From: Folkert van Heusden <folkert@vanheusden.com>
To: linux-kernel@vger.kernel.org
Subject: [2.6.20] possible circular locking dependency detected
Date: Wed, 14 Feb 2007 22:59:23 +0100 [thread overview]
Message-ID: <20070214215922.GW26684@vanheusden.com> (raw)
Is this of any interest?
[ 141.713801] =======================================================
[ 141.713891] [ INFO: possible circular locking dependency detected ]
[ 141.713937] 2.6.20 #2
[ 141.713980] -------------------------------------------------------
[ 141.714025] tor/5534 is trying to acquire lock:
[ 141.714070] (tty_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 141.714272]
[ 141.714273] but task is already holding lock:
[ 141.714277] (&s->s_dquot.dqptr_sem){----}, at: [<c1099403>] dquot_alloc_space+0x50/0x189
[ 141.714484]
[ 141.714486] which lock already depends on the new lock.
[ 141.714488]
[ 141.714490]
[ 141.714491] the existing dependency chain (in reverse order) is:
[ 141.714690]
[ 141.714691] -> #4 (&s->s_dquot.dqptr_sem){----}:
[ 141.714696] [<c10354b8>] check_prev_add+0x154/0x206
[ 141.714706] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 141.714716] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 141.714723] [<c1037624>] lock_acquire+0x62/0x81
[ 141.714730] [<c1032b5f>] down_read+0x2b/0x3d
[ 141.714739] [<c1099403>] dquot_alloc_space+0x50/0x189
[ 141.714746] [<c10a98e6>] ext3_new_blocks+0x44b/0x5a2
[ 141.714754] [<c10abe78>] ext3_alloc_blocks+0x40/0xdf
[ 141.714762] [<c10abf67>] ext3_alloc_branch+0x50/0x21b
[ 141.714770] [<c10ac445>] ext3_get_blocks_handle+0x1b8/0x367
[ 141.714778] [<c10ac76e>] ext3_getblk+0x97/0x228
[ 141.714786] [<c10ac919>] ext3_bread+0x1a/0x78
[ 141.714796] [<c10b1bc2>] ext3_mkdir+0xf4/0x270
[ 141.714803] [<c1072a6a>] vfs_mkdir+0xb3/0x161
[ 141.714811] [<c1072ba4>] sys_mkdirat+0x8c/0xc4
[ 141.714818] [<c1072bfc>] sys_mkdir+0x20/0x22
[ 141.714826] [<c1002f78>] syscall_call+0x7/0xb
[ 141.714836] [<ffffffff>] 0xffffffff
[ 141.714857]
[ 141.714858] -> #3 (&ei->truncate_mutex){--..}:
[ 141.714861] [<c10354b8>] check_prev_add+0x154/0x206
[ 141.714870] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 141.714880] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 141.714887] [<c1037624>] lock_acquire+0x62/0x81
[ 141.714894] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 141.714902] [<c1205b88>] mutex_lock+0x8/0xa
[ 141.714908] [<c10ae14f>] ext3_truncate+0x170/0x468
[ 141.714919] [<c1058e72>] vmtruncate+0xa6/0x116
[ 141.714927] [<c107d587>] inode_setattr+0x145/0x16c
[ 141.714935] [<c10af071>] ext3_setattr+0x150/0x22f
[ 141.714944] [<c107d909>] notify_change+0x35b/0x392
[ 141.714952] [<c10679d2>] do_truncate+0x52/0x75
[ 141.714963] [<c1071f5e>] may_open+0x1ec/0x231
[ 141.714971] [<c107211c>] open_namei+0xda/0x59b
[ 141.714978] [<c106863a>] do_filp_open+0x2c/0x53
[ 141.714986] [<c106896f>] do_sys_open+0x52/0xd8
[ 141.714994] [<c1068a11>] sys_open+0x1c/0x1e
[ 141.715004] [<c1002f78>] syscall_call+0x7/0xb
[ 141.715010] [<ffffffff>] 0xffffffff
[ 141.715020]
[ 141.715020] -> #2 (&inode->i_alloc_sem){--..}:
[ 141.715024] [<c10354b8>] check_prev_add+0x154/0x206
[ 141.715034] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 141.715045] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 141.715052] [<c1037624>] lock_acquire+0x62/0x81
[ 141.715058] [<c1032bf5>] down_write+0x2b/0x45
[ 141.715066] [<c107d890>] notify_change+0x2e2/0x392
[ 141.715073] [<c10679d2>] do_truncate+0x52/0x75
[ 141.715084] [<c1071f5e>] may_open+0x1ec/0x231
[ 141.715091] [<c107211c>] open_namei+0xda/0x59b
[ 141.715098] [<c106863a>] do_filp_open+0x2c/0x53
[ 141.715106] [<c106896f>] do_sys_open+0x52/0xd8
[ 141.715113] [<c1068a11>] sys_open+0x1c/0x1e
[ 141.715120] [<c1002f78>] syscall_call+0x7/0xb
[ 141.715129] [<ffffffff>] 0xffffffff
[ 141.715137]
[ 141.715138] -> #1 (&sysfs_inode_imutex_key){--..}:
[ 141.715143] [<c10354b8>] check_prev_add+0x154/0x206
[ 141.715151] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 141.715159] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 141.715166] [<c1037624>] lock_acquire+0x62/0x81
[ 141.715173] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 141.715181] [<c1205b88>] mutex_lock+0x8/0xa
[ 141.715188] [<c10a5447>] sysfs_hash_and_remove+0x43/0x11c
[ 141.715196] [<c10a5ef7>] sysfs_remove_file+0xd/0x12
[ 141.715206] [<c114b00c>] device_remove_file+0x32/0x44
[ 141.715213] [<c114b6d9>] device_del+0x174/0x1d2
[ 141.715220] [<c114b742>] device_unregister+0xb/0x15
[ 141.715228] [<c114b93d>] device_destroy+0x8d/0x9a
[ 141.715234] [<c1137a38>] vcs_remove_sysfs+0x1c/0x38
[ 141.715244] [<c113e0d8>] con_close+0x5e/0x6b
[ 141.715251] [<c1130103>] release_dev+0x4c4/0x6ce
[ 141.715260] [<c113077b>] tty_release+0x12/0x1c
[ 141.715268] [<c106a471>] __fput+0x145/0x16e
[ 141.715276] [<c106a32a>] fput+0x19/0x1b
[ 141.715285] [<c1068a92>] filp_close+0x3c/0x75
[ 141.715292] [<c1068b34>] sys_close+0x69/0xb4
[ 141.715299] [<c1002f78>] syscall_call+0x7/0xb
[ 141.715307] [<ffffffff>] 0xffffffff
[ 141.715316]
[ 141.715317] -> #0 (tty_mutex){--..}:
[ 141.715321] [<c1035398>] check_prev_add+0x34/0x206
[ 141.715332] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 141.715340] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 141.715347] [<c1037624>] lock_acquire+0x62/0x81
[ 141.715354] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 141.715362] [<c1205b88>] mutex_lock+0x8/0xa
[ 141.715371] [<c1098d79>] print_warning+0x8c/0x15d
[ 141.715378] [<c1099537>] dquot_alloc_space+0x184/0x189
[ 141.715387] [<c10a98e6>] ext3_new_blocks+0x44b/0x5a2
[ 141.715394] [<c10abe78>] ext3_alloc_blocks+0x40/0xdf
[ 141.715402] [<c10abf67>] ext3_alloc_branch+0x50/0x21b
[ 141.715412] [<c10ac445>] ext3_get_blocks_handle+0x1b8/0x367
[ 141.715420] [<c10ac66c>] ext3_get_block+0x78/0xe3
[ 141.715428] [<c108a239>] __block_prepare_write+0x168/0x3fd
[ 141.715437] [<c108ad10>] block_prepare_write+0x28/0x3b
[ 141.715445] [<c10acbcd>] ext3_prepare_write+0x3f/0x18d
[ 141.715455] [<c104dbe5>] generic_file_buffered_write+0x197/0x5e6
[ 141.715463] [<c104e2e2>] __generic_file_aio_write_nolock+0x2ae/0x5ad
[ 141.715472] [<c104e6ea>] generic_file_aio_write+0x58/0xc4
[ 141.715479] [<c10aa723>] ext3_file_write+0x2d/0xba
[ 141.715487] [<c1069441>] do_sync_write+0xc7/0x116
[ 141.715497] [<c1069612>] vfs_write+0x182/0x187
[ 141.715504] [<c10696b8>] sys_write+0x3d/0x64
[ 141.715512] [<c1002f78>] syscall_call+0x7/0xb
[ 141.715519] [<ffffffff>] 0xffffffff
[ 141.715527]
[ 141.715529] other info that might help us debug this:
[ 141.715531]
[ 141.715533] 3 locks held by tor/5534:
[ 141.715535] #0: (&inode->i_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 141.715542] #1: (&ei->truncate_mutex){--..}, at: [<c1205b88>] mutex_lock+0x8/0xa
[ 141.715548] #2: (&s->s_dquot.dqptr_sem){----}, at: [<c1099403>] dquot_alloc_space+0x50/0x189
[ 141.715555]
[ 141.715556] stack backtrace:
[ 141.715558] [<c1003d57>] show_trace_log_lvl+0x1a/0x30
[ 141.715563] [<c1003d7f>] show_trace+0x12/0x14
[ 141.715567] [<c1003e79>] dump_stack+0x16/0x18
[ 141.715573] [<c1034d6d>] print_circular_bug_tail+0x6f/0x71
[ 141.715578] [<c1035398>] check_prev_add+0x34/0x206
[ 141.715582] [<c10355d4>] check_prevs_add+0x6a/0xd5
[ 141.715586] [<c1036dd2>] __lock_acquire+0x61c/0xa05
[ 141.715591] [<c1037624>] lock_acquire+0x62/0x81
[ 141.715595] [<c1205c09>] __mutex_lock_slowpath+0x75/0x28c
[ 141.715599] [<c1205b88>] mutex_lock+0x8/0xa
[ 141.715602] [<c1098d79>] print_warning+0x8c/0x15d
[ 141.715606] [<c1099537>] dquot_alloc_space+0x184/0x189
[ 141.715612] [<c10a98e6>] ext3_new_blocks+0x44b/0x5a2
[ 141.715616] [<c10abe78>] ext3_alloc_blocks+0x40/0xdf
[ 141.715620] [<c10abf67>] ext3_alloc_branch+0x50/0x21b
[ 141.715624] [<c10ac445>] ext3_get_blocks_handle+0x1b8/0x367
[ 141.715629] [<c10ac66c>] ext3_get_block+0x78/0xe3
[ 141.715633] [<c108a239>] __block_prepare_write+0x168/0x3fd
[ 141.715638] [<c108ad10>] block_prepare_write+0x28/0x3b
[ 141.715641] [<c10acbcd>] ext3_prepare_write+0x3f/0x18d
[ 141.715647] [<c104dbe5>] generic_file_buffered_write+0x197/0x5e6
[ 141.715654] [<c104e2e2>] __generic_file_aio_write_nolock+0x2ae/0x5ad
[ 141.715658] [<c104e6ea>] generic_file_aio_write+0x58/0xc4
[ 141.715662] [<c10aa723>] ext3_file_write+0x2d/0xba
[ 141.715666] [<c1069441>] do_sync_write+0xc7/0x116
[ 141.715671] [<c1069612>] vfs_write+0x182/0x187
[ 141.715675] [<c10696b8>] sys_write+0x3d/0x64
[ 141.715679] [<c1002f78>] syscall_call+0x7/0xb
[ 141.715682] =======================
System is a P4 with HT, 3.2GHz, 2GB ram. Filesystem is ext3.
Folkert van Heusden
www.vanheusden.com/multitail - multitail is tail on steroids. multiple
windows, filtering, coloring, anything you can think of
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
reply other threads:[~2007-02-14 22:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070214215922.GW26684@vanheusden.com \
--to=folkert@vanheusden.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.