From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758387AbYBOQDf (ORCPT ); Fri, 15 Feb 2008 11:03:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1757540AbYBOQDU (ORCPT ); Fri, 15 Feb 2008 11:03:20 -0500 Received: from havoc.gtf.org ([69.61.125.42]:47933 "EHLO havoc.gtf.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756743AbYBOQDP (ORCPT ); Fri, 15 Feb 2008 11:03:15 -0500 Date: Fri, 15 Feb 2008 11:03:14 -0500 From: Jeff Garzik To: David Miller Cc: netdev@vger.kernel.org, LKML Subject: [git patches] net driver fixes Message-ID: <20080215160314.GA13609@havoc.gtf.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.17 (2007-11-01) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Process note: 'upstream-davem' continues the git history that began the previous push. This sometimes happens when I continue to commit locally, working in parallel while waiting for changes to hit Linus upstream. As current net-2.6.git appears to have the same commit ids that I submitted in the previous push, this should be no problem at all, just wanted you to know. Please pull from 'upstream-davem' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-davem to receive the following updates: drivers/net/e1000/e1000_ethtool.c | 2 +- drivers/net/e1000/e1000_main.c | 8 ++++ drivers/net/e1000e/netdev.c | 34 ++--------------- drivers/net/gianfar.c | 4 +- drivers/net/gianfar_mii.c | 4 +- drivers/net/hamradio/mkiss.c | 5 +-- drivers/net/igb/igb_ethtool.c | 2 +- drivers/net/igb/igb_main.c | 28 -------------- drivers/net/ixgb/ixgb_ethtool.c | 2 +- drivers/net/ixgbe/ixgbe_main.c | 41 +++++++++++++++++---- drivers/net/pcmcia/smc91c92_cs.c | 12 +++++- drivers/net/tsi108_eth.c | 72 +++++++++++++++++++++++++----------- 12 files changed, 114 insertions(+), 100 deletions(-) Al Viro (1): gianfar iomem misannotations Alex Bounine (5): Tsi108_eth: add missing linking to driver data Tsi108_eth: fix detection of 1000Mb mode Tsi108_eth: remove not needed code Tsi108_eth: fix link recovery after disconnect Tsi108_eth: Add ethtool support Auke Kok (7): e1000: warn if this driver is used for e1000e devices e1000e: Fix logic reversal keeping link active ixgbe: warn when device is in a x4 or lower width slot ixgbe: Disallow device reset during ethtool test ixgbe: remove accidentally added #ifdef e1000e: Fix CRC stripping in hardware context bug ixgbe: Correctly obtain protocol information on transmit Chuck Ebbert (1): Fix station address detection in smc David Graham (2): igb: PCIe devices do not need to unset MANC_ARP_ENA e1000e: PCIe devices do not need to unset MANC_ARP_ENA Jarek Poplawski (1): mkiss: ax_bump() locking fix Julia Lawall (1): replace code with FIELD_SIZEOF diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index d876787..85e66f4 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -50,7 +50,7 @@ struct e1000_stats { int stat_offset; }; -#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \ +#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \ offsetof(struct e1000_adapter, m) static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_packets", E1000_STAT(stats.gprc) }, diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d4ee8ec..0991648 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1195,6 +1195,14 @@ e1000_probe(struct pci_dev *pdev, printk("%s\n", print_mac(mac, netdev->dev_addr)); + if (adapter->hw.bus_type == e1000_bus_type_pci_express) { + DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no " + "longer be supported by this driver in the future.\n", + pdev->vendor, pdev->device); + DPRINTK(PROBE, WARNING, "please use the \"e1000e\" " + "driver instead.\n"); + } + /* reset the hardware with the new settings */ e1000_reset(adapter); diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f58f017..3031d6d 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1055,23 +1055,6 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter) } } -static void e1000_release_manageability(struct e1000_adapter *adapter) -{ - if (adapter->flags & FLAG_MNG_PT_ENABLED) { - struct e1000_hw *hw = &adapter->hw; - - u32 manc = er32(MANC); - - /* re-enable hardware interception of ARP */ - manc |= E1000_MANC_ARP_EN; - manc &= ~E1000_MANC_EN_MNG2HOST; - - /* don't explicitly have to mess with MANC2H since - * MANC has an enable disable that gates MANC2H */ - ew32(MANC, manc); - } -} - /** * @e1000_alloc_ring - allocate memory for a ring structure **/ @@ -1561,9 +1544,6 @@ static void e1000_init_manageability(struct e1000_adapter *adapter) manc = er32(MANC); - /* disable hardware interception of ARP */ - manc &= ~(E1000_MANC_ARP_EN); - /* enable receiving management packets to the host. this will probably * generate destination unreachable messages from the host OS, but * the packets will be handled on SMBUS */ @@ -1690,6 +1670,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; + /* Enable hardware CRC frame stripping */ + rctl |= E1000_RCTL_SECRC; + /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; @@ -1755,9 +1738,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* Enable Packet split descriptors */ rctl |= E1000_RCTL_DTYP_PS; - - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; @@ -2008,7 +1988,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) u16 mii_reg; /* WoL is enabled */ - if (!adapter->wol) + if (adapter->wol) return; /* non-copper PHY? */ @@ -2140,8 +2120,6 @@ void e1000e_reset(struct e1000_adapter *adapter) phy_data &= ~IGP02E1000_PM_SPD; e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); } - - e1000_release_manageability(adapter); } int e1000e_up(struct e1000_adapter *adapter) @@ -3487,8 +3465,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - e1000_release_manageability(adapter); - /* make sure adapter isn't asleep if manageability is enabled */ if (adapter->flags & FLAG_MNG_PT_ENABLED) { pci_enable_wake(pdev, PCI_D3hot, 1); @@ -4054,8 +4030,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev) flush_scheduled_work(); - e1000_release_manageability(adapter); - /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 0431e9e..4244fc2 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -130,8 +130,8 @@ static void free_skb_resources(struct gfar_private *priv); static void gfar_set_multi(struct net_device *dev); static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); static void gfar_configure_serdes(struct net_device *dev); -extern int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value); -extern int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum); +extern int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value); +extern int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); #ifdef CONFIG_GFAR_NAPI static int gfar_poll(struct napi_struct *napi, int budget); #endif diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index 6a647d9..2432762 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -51,7 +51,7 @@ * the local mdio pins, which may not be the same as system mdio bus, used for * controlling the external PHYs, for example. */ -int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, +int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value) { /* Set the PHY address and the register address we want to write */ @@ -77,7 +77,7 @@ int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, * and are always tied to the local mdio pins, which may not be the * same as system mdio bus, used for controlling the external PHYs, for eg. */ -int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum) +int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum) { u16 value; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index cfcd15a..30c9b3b 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -289,7 +289,6 @@ static void ax_bump(struct mkiss *ax) *ax->rbuff &= ~0x20; } } - spin_unlock_bh(&ax->buflock); count = ax->rcount; @@ -297,17 +296,17 @@ static void ax_bump(struct mkiss *ax) printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name); ax->stats.rx_dropped++; + spin_unlock_bh(&ax->buflock); return; } - spin_lock_bh(&ax->buflock); memcpy(skb_put(skb,count), ax->rbuff, count); - spin_unlock_bh(&ax->buflock); skb->protocol = ax25_type_trans(skb, ax->dev); netif_rx(skb); ax->dev->last_rx = jiffies; ax->stats.rx_packets++; ax->stats.rx_bytes += count; + spin_unlock_bh(&ax->buflock); } static void kiss_unesc(struct mkiss *ax, unsigned char s) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index f69721e..0447f9b 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -43,7 +43,7 @@ struct igb_stats { int stat_offset; }; -#define IGB_STAT(m) sizeof(((struct igb_adapter *)0)->m), \ +#define IGB_STAT(m) FIELD_SIZEOF(struct igb_adapter, m), \ offsetof(struct igb_adapter, m) static const struct igb_stats igb_gstrings_stats[] = { { "rx_packets", IGB_STAT(stats.gprc) }, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index d4eb8e2..bff280e 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -606,9 +606,6 @@ static void igb_init_manageability(struct igb_adapter *adapter) u32 manc2h = rd32(E1000_MANC2H); u32 manc = rd32(E1000_MANC); - /* disable hardware interception of ARP */ - manc &= ~(E1000_MANC_ARP_EN); - /* enable receiving management packets to the host */ /* this will probably generate destination unreachable messages * from the host OS, but the packets will be handled on SMBUS */ @@ -623,25 +620,6 @@ static void igb_init_manageability(struct igb_adapter *adapter) } } -static void igb_release_manageability(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - if (adapter->en_mng_pt) { - u32 manc = rd32(E1000_MANC); - - /* re-enable hardware interception of ARP */ - manc |= E1000_MANC_ARP_EN; - manc &= ~E1000_MANC_EN_MNG2HOST; - - /* don't explicitly have to mess with MANC2H since - * MANC has an enable disable that gates MANC2H */ - - /* XXX stop the hardware watchdog ? */ - wr32(E1000_MANC, manc); - } -} - /** * igb_configure - configure the hardware for RX and TX * @adapter: private board structure @@ -844,7 +822,6 @@ void igb_reset(struct igb_adapter *adapter) igb_reset_adaptive(&adapter->hw); adapter->hw.phy.ops.get_phy_info(&adapter->hw); - igb_release_manageability(adapter); } /** @@ -1178,9 +1155,6 @@ static void __devexit igb_remove(struct pci_dev *pdev) flush_scheduled_work(); - - igb_release_manageability(adapter); - /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ igb_release_hw_control(adapter); @@ -3955,8 +3929,6 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - igb_release_manageability(adapter); - /* make sure adapter isn't asleep if manageability is enabled */ if (adapter->en_mng_pt) { pci_enable_wake(pdev, PCI_D3hot, 1); diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index a267dd8..53a9fd0 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -49,7 +49,7 @@ struct ixgb_stats { int stat_offset; }; -#define IXGB_STAT(m) sizeof(((struct ixgb_adapter *)0)->m), \ +#define IXGB_STAT(m) FIELD_SIZEOF(struct ixgb_adapter, m), \ offsetof(struct ixgb_adapter, m) static struct ixgb_stats ixgb_gstrings_stats[] = { {"rx_packets", IXGB_STAT(net_stats.rx_packets)}, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index ead49e5..23d0a4a 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -220,7 +220,6 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, tx_ring->stats.bytes += tx_buffer_info->length; if (cleaned) { struct sk_buff *skb = tx_buffer_info->skb; -#ifdef NETIF_F_TSO unsigned int segs, bytecount; segs = skb_shinfo(skb)->gso_segs ?: 1; /* multiply data chunks by size of headers */ @@ -228,10 +227,6 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, skb->len; total_tx_packets += segs; total_tx_bytes += bytecount; -#else - total_tx_packets++; - total_tx_bytes += skb->len; -#endif } ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info); @@ -1942,6 +1937,10 @@ static int ixgbe_open(struct net_device *netdev) int err; u32 num_rx_queues = adapter->num_rx_queues; + /* disallow open during test */ + if (test_bit(__IXGBE_TESTING, &adapter->state)) + return -EBUSY; + try_intr_reinit: /* allocate transmit descriptors */ err = ixgbe_setup_all_tx_resources(adapter); @@ -2278,11 +2277,29 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter, IXGBE_ADVTXD_DTYP_CTXT); if (skb->ip_summed == CHECKSUM_PARTIAL) { - if (skb->protocol == htons(ETH_P_IP)) + switch (skb->protocol) { + case __constant_htons(ETH_P_IP): type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4; + if (ip_hdr(skb)->protocol == IPPROTO_TCP) + type_tucmd_mlhl |= + IXGBE_ADVTXD_TUCMD_L4T_TCP; + break; + + case __constant_htons(ETH_P_IPV6): + /* XXX what about other V6 headers?? */ + if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + type_tucmd_mlhl |= + IXGBE_ADVTXD_TUCMD_L4T_TCP; + break; - if (skb->sk->sk_protocol == IPPROTO_TCP) - type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP; + default: + if (unlikely(net_ratelimit())) { + DPRINTK(PROBE, WARNING, + "partial checksum but proto=%x!\n", + skb->protocol); + } + break; + } } context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl); @@ -2778,6 +2795,14 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->mac.type, hw->phy.type, (part_num >> 8), (part_num & 0xff)); + if (link_width <= IXGBE_PCI_LINK_WIDTH_4) { + dev_warn(&pdev->dev, "PCI-Express bandwidth available for " + "this card is not sufficient for optimal " + "performance.\n"); + dev_warn(&pdev->dev, "For optimal performance a x8 " + "PCI-Express slot is required.\n"); + } + /* reset the hardware with the new settings */ ixgbe_start_hw(hw); diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index f18eca9..250eb19 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -559,8 +559,16 @@ static int mhz_setup(struct pcmcia_device *link) /* Read the station address from the CIS. It is stored as the last (fourth) string in the Version 1 Version/ID tuple. */ - if (link->prod_id[3]) { - station_addr = link->prod_id[3]; + tuple->DesiredTuple = CISTPL_VERS_1; + if (first_tuple(link, tuple, parse) != CS_SUCCESS) { + rc = -1; + goto free_cfg_mem; + } + /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ + if (next_tuple(link, tuple, parse) != CS_SUCCESS) + first_tuple(link, tuple, parse); + if (parse->version_1.ns > 3) { + station_addr = parse->version_1.str + parse->version_1.ofs[3]; if (cvt_ascii_address(dev, station_addr) == 0) { rc = 0; goto free_cfg_mem; diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 35d15e8..6f33f84 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -297,18 +298,11 @@ static void tsi108_check_phy(struct net_device *dev) u32 speed; unsigned long flags; - /* Do a dummy read, as for some reason the first read - * after a link becomes up returns link down, even if - * it's been a while since the link came up. - */ - spin_lock_irqsave(&phy_lock, flags); if (!data->phy_ok) goto out; - tsi108_read_mii(data, MII_BMSR); - duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media); data->init_media = 0; @@ -345,22 +339,21 @@ static void tsi108_check_phy(struct net_device *dev) TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg); TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg); + } - if (data->link_up == 0) { - /* The manual says it can take 3-4 usecs for the speed change - * to take effect. - */ - udelay(5); + if (data->link_up == 0) { + /* The manual says it can take 3-4 usecs for the speed change + * to take effect. + */ + udelay(5); - spin_lock(&data->txlock); - if (is_valid_ether_addr(dev->dev_addr) && data->txfree) - netif_wake_queue(dev); + spin_lock(&data->txlock); + if (is_valid_ether_addr(dev->dev_addr) && data->txfree) + netif_wake_queue(dev); - data->link_up = 1; - spin_unlock(&data->txlock); - } + data->link_up = 1; + spin_unlock(&data->txlock); } - } else { if (data->link_up == 1) { netif_stop_queue(dev); @@ -1274,12 +1267,11 @@ static void tsi108_init_phy(struct net_device *dev) * PHY_STAT register before the link up status bit is set. */ - data->link_up = 1; + data->link_up = 0; while (!((phyval = tsi108_read_mii(data, MII_BMSR)) & BMSR_LSTATUS)) { if (i++ > (MII_READ_DELAY / 10)) { - data->link_up = 0; break; } spin_unlock_irqrestore(&phy_lock, flags); @@ -1287,6 +1279,7 @@ static void tsi108_init_phy(struct net_device *dev) spin_lock_irqsave(&phy_lock, flags); } + data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval); data->phy_ok = 1; data->init_media = 1; @@ -1527,12 +1520,46 @@ static void tsi108_init_mac(struct net_device *dev) TSI_WRITE(TSI108_EC_INTMASK, ~0); } +static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + unsigned long flags; + int rc; + + spin_lock_irqsave(&data->txlock, flags); + rc = mii_ethtool_gset(&data->mii_if, cmd); + spin_unlock_irqrestore(&data->txlock, flags); + + return rc; +} + +static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct tsi108_prv_data *data = netdev_priv(dev); + unsigned long flags; + int rc; + + spin_lock_irqsave(&data->txlock, flags); + rc = mii_ethtool_sset(&data->mii_if, cmd); + spin_unlock_irqrestore(&data->txlock, flags); + + return rc; +} + static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct tsi108_prv_data *data = netdev_priv(dev); + if (!netif_running(dev)) + return -EINVAL; return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL); } +static const struct ethtool_ops tsi108_ethtool_ops = { + .get_link = ethtool_op_get_link, + .get_settings = tsi108_get_settings, + .set_settings = tsi108_set_settings, +}; + static int tsi108_init_one(struct platform_device *pdev) { @@ -1584,7 +1611,6 @@ tsi108_init_one(struct platform_device *pdev) data->mii_if.phy_id = einfo->phy; data->mii_if.phy_id_mask = 0x1f; data->mii_if.reg_num_mask = 0x1f; - data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); data->phy = einfo->phy; data->phy_type = einfo->phy_type; @@ -1598,6 +1624,7 @@ tsi108_init_one(struct platform_device *pdev) dev->get_stats = tsi108_get_stats; netif_napi_add(dev, &data->napi, tsi108_poll, 64); dev->do_ioctl = tsi108_do_ioctl; + dev->ethtool_ops = &tsi108_ethtool_ops; /* Apparently, the Linux networking code won't use scatter-gather * if the hardware doesn't do checksums. However, it's faster @@ -1629,6 +1656,7 @@ tsi108_init_one(struct platform_device *pdev) goto register_fail; } + platform_set_drvdata(pdev, dev); printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n", dev->name, print_mac(mac, dev->dev_addr)); #ifdef DEBUG