From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752577AbXBKCke (ORCPT ); Sat, 10 Feb 2007 21:40:34 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752619AbXBKCke (ORCPT ); Sat, 10 Feb 2007 21:40:34 -0500 Received: from userg501.nifty.com ([202.248.238.81]:27509 "EHLO userg501.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752577AbXBKCkd (ORCPT ); Sat, 10 Feb 2007 21:40:33 -0500 DomainKey-Signature: a=rsa-sha1; s=userg501; d=nifty.com; c=nofws; q=dns; b=Bxe4yxLJ6pWApRoPKiQkEZ0XVSUPNMIh1V67s5SAo4Vt2t5L+jPX1MO9why3AYPED d2ga0o79FKOaHpC2/txHQ== Date: Sun, 11 Feb 2007 11:40:13 +0900 From: Komuro To: linux-kernel@vger.kernel.org Cc: alan@lxorguk.ukuu.org.uk Subject: Re: [BUG] PATA_PCMCIA does not work Message-Id: <20070211114013.65b2be2c.komurojun-mbn@nifty.com> In-Reply-To: <20070211101537.e40fa309.komurojun-mbn@nifty.com> References: <20061217212752.d93816b4.komurojun-mbn@nifty.com> <20061217040222.GD17561@ftp.linux.org.uk> <20070211101537.e40fa309.komurojun-mbn@nifty.com> X-Mailer: Sylpheed version 2.2.10 (GTK+ 2.10.4; i386-redhat-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org >> [pata_pcmcia dmesg] >> ata1.00: CFA, max PIO0, 20480 sectors: LBA >> ata1.00: ata1: dev 0 multi count 0 >> ata1.01: CFA, max PIO0, 20480 sectors: LBA >> ata1.01: ata1: dev 1 multi count 0 >Do you have two cards here ? No. one card. I am not sure why two devices are detected. Actually, this card works properly with ide-cs driver. but it displays some warning message. hde: SunDisk SDP5-10, CFA DISK drive hdf: SunDisk SDP5-10, CFA DISK drive ide-probe: ignoring undecoded slave ide2 at 0xd100-0xd107,0xd10e on irq 3 hde: max request size: 128KiB hde: 20480 sectors (10 MB) w/1KiB Cache, CHS=320/2/32 hde:hde: set_geometry_intr: status=0x51 { DriveReady SeekComplete Error } hde: set_geometry_intr: error=0x04 { DriveStatusError } ide: failed opcode was: unknown hde1 ide-cs: hde: Vpp = 0.0 Best Regards Komuro