All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Schwarzott <zzam@gentoo.org>
To: Eduard Huguet <eduardhc@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Some tests on Avermedia A700
Date: Wed, 13 Feb 2008 14:29:48 +0100	[thread overview]
Message-ID: <200802131429.48596.zzam@gentoo.org> (raw)
In-Reply-To: <47B2E157.3050702@gmail.com>

On Mittwoch, 13. Februar 2008, Eduard Huguet wrote:
> Hi,
>     Here you have the dmesg output of "modprobe saa7134 i2c_scan=1":
>
> [  773.619247] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 23,
> latency: 64, mmio: 0xf7ffa800
> [  773.619258] saa7133[0]: subsystem: 1461:a7a1, board: Avermedia A700
> [card=132,autodetected]
> [  773.619273] saa7133[0]: board init: gpio is 2f200
> [  773.865218] saa7133[0]: i2c eeprom 00: 61 14 a1 a7 ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865270] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865312] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865351] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865393] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865433] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865459] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865702] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865727] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865753] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865780] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865810] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865840] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865868] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.865897] saa7133[0]: i2c eeprom e0: 00 01 81 af ea b5 ff ff ff ff
> ff ff ff ff ff ff
> [  773.865923] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff
> [  773.870157] saa7133[0]: i2c scan: found device @ 0x1c  [???]
> [  773.883118] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
> [  773.891907] saa7133[0]: registered device video0 [v4l2]
> [  773.892250] saa7133[0]: registered device vbi0
> [  774.011780] zl1003x_attach: tuner initialization (Zarlink ZL10036
> addr=0x60) ok
> [  774.011805] DVB: registering new adapter (saa7133[0])
> [  774.011819] DVB: registering frontend 0 (Zarlink ZL10313 DVB-S)...
>
>
> These are the results of "lspci -vvnn" (after loading the driver):
>
> 00:09.0 Multimedia controller [0480]: Philips Semiconductors
> SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
>         Subsystem: Avermedia Technologies Inc Unknown device [1461:a7a1]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 64 (63750ns min, 63750ns max)
>         Interrupt: pin A routed to IRQ 23
>         Region 0: Memory at f7ffa800 (32-bit, non-prefetchable) [size=2K]
>         Capabilities: [40] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=3 PME-
>         Kernel driver in use: saa7134
>         Kernel modules: saa7134
>
added note about different gpio values and eeprom content to wiki.

Regards
Matthias
-- 
Matthias Schwarzott (zzam)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-02-13 13:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-09 15:34 [linux-dvb] Some tests on Avermedia A700 Eduard Huguet
2008-02-09 21:14 ` Matthias Schwarzott
2008-02-10 10:20   ` Eduard Huguet
2008-02-11  9:18     ` Eduard Huguet
2008-02-11  9:20     ` Eduard Huguet
2008-02-12 21:08       ` Matthias Schwarzott
2008-02-13 12:23         ` Eduard Huguet
2008-02-13 13:29           ` Matthias Schwarzott [this message]
2008-02-13 13:33     ` Matthias Schwarzott
2008-02-13 15:37       ` Eduard Huguet
2008-02-13 15:51         ` Matthias Schwarzott
2008-02-13 16:03           ` Eduard Huguet
2008-02-17 19:40             ` Matthias Schwarzott
2008-02-18 11:28               ` Eduard Huguet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200802131429.48596.zzam@gentoo.org \
    --to=zzam@gentoo.org \
    --cc=eduardhc@gmail.com \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.