All of lore.kernel.org
 help / color / mirror / Atom feed
From: Emmeran Seehuber <rototor@rototor.de>
To: Tejun Heo <htejun@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.18.2: sporadic SATA port resets (Broadcom BCM5785 (HT1000))
Date: Fri, 9 Feb 2007 12:37:24 +0100	[thread overview]
Message-ID: <200702091237.24576.rototor@rototor.de> (raw)
In-Reply-To: <45CC3C9C.3050101@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 1003 bytes --]

Am Friday 09 February 2007 schrieb Tejun Heo:
> Hi,

>
> This is just the recovery part.  Need more log.  If possible, please
> give a shot at 2.6.20.  It might have fixed your problem or at least
> allow better diagnosis.
>

I´ll look into getting 2.6.20 on the machine. But it might take some time till 
we can do this.

> > Does somebody have a glue whats going on here? Could it be a hardware
> > failure?
>
> It might be.  Quite some SATA bug reports turn out to be hardware
> problem, most commonly PSU issues.

The power supply unit (you meant this with PSU, didn`t you?) has 800 Watt, so 
it should be powerfull enough for one harddisk and no graphics board.

> > Do you need additional information?
>
> Yeah, please post the content of /var/log/boot.msg if available and the
> result of dmesg and lspci -nn.

We don`t have a /var/log/boot.msg, but it seems the boot messages were saved 
in /var/log/dmesg, so I attached it.

Thanks for your effort.

cu,
  Emmy

[-- Attachment #2: lspci-nn.txt --]
[-- Type: text/plain, Size: 1945 bytes --]

00:01.0 PCI bridge [0604]: Broadcom HT1000 PCI/PCI-X bridge [1166:0036]
00:02.0 Host bridge [0600]: Broadcom HT1000 Legacy South Bridge [1166:0205]
00:02.1 IDE interface [0101]: Broadcom HT1000 Legacy IDE controller [1166:0214]
00:02.2 ISA bridge [0601]: Broadcom HT1000 LPC Bridge [1166:0234]
00:03.0 USB Controller [0c03]: Broadcom HT1000 USB Controller [1166:0223] (rev 01)
00:03.1 USB Controller [0c03]: Broadcom HT1000 USB Controller [1166:0223] (rev 01)
00:03.2 USB Controller [0c03]: Broadcom HT1000 USB Controller [1166:0223] (rev 01)
00:04.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05)
00:05.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05)
00:06.0 VGA compatible controller [0300]: XGI - Xabre Graphics Inc Volari Z7 [18ca:0020]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:0d.0 PCI bridge [0604]: Broadcom HT1000 PCI/PCI-X bridge [1166:0104] (rev c0)
01:0e.0 RAID bus controller [0104]: Broadcom BCM5785 (HT1000) SATA Native SATA Mode [1166:024a]

[-- Attachment #3: dmesg.txt.gz --]
[-- Type: application/x-gzip, Size: 1191 bytes --]

[-- Attachment #4: boot.dmesg.txt.gz --]
[-- Type: application/x-gzip, Size: 7357 bytes --]

  reply	other threads:[~2007-02-09 11:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-07 17:17 2.6.18.2: sporadic SATA port resets (Broadcom BCM5785 (HT1000)) Emmeran Seehuber
2007-02-09  9:19 ` Tejun Heo
2007-02-09 11:37   ` Emmeran Seehuber [this message]
2007-02-09 13:54     ` Tejun Heo
2007-02-09 17:09       ` Emmeran Seehuber
2007-02-10  6:49         ` Tejun Heo
2007-02-10  8:42           ` Emmeran Seehuber
2007-02-11 22:19             ` Tejun Heo
2007-02-09 17:56 koan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200702091237.24576.rototor@rototor.de \
    --to=rototor@rototor.de \
    --cc=htejun@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.