From: Christian Krafft <krafft@de.ibm.com>
To: Christian Krafft <krafft@de.ibm.com>
Cc: linuxppc-dev@ozlabs.org, Nathan Lynch <ntl@pobox.com>,
cbe-oss-dev@ozlabs.org
Subject: Re: [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade
Date: Tue, 13 Feb 2007 20:28:54 +0100 [thread overview]
Message-ID: <20070213202854.09332582@localhost> (raw)
In-Reply-To: <20070213194806.3c266282@localhost>
Subject: powerpc: add PMI driver for cell blade
From: Christian Krafft <krafft@de.ibm.com>
This patch adds driver code for the PMI device found in future IBM products.
PMI stands for "Platform Management Interrupt" and is a way to communicate
with the BMC. It provides bidirectional communication with a low latency.
Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
---
Index: linux/arch/powerpc/Kconfig
===================================================================
--- linux.orig/arch/powerpc/Kconfig
+++ linux/arch/powerpc/Kconfig
@@ -577,6 +577,14 @@ config RTAS_FLASH
tristate "Firmware flash interface"
depends on PPC64 && RTAS_PROC
+config PPC_PMI
+ tristate "Support for PMI"
+ depends PPC_IBM_CELL_BLADE
+ help
+ PMI is a way to communicate with the board mangement controller.
+ It is used in some IBM Cell blades.
+ default m
+
config MMIO_NVRAM
bool
default n
Index: linux/arch/powerpc/sysdev/Makefile
===================================================================
--- linux.orig/arch/powerpc/sysdev/Makefile
+++ linux/arch/powerpc/sysdev/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indire
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
+obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
Index: linux/arch/powerpc/sysdev/pmi.c
===================================================================
--- /dev/null
+++ linux/arch/powerpc/sysdev/pmi.c
@@ -0,0 +1,307 @@
+/*
+ * pmi driver
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * PMI is a way to communicate with the BMC via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include <asm/io.h>
+#include <asm/pmi.h>
+
+
+struct pmi_data {
+ struct list_head handler;
+ spinlock_t handler_spinlock;
+ spinlock_t pmi_spinlock;
+ struct mutex msg_mutex;
+ pmi_message_t msg;
+ struct completion *completion;
+ struct of_device *dev;
+ int irq;
+ u8 __iomem *pmi_reg;
+ struct work_struct work;
+};
+
+
+
+static void __iomem *of_iomap(struct device_node *np)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, 0, &res))
+ return NULL;
+
+ pr_debug("Resource start: 0x%lx\n", res.start);
+ pr_debug("Resource end: 0x%lx\n", res.end);
+
+ return ioremap(res.start, 1 + res.end - res.start);
+}
+
+
+static int pmi_irq_handler(int irq, void *dev_id)
+{
+ struct pmi_data *data;
+ u8 type;
+ int rc;
+
+ data = dev_id;
+
+ spin_lock(&data->pmi_spinlock);
+
+ type = ioread8(data->pmi_reg + PMI_READ_TYPE);
+ pr_debug("pmi: got message of type %d\n", type);
+
+ if (type & PMI_ACK && !data->completion) {
+ printk(KERN_WARNING "pmi: got unexpected ACK message.\n");
+ rc = -EIO;
+ goto unlock;
+ }
+
+ if (data->completion && !(type & PMI_ACK)) {
+ printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type);
+ rc = -EIO;
+ goto unlock;
+ }
+
+ data->msg.type = type;
+ data->msg.data0 = ioread8(data->pmi_reg + PMI_READ_DATA0);
+ data->msg.data1 = ioread8(data->pmi_reg + PMI_READ_DATA1);
+ data->msg.data2 = ioread8(data->pmi_reg + PMI_READ_DATA2);
+ rc = 0;
+unlock:
+ spin_unlock(&data->pmi_spinlock);
+
+ if (rc == -EIO) {
+ rc = IRQ_HANDLED;
+ goto out;
+ }
+
+ if (data->msg.type & PMI_ACK) {
+ complete(data->completion);
+ rc = IRQ_HANDLED;
+ goto out;
+ }
+
+ schedule_work(&data->work);
+
+ rc = IRQ_HANDLED;
+out:
+ return rc;
+}
+
+
+static struct of_device_id pmi_match[] = {
+ { .type = "ibm,pmi", .name = "ibm,pmi" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, pmi_match);
+
+static void pmi_notify_handlers(struct work_struct *work)
+{
+ struct pmi_data *data;
+ struct pmi_handler *handler;
+
+ data = container_of(work, struct pmi_data, work);
+
+ spin_lock(&data->handler_spinlock);
+ list_for_each_entry(handler, &data->handler, node) {
+ pr_debug(KERN_INFO "pmi: notifying handler %p\n", handler);
+ if (handler->type == data->msg.type)
+ handler->handle_pmi_message(data->dev, data->msg);
+ }
+ spin_unlock(&data->handler_spinlock);
+}
+
+static int pmi_of_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = dev->node;
+ struct pmi_data *data;
+ int rc;
+
+ data = kzalloc(sizeof(struct pmi_data), GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR "pmi: could not allocate memory.\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ data->pmi_reg = of_iomap(np);
+ if (!data->pmi_reg) {
+ printk(KERN_ERR "pmi: invalid register address.\n");
+ rc = -EFAULT;
+ goto error_cleanup_data;
+ }
+
+ INIT_LIST_HEAD(&data->handler);
+
+ mutex_init(&data->msg_mutex);
+ spin_lock_init(&data->pmi_spinlock);
+ spin_lock_init(&data->handler_spinlock);
+
+ INIT_WORK(&data->work, pmi_notify_handlers);
+
+ dev->dev.driver_data = data;
+ data->dev = dev;
+
+ data->irq = irq_of_parse_and_map(np, 0);
+ if (data->irq == NO_IRQ) {
+ printk(KERN_ERR "pmi: invalid interrupt.\n");
+ rc = -EFAULT;
+ goto error_cleanup_iomap;
+ }
+
+ rc = request_irq(data->irq, pmi_irq_handler, 0, "pmi", data);
+ if (rc) {
+ printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n",
+ data->irq, rc);
+ goto error_cleanup_iomap;
+ }
+
+ printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg);
+
+ goto out;
+
+error_cleanup_iomap:
+ iounmap(data->pmi_reg);
+
+error_cleanup_data:
+ kfree(data);
+
+out:
+ return rc;
+}
+
+static int pmi_of_remove(struct of_device *dev)
+{
+ struct pmi_data *data;
+ struct pmi_handler *handler, *tmp;
+
+ data = dev->dev.driver_data;
+
+ free_irq(data->irq, data);
+ iounmap(data->pmi_reg);
+
+ spin_lock(&data->handler_spinlock);
+
+ list_for_each_entry_safe(handler, tmp, &data->handler, node)
+ list_del(&handler->node);
+
+ spin_unlock(&data->handler_spinlock);
+
+ kfree(dev->dev.driver_data);
+
+ return 0;
+}
+
+static struct of_platform_driver pmi_of_platform_driver = {
+ .name = "pmi",
+ .match_table = pmi_match,
+ .probe = pmi_of_probe,
+ .remove = pmi_of_remove
+};
+
+static int __init pmi_module_init(void)
+{
+ return of_register_platform_driver(&pmi_of_platform_driver);
+}
+module_init(pmi_module_init);
+
+static void __exit pmi_module_exit(void)
+{
+ of_unregister_platform_driver(&pmi_of_platform_driver);
+}
+module_exit(pmi_module_exit);
+
+void pmi_send_message(struct of_device *device, pmi_message_t msg)
+{
+ struct pmi_data *data;
+ unsigned long flags;
+ DECLARE_COMPLETION_ONSTACK(completion);
+
+ data = device->dev.driver_data;
+
+ mutex_lock(&data->msg_mutex);
+
+ data->msg = msg;
+ pr_debug("pmi_send_message: msg is %08x\n", *(u32*)&msg);
+
+ data->completion = &completion;
+
+ spin_lock_irqsave(&data->pmi_spinlock, flags);
+ iowrite8(msg.data0, data->pmi_reg + PMI_WRITE_DATA0);
+ iowrite8(msg.data1, data->pmi_reg + PMI_WRITE_DATA1);
+ iowrite8(msg.data2, data->pmi_reg + PMI_WRITE_DATA2);
+ iowrite8(msg.type, data->pmi_reg + PMI_WRITE_TYPE);
+ spin_unlock_irqrestore(&data->pmi_spinlock, flags);
+
+ pr_debug("pmi_send_message: wait for completion\n");
+
+ wait_for_completion_interruptible_timeout(data->completion,
+ PMI_TIMEOUT);
+
+ data->completion = NULL;
+
+ mutex_unlock(&data->msg_mutex);
+}
+EXPORT_SYMBOL_GPL(pmi_send_message);
+
+void pmi_register_handler(struct of_device *device,
+ struct pmi_handler *handler)
+{
+ struct pmi_data *data;
+
+ pr_debug("pmi: registering handler %p\n", handler);
+
+ data = device->dev.driver_data;
+
+ spin_lock(&data->handler_spinlock);
+ list_add_tail(&handler->node, &data->handler);
+ spin_unlock(&data->handler_spinlock);
+}
+EXPORT_SYMBOL_GPL(pmi_register_handler);
+
+void pmi_unregister_handler(struct of_device *device,
+ struct pmi_handler *handler)
+{
+ struct pmi_data *data;
+
+ pr_debug("pmi: unregistering handler %p\n", handler);
+
+ data = device->dev.driver_data;
+
+ spin_lock(&data->handler_spinlock);
+ list_del(&handler->node);
+ spin_unlock(&data->handler_spinlock);
+}
+EXPORT_SYMBOL_GPL(pmi_unregister_handler);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+MODULE_DESCRIPTION("IBM Platform Management Interrupt driver");
Index: linux/include/asm-powerpc/pmi.h
===================================================================
--- /dev/null
+++ linux/include/asm-powerpc/pmi.h
@@ -0,0 +1,63 @@
+#ifndef _POWERPC_PMI_H
+#define _POWERPC_PMI_H
+
+/*
+ * Definitions for talking with PMI device on PowerPC
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/of_device.h>
+
+#define PMI_TYPE_FREQ_CHANGE 0x01
+#define PMI_READ_TYPE 0
+#define PMI_READ_DATA0 1
+#define PMI_READ_DATA1 2
+#define PMI_READ_DATA2 3
+#define PMI_WRITE_TYPE 4
+#define PMI_WRITE_DATA0 5
+#define PMI_WRITE_DATA1 6
+#define PMI_WRITE_DATA2 7
+
+#define PMI_ACK 0x80
+
+#define PMI_TIMEOUT 100
+
+typedef struct {
+ u8 type;
+ u8 data0;
+ u8 data1;
+ u8 data2;
+} pmi_message_t;
+
+struct pmi_handler {
+ struct list_head node;
+ u8 type;
+ void (*handle_pmi_message) (struct of_device *, pmi_message_t);
+};
+
+void pmi_register_handler(struct of_device *, struct pmi_handler *);
+void pmi_unregister_handler(struct of_device *, struct pmi_handler *);
+
+void pmi_send_message(struct of_device *, pmi_message_t);
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMI_H */
Index: linux/arch/powerpc/configs/cell_defconfig
===================================================================
--- linux.orig/arch/powerpc/configs/cell_defconfig
+++ linux/arch/powerpc/configs/cell_defconfig
@@ -147,6 +147,7 @@ CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
+CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
next prev parent reply other threads:[~2007-02-13 19:28 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-09 17:35 [patch 0/1] pmi: initial version Christian Krafft
2007-02-09 17:45 ` [patch 1/1] " Christian Krafft
2007-02-09 22:29 ` Nathan Lynch
2007-02-12 9:12 ` Christian Krafft
2007-02-13 13:34 ` [Cbe-oss-dev] [patch v2] " Christian Krafft
2007-02-13 18:44 ` [Cbe-oss-dev] [patch v3] " Christian Krafft
2007-02-13 18:48 ` [Cbe-oss-dev] [patch v3] powerpc: add PMI driver for cell blade Christian Krafft
2007-02-13 19:20 ` Christian Krafft
2007-02-13 19:28 ` Christian Krafft [this message]
2007-02-14 0:30 ` Paul Mackerras
2007-02-14 8:39 ` Christian Krafft
2007-02-14 10:22 ` Paul Mackerras
2007-02-14 13:07 ` Christian Krafft
2007-02-14 13:09 ` Christian Krafft
2007-02-15 7:06 ` Heiko J Schick
2007-02-15 10:50 ` Benjamin Herrenschmidt
2007-02-15 19:19 ` Segher Boessenkool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070213202854.09332582@localhost \
--to=krafft@de.ibm.com \
--cc=cbe-oss-dev@ozlabs.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=ntl@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.