All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Alan <alan@lxorguk.ukuu.org.uk>
Cc: Pavel Machek <pavel@ucw.cz>,
	Arjan van de Ven <arjan@infradead.org>,
	nigel@nigel.suspend2.net, LKML <linux-kernel@vger.kernel.org>
Subject: Re: NAK new drivers without proper power management?
Date: Mon, 12 Feb 2007 00:04:14 +0100	[thread overview]
Message-ID: <200702120004.15529.rjw@sisk.pl> (raw)
In-Reply-To: <20070211210258.0b8da53c@localhost.localdomain>

On Sunday, 11 February 2007 22:02, Alan wrote:
> > > "If the device requires that, implement .suspend and .resume or at least
> > > define .suspend that will always return -ENOSYS (then people will know they
> > > have to unload the driver before the suspend).  Similarly, if you aren't sure
> > > whether or not the device requires .suspend and .resume, define .suspend that
> > > will always return -ENOSYS."
> > 
> > Sounds ok to me. Where should this text go?
> > Documentation/SubmittingDrivers ?
> 
> And testing/submitting drivers, perhaps with additional text in that to
> make it clear we want suspend/resume support or good excuses
> 
> "Please verify your driver correctly handles suspend and resume. If it
> does not your patch submission is likely to be suspended and only resume
> when the driver correctly handles this feature"

I have prepared a patch against Documentation/SubmittingDrivers.  Please
have a look.

---
 Documentation/SubmittingDrivers |   12 ++++++++++++
 1 file changed, 12 insertions(+)

Index: linux-2.6.20-git4/Documentation/SubmittingDrivers
===================================================================
--- linux-2.6.20-git4.orig/Documentation/SubmittingDrivers
+++ linux-2.6.20-git4/Documentation/SubmittingDrivers
@@ -87,6 +87,18 @@ Clarity:	It helps if anyone can see how 
 		driver that intentionally obfuscates how the hardware works
 		it will go in the bitbucket.
 
+PM support:	Since Linux is used on many portable and desktop systems, your
+		driver is likely to be used on such a system and therefore it
+		should support basic power management by implementing, if
+		necessary, the .suspend and .resume methods used during the
+		system-wide suspend and resume transitions.  You should verify
+		that your driver correctly handles the suspend and resume, but
+		if you are unable to ensure that, please at least define the
+		.suspend method returning the -ENOSYS ("Function not
+		implemented") error.  Note, however, that in such a case your
+		submission is likely to be suspended and only resumed when the
+		driver correctly handles this feature.
+
 Control:	In general if there is active maintainance of a driver by
 		the author then patches will be redirected to them unless
 		they are totally obvious and without need of checking.

  reply	other threads:[~2007-02-11 23:07 UTC|newest]

Thread overview: 116+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-09 21:57 NAK new drivers without proper power management? Nigel Cunningham
2007-02-09 22:17 ` Arjan van de Ven
2007-02-09 22:26   ` Nigel Cunningham
2007-02-09 22:44     ` Rafael J. Wysocki
2007-02-09 22:44       ` Rafael J. Wysocki
2007-02-09 22:51       ` Nigel Cunningham
2007-02-09 22:51         ` Nigel Cunningham
2007-02-09 23:12         ` Rafael J. Wysocki
2007-02-09 23:12           ` Rafael J. Wysocki
2007-02-09 23:28           ` Nigel Cunningham
2007-02-09 23:28             ` Nigel Cunningham
2007-02-10  0:12             ` Rafael J. Wysocki
2007-02-10  0:12               ` Rafael J. Wysocki
2007-02-10  0:25     ` Jeff Garzik
2007-02-10  6:43       ` Willy Tarreau
2007-02-10 23:52         ` Tilman Schmidt
2007-02-10  7:15     ` Arjan van de Ven
2007-02-10 19:38   ` Pavel Machek
2007-02-10 22:20     ` Rafael J. Wysocki
2007-02-10 22:37       ` Nigel Cunningham
2007-02-10 23:45         ` Tilman Schmidt
2007-02-11  0:27           ` Rafael J. Wysocki
2007-02-11 22:41             ` Nigel Cunningham
2007-02-13 15:55               ` Mark Lord
2007-02-13 16:06                 ` Christoph Hellwig
2007-02-11 22:37           ` Nigel Cunningham
2007-02-12  0:10             ` Tilman Schmidt
2007-02-12  0:20               ` Rafael J. Wysocki
2007-02-12  4:08               ` Nigel Cunningham
2007-02-12 20:06                 ` Rafael J. Wysocki
2007-02-12 22:38                   ` Nigel Cunningham
2007-03-03 22:48               ` Suspend/resume semantics for ISDN drivers (was: NAK new drivers without proper power management?) Tilman Schmidt
2007-03-04 19:04                 ` Rafael J. Wysocki
2007-03-08 23:35                   ` Pavel Machek
2007-02-11  6:46         ` NAK new drivers without proper power management? Willy Tarreau
2007-02-11 13:04           ` Rafael J. Wysocki
2007-02-11 22:47           ` Nigel Cunningham
2007-02-11 22:57             ` Manu Abraham
2007-02-11 23:20               ` Nigel Cunningham
2007-02-11 23:25                 ` Manu Abraham
2007-02-11 23:29                   ` Pavel Machek
2007-02-11 23:33                   ` Nigel Cunningham
2007-02-12 16:52                     ` Pavel Machek
2007-02-12 20:31                       ` Rafael J. Wysocki
2007-02-12 20:58                         ` Pavel Machek
2007-02-12 21:01                           ` Rafael J. Wysocki
2007-02-12 21:24                             ` Nigel Cunningham
2007-02-12 21:43                               ` Rafael J. Wysocki
2007-02-13  9:42                         ` Tilman Schmidt
2007-02-13 19:24                           ` Rafael J. Wysocki
2007-02-14 23:45                             ` Stefan Richter
2007-02-12  9:45                   ` Arjan van de Ven
2007-02-12 12:59           ` Gerhard Mack
2007-02-12 20:20             ` Willy Tarreau
2007-02-13 15:23               ` Brad Campbell
2007-02-12 20:46             ` Rafael J. Wysocki
2007-02-12 13:51           ` Tino Keitel
2007-02-11 19:42       ` Pavel Machek
2007-02-11 21:02         ` Alan
2007-02-11 23:04           ` Rafael J. Wysocki [this message]
2007-02-12  0:28             ` Alan
2007-02-12  0:24               ` Rafael J. Wysocki
2007-02-11 23:10           ` Nigel Cunningham
2007-02-11 23:16             ` Rafael J. Wysocki
2007-02-11 23:22               ` Nigel Cunningham
2007-02-11 23:23                 ` Pavel Machek
2007-02-11 23:21             ` Pavel Machek
2007-02-11 23:29               ` Nigel Cunningham
2007-02-11 22:21         ` Tilman Schmidt
2007-02-12  8:49       ` Geert Uytterhoeven
2007-02-12 15:04         ` Pavel Machek
2007-02-12 15:57           ` Geert Uytterhoeven
2007-02-12 16:55             ` Pavel Machek
2007-02-12 20:38             ` Nigel Cunningham
2007-02-13 10:02             ` Tilman Schmidt
2007-02-10  3:42 ` Matthew Garrett
2007-02-10  4:42   ` Nigel Cunningham
     [not found] <fa.xSKPgY66Q+DPCZ1pszFFfdrJ0To@ifi.uio.no>
     [not found] ` <fa.FzHdYYYH5Ru57c8/yRxLylpH0Kk@ifi.uio.no>
     [not found]   ` <fa.DuG12yQo+RR4jIjJTnoOwtKM0Ao@ifi.uio.no>
     [not found]     ` <fa.Jy0FJQtASvVEpsy8Q96uoHtyEVA@ifi.uio.no>
2007-02-10  1:50       ` Robert Hancock
2007-02-10  1:59         ` Lee Revell
2007-02-10  2:09           ` Nigel Cunningham
2007-02-10  2:22             ` Lee Revell
2007-02-10  3:21               ` Kevin Fox
2007-02-10 20:40               ` Adrian Bunk
2007-02-10  4:35           ` Joseph Fannin
2007-02-13 21:08             ` Pavel Machek
2007-02-10 12:47           ` Stefan Richter
2007-02-10  2:05         ` Nigel Cunningham
2007-02-10  3:27           ` Dmitry Torokhov
2007-02-10  4:18             ` Nigel Cunningham
     [not found]   ` <fa.DhkemAgVI60diqZy0t9GzpwyLmk@ifi.uio.no>
     [not found]     ` <fa.E/NjHlgg0HqDg5CgZjnCHFi2AMM@ifi.uio.no>
     [not found]       ` <fa.kop49l/7yexJoUGrzk6vVeIP934@ifi.uio.no>
2007-02-10 23:20         ` Robert Hancock
2007-02-11  0:44           ` Rafael J. Wysocki
2007-02-11 17:01             ` Pavel Machek
2007-02-11 22:40             ` Nigel Cunningham
2007-02-11 23:29               ` Rafael J. Wysocki
2007-02-11 23:40                 ` Nigel Cunningham
     [not found]         ` <fa.EgQN5JpU6xrZSLyOY0kWjJ26hUM@ifi.uio.no>
2007-02-11 18:31           ` Robert Hancock
2007-02-11 21:52             ` Willy Tarreau
2007-02-11 22:26               ` Nigel Cunningham
2007-02-11 22:46                 ` Willy Tarreau
2007-02-11 23:18                   ` Nigel Cunningham
2007-02-11 23:38                     ` Willy Tarreau
2007-02-11 23:45                       ` Nigel Cunningham
2007-02-12  0:26                       ` Alan
2007-02-12  5:19                         ` Willy Tarreau
2007-02-12 20:20                           ` Rafael J. Wysocki
2007-02-12 22:36                           ` Nigel Cunningham
2007-02-11 23:23                   ` Alan
2007-02-11 23:38                   ` Rafael J. Wysocki
2007-02-11 23:41                 ` Rafael J. Wysocki
2007-02-11 23:47                   ` Nigel Cunningham
2007-02-11 23:50                     ` Rafael J. Wysocki
2007-02-11 23:55                       ` Nigel Cunningham
2007-02-12  0:09                         ` Rafael J. Wysocki
2007-02-12  0:15                           ` Nigel Cunningham
2007-02-12 12:19               ` Pavel Machek
     [not found]         ` <fa.O1YH4k5KtBGCNs5i2yB17bPvPGw@ifi.uio.no>
     [not found]           ` <fa.RfzClbTP/7B79AoEbQLNj3ABfIk@ifi.uio.no>
     [not found]             ` <fa.AaJ/ugmiUmPO8uC+y1rS9JLuuMc@ifi.uio.no>
2007-02-12  0:59               ` Robert Hancock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200702120004.15529.rjw@sisk.pl \
    --to=rjw@sisk.pl \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=arjan@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nigel@nigel.suspend2.net \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.