From: "John W. Linville" <linville@tuxdriver.com>
To: jeff@garzik.org
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: Please pull 'upstream' branch of wireless-2.6
Date: Mon, 7 May 2007 13:51:21 -0400 [thread overview]
Message-ID: <20070507175121.GF5125@tuxdriver.com> (raw)
The following changes since commit 15700770ef7c5d12e2f1659d2ddbeb3f658d9f37:
Linus Torvalds (1):
Merge git://git.kernel.org/.../sam/kbuild
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git upstream
Daniel Drake (1):
zd1211rw: Add ID for ZyXEL AG-225H v2
Geert Uytterhoeven (1):
mac80211: include <linux/delay.h> instead of <asm/delay.h>
Ivo van Doorn (1):
Add 93cx6 eeprom library
John W. Linville (1):
libertas: fix for wireless Kconfig changes
Larry Finger (3):
ieee80211: add ieee80211_channel_to_freq
ieee80211: include frequency in scan results
bcm43xx: Remove dead configuration variable CONFIG_947XX
Matthew Davidson (1):
zd1211rw: Add ID for Sitecom WL-117
Michael Wu (1):
Add rtl8187 wireless driver
Ulrich Kunitz (1):
zd1211rw: Added new USB id for Planex GW-US54ZGL
MAINTAINERS | 10 +
drivers/misc/Kconfig | 6 +
drivers/misc/Makefile | 1 +
drivers/misc/eeprom_93cx6.c | 347 +++++++++++
drivers/net/wireless/Kconfig | 4 +-
drivers/net/wireless/Makefile | 3 +
drivers/net/wireless/bcm43xx/bcm43xx.h | 18 +-
drivers/net/wireless/bcm43xx/bcm43xx_dma.c | 4 -
drivers/net/wireless/bcm43xx/bcm43xx_main.c | 81 ---
drivers/net/wireless/bcm43xx/bcm43xx_main.h | 19 -
drivers/net/wireless/rtl818x/Kconfig | 16 +
drivers/net/wireless/rtl818x/Makefile | 2 +
drivers/net/wireless/rtl818x/rtl8187.h | 125 ++++
drivers/net/wireless/rtl818x/rtl8187_dev.c | 730 +++++++++++++++++++++++
drivers/net/wireless/rtl818x/rtl8187_rtl8225.c | 744 ++++++++++++++++++++++++
drivers/net/wireless/rtl818x/rtl8187_rtl8225.h | 30 +
drivers/net/wireless/rtl818x/rtl818x.h | 212 +++++++
drivers/net/wireless/zd1211rw/zd_usb.c | 4 +
include/linux/eeprom_93cx6.h | 77 +++
include/net/ieee80211.h | 2 +
net/ieee80211/ieee80211_geo.c | 16 +
net/ieee80211/ieee80211_wx.c | 8 +-
net/mac80211/ieee80211_sta.c | 2 +-
23 files changed, 2338 insertions(+), 123 deletions(-)
create mode 100644 drivers/misc/eeprom_93cx6.c
create mode 100644 drivers/net/wireless/rtl818x/Kconfig
create mode 100644 drivers/net/wireless/rtl818x/Makefile
create mode 100644 drivers/net/wireless/rtl818x/rtl8187.h
create mode 100644 drivers/net/wireless/rtl818x/rtl8187_dev.c
create mode 100644 drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
create mode 100644 drivers/net/wireless/rtl818x/rtl8187_rtl8225.h
create mode 100644 drivers/net/wireless/rtl818x/rtl818x.h
create mode 100644 include/linux/eeprom_93cx6.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 0492dd8..c72774f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2935,6 +2935,16 @@ S: Maintained
RISCOM8 DRIVER
S: Orphan
+RTL818X WIRELESS DRIVER
+P: Michael Wu
+M: flamingice@sourmilk.net
+P: Andrea Merello
+M: andreamrl@tiscali.it
+L: linux-wireless@vger.kernel.org
+W: http://linuxwireless.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+S: Maintained
+
S3 SAVAGE FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a3c525b..607a180 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -178,4 +178,10 @@ config THINKPAD_ACPI_BAY
If you are not sure, say Y here.
+config EEPROM_93CX6
+ tristate "EEPROM 93CX6 support"
+ ---help---
+ This is a driver for the EEPROM chipsets 93c46 and 93c66.
+ The driver supports both read as well as write commands.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e325164..42b34a9 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
+obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
new file mode 100644
index 0000000..a948ddc
--- /dev/null
+++ b/drivers/misc/eeprom_93cx6.c
@@ -0,0 +1,347 @@
+/*
+ Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: eeprom_93cx6
+ Abstract: EEPROM reader routines for 93cx6 chipsets.
+ Supported chipsets: 93c46 & 93c66.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/delay.h>
+#include <linux/eeprom_93cx6.h>
+
+MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
+MODULE_VERSION("1.0");
+MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
+MODULE_LICENSE("GPL");
+
+static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+{
+ eeprom->reg_data_clock = 1;
+ eeprom->register_write(eeprom);
+ udelay(1);
+}
+
+static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+{
+ eeprom->reg_data_clock = 0;
+ eeprom->register_write(eeprom);
+ udelay(1);
+}
+
+static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
+{
+ /*
+ * Clear all flags, and enable chip select.
+ */
+ eeprom->register_read(eeprom);
+ eeprom->reg_data_in = 0;
+ eeprom->reg_data_out = 0;
+ eeprom->reg_data_clock = 0;
+ eeprom->reg_chip_select = 1;
+ eeprom->register_write(eeprom);
+
+ /*
+ * kick a pulse.
+ */
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
+{
+ /*
+ * Clear chip_select and data_in flags.
+ */
+ eeprom->register_read(eeprom);
+ eeprom->reg_data_in = 0;
+ eeprom->reg_chip_select = 0;
+ eeprom->register_write(eeprom);
+
+ /*
+ * kick a pulse.
+ */
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
+ const u16 data, const u16 count)
+{
+ unsigned int i;
+
+ eeprom->register_read(eeprom);
+
+ /*
+ * Clear data flags.
+ */
+ eeprom->reg_data_in = 0;
+ eeprom->reg_data_out = 0;
+
+ /*
+ * Start writing all bits.
+ */
+ for (i = count; i > 0; i--) {
+ /*
+ * Check if this bit needs to be set.
+ */
+ eeprom->reg_data_in = !!(data & (1 << (i - 1)));
+
+ /*
+ * Write the bit to the eeprom register.
+ */
+ eeprom->register_write(eeprom);
+
+ /*
+ * Kick a pulse.
+ */
+ eeprom_93cx6_pulse_high(eeprom);
+ eeprom_93cx6_pulse_low(eeprom);
+ }
+
+ eeprom->reg_data_in = 0;
+ eeprom->register_write(eeprom);
+}
+
+static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
+ u16 *data, const u16 count)
+{
+ unsigned int i;
+ u16 buf = 0;
+
+ eeprom->register_read(eeprom);
+
+ /*
+ * Clear data flags.
+ */
+ eeprom->reg_data_in = 0;
+ eeprom->reg_data_out = 0;
+
+ /*
+ * Start reading all bits.
+ */
+ for (i = count; i > 0; i--) {
+ eeprom_93cx6_pulse_high(eeprom);
+
+ eeprom->register_read(eeprom);
+
+ /*
+ * Clear data_in flag.
+ */
+ eeprom->reg_data_in = 0;
+
+ /*
+ * Read if the bit has been set.
+ */
+ if (eeprom->reg_data_out)
+ buf |= (1 << (i - 1));
+
+ eeprom_93cx6_pulse_low(eeprom);
+ }
+
+ *data = buf;
+}
+
+static void eeprom_93cx6_ewen(struct eeprom_93cx6 *eeprom)
+{
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the read opcode and the word to be read.
+ */
+ eeprom_93cx6_write_bits(eeprom, PCI_EEPROM_EWEN_OPCODE, 5);
+ eeprom_93cx6_write_bits(eeprom, 0, 6);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+}
+
+static void eeprom_93cx6_ewds(struct eeprom_93cx6 *eeprom)
+{
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the read opcode and the word to be read.
+ */
+ eeprom_93cx6_write_bits(eeprom, PCI_EEPROM_EWDS_OPCODE, 5);
+ eeprom_93cx6_write_bits(eeprom, 0, 6);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+}
+
+/**
+ * eeprom_93cx6_read - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ *
+ * This function will read the eeprom data as host-endian word
+ * into the given data pointer.
+ */
+void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
+ u16 *data)
+{
+ u16 command;
+
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the read opcode and the word to be read.
+ */
+ command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
+ eeprom_93cx6_write_bits(eeprom, command,
+ PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+ /*
+ * Read the requested 16 bits.
+ */
+ eeprom_93cx6_read_bits(eeprom, data, 16);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
+
+/**
+ * eeprom_93cx6_multiread - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ * @words: Number of words that should be read.
+ *
+ * This function will read all requested words from the eeprom,
+ * this is done by calling eeprom_93cx6_read() multiple times.
+ * But with the additional change that while the eeprom_93cx6_read
+ * will return host ordered bytes, this method will return little
+ * endian words.
+ */
+void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
+ __le16 *data, const u16 words)
+{
+ unsigned int i;
+ u16 tmp;
+
+ for (i = 0; i < words; i++) {
+ tmp = 0;
+ eeprom_93cx6_read(eeprom, word + i, &tmp);
+ data[i] = cpu_to_le16(tmp);
+ }
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
+
+/**
+ * eeprom_93cx6_write - Write multiple words to the eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start writing
+ * @data: Data that will be written
+ *
+ * This function will write the eeprom data as host-endian word
+ * from the given data pointer.
+ */
+void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, const u8 word,
+ u16 data)
+{
+ u16 command;
+
+ /*
+ * select the ewen opcode.
+ */
+ eeprom_93cx6_ewen(eeprom);
+
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the write opcode and the word to be read.
+ */
+ command = (PCI_EEPROM_WRITE_OPCODE << eeprom->width) | word;
+ eeprom_93cx6_write_bits(eeprom, command,
+ PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+ /*
+ * Write the requested 16 bits.
+ */
+ eeprom_93cx6_write_bits(eeprom, data, 16);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+
+ /*
+ * Take a short break.
+ */
+ msleep(10000);
+
+ /*
+ * select the ewen opcode.
+ */
+ eeprom_93cx6_ewds(eeprom);
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_write);
+
+
+/**
+ * eeprom_93cx6_multiwrite - Write multiple words to the eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start writing
+ * @data: Pointer where the information will be read from
+ * @words: Number of words that should be written.
+ *
+ * This function will write all requested words to the eeprom,
+ * this is done by calling eeprom_93cx6_write() multiple times.
+ * This method accepts little endian data, so it will first be
+ * converted into host endian.
+ */
+void eeprom_93cx6_multiwrite(struct eeprom_93cx6 *eeprom, const u8 word,
+ __le16 *data, const u16 words)
+{
+ unsigned int i;
+
+ for (i = 0; i < words; i++)
+ eeprom_93cx6_write(eeprom, word + i, le16_to_cpu(data[i]));
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multiwrite);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 0184614..6ff5a8a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -267,7 +267,7 @@ config IPW2200_DEBUG
config LIBERTAS_USB
tristate "Marvell Libertas 8388 802.11a/b/g cards"
- depends on NET_RADIO && USB
+ depends on USB && WLAN_80211
select FW_LOADER
---help---
A driver for Marvell Libertas 8388 USB devices.
@@ -542,4 +542,6 @@ source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
+source "drivers/net/wireless/rtl818x/Kconfig"
+
endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index d212460..198c992 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -44,3 +44,6 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS_USB) += libertas/
+
+# Drivers using mac80211 stack (net/mac80211)
+obj-$(CONFIG_RTL818X) += rtl818x/
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index f8483c1..10e07e8 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -658,12 +658,6 @@ struct bcm43xx_pio {
#define BCM43xx_MAX_80211_CORES 2
-#ifdef CONFIG_BCM947XX
-#define core_offset(bcm) (bcm)->current_core_offset
-#else
-#define core_offset(bcm) 0
-#endif
-
/* Generic information about a core. */
struct bcm43xx_coreinfo {
u8 available:1,
@@ -789,10 +783,6 @@ struct bcm43xx_private {
/* The currently active core. */
struct bcm43xx_coreinfo *current_core;
-#ifdef CONFIG_BCM947XX
- /** current core memory offset */
- u32 current_core_offset;
-#endif
struct bcm43xx_coreinfo *active_80211_core;
/* coreinfo structs for all possible cores follow.
* Note that a core might not exist.
@@ -943,25 +933,25 @@ struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy,
static inline
u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
{
- return ioread16(bcm->mmio_addr + core_offset(bcm) + offset);
+ return ioread16(bcm->mmio_addr + offset);
}
static inline
void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value)
{
- iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset);
+ iowrite16(value, bcm->mmio_addr + offset);
}
static inline
u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset)
{
- return ioread32(bcm->mmio_addr + core_offset(bcm) + offset);
+ return ioread32(bcm->mmio_addr + offset);
}
static inline
void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value)
{
- iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset);
+ iowrite32(value, bcm->mmio_addr + offset);
}
static inline
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
index e3d2e61..1f7731f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -660,10 +660,6 @@ struct bcm43xx_dmaring * bcm43xx_setup_dmaring(struct bcm43xx_private *bcm,
ring->routing = BCM43xx_DMA32_CLIENTTRANS;
if (dma64)
ring->routing = BCM43xx_DMA64_CLIENTTRANS;
-#ifdef CONFIG_BCM947XX
- if (bcm->pci_dev->bus->number == 0)
- ring->routing = dma64 ? BCM43xx_DMA64_NOTRANS : BCM43xx_DMA32_NOTRANS;
-#endif
ring->bcm = bcm;
ring->nr_slots = nr_slots;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 5e96bca..ef6b253 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -61,10 +61,6 @@ MODULE_AUTHOR("Stefano Brivio");
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
-#ifdef CONFIG_BCM947XX
-extern char *nvram_get(char *name);
-#endif
-
#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO)
static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
@@ -142,10 +138,6 @@ MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for using multiple fi
{ PCI_VENDOR_ID_BROADCOM, 0x4324, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 43XG 802.11b/g */
{ PCI_VENDOR_ID_BROADCOM, 0x4325, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-#ifdef CONFIG_BCM947XX
- /* SB bus on BCM947xx */
- { PCI_VENDOR_ID_BROADCOM, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-#endif
{ 0 },
};
MODULE_DEVICE_TABLE(pci, bcm43xx_pci_tbl);
@@ -786,9 +778,6 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
{
u16 value;
u16 *sprom;
-#ifdef CONFIG_BCM947XX
- char *c;
-#endif
sprom = kzalloc(BCM43xx_SPROM_SIZE * sizeof(u16),
GFP_KERNEL);
@@ -796,28 +785,7 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
printk(KERN_ERR PFX "sprom_extract OOM\n");
return -ENOMEM;
}
-#ifdef CONFIG_BCM947XX
- sprom[BCM43xx_SPROM_BOARDFLAGS2] = atoi(nvram_get("boardflags2"));
- sprom[BCM43xx_SPROM_BOARDFLAGS] = atoi(nvram_get("boardflags"));
-
- if ((c = nvram_get("il0macaddr")) != NULL)
- e_aton(c, (char *) &(sprom[BCM43xx_SPROM_IL0MACADDR]));
-
- if ((c = nvram_get("et1macaddr")) != NULL)
- e_aton(c, (char *) &(sprom[BCM43xx_SPROM_ET1MACADDR]));
-
- sprom[BCM43xx_SPROM_PA0B0] = atoi(nvram_get("pa0b0"));
- sprom[BCM43xx_SPROM_PA0B1] = atoi(nvram_get("pa0b1"));
- sprom[BCM43xx_SPROM_PA0B2] = atoi(nvram_get("pa0b2"));
-
- sprom[BCM43xx_SPROM_PA1B0] = atoi(nvram_get("pa1b0"));
- sprom[BCM43xx_SPROM_PA1B1] = atoi(nvram_get("pa1b1"));
- sprom[BCM43xx_SPROM_PA1B2] = atoi(nvram_get("pa1b2"));
-
- sprom[BCM43xx_SPROM_BOARDREV] = atoi(nvram_get("boardrev"));
-#else
bcm43xx_sprom_read(bcm, sprom);
-#endif
/* boardflags2 */
value = sprom[BCM43xx_SPROM_BOARDFLAGS2];
@@ -1225,12 +1193,6 @@ static int _switch_core(struct bcm43xx_private *bcm, int core)
goto error;
udelay(10);
}
-#ifdef CONFIG_BCM947XX
- if (bcm->pci_dev->bus->number == 0)
- bcm->current_core_offset = 0x1000 * core;
- else
- bcm->current_core_offset = 0;
-#endif
return 0;
error:
@@ -1387,19 +1349,6 @@ void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy)
if ((bcm43xx_core_enabled(bcm)) &&
!bcm43xx_using_pio(bcm)) {
-//FIXME: Do we _really_ want #ifndef CONFIG_BCM947XX here?
-#if 0
-#ifndef CONFIG_BCM947XX
- /* reset all used DMA controllers. */
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA1_BASE);
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA2_BASE);
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA3_BASE);
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA4_BASE);
- bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA1_BASE);
- if (bcm->current_core->rev < 5)
- bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA4_BASE);
-#endif
-#endif
}
if (bcm43xx_status(bcm) == BCM43xx_STAT_SHUTTINGDOWN) {
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
@@ -2140,32 +2089,11 @@ out:
return err;
}
-#ifdef CONFIG_BCM947XX
-static struct pci_device_id bcm43xx_47xx_ids[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
- { 0 }
-};
-#endif
-
static int bcm43xx_initialize_irq(struct bcm43xx_private *bcm)
{
int err;
bcm->irq = bcm->pci_dev->irq;
-#ifdef CONFIG_BCM947XX
- if (bcm->pci_dev->bus->number == 0) {
- struct pci_dev *d;
- struct pci_device_id *id;
- for (id = bcm43xx_47xx_ids; id->vendor; id++) {
- d = pci_get_device(id->vendor, id->device, NULL);
- if (d != NULL) {
- bcm->irq = d->irq;
- pci_dev_put(d);
- break;
- }
- }
- }
-#endif
err = request_irq(bcm->irq, bcm43xx_interrupt_handler,
IRQF_SHARED, KBUILD_MODNAME, bcm);
if (err)
@@ -2645,10 +2573,6 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
chip_id_16 = 0x4610;
else if ((pci_device >= 0x4710) && (pci_device <= 0x4715))
chip_id_16 = 0x4710;
-#ifdef CONFIG_BCM947XX
- else if ((pci_device >= 0x4320) && (pci_device <= 0x4325))
- chip_id_16 = 0x4309;
-#endif
else {
printk(KERN_ERR PFX "Could not determine Chip ID\n");
return -ENODEV;
@@ -4144,11 +4068,6 @@ static int __devinit bcm43xx_init_one(struct pci_dev *pdev,
struct bcm43xx_private *bcm;
int err;
-#ifdef CONFIG_BCM947XX
- if ((pdev->bus->number == 0) && (pdev->device != 0x0800))
- return -ENODEV;
-#endif
-
#ifdef DEBUG_SINGLE_DEVICE_ONLY
if (strcmp(pci_name(pdev), DEBUG_SINGLE_DEVICE_ONLY))
return -ENODEV;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
index f763571..c8f3c53 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -33,25 +33,6 @@
#include "bcm43xx.h"
-#ifdef CONFIG_BCM947XX
-#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-
-static inline void e_aton(char *str, char *dest)
-{
- int i = 0;
- u16 *d = (u16 *) dest;
-
- for (;;) {
- dest[i++] = (char) simple_strtoul(str, NULL, 16);
- str += 2;
- if (!*str++ || i == 6)
- break;
- }
- for (i = 0; i < 3; i++)
- d[i] = cpu_to_be16(d[i]);
-}
-#endif
-
#define P4D_BYT3S(magic, nr_bytes) u8 __p4dding##magic[nr_bytes]
#define P4D_BYTES(line, nr_bytes) P4D_BYT3S(line, nr_bytes)
/* Magic helper macro to pad structures. Ignore those above. It's magic. */
diff --git a/drivers/net/wireless/rtl818x/Kconfig b/drivers/net/wireless/rtl818x/Kconfig
new file mode 100644
index 0000000..e2c27f8
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/Kconfig
@@ -0,0 +1,16 @@
+config RTL818X
+ bool
+ default n
+
+config RTL8187
+ tristate "Realtek 8187 USB support"
+ depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
+ select RTL818X
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8187 based cards.
+ These are USB based chips found in cards such as:
+
+ Netgear WG111v2
+
+ Thanks to Realtek for their support!
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile
new file mode 100644
index 0000000..fe5dd6f
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/Makefile
@@ -0,0 +1,2 @@
+rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o
+obj-$(CONFIG_RTL8187) += rtl8187.o
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
new file mode 100644
index 0000000..bd0b6f9
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -0,0 +1,125 @@
+#ifndef RTL8187_H
+#define RTL8187_H
+
+#include "rtl818x.h"
+
+#define RTL8187_REQT_READ 0xC0
+#define RTL8187_REQT_WRITE 0x40
+#define RTL8187_REQ_GET_REG 0x05
+#define RTL8187_REQ_SET_REG 0x05
+
+#define RTL8187_MAX_RX 0x9C4
+
+struct rtl8187_rx_info {
+ struct urb *urb;
+ struct ieee80211_hw *dev;
+};
+
+struct rtl8187_rx_hdr {
+ __le16 len;
+ __le16 rate;
+ u8 noise;
+ u8 signal;
+ u8 agc;
+ u8 reserved;
+ __le64 mac_time;
+} __attribute__((packed));
+
+struct rtl8187_tx_info {
+ struct ieee80211_tx_control *control;
+ struct urb *urb;
+ struct ieee80211_hw *dev;
+};
+
+struct rtl8187_tx_hdr {
+ __le32 flags;
+#define RTL8187_TX_FLAG_NO_ENCRYPT (1 << 15)
+#define RTL8187_TX_FLAG_MORE_FRAG (1 << 17)
+#define RTL8187_TX_FLAG_CTS (1 << 18)
+#define RTL8187_TX_FLAG_RTS (1 << 23)
+ __le16 rts_duration;
+ __le16 len;
+ __le32 retry;
+} __attribute__((packed));
+
+struct rtl8187_priv {
+ /* common between rtl818x drivers */
+ struct rtl818x_csr *map;
+ void (*rf_init)(struct ieee80211_hw *);
+ int mode;
+
+ /* rtl8187 specific */
+ struct ieee80211_channel channels[14];
+ struct ieee80211_rate rates[12];
+ struct ieee80211_hw_mode modes[2];
+ struct usb_device *udev;
+ u8 *hwaddr;
+ u16 txpwr_base;
+ u8 asic_rev;
+ struct sk_buff_head rx_queue;
+};
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
+
+static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
+{
+ u8 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return val;
+}
+
+static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
+{
+ __le16 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return le16_to_cpu(val);
+}
+
+static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
+{
+ __le32 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return le32_to_cpu(val);
+}
+
+static inline void rtl818x_iowrite8(struct rtl8187_priv *priv,
+ u8 *addr, u8 val)
+{
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+}
+
+static inline void rtl818x_iowrite16(struct rtl8187_priv *priv,
+ __le16 *addr, u16 val)
+{
+ __le16 buf = cpu_to_le16(val);
+
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ (unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
+}
+
+static inline void rtl818x_iowrite32(struct rtl8187_priv *priv,
+ __le32 *addr, u32 val)
+{
+ __le32 buf = cpu_to_le32(val);
+
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ (unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
+}
+
+#endif /* RTL8187_H */
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
new file mode 100644
index 0000000..8f9e781
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -0,0 +1,730 @@
+
+/*
+ * Linux device driver for RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8187_rtl8225.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
+MODULE_DESCRIPTION("RTL8187 USB wireless driver");
+MODULE_LICENSE("GPL");
+
+static struct usb_device_id rtl8187_table[] __devinitdata = {
+ /* Realtek */
+ {USB_DEVICE(0x0bda, 0x8187)},
+ /* Netgear */
+ {USB_DEVICE(0x0846, 0x6100)},
+ {USB_DEVICE(0x0846, 0x6a00)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8187_table);
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ data <<= 8;
+ data |= addr | 0x80;
+
+ rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
+
+ mdelay(1);
+}
+
+static void rtl8187_tx_cb(struct urb *urb)
+{
+ struct ieee80211_tx_status status = { {0} };
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
+ struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
+
+ usb_free_urb(info->urb);
+ if (info->control)
+ memcpy(&status.control, info->control, sizeof(status.control));
+ kfree(info->control);
+ skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
+ status.flags |= IEEE80211_TX_STATUS_ACK;
+ ieee80211_tx_status_irqsafe(info->dev, skb, &status);
+}
+
+static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_tx_hdr *hdr;
+ struct rtl8187_tx_info *info;
+ struct urb *urb;
+ u32 tmp;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
+ tmp = skb->len - sizeof(*hdr);
+ tmp |= RTL8187_TX_FLAG_NO_ENCRYPT;
+ tmp |= control->rts_cts_rate << 19;
+ tmp |= control->tx_rate << 24;
+ if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
+ tmp |= RTL8187_TX_FLAG_MORE_FRAG;
+ if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
+ tmp |= RTL8187_TX_FLAG_RTS;
+ hdr->rts_duration =
+ ieee80211_rts_duration(dev, skb->len, control);
+ }
+ if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+ tmp |= RTL8187_TX_FLAG_CTS;
+ hdr->flags = cpu_to_le32(tmp);
+ hdr->len = 0;
+ tmp = control->retry_limit << 8;
+ hdr->retry = cpu_to_le32(tmp);
+
+ info = (struct rtl8187_tx_info *)skb->cb;
+ info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
+ info->urb = urb;
+ info->dev = dev;
+ usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
+ hdr, skb->len, rtl8187_tx_cb, skb);
+ usb_submit_urb(urb, GFP_ATOMIC);
+
+ return 0;
+}
+
+static void rtl8187_rx_cb(struct urb *urb)
+{
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
+ struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
+ struct ieee80211_hw *dev = info->dev;
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_rx_hdr *hdr;
+ struct ieee80211_rx_status rx_status = { 0 };
+ int rate, signal;
+
+ if (unlikely(urb->status)) {
+ info->urb = NULL;
+ usb_free_urb(urb);
+ return;
+ }
+
+ skb_unlink(skb, &priv->rx_queue);
+ skb_put(skb, urb->actual_length);
+ hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
+ skb_trim(skb, le16_to_cpu(hdr->len) & 0x0FFF);
+
+ signal = hdr->agc >> 1;
+ rate = (le16_to_cpu(hdr->rate) >> 4) & 0xF;
+ if (rate > 3) { /* OFDM rate */
+ if (signal > 90)
+ signal = 90;
+ else if (signal < 25)
+ signal = 25;
+ signal = 90 - signal;
+ } else { /* CCK rate */
+ if (signal > 95)
+ signal = 95;
+ else if (signal < 30)
+ signal = 30;
+ signal = 95 - signal;
+ }
+
+ rx_status.antenna = (hdr->signal >> 7) & 1;
+ rx_status.signal = 64 - min(hdr->noise, (u8)64);
+ rx_status.ssi = signal;
+ rx_status.rate = rate;
+ rx_status.freq = dev->conf.freq;
+ rx_status.channel = dev->conf.channel;
+ rx_status.phymode = dev->conf.phymode;
+ rx_status.mactime = le64_to_cpu(hdr->mac_time);
+ ieee80211_rx_irqsafe(dev, skb, &rx_status);
+
+ skb = dev_alloc_skb(RTL8187_MAX_RX);
+ if (unlikely(!skb)) {
+ usb_free_urb(urb);
+ /* TODO check rx queue length and refill *somewhere* */
+ return;
+ }
+
+ info = (struct rtl8187_rx_info *)skb->cb;
+ info->urb = urb;
+ info->dev = dev;
+ urb->transfer_buffer = skb_tail_pointer(skb);
+ urb->context = skb;
+ skb_queue_tail(&priv->rx_queue, skb);
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int rtl8187_init_urbs(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct urb *entry;
+ struct sk_buff *skb;
+ struct rtl8187_rx_info *info;
+
+ while (skb_queue_len(&priv->rx_queue) < 8) {
+ skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
+ if (!skb)
+ break;
+ entry = usb_alloc_urb(0, GFP_KERNEL);
+ if (!entry) {
+ kfree_skb(skb);
+ break;
+ }
+ usb_fill_bulk_urb(entry, priv->udev,
+ usb_rcvbulkpipe(priv->udev, 1),
+ skb_tail_pointer(skb),
+ RTL8187_MAX_RX, rtl8187_rx_cb, skb);
+ info = (struct rtl8187_rx_info *)skb->cb;
+ info->urb = entry;
+ info->dev = dev;
+ skb_queue_tail(&priv->rx_queue, skb);
+ usb_submit_urb(entry, GFP_KERNEL);
+ }
+
+ return 0;
+}
+
+static int rtl8187_init_hw(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg;
+ int i;
+
+ /* reset */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ mdelay(200);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
+ mdelay(200);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= (1 << 1);
+ reg |= RTL818X_CMD_RESET;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ i = 10;
+ do {
+ mdelay(2);
+ if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
+ RTL818X_CMD_RESET))
+ break;
+ } while (--i);
+
+ if (!i) {
+ printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
+ return -ETIMEDOUT;
+ }
+
+ /* reload registers from eeprom */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+
+ i = 10;
+ do {
+ mdelay(4);
+ if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
+ RTL818X_EEPROM_CMD_CONFIG))
+ break;
+ } while (--i);
+
+ if (!i) {
+ printk(KERN_ERR "%s: eeprom reset timeout!\n",
+ wiphy_name(dev->wiphy));
+ return -ETIMEDOUT;
+ }
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ /* setup card */
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 4);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->MAC[i], priv->hwaddr[i]);
+
+ rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+ reg &= 0x3F;
+ reg |= 0x80;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+ rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+ rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+
+ // TODO: set RESP_RATE and BRSR properly
+ rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+ /* host_usb_init */
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
+ rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
+ rtl818x_iowrite8(priv, (u8 *)0xFF85, 4);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
+ mdelay(100);
+
+ rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+ rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
+ mdelay(100);
+
+ priv->rf_init(dev);
+
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+ reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & 0xfffe;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 0x1);
+ rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
+ rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
+ rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+
+ return 0;
+}
+
+static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
+{
+ u32 reg;
+ struct rtl8187_priv *priv = dev->priv;
+
+ reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+ /* Enable TX loopback on MAC level to avoid TX during channel
+ * changes, as this has be seen to causes problems and the
+ * card will stop work until next reset
+ */
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+ reg | RTL818X_TX_CONF_LOOPBACK_MAC);
+ mdelay(10);
+ rtl8225_rf_set_channel(dev, channel);
+ mdelay(10);
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+}
+
+static int rtl8187_open(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u32 reg;
+ int ret;
+
+ ret = rtl8187_init_hw(dev);
+ if (ret)
+ return ret;
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+ rtl8187_init_urbs(dev);
+
+ reg = RTL818X_RX_CONF_ONLYERLPKT |
+ RTL818X_RX_CONF_RX_AUTORESETPHY |
+ RTL818X_RX_CONF_BSSID |
+ RTL818X_RX_CONF_MGMT |
+ RTL818X_RX_CONF_CTRL |
+ RTL818X_RX_CONF_DATA |
+ (7 << 13 /* RX FIFO threshold NONE */) |
+ (7 << 10 /* MAX RX DMA */) |
+ RTL818X_RX_CONF_BROADCAST |
+ RTL818X_RX_CONF_MULTICAST |
+ RTL818X_RX_CONF_NICMAC;
+ if (priv->mode == IEEE80211_IF_TYPE_MNTR)
+ reg |= RTL818X_RX_CONF_MONITOR;
+
+ rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+ rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+ reg = RTL818X_TX_CONF_CW_MIN |
+ (7 << 21 /* MAX TX DMA */) |
+ RTL818X_TX_CONF_NO_ICV;
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg |= RTL818X_CMD_TX_ENABLE;
+ reg |= RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ return 0;
+}
+
+static int rtl8187_stop(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_rx_info *info;
+ struct sk_buff *skb;
+ u32 reg;
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= ~RTL818X_CMD_TX_ENABLE;
+ reg &= ~RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ rtl8225_rf_stop(dev);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ while ((skb = skb_dequeue(&priv->rx_queue))) {
+ info = (struct rtl8187_rx_info *)skb->cb;
+ if (!info->urb)
+ continue;
+
+ usb_kill_urb(info->urb);
+ kfree_skb(skb);
+ }
+ return 0;
+}
+
+static int rtl8187_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ /* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
+ if (priv->mode != IEEE80211_IF_TYPE_MGMT)
+ return -1;
+
+ switch (conf->type) {
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_MNTR:
+ priv->mode = conf->type;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ priv->hwaddr = conf->mac_addr;
+
+ return 0;
+}
+
+static void rtl8187_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+}
+
+static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ rtl8187_set_channel(dev, conf->channel);
+
+ rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+
+ if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
+ rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
+ else
+ rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
+
+ switch (conf->phymode) {
+ case MODE_IEEE80211B:
+ rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
+ rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
+ break;
+ case MODE_IEEE80211G:
+ rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
+ rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
+ rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
+ rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
+ rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
+ return 0;
+}
+
+static int rtl8187_config_interface(struct ieee80211_hw *dev, int if_id,
+ struct ieee80211_if_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
+
+ if (is_valid_ether_addr(conf->bssid))
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
+ else
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
+
+ return 0;
+}
+
+static const struct ieee80211_ops rtl8187_ops = {
+ .tx = rtl8187_tx,
+ .open = rtl8187_open,
+ .stop = rtl8187_stop,
+ .add_interface = rtl8187_add_interface,
+ .remove_interface = rtl8187_remove_interface,
+ .config = rtl8187_config,
+ .config_interface = rtl8187_config_interface,
+};
+
+static void rtl8187_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct ieee80211_hw *dev = eeprom->data;
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+ eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+ eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+ eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+ eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8187_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct ieee80211_hw *dev = eeprom->data;
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
+
+ if (eeprom->reg_data_in)
+ reg |= RTL818X_EEPROM_CMD_WRITE;
+ if (eeprom->reg_data_out)
+ reg |= RTL818X_EEPROM_CMD_READ;
+ if (eeprom->reg_data_clock)
+ reg |= RTL818X_EEPROM_CMD_CK;
+ if (eeprom->reg_chip_select)
+ reg |= RTL818X_EEPROM_CMD_CS;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+ udelay(10);
+}
+
+static int __devinit rtl8187_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct ieee80211_hw *dev;
+ struct rtl8187_priv *priv;
+ struct eeprom_93cx6 eeprom;
+ struct ieee80211_channel *channel;
+ u16 txpwr, reg;
+ int err, i;
+
+ dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
+ if (!dev) {
+ printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
+ return -ENOMEM;
+ }
+
+ priv = dev->priv;
+
+ SET_IEEE80211_DEV(dev, &intf->dev);
+ usb_set_intfdata(intf, dev);
+ priv->udev = udev;
+
+ usb_get_dev(udev);
+
+ skb_queue_head_init(&priv->rx_queue);
+ memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+ memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+ priv->map = (struct rtl818x_csr *)0xFF00;
+ priv->modes[0].mode = MODE_IEEE80211G;
+ priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
+ priv->modes[0].rates = priv->rates;
+ priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels);
+ priv->modes[0].channels = priv->channels;
+ priv->modes[1].mode = MODE_IEEE80211B;
+ priv->modes[1].num_rates = 4;
+ priv->modes[1].rates = priv->rates;
+ priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
+ priv->modes[1].channels = priv->channels;
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+ dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_WEP_INCLUDE_IV |
+ IEEE80211_HW_DATA_NULLFUNC_ACK;
+ dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
+ dev->queues = 1;
+ dev->max_rssi = 65;
+ dev->max_signal = 64;
+
+ for (i = 0; i < 2; i++)
+ if ((err = ieee80211_register_hwmode(dev, &priv->modes[i])))
+ goto err_free_dev;
+
+ eeprom.data = dev;
+ eeprom.register_read = rtl8187_register_read;
+ eeprom.register_write = rtl8187_register_write;
+ if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+ eeprom.width = PCI_EEPROM_WIDTH_93C66;
+ else
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ udelay(10);
+
+ eeprom_93cx6_multiread(&eeprom, 0x7,
+ (__le16 __force *)dev->wiphy->perm_addr, 3);
+ if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+ printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly generated MAC address\n");
+ random_ether_addr(dev->wiphy->perm_addr);
+ }
+
+ channel = priv->channels;
+ for (i = 0; i < 3; i++) {
+ eeprom_93cx6_read(&eeprom, 0x16 + i, &txpwr);
+ (*channel++).val = txpwr & 0xFF;
+ (*channel++).val = txpwr >> 8;
+ }
+ for (i = 0; i < 2; i++) {
+ eeprom_93cx6_read(&eeprom, 0x3D + i, &txpwr);
+ (*channel++).val = txpwr & 0xFF;
+ (*channel++).val = txpwr >> 8;
+ }
+ for (i = 0; i < 2; i++) {
+ eeprom_93cx6_read(&eeprom, 0x1B + i, &txpwr);
+ (*channel++).val = txpwr & 0xFF;
+ (*channel++).val = txpwr >> 8;
+ }
+
+ eeprom_93cx6_read(&eeprom, 0x05, &priv->txpwr_base);
+
+ reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & ~1;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 1);
+ /* 0 means asic B-cut, we should use SW 3 wire
+ * bit-by-bit banging for radio. 1 means we can use
+ * USB specific request to write radio registers */
+ priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl8225_write(dev, 0, 0x1B7);
+
+ if (rtl8225_read(dev, 8) != 0x588 || rtl8225_read(dev, 9) != 0x700)
+ priv->rf_init = rtl8225_rf_init;
+ else
+ priv->rf_init = rtl8225z2_rf_init;
+
+ rtl8225_write(dev, 0, 0x0B7);
+
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ printk(KERN_ERR "rtl8187: Cannot register device\n");
+ goto err_free_dev;
+ }
+
+ printk(KERN_INFO "%s: hwaddr " MAC_FMT ", rtl8187 V%d + %s\n",
+ wiphy_name(dev->wiphy), MAC_ARG(dev->wiphy->perm_addr),
+ priv->asic_rev, priv->rf_init == rtl8225_rf_init ?
+ "rtl8225" : "rtl8225z2");
+
+ return 0;
+
+ err_free_dev:
+ ieee80211_free_hw(dev);
+ usb_set_intfdata(intf, NULL);
+ usb_put_dev(udev);
+ return err;
+}
+
+static void __devexit rtl8187_disconnect(struct usb_interface *intf)
+{
+ struct ieee80211_hw *dev = usb_get_intfdata(intf);
+ struct rtl8187_priv *priv;
+
+ if (!dev)
+ return;
+
+ ieee80211_unregister_hw(dev);
+
+ priv = dev->priv;
+ usb_put_dev(interface_to_usbdev(intf));
+ ieee80211_free_hw(dev);
+}
+
+static struct usb_driver rtl8187_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtl8187_table,
+ .probe = rtl8187_probe,
+ .disconnect = rtl8187_disconnect,
+};
+
+static int __init rtl8187_init(void)
+{
+ return usb_register(&rtl8187_driver);
+}
+
+static void __exit rtl8187_exit(void)
+{
+ usb_deregister(&rtl8187_driver);
+}
+
+module_init(rtl8187_init);
+module_exit(rtl8187_exit);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
new file mode 100644
index 0000000..a89f023
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -0,0 +1,744 @@
+
+/*
+ * Radio tuning for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8187_rtl8225.h"
+
+static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u16 reg80, reg84, reg82;
+ u32 bangdata;
+ int i;
+
+ bangdata = (data << 4) | (addr & 0xf);
+
+ reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
+ reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
+
+ reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7);
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+ udelay(10);
+
+ for (i = 15; i >= 0; i--) {
+ u16 reg = reg80 | (bangdata & (1 << i)) >> i;
+
+ if (i & 1)
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+
+ if (!(i & 1))
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+ mdelay(2);
+}
+
+static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u16 reg80, reg82, reg84;
+
+ reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+ reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+ reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+ reg80 &= ~(0x3 << 2);
+ reg84 &= ~0xF;
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007);
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(2);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+ udelay(10);
+
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ addr, 0x8225, &data, sizeof(data), HZ / 2);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+ mdelay(2);
+}
+
+void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ if (priv->asic_rev)
+ rtl8225_write_8051(dev, addr, data);
+ else
+ rtl8225_write_bitbang(dev, addr, data);
+}
+
+u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u16 reg80, reg82, reg84, out;
+ int i;
+
+ reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+ reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+ reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+ reg80 &= ~0xF;
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(4);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+ udelay(5);
+
+ for (i = 4; i >= 0; i--) {
+ u16 reg = reg80 | ((addr >> i) & 1);
+
+ if (!(i & 1)) {
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+ udelay(1);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg | (1 << 1));
+ udelay(2);
+
+ if (i & 1) {
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+ udelay(1);
+ }
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(2);
+
+ out = 0;
+ for (i = 11; i >= 0; i--) {
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(1);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+
+ if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
+ out |= 1 << i;
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(2);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 2));
+ udelay(2);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
+
+ return out;
+}
+
+static const u16 rtl8225bcd_rxgain[] = {
+ 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+ 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+ 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+ 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+ 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+ 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+ 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+ 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+ 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+ 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+ 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
+ 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
+};
+
+static const u8 rtl8225_agc[] = {
+ 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
+ 0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
+ 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
+ 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
+ 0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
+ 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
+ 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
+ 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
+ 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
+ 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
+ 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
+ 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
+ 0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
+};
+
+static const u8 rtl8225_gain[] = {
+ 0x23, 0x88, 0x7c, 0xa5, /* -82dBm */
+ 0x23, 0x88, 0x7c, 0xb5, /* -82dBm */
+ 0x23, 0x88, 0x7c, 0xc5, /* -82dBm */
+ 0x33, 0x80, 0x79, 0xc5, /* -78dBm */
+ 0x43, 0x78, 0x76, 0xc5, /* -74dBm */
+ 0x53, 0x60, 0x73, 0xc5, /* -70dBm */
+ 0x63, 0x58, 0x70, 0xc5, /* -66dBm */
+};
+
+static const u8 rtl8225_threshold[] = {
+ 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
+};
+
+static const u8 rtl8225_tx_gain_cck_ofdm[] = {
+ 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225_tx_power_cck[] = {
+ 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+ 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+ 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+ 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+ 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+ 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225_tx_power_cck_ch14[] = {
+ 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+ 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+ 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+ 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+ 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+ 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225_tx_power_ofdm[] = {
+ 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225_chan[] = {
+ 0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
+ 0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
+};
+
+static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 cck_power, ofdm_power;
+ const u8 *tmp;
+ u32 reg;
+ int i;
+
+ cck_power = priv->channels[channel - 1].val & 0xF;
+ ofdm_power = priv->channels[channel - 1].val >> 4;
+
+ cck_power = min(cck_power, (u8)11);
+ ofdm_power = min(ofdm_power, (u8)35);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+ rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+
+ if (channel == 14)
+ tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
+ else
+ tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
+
+ for (i = 0; i < 8; i++)
+ rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+ mdelay(1); // FIXME: optional?
+
+ /* anaparam2 on */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl8225_write_phy_ofdm(dev, 2, 0x42);
+ rtl8225_write_phy_ofdm(dev, 6, 0x00);
+ rtl8225_write_phy_ofdm(dev, 8, 0x00);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+ rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
+
+ tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
+
+ rtl8225_write_phy_ofdm(dev, 5, *tmp);
+ rtl8225_write_phy_ofdm(dev, 7, *tmp);
+
+ mdelay(1);
+}
+
+void rtl8225_rf_init(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ rtl8225_write(dev, 0x0, 0x067); mdelay(1);
+ rtl8225_write(dev, 0x1, 0xFE0); mdelay(1);
+ rtl8225_write(dev, 0x2, 0x44D); mdelay(1);
+ rtl8225_write(dev, 0x3, 0x441); mdelay(1);
+ rtl8225_write(dev, 0x4, 0x486); mdelay(1);
+ rtl8225_write(dev, 0x5, 0xBC0); mdelay(1);
+ rtl8225_write(dev, 0x6, 0xAE6); mdelay(1);
+ rtl8225_write(dev, 0x7, 0x82A); mdelay(1);
+ rtl8225_write(dev, 0x8, 0x01F); mdelay(1);
+ rtl8225_write(dev, 0x9, 0x334); mdelay(1);
+ rtl8225_write(dev, 0xA, 0xFD4); mdelay(1);
+ rtl8225_write(dev, 0xB, 0x391); mdelay(1);
+ rtl8225_write(dev, 0xC, 0x050); mdelay(1);
+ rtl8225_write(dev, 0xD, 0x6DB); mdelay(1);
+ rtl8225_write(dev, 0xE, 0x029); mdelay(1);
+ rtl8225_write(dev, 0xF, 0x914); mdelay(100);
+
+ rtl8225_write(dev, 0x2, 0xC4D); mdelay(200);
+ rtl8225_write(dev, 0x2, 0x44D); mdelay(200);
+
+ if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+ rtl8225_write(dev, 0x02, 0x0c4d);
+ mdelay(200);
+ rtl8225_write(dev, 0x02, 0x044d);
+ mdelay(100);
+ if (!(rtl8225_read(dev, 6) & (1 << 7)))
+ printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+ wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ }
+
+ rtl8225_write(dev, 0x0, 0x127);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
+ rtl8225_write(dev, 0x1, i + 1);
+ rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
+ }
+
+ rtl8225_write(dev, 0x0, 0x027);
+ rtl8225_write(dev, 0x0, 0x22F);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+ rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+ mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+ mdelay(1);
+ }
+
+ mdelay(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x02, 0x42); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x11, 0x06); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x27); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x25, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+ rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+
+ rtl8225_write_phy_cck(dev, 0x00, 0x98); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x03, 0x20); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x04, 0x7e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x05, 0x12); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x06, 0xfc); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x07, 0x78); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x08, 0x2e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x11, 0x88); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x12, 0x47); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+ rtl8225_write_phy_cck(dev, 0x19, 0x00);
+ rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+ rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+ rtl8225_write_phy_cck(dev, 0x40, 0x86);
+ rtl8225_write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x42, 0x15); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x43, 0x18); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x44, 0x1f); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x45, 0x1e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x46, 0x1a); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x47, 0x15); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x48, 0x10); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x49, 0x0a); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4a, 0x05); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4b, 0x02); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4c, 0x05); mdelay(1);
+
+ rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D);
+
+ rtl8225_rf_set_tx_power(dev, 1);
+
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* B: 0x10 */
+
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
+ mdelay(1);
+ rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+
+ /* set sensitivity */
+ rtl8225_write(dev, 0x0c, 0x50);
+ rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+ rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+ rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
+}
+
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+ 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225z2_tx_power_cck[] = {
+ 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_ofdm[] = {
+ 0x42, 0x00, 0x40, 0x00, 0x40
+};
+
+static const u8 rtl8225z2_tx_gain_cck_ofdm[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+ 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+ 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+ 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+ 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23
+};
+
+static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 cck_power, ofdm_power;
+ const u8 *tmp;
+ u32 reg;
+ int i;
+
+ cck_power = priv->channels[channel - 1].val & 0xF;
+ ofdm_power = priv->channels[channel - 1].val >> 4;
+
+ cck_power = min(cck_power, (u8)15);
+ cck_power += priv->txpwr_base & 0xF;
+ cck_power = min(cck_power, (u8)35);
+
+ ofdm_power = min(ofdm_power, (u8)15);
+ ofdm_power += priv->txpwr_base >> 4;
+ ofdm_power = min(ofdm_power, (u8)35);
+
+ if (channel == 14)
+ tmp = rtl8225z2_tx_power_cck_ch14;
+ else
+ tmp = rtl8225z2_tx_power_cck;
+
+ for (i = 0; i < 8; i++)
+ rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+ rtl8225z2_tx_gain_cck_ofdm[cck_power]);
+ mdelay(1);
+
+ /* anaparam2 on */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl8225_write_phy_ofdm(dev, 2, 0x42);
+ rtl8225_write_phy_ofdm(dev, 5, 0x00);
+ rtl8225_write_phy_ofdm(dev, 6, 0x40);
+ rtl8225_write_phy_ofdm(dev, 7, 0x00);
+ rtl8225_write_phy_ofdm(dev, 8, 0x40);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+ rtl8225z2_tx_gain_cck_ofdm[ofdm_power]);
+ mdelay(1);
+}
+
+static const u16 rtl8225z2_rxgain[] = {
+ 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+ 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+ 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+ 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+ 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+ 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+ 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+ 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+ 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+ 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+ 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
+ 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+};
+
+static const u8 rtl8225z2_gain_bg[] = {
+ 0x23, 0x15, 0xa5, /* -82-1dBm */
+ 0x23, 0x15, 0xb5, /* -82-2dBm */
+ 0x23, 0x15, 0xc5, /* -82-3dBm */
+ 0x33, 0x15, 0xc5, /* -78dBm */
+ 0x43, 0x15, 0xc5, /* -74dBm */
+ 0x53, 0x15, 0xc5, /* -70dBm */
+ 0x63, 0x15, 0xc5 /* -66dBm */
+};
+
+void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ rtl8225_write(dev, 0x0, 0x2BF); mdelay(1);
+ rtl8225_write(dev, 0x1, 0xEE0); mdelay(1);
+ rtl8225_write(dev, 0x2, 0x44D); mdelay(1);
+ rtl8225_write(dev, 0x3, 0x441); mdelay(1);
+ rtl8225_write(dev, 0x4, 0x8C3); mdelay(1);
+ rtl8225_write(dev, 0x5, 0xC72); mdelay(1);
+ rtl8225_write(dev, 0x6, 0x0E6); mdelay(1);
+ rtl8225_write(dev, 0x7, 0x82A); mdelay(1);
+ rtl8225_write(dev, 0x8, 0x03F); mdelay(1);
+ rtl8225_write(dev, 0x9, 0x335); mdelay(1);
+ rtl8225_write(dev, 0xa, 0x9D4); mdelay(1);
+ rtl8225_write(dev, 0xb, 0x7BB); mdelay(1);
+ rtl8225_write(dev, 0xc, 0x850); mdelay(1);
+ rtl8225_write(dev, 0xd, 0xCDF); mdelay(1);
+ rtl8225_write(dev, 0xe, 0x02B); mdelay(1);
+ rtl8225_write(dev, 0xf, 0x114); mdelay(100);
+
+ rtl8225_write(dev, 0x0, 0x1B7);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+ rtl8225_write(dev, 0x1, i + 1);
+ rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+ }
+
+ rtl8225_write(dev, 0x3, 0x080);
+ rtl8225_write(dev, 0x5, 0x004);
+ rtl8225_write(dev, 0x0, 0x0B7);
+ rtl8225_write(dev, 0x2, 0xc4D);
+
+ mdelay(200);
+ rtl8225_write(dev, 0x2, 0x44D);
+ mdelay(100);
+
+ if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+ rtl8225_write(dev, 0x02, 0x0C4D);
+ mdelay(200);
+ rtl8225_write(dev, 0x02, 0x044D);
+ mdelay(100);
+ if (!(rtl8225_read(dev, 6) & (1 << 7)))
+ printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+ wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ }
+
+ mdelay(200);
+
+ rtl8225_write(dev, 0x0, 0x2BF);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+ rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+ mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+ mdelay(1);
+ }
+
+ mdelay(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x02, 0x42); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0a, 0x08); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+ rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x11, 0x07); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1b, 0x15); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x17); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x23, 0x80); mdelay(1); //FIXME: not needed?
+ rtl8225_write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x25, 0x00); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
+ rtl8225_write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
+
+ rtl8225_write_phy_cck(dev, 0x00, 0x98); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x03, 0x20); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x04, 0x7e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x05, 0x12); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x06, 0xfc); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x07, 0x78); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x08, 0x2e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x11, 0x88); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x12, 0x47); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+ rtl8225_write_phy_cck(dev, 0x19, 0x00);
+ rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+ rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+ rtl8225_write_phy_cck(dev, 0x40, 0x86);
+ rtl8225_write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x42, 0x15); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x43, 0x18); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x44, 0x36); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x45, 0x35); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x46, 0x2e); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x47, 0x25); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x48, 0x1c); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x49, 0x12); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4a, 0x09); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4b, 0x04); mdelay(1);
+ rtl8225_write_phy_cck(dev, 0x4c, 0x05); mdelay(1);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); mdelay(1);
+
+ rtl8225z2_rf_set_tx_power(dev, 1);
+
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* B: 0x10 */
+
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
+ mdelay(1);
+ rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+}
+
+void rtl8225_rf_stop(struct ieee80211_hw *dev)
+{
+ u8 reg;
+ struct rtl8187_priv *priv = dev->priv;
+
+ rtl8225_write(dev, 0x4, 0x1f); mdelay(1);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8225_rf_set_channel(struct ieee80211_hw *dev, int channel)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ if (priv->rf_init == rtl8225_rf_init)
+ rtl8225_rf_set_tx_power(dev, channel);
+ else
+ rtl8225z2_rf_set_tx_power(dev, channel);
+
+ rtl8225_write(dev, 0x7, rtl8225_chan[channel - 1]);
+ mdelay(10);
+}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.h b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.h
new file mode 100644
index 0000000..ed28118
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.h
@@ -0,0 +1,30 @@
+#ifndef RTL8187_RTL8225_H
+#define RTL8187_RTL8225_H
+
+#define RTL8225_ANAPARAM_ON 0xa0000a59
+#define RTL8225_ANAPARAM2_ON 0x860c7312
+#define RTL8225_ANAPARAM_OFF 0xa00beb59
+#define RTL8225_ANAPARAM2_OFF 0x840dec11
+
+void rtl8225_write(struct ieee80211_hw *, u8 addr, u16 data);
+u16 rtl8225_read(struct ieee80211_hw *, u8 addr);
+
+void rtl8225_rf_init(struct ieee80211_hw *);
+void rtl8225z2_rf_init(struct ieee80211_hw *);
+void rtl8225_rf_stop(struct ieee80211_hw *);
+void rtl8225_rf_set_channel(struct ieee80211_hw *, int);
+
+
+static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
+ u8 addr, u32 data)
+{
+ rtl8187_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
+ u8 addr, u32 data)
+{
+ rtl8187_write_phy(dev, addr, data | 0x10000);
+}
+
+#endif /* RTL8187_RTL8225_H */
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
new file mode 100644
index 0000000..e4ee946
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -0,0 +1,212 @@
+#ifndef RTL818X_H
+#define RTL818X_H
+
+struct rtl818x_csr {
+ u8 MAC[6];
+ u8 reserved_0[2];
+ __le32 MAR[2];
+ u8 RX_FIFO_COUNT;
+ u8 reserved_1;
+ u8 TX_FIFO_COUNT;
+ u8 BQREQ;
+ u8 reserved_2[4];
+ __le32 TSFT[2];
+ __le32 TLPDA;
+ __le32 TNPDA;
+ __le32 THPDA;
+ __le16 BRSR;
+ u8 BSSID[6];
+ u8 RESP_RATE;
+ u8 EIFS;
+ u8 reserved_3[1];
+ u8 CMD;
+#define RTL818X_CMD_TX_ENABLE (1 << 2)
+#define RTL818X_CMD_RX_ENABLE (1 << 3)
+#define RTL818X_CMD_RESET (1 << 4)
+ u8 reserved_4[4];
+ __le16 INT_MASK;
+ __le16 INT_STATUS;
+#define RTL818X_INT_RX_OK (1 << 0)
+#define RTL818X_INT_RX_ERR (1 << 1)
+#define RTL818X_INT_TXL_OK (1 << 2)
+#define RTL818X_INT_TXL_ERR (1 << 3)
+#define RTL818X_INT_RX_DU (1 << 4)
+#define RTL818X_INT_RX_FO (1 << 5)
+#define RTL818X_INT_TXN_OK (1 << 6)
+#define RTL818X_INT_TXN_ERR (1 << 7)
+#define RTL818X_INT_TXH_OK (1 << 8)
+#define RTL818X_INT_TXH_ERR (1 << 9)
+#define RTL818X_INT_TXB_OK (1 << 10)
+#define RTL818X_INT_TXB_ERR (1 << 11)
+#define RTL818X_INT_ATIM (1 << 12)
+#define RTL818X_INT_BEACON (1 << 13)
+#define RTL818X_INT_TIME_OUT (1 << 14)
+#define RTL818X_INT_TX_FO (1 << 15)
+ __le32 TX_CONF;
+#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17)
+#define RTL818X_TX_CONF_NO_ICV (1 << 19)
+#define RTL818X_TX_CONF_DISCW (1 << 20)
+#define RTL818X_TX_CONF_R8180_ABCD (2 << 25)
+#define RTL818X_TX_CONF_R8180_F (3 << 25)
+#define RTL818X_TX_CONF_R8185_ABC (4 << 25)
+#define RTL818X_TX_CONF_R8185_D (5 << 25)
+#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
+#define RTL818X_TX_CONF_CW_MIN (1 << 31)
+ __le32 RX_CONF;
+#define RTL818X_RX_CONF_MONITOR (1 << 0)
+#define RTL818X_RX_CONF_NICMAC (1 << 1)
+#define RTL818X_RX_CONF_MULTICAST (1 << 2)
+#define RTL818X_RX_CONF_BROADCAST (1 << 3)
+#define RTL818X_RX_CONF_DATA (1 << 18)
+#define RTL818X_RX_CONF_CTRL (1 << 19)
+#define RTL818X_RX_CONF_MGMT (1 << 20)
+#define RTL818X_RX_CONF_BSSID (1 << 23)
+#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
+#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31)
+ __le32 INT_TIMEOUT;
+ __le32 TBDA;
+ u8 EEPROM_CMD;
+#define RTL818X_EEPROM_CMD_READ (1 << 0)
+#define RTL818X_EEPROM_CMD_WRITE (1 << 1)
+#define RTL818X_EEPROM_CMD_CK (1 << 2)
+#define RTL818X_EEPROM_CMD_CS (1 << 3)
+#define RTL818X_EEPROM_CMD_NORMAL (0 << 6)
+#define RTL818X_EEPROM_CMD_LOAD (1 << 6)
+#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6)
+#define RTL818X_EEPROM_CMD_CONFIG (3 << 6)
+ u8 CONFIG0;
+ u8 CONFIG1;
+ u8 CONFIG2;
+ __le32 ANAPARAM;
+ u8 MSR;
+#define RTL818X_MSR_NO_LINK (0 << 2)
+#define RTL818X_MSR_ADHOC (1 << 2)
+#define RTL818X_MSR_INFRA (2 << 2)
+ u8 CONFIG3;
+#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
+ u8 CONFIG4;
+#define RTL818X_CONFIG4_POWEROFF (1 << 6)
+#define RTL818X_CONFIG4_VCOOFF (1 << 7)
+ u8 TESTR;
+ u8 reserved_9[2];
+ __le16 PGSELECT;
+ __le32 ANAPARAM2;
+ u8 reserved_10[12];
+ __le16 BEACON_INTERVAL;
+ __le16 ATIM_WND;
+ __le16 BEACON_INTERVAL_TIME;
+ __le16 ATIMTR_INTERVAL;
+ u8 reserved_11[4];
+ u8 PHY[4];
+ __le16 RFPinsOutput;
+ __le16 RFPinsEnable;
+ __le16 RFPinsSelect;
+ __le16 RFPinsInput;
+ __le32 RF_PARA;
+ __le32 RF_TIMING;
+ u8 GP_ENABLE;
+ u8 GPIO;
+ u8 reserved_12[10];
+ u8 TX_AGC_CTL;
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
+ u8 TX_GAIN_CCK;
+ u8 TX_GAIN_OFDM;
+ u8 TX_ANTENNA;
+ u8 reserved_13[16];
+ u8 WPA_CONF;
+ u8 reserved_14[3];
+ u8 SIFS;
+ u8 DIFS;
+ u8 SLOT;
+ u8 reserved_15[5];
+ u8 CW_CONF;
+#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
+ u8 CW_VAL;
+ u8 RATE_FALLBACK;
+ u8 reserved_16[25];
+ u8 CONFIG5;
+ u8 TX_DMA_POLLING;
+ u8 reserved_17[2];
+ __le16 CWR;
+ u8 RETRY_CTR;
+ u8 reserved_18[5];
+ __le32 RDSAR;
+ u8 reserved_19[18];
+ u16 TALLY_CNT;
+ u8 TALLY_SEL;
+} __attribute__((packed));
+
+static const struct ieee80211_rate rtl818x_rates[] = {
+ { .rate = 10,
+ .val = 0,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 20,
+ .val = 1,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 55,
+ .val = 2,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 110,
+ .val = 3,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 60,
+ .val = 4,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 90,
+ .val = 5,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 120,
+ .val = 6,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 180,
+ .val = 7,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 240,
+ .val = 8,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 360,
+ .val = 9,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 480,
+ .val = 10,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 540,
+ .val = 11,
+ .flags = IEEE80211_RATE_OFDM },
+};
+
+static const struct ieee80211_channel rtl818x_channels[] = {
+ { .chan = 1,
+ .freq = 2412},
+ { .chan = 2,
+ .freq = 2417},
+ { .chan = 3,
+ .freq = 2422},
+ { .chan = 4,
+ .freq = 2427},
+ { .chan = 5,
+ .freq = 2432},
+ { .chan = 6,
+ .freq = 2437},
+ { .chan = 7,
+ .freq = 2442},
+ { .chan = 8,
+ .freq = 2447},
+ { .chan = 9,
+ .freq = 2452},
+ { .chan = 10,
+ .freq = 2457},
+ { .chan = 11,
+ .freq = 2462},
+ { .chan = 12,
+ .freq = 2467},
+ { .chan = 13,
+ .freq = 2472},
+ { .chan = 14,
+ .freq = 2484}
+};
+
+#endif /* RTL818X_H */
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index e04cffc..8459549 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -40,6 +40,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0df6, 0x9075), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x079b, 0x004a), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x1740, 0x2000), .driver_info = DEVICE_ZD1211 },
@@ -67,8 +68,11 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x0586, 0x3410), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0baf, 0x0121), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0586, 0x3412), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x3413), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
+ { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
{}
};
diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h
new file mode 100644
index 0000000..4b9be59
--- /dev/null
+++ b/include/linux/eeprom_93cx6.h
@@ -0,0 +1,77 @@
+/*
+ Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: eeprom_93cx6
+ Abstract: EEPROM reader datastructures for 93cx6 chipsets.
+ Supported chipsets: 93c46 & 93c66.
+ */
+
+/*
+ * EEPROM operation defines.
+ */
+#define PCI_EEPROM_WIDTH_93C46 6
+#define PCI_EEPROM_WIDTH_93C66 8
+#define PCI_EEPROM_WIDTH_OPCODE 3
+#define PCI_EEPROM_WRITE_OPCODE 0x05
+#define PCI_EEPROM_READ_OPCODE 0x06
+#define PCI_EEPROM_EWDS_OPCODE 0x10
+#define PCI_EEPROM_EWEN_OPCODE 0x13
+
+/**
+ * struct eeprom_93cx6 - control structure for setting the commands
+ * for reading the eeprom data.
+ * @data: private pointer for the driver.
+ * @register_read(struct eeprom_93cx6 *eeprom): handler to
+ * read the eeprom register, this function should set all reg_* fields.
+ * @register_write(struct eeprom_93cx6 *eeprom): handler to
+ * write to the eeprom register by using all reg_* fields.
+ * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
+ * @reg_data_in: register field to indicate data input
+ * @reg_data_out: register field to indicate data output
+ * @reg_data_clock: register field to set the data clock
+ * @reg_chip_select: register field to set the chip select
+ *
+ * This structure is used for the communication between the driver
+ * and the eeprom_93cx6 handlers for reading the eeprom.
+ */
+struct eeprom_93cx6 {
+ void *data;
+
+ void (*register_read)(struct eeprom_93cx6 *eeprom);
+ void (*register_write)(struct eeprom_93cx6 *eeprom);
+
+ int width;
+
+ char reg_data_in;
+ char reg_data_out;
+ char reg_data_clock;
+ char reg_chip_select;
+};
+
+extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom,
+ const u8 word, u16 *data);
+extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
+ const u8 word, __le16 *data, const u16 words);
+
+extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom,
+ const u8 word, u16 data);
+extern void eeprom_93cx6_multiwrite(struct eeprom_93cx6 *eeprom,
+ const u8 word, __le16 *data, const u16 words);
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index d56b292..bbd85cd 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -1291,6 +1291,8 @@ extern u8 ieee80211_get_channel_flags(struct ieee80211_device *ieee,
extern const struct ieee80211_channel *ieee80211_get_channel(struct
ieee80211_device
*ieee, u8 channel);
+extern u32 ieee80211_channel_to_freq(struct ieee80211_device * ieee,
+ u8 channel);
/* ieee80211_wx.c */
extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
diff --git a/net/ieee80211/ieee80211_geo.c b/net/ieee80211/ieee80211_geo.c
index 305a09d..960ad13 100644
--- a/net/ieee80211/ieee80211_geo.c
+++ b/net/ieee80211/ieee80211_geo.c
@@ -94,6 +94,21 @@ int ieee80211_channel_to_index(struct ieee80211_device *ieee, u8 channel)
return -1;
}
+u32 ieee80211_channel_to_freq(struct ieee80211_device * ieee, u8 channel)
+{
+ const struct ieee80211_channel * ch;
+
+ /* Driver needs to initialize the geography map before using
+ * these helper functions */
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return 0;
+
+ ch = ieee80211_get_channel(ieee, channel);
+ if (!ch->channel)
+ return 0;
+ return ch->freq;
+}
+
u8 ieee80211_freq_to_channel(struct ieee80211_device * ieee, u32 freq)
{
int i;
@@ -174,6 +189,7 @@ EXPORT_SYMBOL(ieee80211_get_channel);
EXPORT_SYMBOL(ieee80211_get_channel_flags);
EXPORT_SYMBOL(ieee80211_is_valid_channel);
EXPORT_SYMBOL(ieee80211_freq_to_channel);
+EXPORT_SYMBOL(ieee80211_channel_to_freq);
EXPORT_SYMBOL(ieee80211_channel_to_index);
EXPORT_SYMBOL(ieee80211_set_geo);
EXPORT_SYMBOL(ieee80211_get_geo);
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
index cee5e13..523a137 100644
--- a/net/ieee80211/ieee80211_wx.c
+++ b/net/ieee80211/ieee80211_wx.c
@@ -89,15 +89,17 @@ static char *ieee80211_translate_scan(struct ieee80211_device *ieee,
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN);
}
- /* Add frequency/channel */
+ /* Add channel and frequency */
iwe.cmd = SIOCGIWFREQ;
-/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
- iwe.u.freq.e = 3; */
iwe.u.freq.m = network->channel;
iwe.u.freq.e = 0;
iwe.u.freq.i = 0;
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
+ iwe.u.freq.m = ieee80211_channel_to_freq(ieee, network->channel);
+ iwe.u.freq.e = 6;
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
+
/* Add encryption capability */
iwe.cmd = SIOCGIWENCODE;
if (network->capability & WLAN_CAPABILITY_PRIVACY)
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 822917d..3e07e9d 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -17,6 +17,7 @@
* scan result table filtering (by capability (privacy, IBSS/BSS, WPA/RSN IE,
* SSID)
*/
+#include <linux/delay.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
@@ -27,7 +28,6 @@
#include <linux/rtnetlink.h>
#include <net/iw_handler.h>
#include <asm/types.h>
-#include <asm/delay.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
--
John W. Linville
linville@tuxdriver.com
next reply other threads:[~2007-05-07 18:03 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-07 17:51 John W. Linville [this message]
2007-05-07 21:15 ` Please pull 'upstream' branch of wireless-2.6 Dan Williams
2007-05-07 21:15 ` Dan Williams
2007-05-07 22:51 ` John W. Linville
2007-05-07 22:51 ` John W. Linville
2007-05-08 8:49 ` Johannes Berg
2007-05-08 8:49 ` Johannes Berg
2007-05-07 23:09 ` Jeff Garzik
2007-05-07 23:09 ` Jeff Garzik
2007-05-07 23:30 ` Michael Wu
2007-05-07 23:30 ` Michael Wu
2007-05-07 23:38 ` John W. Linville
2007-05-08 17:38 ` John W. Linville
2007-05-08 17:38 ` John W. Linville
-- strict thread matches above, loose matches on Subject: below --
2007-05-29 18:30 Please pull 'upstream-fixes' " John W. Linville
2007-05-29 18:31 ` Please pull 'upstream' " John W. Linville
2007-05-30 14:03 ` Jeff Garzik
2007-05-08 17:39 John W. Linville
2007-05-09 22:54 ` Jeff Garzik
2007-03-27 18:26 Please pull 'upstream-fixes' " John W. Linville
2007-03-27 18:26 ` Please pull 'upstream' " John W. Linville
2007-03-29 12:31 ` Jeff Garzik
2007-03-16 21:31 Please pull 'upstream-fixes' " John W. Linville
2007-03-16 21:34 ` Please pull 'upstream' " John W. Linville
2007-03-23 5:55 ` Jeff Garzik
2007-03-23 12:02 ` Dan Williams
2007-03-08 3:30 Please pull 'upstream-fixes' " John W. Linville
2007-03-08 3:32 ` Please pull 'upstream' " John W. Linville
2007-03-09 16:59 ` Jeff Garzik
2007-02-27 20:50 Please pull 'upstream-fixes' " John W. Linville
2007-02-27 20:51 ` Please pull 'upstream' " John W. Linville
2007-03-03 0:42 ` Jeff Garzik
2007-02-02 21:27 Please pull "upstream-fixes" " John W. Linville
2007-02-02 21:28 ` Please pull "upstream" " John W. Linville
2007-02-07 0:06 ` Please pull "upstream-fixes" " Jeff Garzik
2007-02-07 21:11 ` Please pull "upstream" " John W. Linville
2007-02-07 21:11 ` John W. Linville
2007-02-09 20:13 ` John W. Linville
2007-02-09 20:13 ` John W. Linville
2007-02-09 21:12 ` Jeff Garzik
2007-02-09 21:12 ` Jeff Garzik
2007-01-18 15:48 Please pull 'upstream-fixes' " John W. Linville
2007-01-18 15:49 ` Please pull 'upstream' " John W. Linville
2007-01-19 3:10 ` Jeff Garzik
2007-01-19 8:42 ` John W. Linville
2007-01-23 5:36 ` Jeff Garzik
2007-01-03 2:41 Please pull 'upstream-fixes' " John W. Linville
2007-01-03 2:42 ` Please pull 'upstream' " John W. Linville
2007-01-18 12:16 ` John W. Linville
2006-12-21 3:03 Please pull 'upstream-fixes' " John W. Linville
2006-12-21 3:05 ` Please pull 'upstream' " John W. Linville
2006-12-26 21:39 ` Jeff Garzik
2006-12-28 0:10 ` John W. Linville
2007-01-03 2:04 ` John W. Linville
2006-12-12 0:21 John W. Linville
2006-12-06 1:42 John W. Linville
2006-12-07 10:03 ` Jeff Garzik
2006-11-15 1:29 Please pull 'upstream-fixes' " John W. Linville
2006-11-15 1:31 ` Please pull 'upstream' " John W. Linville
2006-11-28 19:13 ` John W. Linville
2006-11-08 4:58 Please pull 'upstream-fixes' " John W. Linville
2006-11-08 4:59 ` Please pull 'upstream' " John W. Linville
2006-11-08 19:48 ` John W. Linville
2006-11-14 15:29 ` Jeff Garzik
2006-10-17 21:34 Please pull 'upstream-fixes' " John W. Linville
2006-10-17 21:35 ` Please pull 'upstream' " John W. Linville
2006-10-21 18:22 ` Jeff Garzik
2006-09-11 23:58 Please pull 'upstream-fixes' " John W. Linville
2006-09-11 23:59 ` Please pull 'upstream' " John W. Linville
2006-09-12 15:43 ` Jeff Garzik
2006-09-12 19:49 ` Michael Buesch
2006-08-30 15:05 John W. Linville
2006-09-06 15:02 ` Jeff Garzik
2006-08-14 20:50 John W. Linville
2006-07-28 0:22 Please pull 'upstream-fixes' " John W. Linville
2006-07-28 0:23 ` Please pull 'upstream' " John W. Linville
2006-07-29 4:33 ` Jeff Garzik
2006-07-10 21:29 Please pull 'upstream-fixes' " John W. Linville
2006-07-10 21:31 ` Please pull 'upstream' " John W. Linville
2006-07-10 21:38 ` Michael Buesch
2006-07-10 21:58 ` Larry Finger
2006-07-19 17:51 ` Jeff Garzik
2006-06-26 21:25 John W. Linville
2006-06-27 2:06 ` Jeff Garzik
2006-06-27 2:27 ` Larry Finger
2006-06-27 3:50 ` Jeff Garzik
2006-06-27 13:30 ` Michael Buesch
2006-06-27 14:11 ` Jeff Garzik
2006-06-27 14:34 ` Larry Finger
2006-06-27 14:36 ` Michael Buesch
2006-06-27 16:10 ` Jeff Garzik
2006-06-27 16:23 ` Michael Buesch
2006-06-27 15:25 ` Michael Buesch
2006-06-27 16:12 ` Jeff Garzik
2006-06-27 16:31 ` Michael Buesch
2006-06-27 19:33 ` John W. Linville
2006-06-27 19:47 ` Michael Buesch
2006-06-27 20:06 ` Larry Finger
2006-06-27 20:23 ` Michael Buesch
2006-06-27 20:37 ` Larry Finger
2006-06-28 14:34 ` Michael Buesch
2006-06-28 16:04 ` Larry Finger
2006-06-28 16:32 ` Michael Buesch
2006-06-28 17:32 ` Larry Finger
2006-06-28 18:02 ` Michael Buesch
2006-06-27 16:52 ` Joseph Jezak
2006-06-15 20:03 John W. Linville
2006-06-20 8:46 ` Jeff Garzik
2006-06-05 21:53 Please pull 'upstream-fixes' " John W. Linville
2006-06-05 21:55 ` Please pull 'upstream' " John W. Linville
2006-06-08 19:48 ` Jeff Garzik
2006-05-22 19:18 Please pull 'upstream-fixes' " John W. Linville
2006-05-22 19:19 ` Please pull 'upstream' " John W. Linville
2006-05-24 4:35 ` Jeff Garzik
2006-05-24 12:42 ` John W. Linville
2006-05-17 19:34 Please pull 'upstream-fixes' " John W. Linville
2006-05-17 19:38 ` Please pull 'upstream' " John W. Linville
2006-05-17 21:23 ` Daniel Drake
2006-05-18 17:28 ` John W. Linville
2006-05-18 18:26 ` Daniel Drake
2006-05-06 1:06 Please pull upstream-fixes " John W. Linville
2006-05-06 1:09 ` Please pull upstream " John W. Linville
2006-04-24 19:40 Please pull 'upstream-fixes' " John W. Linville
2006-04-24 20:40 ` Please pull 'upstream' " John W. Linville
2006-04-25 0:33 ` Dan Williams
2006-04-25 11:30 ` Johannes Berg
2006-04-25 12:03 ` Dan Williams
2006-04-26 10:18 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070507175121.GF5125@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=jeff@garzik.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.