irq 88 sym1: No NVRAM, ID 7, Fast-80, SE, parity checking sym1: SCSI BUS has been reset. scsi1 : sym-2.2.3 target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) scsi 1:0:0:0: Sequential-Access HP IBM-C568303030!D C209 PQ: 0 ANSI: 2 target1:0:0: Beginning Domain Validation target1:0:0: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 31) target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target1:0:0: Domain Validation skipping write tests target1:0:0: Ending Domain Validation SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write through SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:0:8:0: Attached scsi disk sda SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: drive cache: write through SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: drive cache: write through sdb: sdb1 sdb2 sd 0:0:9:0: Attached scsi disk sdb sd 0:0:8:0: Attached scsi generic sg0 type 0 sd 0:0:9:0: Attached scsi generic sg1 type 0 scsi 0:0:15:0: Attached scsi generic sg2 type 13 scsi 1:0:0:0: Attached scsi generic sg3 type 1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: AT Raw Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse as /class/input/input1 ReiserFS: sdb2: found reiserfs format "3.6" with standard journal ReiserFS: sdb2: using ordered data mode ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb2: checking transaction log (sdb2) ReiserFS: sdb2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 180k freed ioctl32(showconsole:353): Unknown cmd fd(0) cmd(40045432){00} arg(ffda1b38) on /dev/console ioctl32(showconsole:388): Unknown cmd fd(0) cmd(40045432){00} arg(fff67ac8) on /dev/console ReiserFS: sdb2: warning: acl not supported. ReiserFS: sdb2: warning: user_xattr not supported. ReiserFS: sdb2: warning: acl not supported. ReiserFS: sdb2: warning: user_xattr not supported. ioctl32(showconsole:958): Unknown cmd fd(0) cmd(40045432){00} arg(ff8fdac8) on /dev/console ioctl32(showconsole:1130): Unknown cmd fd(0) cmd(40045432){00} arg(ff997ad8) on /dev/console Adding 1048568k swap on /dev/sda2. Priority:-1 extents:1 across:1048568k ioctl32(showconsole:1217): Unknown cmd fd(0) cmd(40045432){00} arg(ffe01b18) on /dev/console e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex ioctl32(showconsole:2448): Unknown cmd fd(0) cmd(40045432){00} arg(ff821a78) on /dev/tty0 ISO 9660 Extensions: RRIP_1991A ==> /proc/ide <== ==> /proc/interrupts <== CPU0 CPU1 CPU2 CPU3 1: 3 2 4 3 i8259 Level i8042 12: 28 28 27 26 i8259 Level i8042 16: 442 666 574 337 XICS Level IPI 86: 269 255 236 255 XICS Level ide0 87: 2243 2234 2260 2218 XICS Level sym53c8xx 88: 13 14 13 13 XICS Level sym53c8xx 117: 1714 1736 1727 1752 XICS Level eth2 BAD: 0 ==> /proc/iomem <== 3fcc0000000-3fcc00fffff : PCI Bus #61 3fcc0000000-3fcc00fffff : PCI Bus #41 3fcc0000000-3fcc00fffff : PCI Bus #21 3fcc0000000-3fcc00fffff : PCI Bus #01 3fcc0000000-3fcc0007fff : 0000:00:02.6 3fcc0000000-3fcc0007fff : 0000:00:02.4 3fcc0000000-3fcc0007fff : 0000:00:02.2 3fd00000000-3fd000fffff : PCI Bus #61 3fd00000000-3fd000fffff : PCI Bus #21 3fd00000000-3fd000fffff : PCI Bus #01 3fd00000000-3fd00007fff : 0001:00:02.6 3fd00000000-3fd00007fff : 0001:00:02.2 3fd80000000-3fdbfffffff : /pci@400000000110 3fd80000000-3fd87ffffff : PCI Bus #01 3fd88000000-3fd8bffffff : PCI Bus #21 3fd88000000-3fd8801ffff : 0000:21:01.0 3fd88000000-3fd8801ffff : e100 3fd88020000-3fd8802ffff : 0000:21:01.0 3fd88030000-3fd88030fff : 0000:21:01.0 3fd88030000-3fd88030fff : e100 3fd8c000000-3fd8fffffff : PCI Bus #41 3fd8c000000-3fd8c001fff : 0000:41:01.1 3fd8c000000-3fd8c001fff : sym53c8xx 3fd8c002000-3fd8c003fff : 0000:41:01.0 3fd8c002000-3fd8c003fff : sym53c8xx 3fd8c004000-3fd8c0043ff : 0000:41:01.1 3fd8c004000-3fd8c0043ff : sym53c8xx 3fd8c005000-3fd8c0053ff : 0000:41:01.0 3fd8c005000-3fd8c0053ff : sym53c8xx 3fd90000000-3fd97ffffff : PCI Bus #61 3fd90000000-3fd90003fff : 0000:61:01.0 3fd9fff0000-3fd9fff7fff : 0000:00:02.0 3fdb4000000-3fdb7ffffff : 0000:00:01.0 3fdb8000000-3fdbbffffff : 0000:00:01.0 3fdbd700000-3fdbd700fff : 0000:00:01.0 3fdbd800000-3fdbd87ffff : 0000:00:01.0 3fde0000000-3fdffffffff : /pci@400000000112 3fde0000000-3fde7ffffff : PCI Bus #01 3fde0000000-3fde0000fff : 0001:01:01.3 3fde0001000-3fde0001fff : 0001:01:01.2 3fde0002000-3fde0002fff : 0001:01:01.1 3fde0003000-3fde0003fff : 0001:01:01.0 3fde8000000-3fdebffffff : PCI Bus #21 3fde8000000-3fde801ffff : 0001:21:01.0 3fde8000000-3fde801ffff : e100 3fde8020000-3fde802ffff : 0001:21:01.0 3fde8030000-3fde8030fff : 0001:21:01.0 3fde8030000-3fde8030fff : e100 3fdec000000-3fdf3ffffff : PCI Bus #61 3fdec000000-3fdef0fffff : PCI Bus #62 3fdec000000-3fdedffffff : 0001:62:00.0 3fdec000000-3fdedffffff : matroxfb FB 3fdee000000-3fdee7fffff : 0001:62:00.0 3fdee800000-3fdee803fff : 0001:62:00.0 3fdee800000-3fdee803fff : matroxfb MMIO 3fdef000000-3fdef01ffff : 0001:62:00.0 3fdffff0000-3fdffff7fff : 0001:00:02.0 ==> /proc/ioports <== 00000000-0000001f : dma1 00000020-00000021 : 8259 (master) 00000040-0000005f : timer 00000060-0000006f : i8042 00000080-0000008f : dma page reg 000000a0-000000a1 : 8259 (slave) 000000c0-000000df : dma2 000002f8-000002ff : serial 000003c0-000003df : matrox 000003f8-000003ff : serial 000004d0-000004d1 : 8259 edge control 00000898-0000089f : serial 0000f000-0000f007 : 0000:00:03.1 0000f000-0000f007 : ide0 0000f010-0000f013 : 0000:00:03.1 0000f012-0000f012 : ide0 0000f020-0000f027 : 0000:00:03.1 0000f030-0000f033 : 0000:00:03.1 0000f040-0000f04f : 0000:00:03.1 0000f040-0000f047 : ide0 0000f048-0000f04f : ide1 00010000-0001ffff : PCI Bus #01 00020000-0002ffff : PCI Bus #21 0002ec00-0002ec3f : 0000:21:01.0 0002ec00-0002ec3f : e100 00030000-0003ffff : PCI Bus #41 0003e800-0003e8ff : 0000:41:01.0 0003e800-0003e8ff : sym53c8xx 0003ec00-0003ecff : 0000:41:01.1 0003ec00-0003ecff : sym53c8xx 00040000-0004ffff : PCI Bus #61 00100000-001fffff : /pci@400000000112 00100000-0010ffff : PCI Bus #01 00110000-0011ffff : PCI Bus #21 0011ec00-0011ec3f : 0001:21:01.0 0011ec00-0011ec3f : e100 00120000-0012ffff : PCI Bus #61 ==> /proc/irq <== 00:01.0 Co-processor: IBM Unknown device 00e0 (rev 01) (prog-if ff) Subsystem: IBM Unknown device 00e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset+ FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.0 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit- 133MHz- SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.2 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.4 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.6 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:03.0 ISA bridge: Symphony Labs W83C553 (rev 10) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:02.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit- 133MHz- SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:02.2 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:02.6 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 0001:01:01.0 USB Controller: Agere Systems USS-344S USB Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Agere Systems USS-344S USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] #06 [0000] Capabilities: [a0] Vital Product Data 0001:62:00.0 VGA compatible controller: Matrox Graphics, Inc. G400/G450 (rev 82) (prog-if 00 [VGA]) Subsystem: IBM Unknown device 0233 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- --ew6BAiZeqk4r7MaW Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="winbond-libata.txt" Using pSeries machine description Page orders: linear mapping = 24, virtual = 12, io = 12 Found legacy serial port 0 for /pci@400000000110/isa@3/serial@i3f8 port=3f8, taddr=3fd300003f8, irq=0, clk=1843200, speed=0 Found legacy serial port 1 for /pci@400000000110/isa@3/serial@i2f8 port=2f8, taddr=3fd300002f8, irq=0, clk=1843200, speed=0 Found legacy serial port 2 for /pci@400000000110/isa@3/serial@i898 port=898, taddr=3fd30000898, irq=0, clk=1843200, speed=0 Starting Linux PPC64 #8 SMP Thu Nov 30 17:33:10 CET 2006 ----------------------------------------------------- ppc64_pft_size = 0x0 physicalMemorySize = 0x200000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc0000001f0000000 htab_hash_mask = 0xfffff ----------------------------------------------------- Linux version 2.6.19-ppc64-bug159235 (olaf@pomegranate) (gcc version 4.1.0 (SUSE Linux)) #8 SMP Thu Nov 30 17:33:10 CET 2006 [boot]0012 Setup Arch Entering add_active_range(0, 0, 2097152) 0 entries of 256 used No ramdisk, default root is /dev/sda2 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 81920 bytes Using default idle loop Top of RAM: 0x200000000, Total RAM: 0x200000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 2097152 Normal 2097152 -> 2097152 early_node_map[1] active PFN ranges 0: 0 -> 2097152 On node 0 totalpages: 2097152 DMA zone: 28672 pages used for memmap DMA zone: 0 pages reserved DMA zone: 2068480 pages, LIFO batch:31 Normal zone: 0 pages used for memmap [boot]0015 Setup Done Built 1 zonelists. Total pages: 2068480 Kernel command line: debug video=matroxfb:1280x1024@85 sysrq=1 panic=32 root=/dev/sdb2 [boot]0020 XICS Init xics: PCI 8259 intack at 0x000003fffdf091f0 i8259 legacy interrupt controller initialized [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 32768 bytes) time_init: decrementer frequency = 181.701788 MHz time_init: processor frequency = 1453.000000 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 8103028k/8388608k available (3476k kernel code, 284888k reserved, 1060k data, 2236k bss, 176k init) Calibrating delay loop... 362.90 BogoMIPS (lpj=1814528) Mount-cache hash table entries: 256 Processor 1 found. Processor 2 found. Processor 3 found. Brought up 4 CPUs migration_cost=0 NET: Registered protocol family 16 PCI: Probing PCI hardware Failed to request PCI IO region on PCI domain 0000 Using INTC for W82c105 IDE controller. IOMMU table initialized, virtual merging enabled ISA bridge at 0000:00:03.0 mapping IO 3fd30000000 -> d000080000000000, size: 100000 mapping IO 3fd50000000 -> d000080000100000, size: 100000 PCI: Probing PCI hardware done SCSI subsystem initialized libata version 2.00 loaded. NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 1048576 (order: 12, 16777216 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 1048576 bind 65536) TCP reno registered RTAS daemon started RTAS: event: 188, Type: Internal Device Failure, Severity: 2 io scheduler noop registered (default) matroxfb: Matrox G450 detected PInS data found at offset 31168 PInS memtype = 4 matroxfb: 1280x1024x8bpp (virtual: 1280x13107) matroxfb: framebuffer at 0x3FDEC000000, mapped to 0xd000080080009000, size 16777216 Console: switching to colour frame buffer device 160x64 fb0: MATROX frame buffer device matroxfb_crtc2: secondary head of fb0 was registered as fb1 Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250.0: ttyS2 at I/O 0x898 (irq = 10) is a 16550A loop: loaded (max 8 devices) e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation PCI: Enabling device: (0000:21:01.0), cmd 143 e100: eth0: e100_probe: addr 0x3fd88030000, irq 85, MAC addr 00:02:55:4F:05:C7 PCI: Enabling device: (0001:21:01.0), cmd 143 e100: eth1: e100_probe: addr 0x3fde8030000, irq 117, MAC addr 00:02:55:4F:05:D7 PCI: Enabling device: (0000:41:01.0), cmd 143 sym0: <1010-66> rev 0x1 at pci 0000:41:01.0 irq 87 sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 scsi 0:0:8:0: Direct-Access IBM IC35L036UCD210-0 S5BS PQ: 0 ANSI: 3 target0:0:8: tagged command queuing enabled, command queue depth 16. target0:0:8: Beginning Domain Validation target0:0:8: asynchronous target0:0:8: wide asynchronous target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:8: Ending Domain Validation scsi 0:0:9:0: Direct-Access IBM IC35L036UCD210-0 S5BS PQ: 0 ANSI: 3 target0:0:9: tagged command queuing enabled, command queue depth 16. target0:0:9: Beginning Domain Validation target0:0:9: asynchronous target0:0:9: wide asynchronous target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:9: Ending Domain Validation scsi 0:0:15:0: Enclosure IBM HSBPD4E PU3SCSI 0011 PQ: 0 ANSI: 2 target0:0:15: Beginning Domain Validation scsi 0:0:15:0: phase change 6-7 6@40000fa0 resid=4. target0:0:15: asynchronous target0:0:15: Ending Domain Validation PCI: Enabling device: (0000:41:01.1), cmd 143 sym1: <1010-66> rev 0x1 at pci 0000:41:01.1 irq 88 sym1: No NVRAM, ID 7, Fast-80, SE, parity checking sym1: SCSI BUS has been reset. scsi1 : sym-2.2.3 target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) scsi 1:0:0:0: Sequential-Access HP IBM-C568303030!D C209 PQ: 0 ANSI: 2 target1:0:0: Beginning Domain Validation target1:0:0: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 31) target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target1:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target1:0:0: Domain Validation skipping write tests target1:0:0: Ending Domain Validation SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write through SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:0:8:0: Attached scsi disk sda SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: drive cache: write through SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: drive cache: write through sdb: sdb1 sdb2 sd 0:0:9:0: Attached scsi disk sdb sd 0:0:8:0: Attached scsi generic sg0 type 0 sd 0:0:9:0: Attached scsi generic sg1 type 0 scsi 0:0:15:0: Attached scsi generic sg2 type 13 scsi 1:0:0:0: Attached scsi generic sg3 type 1 PCI: Enabling device: (0000:00:03.1), cmd 141 PCI: Unable to reserve I/O region #6:10@0 for device 0000:00:03.1 pata_sl82c105: probe of 0000:00:03.1 failed with error -16 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: AT Raw Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse as /class/input/input1 ReiserFS: sdb2: found reiserfs format "3.6" with standard journal ReiserFS: sdb2: using ordered data mode ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb2: checking transaction log (sdb2) ReiserFS: sdb2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 176k freed ioctl32(showconsole:355): Unknown cmd fd(0) cmd(40045432){00} arg(ffa32b38) on /dev/console ioctl32(showconsole:390): Unknown cmd fd(0) cmd(40045432){00} arg(fffb4ac8) on /dev/console ReiserFS: sdb2: warning: acl not supported. ReiserFS: sdb2: warning: user_xattr not supported. ReiserFS: sdb2: warning: acl not supported. ReiserFS: sdb2: warning: user_xattr not supported. ioctl32(showconsole:953): Unknown cmd fd(0) cmd(40045432){00} arg(ffc97ac8) on /dev/console ioctl32(showconsole:1125): Unknown cmd fd(0) cmd(40045432){00} arg(fff9bad8) on /dev/console Adding 1048568k swap on /dev/sda2. Priority:-1 extents:1 across:1048568k ioctl32(showconsole:1212): Unknown cmd fd(0) cmd(40045432){00} arg(ffb99b18) on /dev/console e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex ioctl32(showconsole:2409): Unknown cmd fd(0) cmd(40045432){00} arg(fff1fa78) on /dev/tty0 ==> /proc/interrupts <== CPU0 CPU1 CPU2 CPU3 1: 3 3 2 4 i8259 Level i8042 12: 26 28 28 27 i8259 Level i8042 16: 254 597 403 583 XICS Level IPI 87: 2088 2071 2092 2088 XICS Level sym53c8xx 88: 13 13 14 13 XICS Level sym53c8xx 117: 490 506 484 489 XICS Level eth2 BAD: 0 ==> /proc/iomem <== 3fcc0000000-3fcc00fffff : PCI Bus #61 3fcc0000000-3fcc00fffff : PCI Bus #41 3fcc0000000-3fcc00fffff : PCI Bus #21 3fcc0000000-3fcc00fffff : PCI Bus #01 3fcc0000000-3fcc0007fff : 0000:00:02.6 3fcc0000000-3fcc0007fff : 0000:00:02.4 3fcc0000000-3fcc0007fff : 0000:00:02.2 3fd00000000-3fd000fffff : PCI Bus #61 3fd00000000-3fd000fffff : PCI Bus #21 3fd00000000-3fd000fffff : PCI Bus #01 3fd00000000-3fd00007fff : 0001:00:02.6 3fd00000000-3fd00007fff : 0001:00:02.2 3fd80000000-3fdbfffffff : /pci@400000000110 3fd80000000-3fd87ffffff : PCI Bus #01 3fd88000000-3fd8bffffff : PCI Bus #21 3fd88000000-3fd8801ffff : 0000:21:01.0 3fd88000000-3fd8801ffff : e100 3fd88020000-3fd8802ffff : 0000:21:01.0 3fd88030000-3fd88030fff : 0000:21:01.0 3fd88030000-3fd88030fff : e100 3fd8c000000-3fd8fffffff : PCI Bus #41 3fd8c000000-3fd8c001fff : 0000:41:01.1 3fd8c000000-3fd8c001fff : sym53c8xx 3fd8c002000-3fd8c003fff : 0000:41:01.0 3fd8c002000-3fd8c003fff : sym53c8xx 3fd8c004000-3fd8c0043ff : 0000:41:01.1 3fd8c004000-3fd8c0043ff : sym53c8xx 3fd8c005000-3fd8c0053ff : 0000:41:01.0 3fd8c005000-3fd8c0053ff : sym53c8xx 3fd90000000-3fd97ffffff : PCI Bus #61 3fd90000000-3fd90003fff : 0000:61:01.0 3fd9fff0000-3fd9fff7fff : 0000:00:02.0 3fdb4000000-3fdb7ffffff : 0000:00:01.0 3fdb8000000-3fdbbffffff : 0000:00:01.0 3fdbd700000-3fdbd700fff : 0000:00:01.0 3fdbd800000-3fdbd87ffff : 0000:00:01.0 3fde0000000-3fdffffffff : /pci@400000000112 3fde0000000-3fde7ffffff : PCI Bus #01 3fde0000000-3fde0000fff : 0001:01:01.3 3fde0001000-3fde0001fff : 0001:01:01.2 3fde0002000-3fde0002fff : 0001:01:01.1 3fde0003000-3fde0003fff : 0001:01:01.0 3fde8000000-3fdebffffff : PCI Bus #21 3fde8000000-3fde801ffff : 0001:21:01.0 3fde8000000-3fde801ffff : e100 3fde8020000-3fde802ffff : 0001:21:01.0 3fde8030000-3fde8030fff : 0001:21:01.0 3fde8030000-3fde8030fff : e100 3fdec000000-3fdf3ffffff : PCI Bus #61 3fdec000000-3fdef0fffff : PCI Bus #62 3fdec000000-3fdedffffff : 0001:62:00.0 3fdec000000-3fdedffffff : matroxfb FB 3fdee000000-3fdee7fffff : 0001:62:00.0 3fdee800000-3fdee803fff : 0001:62:00.0 3fdee800000-3fdee803fff : matroxfb MMIO 3fdef000000-3fdef01ffff : 0001:62:00.0 3fdffff0000-3fdffff7fff : 0001:00:02.0 ==> /proc/ioports <== 00000000-0000001f : dma1 00000020-00000021 : 8259 (master) 00000040-0000005f : timer 00000060-0000006f : i8042 00000080-0000008f : dma page reg 000000a0-000000a1 : 8259 (slave) 000000c0-000000df : dma2 000002f8-000002ff : serial 000003c0-000003df : matrox 000003f8-000003ff : serial 000004d0-000004d1 : 8259 edge control 00000898-0000089f : serial 0000f000-0000f007 : 0000:00:03.1 0000f010-0000f013 : 0000:00:03.1 0000f020-0000f027 : 0000:00:03.1 0000f030-0000f033 : 0000:00:03.1 0000f040-0000f04f : 0000:00:03.1 00010000-0001ffff : PCI Bus #01 00020000-0002ffff : PCI Bus #21 0002ec00-0002ec3f : 0000:21:01.0 0002ec00-0002ec3f : e100 00030000-0003ffff : PCI Bus #41 0003e800-0003e8ff : 0000:41:01.0 0003e800-0003e8ff : sym53c8xx 0003ec00-0003ecff : 0000:41:01.1 0003ec00-0003ecff : sym53c8xx 00040000-0004ffff : PCI Bus #61 00100000-001fffff : /pci@400000000112 00100000-0010ffff : PCI Bus #01 00110000-0011ffff : PCI Bus #21 0011ec00-0011ec3f : 0001:21:01.0 0011ec00-0011ec3f : e100 00120000-0012ffff : PCI Bus #61 ==> /proc/irq <== 00:01.0 Co-processor: IBM Unknown device 00e0 (rev 01) (prog-if ff) Subsystem: IBM Unknown device 00e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset+ FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.0 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit- 133MHz- SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.2 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.4 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.6 64bit+ 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 00:03.0 ISA bridge: Symphony Labs W83C553 (rev 10) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:02.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit- 133MHz- SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:02.2 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 01) (prog-if 0f) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [a0] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:02.6 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=0 CommitmentLimit=0 Downstream: Capacity=0 CommitmentLimit=0 Capabilities: [b0] Power Management version 2 Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b8] #0c [0000] 0001:01:01.0 USB Controller: Agere Systems USS-344S USB Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Agere Systems USS-344S USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] #06 [0000] Capabilities: [a0] Vital Product Data 0001:62:00.0 VGA compatible controller: Matrox Graphics, Inc. G400/G450 (rev 82) (prog-if 00 [VGA]) Subsystem: IBM Unknown device 0233 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- --ew6BAiZeqk4r7MaW--