All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Buesch <mb@bu3sch.de>
To: bcm43xx-dev@lists.berlios.de
Cc: Christian Hoffmann <email@christianhoffmann.info>,
	linux-wireless@vger.kernel.org
Subject: Re: b43 with upstream-davem stacktrace
Date: Sat, 13 Oct 2007 17:26:14 +0200	[thread overview]
Message-ID: <200710131726.14289.mb@bu3sch.de> (raw)
In-Reply-To: <200710131823.33420.email@christianhoffmann.info>

On Saturday 13 October 2007 18:23:33 Christian Hoffmann wrote:
> Hi all,
> 
> I tried (I think) latest b43 driver on a bcm4318. It works quite well, but on 
> a series of connect/reconnect I had attached stack in dmesg.
> 
> Any idea?
> 
> Chris
> 
> FYI (normal dmesg output)
> b43-phy0: Broadcom 4318 WLAN found
> b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
> b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
> b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
> Registered led device: b43-phy0:tx
> Registered led device: b43-phy0:rx
> b43-phy0 debug: Chip initialized
> b43-phy0 debug: 32-bit DMA initialized
> b43-phy0 debug: Wireless interface started
> b43-phy0 debug: Adding Interface type 2
> 

I also saw this sometimes, but I have absolutely no idea how that happens.
Someone any idea?


> b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
> Registered led device: b43-phy0:tx
> Registered led device: b43-phy0:rx
> general protection fault: 0000 [1] SMP
> CPU 0
> Modules linked in: eeprom ircomm_tty ircomm af_packet snd_pcm_oss
> snd_mixer_oss snd_seq snd_seq_device radeon drm cpufreq_conservative
> cpufreq_userspace cpufreq _powersave powernow_k8 pcmcia snd_atiixp_modem
> arc4 snd_atiixp ecb blkcipher rc8 0211_simple snd_ac97_codec yenta_socket
> ac97_bus snd_pcm rsrc_nonstatic snd_time r snd pcmcia_core b43
> firmware_class parport_pc ohci1394 ide_cd ssb rfkill mac80 211 rtc_cmos
> irda crc_ccitt rtc_core k8temp rtc_lib cfg80211 led_class tifm_7xx1 output
> battery ac parport ieee1394 button cdrom tifm_core container soundcore s
> nd_page_alloc tg3 hwmon joydev input_polldev i2c_piix4 serio_raw ide_disk
> ehci_h cd ohci_hcd usbcore radeonfb fb_ddc i2c_algo_bit i2c_core edd ext3
> mbcache jbd f an atiixp ide_core thermal processor
> Pid: 2295, comm: NetworkManager Not tainted 2.6.23-rc9-default #1
> RIP: 0010:[<ffffffff802f38aa>]  [<ffffffff802f38aa>] strcmp+0x0/0x1a
> RSP: 0018:ffff810078fe5740  EFLAGS: 00010283
> RAX: ffff81007d1f5f70 RBX: ffff81007d1f5f40 RCX: ffffffff80418988
> RDX: ffffffff881ed3d0 RSI: ffffffff8048498b RDI: 66355f306e616c77
> RBP: ffff81007da723a8 R08: 0000000000000000 R09: 0000000000000000
> R10: ffffffff881ed3a0 R11: ffffffff803921b5 R12: ffff81007da72000
> R13: 0000000000000001 R14: 0000000000000000 R15: 66355f306e616c77
> FS:  0000000040800950(0063) GS:ffffffff804fc000(0000)
> knlGS:0000000000000000 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000616278 CR3: 0000000079556000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process NetworkManager (pid: 2295, threadinfo ffff810078fe4000, task
> ffff810079f be040)
> Stack:  ffffffff803861f8 ffff81007da723a8 ffff81007da723a8 0000000000000000
>  ffffffff881ec218 ffff81007da72000 ffff81007da7240a ffff81007da723a0
>  ffffffff882da4ba ffff810078fe57f8 0000000000000000 ffff81007d5802e0
> Call Trace:
>  [<ffffffff803861f8>] led_trigger_set_default+0x3a/0x77
>  [<ffffffff881ec218>] :led_class:led_classdev_register+0xb9/0x10d
>  [<ffffffff882da4ba>] :b43:b43_register_led+0x83/0xb6
>  [<ffffffff882da750>] :b43:b43_leds_init+0x263/0x293
>  [<ffffffff8828501d>] :ssb:ssb_pci_switch_core+0x40/0x4b
>  [<ffffffff882cae47>] :b43:b43_chip_init+0x56c/0x8d6
>  [<ffffffff882cb435>] :b43:b43_wireless_core_init+0x284/0x766
>  [<ffffffff882cc585>] :b43:b43_start+0x2e/0x6d
>  [<ffffffff8824d8e9>] :mac80211:ieee80211_open+0x1b6/0x39d
>  [<ffffffff8039704a>] dev_open+0x2f/0x67
>  [<ffffffff80395c8a>] dev_change_flags+0xaa/0x161
>  [<ffffffff8039db81>] do_setlink+0x279/0x34b
>  [<ffffffff8039e60b>] rtnetlink_rcv_msg+0x0/0x1dc
>  [<ffffffff8039edcf>] rtnl_setlink+0xf5/0x116
>  [<ffffffff803ab484>] netlink_run_queue+0x68/0xf7
>  [<ffffffff8039e587>] rtnetlink_rcv+0x28/0x43
>  [<ffffffff803aba04>] netlink_data_ready+0x12/0x50
>  [<ffffffff803aa6fa>] netlink_sendskb+0x23/0x3c
>  [<ffffffff803ab9df>] netlink_sendmsg+0x2ac/0x2bf
>  [<ffffffff80391845>] memcpy_fromiovec+0x36/0x66
>  [<ffffffff8038a98c>] sock_sendmsg+0xea/0x107
>  [<ffffffff8024699f>] autoremove_wake_function+0x0/0x2e
>  [<ffffffff8024699f>] autoremove_wake_function+0x0/0x2e
>  [<ffffffff8024699f>] autoremove_wake_function+0x0/0x2e
>  [<ffffffff8038abc0>] sys_sendmsg+0x217/0x28a
>  [<ffffffff803aa9b8>] netlink_insert+0x13c/0x14b
>  [<ffffffff8038bb35>] sys_getsockname+0x9c/0xb2
>  [<ffffffff8020bc8e>] system_call+0x7e/0x83
>
>
> Code: 8a 17 88 d0 2a 06 48 ff c6 84 c0 75 09 84 d2 74 05 48 ff c7
> RIP  [<ffffffff802f38aa>] strcmp+0x0/0x1a
>  RSP <ffff810078fe5740>
> (none):~ #

-- 
Greetings Michael.

       reply	other threads:[~2007-10-13 15:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200710131823.33420.email@christianhoffmann.info>
2007-10-13 15:26 ` Michael Buesch [this message]
2007-10-14  9:42   ` b43 with upstream-davem stacktrace Johannes Berg
2007-10-15  9:05     ` Richard Purdie
2007-10-15 12:56       ` Michael Buesch
2007-10-15 19:30       ` Christian Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200710131726.14289.mb@bu3sch.de \
    --to=mb@bu3sch.de \
    --cc=bcm43xx-dev@lists.berlios.de \
    --cc=email@christianhoffmann.info \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.