From: akpm@linux-foundation.org
To: clameter@sgi.com, James.Bottomley@steeleye.com, ak@suse.de,
kyle@mcmartin.ca, lethal@linux-sh.org, tony.luck@intel.com,
willy@debian.org, mm-commits@vger.kernel.org
Subject: - introduce-config_zone_dma.patch removed from -mm tree
Date: Sun, 11 Feb 2007 14:46:34 -0800 [thread overview]
Message-ID: <200702112246.l1BMkYvc015500@shell0.pdx.osdl.net> (raw)
The patch titled
optional ZONE_DMA: introduce CONFIG_ZONE_DMA
has been removed from the -mm tree. Its filename was
introduce-config_zone_dma.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: optional ZONE_DMA: introduce CONFIG_ZONE_DMA
From: Christoph Lameter <clameter@sgi.com>
This patch simply defines CONFIG_ZONE_DMA for all arches. We later do special
things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work
without ZONE_DMA.
CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture
handles ISA DMA.
First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch
needs ZONE_DMA because ISA DMA devices are supported. We can catch this in
mm/Kconfig and do not need to modify arch code.
Second, arches may use ZONE_DMA in an unknown way. We set CONFIG_ZONE_DMA for
all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards
compatibility. The arches may later undefine ZONE_DMA if their arch code has
been verified to not depend on ZONE_DMA.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/cris/Kconfig | 4 ++++
arch/frv/Kconfig | 4 ++++
arch/h8300/Kconfig | 4 ++++
arch/ia64/Kconfig | 4 ++++
arch/m68knommu/Kconfig | 4 ++++
arch/s390/Kconfig | 4 ++++
arch/v850/Kconfig | 3 +++
arch/xtensa/Kconfig | 4 ++++
mm/Kconfig | 4 ++++
9 files changed, 35 insertions(+)
diff -puN arch/cris/Kconfig~introduce-config_zone_dma arch/cris/Kconfig
--- a/arch/cris/Kconfig~introduce-config_zone_dma
+++ a/arch/cris/Kconfig
@@ -9,6 +9,10 @@ config MMU
bool
default y
+config ZONE_DMA
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
diff -puN arch/frv/Kconfig~introduce-config_zone_dma arch/frv/Kconfig
--- a/arch/frv/Kconfig~introduce-config_zone_dma
+++ a/arch/frv/Kconfig
@@ -6,6 +6,10 @@ config FRV
bool
default y
+config ZONE_DMA
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
diff -puN arch/h8300/Kconfig~introduce-config_zone_dma arch/h8300/Kconfig
--- a/arch/h8300/Kconfig~introduce-config_zone_dma
+++ a/arch/h8300/Kconfig
@@ -17,6 +17,10 @@ config SWAP
bool
default n
+config ZONE_DMA
+ bool
+ default y
+
config FPU
bool
default n
diff -puN arch/ia64/Kconfig~introduce-config_zone_dma arch/ia64/Kconfig
--- a/arch/ia64/Kconfig~introduce-config_zone_dma
+++ a/arch/ia64/Kconfig
@@ -24,6 +24,10 @@ config 64BIT
bool
default y
+config ZONE_DMA
+ bool
+ default y
+
config MMU
bool
default y
diff -puN arch/m68knommu/Kconfig~introduce-config_zone_dma arch/m68knommu/Kconfig
--- a/arch/m68knommu/Kconfig~introduce-config_zone_dma
+++ a/arch/m68knommu/Kconfig
@@ -17,6 +17,10 @@ config FPU
bool
default n
+config ZONE_DMA
+ bool
+ default y
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
diff -puN arch/s390/Kconfig~introduce-config_zone_dma arch/s390/Kconfig
--- a/arch/s390/Kconfig~introduce-config_zone_dma
+++ a/arch/s390/Kconfig
@@ -7,6 +7,10 @@ config MMU
bool
default y
+config ZONE_DMA
+ bool
+ default y
+
config LOCKDEP_SUPPORT
bool
default y
diff -puN arch/v850/Kconfig~introduce-config_zone_dma arch/v850/Kconfig
--- a/arch/v850/Kconfig~introduce-config_zone_dma
+++ a/arch/v850/Kconfig
@@ -10,6 +10,9 @@ mainmenu "uClinux/v850 (w/o MMU) Kernel
config MMU
bool
default n
+config ZONE_DMA
+ bool
+ default y
config RWSEM_GENERIC_SPINLOCK
bool
default y
diff -puN arch/xtensa/Kconfig~introduce-config_zone_dma arch/xtensa/Kconfig
--- a/arch/xtensa/Kconfig~introduce-config_zone_dma
+++ a/arch/xtensa/Kconfig
@@ -7,6 +7,10 @@ config FRAME_POINTER
bool
default n
+config ZONE_DMA
+ bool
+ default y
+
config XTENSA
bool
default y
diff -puN mm/Kconfig~introduce-config_zone_dma mm/Kconfig
--- a/mm/Kconfig~introduce-config_zone_dma
+++ a/mm/Kconfig
@@ -139,6 +139,10 @@ config SPLIT_PTLOCK_CPUS
default "4096" if PARISC && !PA20
default "4"
+config ZONE_DMA
+ def_bool y
+ depends on GENERIC_ISA_DMA
+
#
# support for page migration
#
_
Patches currently in -mm which might be from clameter@sgi.com are
origin.patch
smaps-extract-pmd-walker-from-smaps-code.patch
smaps-add-pages-referenced-count-to-smaps.patch
smaps-add-clear_refs-file-to-clear-reference.patch
smaps-add-clear_refs-file-to-clear-reference-fix.patch
replace-highest_possible_node_id-with-nr_node_ids.patch
convert-highest_possible_processor_id-to-nr_cpu_ids.patch
convert-highest_possible_processor_id-to-nr_cpu_ids-fix.patch
slab-reduce-size-of-alien-cache-to-cover-only-possible-nodes.patch
slab-shutdown-cache_reaper-when-cpu-goes-down.patch
mm-only-sched-add-a-few-scheduler-event-counters.patch
mm-implement-swap-prefetching-vs-zvc-stuff.patch
mm-implement-swap-prefetching-vs-zvc-stuff-2.patch
zvc-support-nr_slab_reclaimable--nr_slab_unreclaimable-swap_prefetch.patch
reduce-max_nr_zones-swap_prefetch-remove-incorrect-use-of-zone_highmem.patch
numa-add-zone_to_nid-function-swap_prefetch.patch
remove-uses-of-kmem_cache_t-from-mm-and-include-linux-slabh-prefetch.patch
readahead-state-based-method-aging-accounting.patch
readahead-state-based-method-aging-accounting-vs-zvc-changes.patch
reply other threads:[~2007-02-11 22:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702112246.l1BMkYvc015500@shell0.pdx.osdl.net \
--to=akpm@linux-foundation.org \
--cc=James.Bottomley@steeleye.com \
--cc=ak@suse.de \
--cc=clameter@sgi.com \
--cc=kyle@mcmartin.ca \
--cc=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=tony.luck@intel.com \
--cc=willy@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.