From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fredrik Rinnestam Subject: Re: SIL3512 lockup problem using driver verion 0.9 and Linux 2.6.14 Date: Sat, 3 Feb 2007 21:14:49 +0100 Message-ID: <20070203201449.GA1222@useful.obra.se> References: <74342.74582.qm@web52304.mail.yahoo.com> <457E040D.2020707@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mxfep02.bredband.com ([195.54.107.73]:50435 "EHLO mxfep02.bredband.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751581AbXBCUmL (ORCPT ); Sat, 3 Feb 2007 15:42:11 -0500 Received: from ironport2.bredband.com ([195.54.107.84] [195.54.107.84]) by mxfep03.bredband.com with ESMTP id <20070203201533.PARG2708.mxfep03.bredband.com@ironport2.bredband.com> for ; Sat, 3 Feb 2007 21:15:33 +0100 Content-Disposition: inline In-Reply-To: <457E040D.2020707@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org > > ata1: command 0x35 timeout, stat 0xd1 host_stat 0x1 > > ata1: status=0xd1 { Busy } > > sd 0:0:0:0: SCSI error: return code = 0x8000002 > > sda: Current: sense key=0xb > > ASC=0x47 ASCQ=0x0 > > end_request: I/O error, dev sda, sector 17033103 > > ata1: Abnormal status 0xD1 on port 0xC001E087 > > ata1: Alternate status 0xD1 on port 0xC001E08A > > ata1: Error 0xd1 > > ata1: Abnormal status 0xD1 on port 0xC001E087 > > ata1: Alternate status 0xD1 on port 0xC001E08A > > ata1: Error 0xd1 > > ata1: Abnormal status 0xD1 on port 0xC001E087 > > ata1: Alternate status 0xD1 on port 0xC001E08A > > This is message from old error handling and doesn't really contain much > useful info. Even if you have to use previous kernel in production > system, providing error messages from 2.6.19 will help chasing down the > cause. > > -- > tejun I get very similar error-messages with my SiI 3512 controller. I just noticed this while connecting a second drive and moving data from sdb to sda. Copying stuff from the internal ide-controller (nvidia) to sda does not produce any errors. I've also tried diffrent cables without any luck. Kernel is 2.6.19.2 This is what dmesg pukes out: EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata1.00: (BMDMA stat 0x60) ata1.00: tag 0 cmd 0x35 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata1.00: (BMDMA stat 0x60) ata1.00: tag 0 cmd 0x35 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata1.00: (BMDMA stat 0x61) ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: port is slow to respond, please be patient (Status 0xd1) ata1: port failed to respond (30 secs, Status 0xd1) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata1.00: (BMDMA stat 0x61) ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: port is slow to respond, please be patient (Status 0xd1) ata1: port failed to respond (30 secs, Status 0xd1) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata1.00: (BMDMA stat 0x61) ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: port is slow to respond, please be patient (Status 0xd1) ata1: port failed to respond (30 secs, Status 0xd1) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: limiting speed to UDMA/66 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata1.00: (BMDMA stat 0x61) ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: port is slow to respond, please be patient (Status 0xd1) ata1: port failed to respond (30 secs, Status 0xd1) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/66 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata1.00: (BMDMA stat 0x60) ata1.00: tag 0 cmd 0x35 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: limiting speed to UDMA/44 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata1.00: (BMDMA stat 0x61) ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: port is slow to respond, please be patient (Status 0xd1) ata1: port failed to respond (30 secs, Status 0xd1) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/44 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: limiting speed to UDMA/33 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata1.00: (BMDMA stat 0x61) ata1.00: tag 0 cmd 0x35 Emask 0x4 stat 0x40 err 0x0 (timeout) ata1: port is slow to respond, please be patient (Status 0xd1) ata1: port failed to respond (30 secs, Status 0xd1) ata1: soft resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back 01:09.0 Mass storage controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) Subsystem: Silicon Image, Inc. SiI 3512 SATALink Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-