From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: [git patches] libata fixes Date: Sat, 9 Jun 2007 23:31:59 -0400 Message-ID: <20070610033159.GA29752@havoc.gtf.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from havoc.gtf.org ([69.61.125.42]:33344 "EHLO havoc.gtf.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758603AbXFJDcA (ORCPT ); Sat, 9 Jun 2007 23:32:00 -0400 Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Andrew Morton , Linus Torvalds Cc: linux-ide@vger.kernel.org, LKML As mentioned, will push Tejun's updated probe patch when received. Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus to receive the following updates: drivers/ata/ahci.c | 24 ++++++++++++++++ drivers/ata/libata-core.c | 29 +++++++++++++------- drivers/ata/libata-scsi.c | 67 +++++++++++++++++++++++++++++---------------- drivers/ata/libata-sff.c | 37 +++++++++++++++++++----- drivers/ata/pata_isapnp.c | 1 - include/linux/ata.h | 3 +- include/linux/libata.h | 1 + 7 files changed, 118 insertions(+), 44 deletions(-) Alan Cox (2): libata-core/sff: Fix multiple assumptions about DMA libata: Correct abuse of language Albert Lee (6): libata: print device model and firmware revision for ATAPI devices libata passthru: update protocol numbers libata passthru: support PIO multi commands libata passthru: map UDMA protocols libata passthru: always enforce correct DEV bit libata passthru: update cached device paramters Olof Johansson (1): libata: fix probe time irq printouts Peer Chen (1): ahci: Add MCP73/MCP77 support to AHCI driver Tejun Heo (2): libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP libata: fix hw_sata_spd_limit initialization Yoichi Yuasa (1): remove unused variable in pata_isapnp diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7baeaff..545f330 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -426,6 +426,30 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4733f00..4b3c45e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1727,7 +1727,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, /* sanity check */ rc = -EINVAL; - reason = "device reports illegal type"; + reason = "device reports invalid type"; if (class == ATA_DEV_ATA) { if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) @@ -1900,6 +1900,13 @@ int ata_dev_configure(struct ata_device *dev) if (ata_msg_probe(ap)) ata_dump_id(id); + /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ + ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, + sizeof(fwrevbuf)); + + ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD, + sizeof(modelbuf)); + /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { if (ata_id_is_cfa(id)) { @@ -1914,13 +1921,6 @@ int ata_dev_configure(struct ata_device *dev) dev->n_sectors = ata_id_n_sectors(id); - /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ - ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, - sizeof(fwrevbuf)); - - ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD, - sizeof(modelbuf)); - if (dev->id[59] & 0x100) dev->multi_count = dev->id[59] & 0xff; @@ -2009,7 +2009,9 @@ int ata_dev_configure(struct ata_device *dev) /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) - ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", + ata_dev_printk(dev, KERN_INFO, + "ATAPI: %s, %s, max %s%s\n", + modelbuf, fwrevbuf, ata_mode_string(xfer_mask), cdb_intr_string); } @@ -3791,6 +3793,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, }, { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, }, + /* Drives which do spurious command completion */ + { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, }, /* Devices with NCQ limits */ @@ -6313,7 +6317,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* init sata_spd_limit to the current value */ if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { int spd = (scontrol >> 4) & 0xf; - ap->hw_sata_spd_limit &= (1 << spd) - 1; + if (spd) + ap->hw_sata_spd_limit &= (1 << spd) - 1; } ap->sata_spd_limit = ap->hw_sata_spd_limit; @@ -6433,6 +6438,9 @@ int ata_host_activate(struct ata_host *host, int irq, if (rc) devm_free_irq(host->dev, irq, host); + /* Used to print device info at probe */ + host->irq = irq; + return rc; } @@ -6818,6 +6826,7 @@ EXPORT_SYMBOL_GPL(ata_check_status); EXPORT_SYMBOL_GPL(ata_altstatus); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); +EXPORT_SYMBOL_GPL(ata_sff_port_start); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_do_set_mode); EXPORT_SYMBOL_GPL(ata_data_xfer); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b3900cf..c228df2 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1363,12 +1363,22 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE * cache */ - if (ap->ops->error_handler && - !need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && - ((qc->tf.feature == SETFEATURES_WC_ON) || - (qc->tf.feature == SETFEATURES_WC_OFF))) { - ap->eh_info.action |= ATA_EH_REVALIDATE; - ata_port_schedule_eh(ap); + if (ap->ops->error_handler && !need_sense) { + switch (qc->tf.command) { + case ATA_CMD_SET_FEATURES: + if ((qc->tf.feature == SETFEATURES_WC_ON) || + (qc->tf.feature == SETFEATURES_WC_OFF)) { + ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(ap); + } + break; + + case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */ + case ATA_CMD_SET_MULTI: /* multi_count changed */ + ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(ap); + break; + } } /* For ATA pass thru (SAT) commands, generate a sense block if @@ -2506,22 +2516,21 @@ ata_scsi_map_proto(u8 byte1) return ATA_PROT_NODATA; case 6: /* DMA */ + case 10: /* UDMA Data-in */ + case 11: /* UDMA Data-Out */ return ATA_PROT_DMA; case 4: /* PIO Data-in */ case 5: /* PIO Data-out */ return ATA_PROT_PIO; - case 10: /* Device Reset */ case 0: /* Hard Reset */ case 1: /* SRST */ - case 2: /* Bus Idle */ - case 7: /* Packet */ - case 8: /* DMA Queued */ - case 9: /* Device Diagnostic */ - case 11: /* UDMA Data-in */ - case 12: /* UDMA Data-Out */ - case 13: /* FPDMA */ + case 8: /* Device Diagnostic */ + case 9: /* Device Reset */ + case 7: /* DMA Queued */ + case 12: /* FPDMA */ + case 15: /* Return Response Info */ default: /* Reserved */ break; } @@ -2552,10 +2561,6 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) goto invalid_fld; - if (cdb[1] & 0xe0) - /* PIO multi not supported yet */ - goto invalid_fld; - /* * 12 and 16 byte CDBs use different offsets to * provide the various register values. @@ -2600,12 +2605,26 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) tf->device = cdb[8]; tf->command = cdb[9]; } - /* - * If slave is possible, enforce correct master/slave bit - */ - if (qc->ap->flags & ATA_FLAG_SLAVE_POSS) - tf->device = qc->dev->devno ? - tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; + + /* enforce correct master/slave bit */ + tf->device = dev->devno ? + tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; + + /* sanity check for pio multi commands */ + if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) + goto invalid_fld; + + if (is_multi_taskfile(tf)) { + unsigned int multi_count = 1 << (cdb[1] >> 5); + + /* compare the passed through multi_count + * with the cached multi_count of libata + */ + if (multi_count != dev->multi_count) + ata_dev_printk(dev, KERN_WARNING, + "invalid multi_count %u ignored\n", + multi_count); + } /* READ/WRITE LONG use a non-standard sect_size */ qc->sect_size = ATA_SECT_SIZE; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e35d134..ce84805 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -80,25 +80,25 @@ u8 ata_dummy_irq_on (struct ata_port *ap) { return 0; } u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) { unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; - u8 host_stat, post_stat, status; + u8 host_stat = 0, post_stat = 0, status; status = ata_busy_wait(ap, bits, 1000); if (status & bits) if (ata_msg_err(ap)) printk(KERN_ERR "abnormal status 0x%X\n", status); - /* get controller status; clear intr, err bits */ - host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, - ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - - post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + if (ap->ioaddr.bmdma_addr) { + /* get controller status; clear intr, err bits */ + host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, + ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + } if (ata_msg_intr(ap)) printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", __FUNCTION__, host_stat, post_stat, status); - return status; } @@ -516,6 +516,27 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) ata_bmdma_stop(qc); } +/** + * ata_sff_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table if the device + * is DMA capable SFF. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +int ata_sff_port_start(struct ata_port *ap) +{ + if (ap->ioaddr.bmdma_addr) + return ata_port_start(ap); + return 0; +} + #ifdef CONFIG_PCI static int ata_resources_present(struct pci_dev *pdev, int port) diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 1f647b6..5525518 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -77,7 +77,6 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; - int rc; if (pnp_port_valid(idev, 0) == 0) return -ENODEV; diff --git a/include/linux/ata.h b/include/linux/ata.h index edb31bf..703febb 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -151,6 +151,7 @@ enum { ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE, ATA_CMD_SET_FEATURES = 0xEF, + ATA_CMD_SET_MULTI = 0xC6, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, @@ -249,7 +250,7 @@ enum ata_tf_protocols { /* ATA taskfile protocols */ ATA_PROT_UNKNOWN, /* unknown/invalid */ ATA_PROT_NODATA, /* no data */ - ATA_PROT_PIO, /* PIO single sector */ + ATA_PROT_PIO, /* PIO data xfer */ ATA_PROT_DMA, /* DMA */ ATA_PROT_NCQ, /* NCQ */ ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ diff --git a/include/linux/libata.h b/include/linux/libata.h index a6a3113..745c4f9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -753,6 +753,7 @@ extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); +extern int ata_sff_port_start (struct ata_port *ap); extern irqreturn_t ata_interrupt (int irq, void *dev_instance); extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data);