From: ulf at uclibc.org <ulf@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] svn commit: trunk/buildroot/toolchain/uClibc
Date: Tue, 14 Aug 2007 00:07:15 -0700 (PDT) [thread overview]
Message-ID: <20070814070715.460EDA682F@busybox.net> (raw)
Author: ulf
Date: 2007-08-14 00:07:13 -0700 (Tue, 14 Aug 2007)
New Revision: 19500
Log:
Fix continous remake's of uClibc, Save .config to .oldconfig before 'conf', cleanup ARM config to avoid stop during build
Modified:
trunk/buildroot/toolchain/uClibc/uclibc.mk
Changeset:
Modified: trunk/buildroot/toolchain/uClibc/uclibc.mk
===================================================================
--- trunk/buildroot/toolchain/uClibc/uclibc.mk 2007-08-14 06:28:01 UTC (rev 19499)
+++ trunk/buildroot/toolchain/uClibc/uclibc.mk 2007-08-14 07:07:13 UTC (rev 19500)
@@ -86,6 +86,9 @@
UCLIBC_NOT_TARGET_ENDIAN:=LITTLE
endif
+ARM_CONFIG:=CONFIG_$(strip $(subst ",, $(BR2_ARM_TYPE)))
+#"))
+
$(DL_DIR)/$(UCLIBC_SOURCE):
$(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE)
@@ -117,8 +120,8 @@
touch $@
# Some targets may wish to provide their own UCLIBC_CONFIG_FILE...
-$(UCLIBC_DIR)/.config: $(UCLIBC_DIR)/.unpacked $(UCLIBC_CONFIG_FILE)
- cp -f $(UCLIBC_CONFIG_FILE) $(UCLIBC_DIR)/.config
+$(UCLIBC_DIR)/.oldconfig: $(UCLIBC_DIR)/.unpacked $(UCLIBC_CONFIG_FILE)
+ cp -f $(UCLIBC_CONFIG_FILE) $(UCLIBC_DIR)/.oldconfig
$(SED) 's,^CROSS_COMPILER_PREFIX=.*,CROSS_COMPILER_PREFIX="$(TARGET_CROSS)",g' \
-e 's,# TARGET_$(UCLIBC_TARGET_ARCH) is not set,TARGET_$(UCLIBC_TARGET_ARCH)=y,g' \
-e 's,^TARGET_ARCH="none",TARGET_ARCH=\"$(UCLIBC_TARGET_ARCH)\",g' \
@@ -127,143 +130,139 @@
-e 's,^RUNTIME_PREFIX=.*,RUNTIME_PREFIX=\"/\",g' \
-e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"/usr/\",g' \
-e 's,^SHARED_LIB_LOADER_PREFIX=.*,SHARED_LIB_LOADER_PREFIX=\"/lib\",g' \
- $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
ifeq ($(UCLIBC_TARGET_ARCH),arm)
$(SED) 's/^\(CONFIG_[^_]*[_]*ARM[^=]*\)=.*/# \1 is not set/g' \
- $(UCLIBC_DIR)/.config
- /bin/echo "CONFIG_$(BR2_ARM_TYPE)=y" >> \
- $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
+ $(SED) 's/^.*$(ARM_CONFIG).*/$(ARM_CONFIG)=y/g' $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_ARM_EABI),y)
- /bin/echo "# CONFIG_ARM_OABI is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "CONFIG_ARM_EABI=y" >> $(UCLIBC_DIR)/.config
+ /bin/echo "# CONFIG_ARM_OABI is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "CONFIG_ARM_EABI=y" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_ARM_OABI),y)
- /bin/echo "CONFIG_ARM_OABI=y" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_ARM_EABI is not set" >> $(UCLIBC_DIR)/.config
+ /bin/echo "CONFIG_ARM_OABI=y" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_ARM_EABI is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
-ifeq ($(BR2_generic_arm),y)
- $(SED) 's,^.*CONFIG_GENERIC_ARM.*,CONFIG_GENERIC_ARM=y,g' $(UCLIBC_DIR)/.config
-else
- $(SED) 's,^.*CONFIG_GENERIC_ARM.*,# CONFIG_GENERIC_ARM is not set,g' $(UCLIBC_DIR)/.config
endif
-endif
ifneq ($(UCLIBC_TARGET_ENDIAN),)
# The above doesn't work for me, so redo
$(SED) 's/.*\(ARCH_$(UCLIBC_NOT_TARGET_ENDIAN)_ENDIAN\).*/# \1 is not set/g' \
-e 's/.*\(ARCH_WANTS_$(UCLIBC_NOT_TARGET_ENDIAN)_ENDIAN\).*/# \1 is not set/g' \
-e 's/.*\(ARCH_$(UCLIBC_TARGET_ENDIAN)_ENDIAN\).*/\1=y/g' \
-e 's/.*\(ARCH_WANTS_$(UCLIBC_TARGET_ENDIAN)_ENDIAN\).*/\1=y/g' \
- $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_LARGEFILE),y)
- $(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.oldconfig
else
- $(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.config
- $(SED) '/.*UCLIBC_HAS_FOPEN_LARGEFILE_MODE.*/d' $(UCLIBC_DIR)/.config
- echo "# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set" >> $(UCLIBC_DIR)/.config
+ $(SED) 's,.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.oldconfig
+ $(SED) '/.*UCLIBC_HAS_FOPEN_LARGEFILE_MODE.*/d' $(UCLIBC_DIR)/.oldconfig
+ echo "# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_INET_IPV6),y)
- $(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=y,g' $(UCLIBC_DIR)/.oldconfig
else
- $(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=n,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,^.*UCLIBC_HAS_IPV6.*,UCLIBC_HAS_IPV6=n,g' $(UCLIBC_DIR)/.oldconfig
endif
-ifeq ($(BR2_USE_WCHAR),y)
- $(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.config
-else
- $(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.config
-endif
-
ifeq ($(BR2_INET_RPC),y)
$(SED) 's,^.*UCLIBC_HAS_RPC.*,UCLIBC_HAS_RPC=y,g' \
-e 's,^.*UCLIBC_HAS_FULL_RPC.*,UCLIBC_HAS_FULL_RPC=y,g' \
-e 's,^.*UCLIBC_HAS_REENTRANT_RPC.*,UCLIBC_HAS_REENTRANT_RPC=y,g' \
- $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
else
$(SED) 's,^.*UCLIBC_HAS_RPC.*,UCLIBC_HAS_RPC=n,g' \
-e 's,^.*UCLIBC_HAS_FULL_RPC.*,UCLIBC_HAS_FULL_RPC=n,g' \
-e 's,^.*UCLIBC_HAS_REENTRANT_RPC.*,UCLIBC_HAS_REENTRANT_RPC=n,g' \
- $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_SOFT_FLOAT),y)
$(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n,g' \
-e 's,^[^_]*HAS_FPU.*,HAS_FPU=n,g' \
-e 's,.*UCLIBC_HAS_FLOATS.*,UCLIBC_HAS_FLOATS=y,g' \
-e 's,.*DO_C99_MATH.*,DO_C99_MATH=y,g' \
- $(UCLIBC_DIR)/.config
- #$(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n\nHAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
+ #$(SED) 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=n\nHAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.oldconfig
else
$(SED) '/UCLIBC_HAS_FLOATS/d' \
-e 's,.*UCLIBC_HAS_FPU.*,UCLIBC_HAS_FPU=y\nHAS_FPU=y\nUCLIBC_HAS_FLOATS=y\n,g' \
- $(UCLIBC_DIR)/.config
+ $(UCLIBC_DIR)/.oldconfig
endif
- $(SED) '/UCLIBC_HAS_THREADS/d' $(UCLIBC_DIR)/.config
- $(SED) '/LINUXTHREADS/d' $(UCLIBC_DIR)/.config
- $(SED) '/LINUXTHREADS_OLD/d' $(UCLIBC_DIR)/.config
- $(SED) '/PTHREADS_DEBUG_SUPPORT/d' $(UCLIBC_DIR)/.config
- $(SED) '/UCLIBC_HAS_THREADS_NATIVE/d' $(UCLIBC_DIR)/.config
+ $(SED) '/UCLIBC_HAS_THREADS/d' $(UCLIBC_DIR)/.oldconfig
+ $(SED) '/LINUXTHREADS/d' $(UCLIBC_DIR)/.oldconfig
+ $(SED) '/LINUXTHREADS_OLD/d' $(UCLIBC_DIR)/.oldconfig
+ $(SED) '/PTHREADS_DEBUG_SUPPORT/d' $(UCLIBC_DIR)/.oldconfig
+ $(SED) '/UCLIBC_HAS_THREADS_NATIVE/d' $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_PTHREADS_NONE),y)
- echo "# UCLIBC_HAS_THREADS is not set" >> $(UCLIBC_DIR)/.config
+ echo "# UCLIBC_HAS_THREADS is not set" >> $(UCLIBC_DIR)/.oldconfig
else
- echo "UCLIBC_HAS_THREADS=y" >> $(UCLIBC_DIR)/.config
+ echo "UCLIBC_HAS_THREADS=y" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREADS),y)
- echo "LINUXTHREADS=y" >> $(UCLIBC_DIR)/.config
+ echo "LINUXTHREADS=y" >> $(UCLIBC_DIR)/.oldconfig
else
- echo "# LINUXTHREADS is not set" >> $(UCLIBC_DIR)/.config
+ echo "# LINUXTHREADS is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREADS_OLD),y)
- echo "LINUXTHREADS_OLD=y" >> $(UCLIBC_DIR)/.config
+ echo "LINUXTHREADS_OLD=y" >> $(UCLIBC_DIR)/.oldconfig
else
- echo "# LINUXTHREADS_OLD is not set" >> $(UCLIBC_DIR)/.config
+ echo "# LINUXTHREADS_OLD is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREADS_NATIVE),y)
- echo "UCLIBC_HAS_THREADS_NATIVE=y" >> $(UCLIBC_DIR)/.config
+ echo "UCLIBC_HAS_THREADS_NATIVE=y" >> $(UCLIBC_DIR)/.oldconfig
else
- echo "# UCLIBC_HAS_THREADS_NATIVE is not set" >> $(UCLIBC_DIR)/.config
+ echo "# UCLIBC_HAS_THREADS_NATIVE is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_PTHREAD_DEBUG),y)
- echo "PTHREADS_DEBUG_SUPPORT=y" >> $(UCLIBC_DIR)/.config
+ echo "PTHREADS_DEBUG_SUPPORT=y" >> $(UCLIBC_DIR)/.oldconfig
else
- echo "# PTHREADS_DEBUG_SUPPORT is not set" >> $(UCLIBC_DIR)/.config
+ echo "# PTHREADS_DEBUG_SUPPORT is not set" >> $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_ENABLE_LOCALE),y)
- $(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=y\nUCLIBC_PREGENERATED_LOCALE_DATA=y\nUCLIBC_DOWNLOAD_PREGENERATED_LOCALE_DATA=y\nUCLIBC_HAS_XLOCALE=y\nUCLIBC_HAS_GLIBC_DIGIT_GROUPING=n\n,g' $(UCLIBC_DIR)/.config
- $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=y\nUCLIBC_PREGENERATED_LOCALE_DATA=y\nUCLIBC_DOWNLOAD_PREGENERATED_LOCALE_DATA=y\nUCLIBC_HAS_XLOCALE=y\nUCLIBC_HAS_GLIBC_DIGIT_GROUPING=n\n,g' $(UCLIBC_DIR)/.oldconfig
+ $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.oldconfig
else
- $(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=n,g' $(UCLIBC_DIR)/.config
- $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,^.*UCLIBC_HAS_LOCALE.*,UCLIBC_HAS_LOCALE=n,g' $(UCLIBC_DIR)/.oldconfig
+ $(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.oldconfig
endif
+ifeq ($(BR2_USE_WCHAR),y)
+ $(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.oldconfig
+else
+ $(SED) 's,^.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=n,g' $(UCLIBC_DIR)/.oldconfig
+endif
ifeq ("$(KERNEL_ARCH)","i386")
- /bin/echo "# CONFIG_GENERIC_386 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_386 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_486 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_586 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_586MMX is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_686 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_PENTIUMII is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_PENTIUMIII is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_PENTIUM4 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_K6 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_K7 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_ELAN is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_CRUSOE is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_WINCHIPC6 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_WINCHIP2 is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_CYRIXIII is not set" >> $(UCLIBC_DIR)/.config
- /bin/echo "# CONFIG_NEHEMIAH is not set" >> $(UCLIBC_DIR)/.config
+ /bin/echo "# CONFIG_GENERIC_386 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_386 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_486 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_586 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_586MMX is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_686 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_PENTIUMII is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_PENTIUMIII is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_PENTIUM4 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_K6 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_K7 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_ELAN is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_CRUSOE is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_WINCHIPC6 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_WINCHIP2 is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_CYRIXIII is not set" >> $(UCLIBC_DIR)/.oldconfig
+ /bin/echo "# CONFIG_NEHEMIAH is not set" >> $(UCLIBC_DIR)/.oldconfig
ifeq ($(BR2_x86_i386),y)
- $(SED) 's,# CONFIG_386 is not set,CONFIG_386=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,# CONFIG_386 is not set,CONFIG_386=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_i486),y)
- $(SED) 's,# CONFIG_486 is not set,CONFIG_486=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,# CONFIG_486 is not set,CONFIG_486=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_i586),y)
- $(SED) 's,# CONFIG_586 is not set,CONFIG_586=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,# CONFIG_586 is not set,CONFIG_586=y,g' $(UCLIBC_DIR)/.oldconfig
endif
ifeq ($(BR2_x86_i686),y)
- $(SED) 's,# CONFIG_686 is not set,CONFIG_686=y,g' $(UCLIBC_DIR)/.config
+ $(SED) 's,# CONFIG_686 is not set,CONFIG_686=y,g' $(UCLIBC_DIR)/.oldconfig
endif
endif
+
+$(UCLIBC_DIR)/.config: $(UCLIBC_DIR)/.oldconfig
+ cp -f $(UCLIBC_DIR)/.oldconfig $(UCLIBC_DIR)/.config
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/include
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/lib
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/lib
@@ -371,7 +370,7 @@
install_runtime
touch -c $@
-$(TARGET_DIR)/usr/bin/ldd: gcc
+$(TARGET_DIR)/usr/bin/ldd: $(TARGET_CROSS)gcc
$(MAKE1) -C $(UCLIBC_DIR) CC=$(TARGET_CROSS)gcc \
CPP=$(TARGET_CROSS)cpp LD=$(TARGET_CROSS)ld \
PREFIX=$(TARGET_DIR) utils install_utils
@@ -389,8 +388,10 @@
uclibc-source: $(DL_DIR)/$(UCLIBC_SOURCE)
-uclibc-config: $(UCLIBC_DIR)/.config
+uclibc-config: host-sed $(UCLIBC_DIR)/.config
+uclibc-oldconfig: host-sed $(UCLIBC_DIR)/.oldconfig
+
uclibc-configured: kernel-headers $(UCLIBC_DIR)/.configured
uclibc-configured-source: uclibc-source
next reply other threads:[~2007-08-14 7:07 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-14 7:07 ulf at uclibc.org [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-03-05 12:11 [Buildroot] svn commit: trunk/buildroot/toolchain/uClibc jacmet at uclibc.org
2009-03-03 20:23 jacmet at uclibc.org
2009-02-03 14:29 jacmet at uclibc.org
2009-02-03 14:28 jacmet at uclibc.org
2009-01-28 15:48 jacmet at uclibc.org
2009-01-24 6:44 jacmet at uclibc.org
2009-01-16 14:21 jacmet at uclibc.org
2009-01-12 15:57 jacmet at uclibc.org
2009-01-12 15:01 jacmet at uclibc.org
2009-01-12 14:11 jacmet at uclibc.org
2009-01-02 8:30 ulf at uclibc.org
2008-12-29 15:22 jacmet at uclibc.org
2008-12-23 10:21 jacmet at uclibc.org
2008-12-23 9:39 jacmet at uclibc.org
2008-12-07 21:22 jacmet at uclibc.org
2008-12-01 14:53 jacmet at uclibc.org
2008-12-01 14:23 egtvedt at uclibc.org
2008-12-01 14:23 egtvedt at uclibc.org
2008-12-01 13:02 egtvedt at uclibc.org
2008-10-20 18:55 jacmet at uclibc.org
2008-10-20 15:23 jacmet at uclibc.org
2008-10-07 7:32 egtvedt at uclibc.org
2008-10-07 7:20 egtvedt at uclibc.org
2008-09-30 7:29 egtvedt at uclibc.org
2008-08-04 19:07 jacmet at uclibc.org
2008-06-18 8:51 jacmet at uclibc.org
2008-06-18 8:51 jacmet at uclibc.org
2008-06-17 13:30 jacmet at uclibc.org
2008-06-17 15:53 ` Bernhard Fischer
2008-06-17 18:44 ` Peter Korsgaard
2008-06-18 7:10 ` Bernhard Fischer
2008-06-18 7:38 ` Peter Korsgaard
2008-06-18 8:29 ` Bernhard Fischer
2008-05-31 7:28 jacmet at uclibc.org
2008-05-31 7:28 jacmet at uclibc.org
2008-05-31 7:27 jacmet at uclibc.org
2008-04-24 9:03 jacmet at uclibc.org
2008-04-17 13:25 nkukard at uclibc.org
2008-03-29 17:34 nkukard at uclibc.org
2008-03-29 16:23 nkukard at uclibc.org
2008-03-29 16:56 ` Peter Korsgaard
2008-03-29 17:20 ` Nigel Kukard
2008-03-27 10:23 jacmet at uclibc.org
2008-03-27 10:23 jacmet at uclibc.org
2008-03-06 18:50 ninevoltz at uclibc.org
2008-03-06 21:54 ` Peter Korsgaard
2007-11-15 15:44 vanokuten at uclibc.org
2007-11-15 10:16 vanokuten at uclibc.org
2007-10-12 15:12 ulf at uclibc.org
2007-09-30 12:43 aldot at uclibc.org
2007-09-28 22:16 ulf at uclibc.org
2007-09-28 21:44 ulf at uclibc.org
2007-09-27 23:54 ulf at uclibc.org
2007-09-27 21:51 aldot at uclibc.org
2007-09-27 0:18 ulf at uclibc.org
2007-09-26 9:09 ulf at uclibc.org
2007-09-25 14:13 ulf at uclibc.org
2007-09-25 13:37 ulf at uclibc.org
2007-09-25 16:06 ` vano
2007-09-25 14:30 ` Ulf Samuelsson
2007-09-25 16:47 ` vano
2007-09-25 16:14 ` Ulf Samuelsson
2007-09-24 12:19 aldot at uclibc.org
2007-09-22 16:40 aldot at uclibc.org
2007-08-29 18:05 aldot at uclibc.org
2007-08-26 20:55 aldot at uclibc.org
2007-08-26 20:40 aldot at uclibc.org
2007-08-21 8:05 aldot at uclibc.org
2007-08-16 5:01 ulf at uclibc.org
2007-08-12 12:37 ulf at uclibc.org
2007-08-01 19:13 ulf at uclibc.org
2007-08-01 12:11 ulf at uclibc.org
2007-07-30 18:23 ulf at uclibc.org
2007-07-29 17:47 ulf at uclibc.org
2007-07-30 7:36 ` Bernhard Fischer
2007-07-30 14:34 ` Ulf Samuelsson
2007-07-29 17:40 ulf at uclibc.org
2007-07-29 17:32 ulf at uclibc.org
2007-07-23 11:32 aldot at uclibc.org
2007-07-20 10:49 ulf at uclibc.org
2007-07-08 12:05 aldot at uclibc.org
2007-07-07 23:54 aldot at uclibc.org
2007-07-07 10:39 aldot at uclibc.org
2007-07-07 16:40 ` BuraphaLinux Server
2007-07-05 5:13 sjhill at uclibc.org
2007-06-28 12:14 aldot at uclibc.org
2007-06-26 16:58 aldot at uclibc.org
2007-06-25 8:16 aldot at uclibc.org
2007-06-24 14:38 aldot at uclibc.org
2007-06-13 18:14 aldot at uclibc.org
2007-06-07 16:18 aldot at uclibc.org
2007-06-07 12:16 aldot at uclibc.org
2007-05-12 18:39 aldot at uclibc.org
2007-05-10 2:37 sjhill at uclibc.org
2007-05-10 2:37 sjhill at uclibc.org
2007-04-28 17:08 sjhill at uclibc.org
2007-04-15 9:51 aldot at uclibc.org
2007-03-22 16:23 andersen at uclibc.org
2007-02-28 22:01 andersen at uclibc.org
2007-02-22 8:53 jacmet at uclibc.org
2007-02-20 11:06 jacmet at uclibc.org
2007-02-15 11:24 aldot at uclibc.org
2007-02-14 13:28 aldot at uclibc.org
2007-02-10 21:24 aldot at uclibc.org
2007-02-09 17:53 aldot at uclibc.org
2007-02-06 18:35 aldot at uclibc.org
2007-02-05 13:01 aldot at uclibc.org
2007-02-02 13:50 aldot at uclibc.org
2007-01-30 17:45 aldot at uclibc.org
2007-01-29 22:23 andersen at uclibc.org
2007-01-29 22:21 andersen at uclibc.org
2007-01-29 16:44 jacmet at uclibc.org
2007-01-28 12:11 aldot at uclibc.org
2007-01-25 20:27 andersen at uclibc.org
2007-01-24 15:12 aldot at uclibc.org
2007-01-21 21:11 aldot at uclibc.org
2007-01-20 22:03 aldot at uclibc.org
2007-01-16 9:35 aldot at uclibc.org
2006-12-15 14:40 aldot at uclibc.org
2006-12-15 13:39 aldot at uclibc.org
2006-12-15 14:31 ` Ulrich Hecht
2006-12-15 14:43 ` Bernhard Fischer
2006-12-14 15:17 aldot at uclibc.org
2006-12-14 2:50 andersen at uclibc.org
2006-12-13 13:07 andersen at uclibc.org
2006-12-13 12:42 andersen at uclibc.org
2006-12-13 12:41 andersen at uclibc.org
2006-12-13 12:34 andersen at uclibc.org
2006-12-13 11:51 andersen at uclibc.org
2006-12-13 6:59 andersen at uclibc.org
2006-12-02 18:30 aldot at uclibc.org
2006-10-02 18:52 andersen at uclibc.org
2006-09-25 14:28 jacmet at uclibc.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070814070715.460EDA682F@busybox.net \
--to=ulf@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.