From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Wed, 28 Jan 2009 22:05:59 +0100 Subject: [U-Boot] [PATCH] Add support for the digsy MTC board. In-Reply-To: <12331552753467-git-send-email-gjb@semihalf.com> References: <12331552753467-git-send-email-gjb@semihalf.com> Message-ID: <20090128210559.8CF2A832E416@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Grzegorz, In message <12331552753467-git-send-email-gjb@semihalf.com> you wrote: > This is the InterControl custom device based on the MPC5200B chip. ... General comment: there is a lot of code which could use a few comments so the reader has a chance to understand what exactly you are doing. > --- /dev/null > +++ b/board/digsymtc/digsymtc.c ... > +static void sdram_start(int hi_addr) > +{ > + long hi_addr_bit = hi_addr ? 0x01000000 : 0; > + long control = SDRAM_CONTROL | hi_addr_bit; > + > + /* unlock mode register */ > + *(vu_long *)MPC5XXX_SDRAM_CTRL = control | 0x80000000; > + __asm__ volatile ("sync"); > + > + /* precharge all banks */ > + *(vu_long *)MPC5XXX_SDRAM_CTRL = control | 0x80000002; > + __asm__ volatile ("sync"); > + > + /* auto refresh */ > + *(vu_long *)MPC5XXX_SDRAM_CTRL = control | 0x80000004; > + __asm__ volatile ("sync"); > + > + /* set mode register */ > + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; > + __asm__ volatile ("sync"); > + > + /* normal operation */ > + *(vu_long *)MPC5XXX_SDRAM_CTRL = control; > + __asm__ volatile ("sync"); Please use proper I/O accessor functions instead of volatile pointer accesses, here and in all other similar places as well... You can then get rid of the "sync"s as well. > +phys_size_t initdram(int board_type) > +{ > + ulong dramsize = 0; > + ulong dramsize2 = 0; > + uint svr, pvr; > +#ifndef CONFIG_SYS_RAMBOOT > + ulong test1, test2; > + > + /* setup SDRAM chip selects */ > + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001C; /* 512MB at 0x0 */ > + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ ... like here and below. > + if (s != NULL) { puts(", "); puts(s); } Please use proper indentation. > +void set_ethaddr(void) Please add "static" here. > +int last_stage_init (void) > +{ > + set_ethaddr(); > + return 0; You should do this only as long as "ethaddr" is not already set in the environment. > --- /dev/null > +++ b/board/digsymtc/eeprom.h ... > + > +#define EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR > +#define EEPROM_LEN 1024 > +#define EEPROM_IDENT 2408 > +#define EEPROM_ADDR_IDENT 0x0000 > +#define EEPROM_ADDR_LEN_SYS 0x0002 > +#define EEPROM_ADDR_LEN_SYSCFG 0x0004 > +#define EEPROM_OFF_ETHADDR 23 You want to add some comments what all these magic defines mean... > diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c > index df5b4ac..07d33e3 100644 > --- a/cpu/mpc5xxx/ide.c > +++ b/cpu/mpc5xxx/ide.c > @@ -12,7 +12,7 @@ > * > * This program is distributed in the hope that it will be useful, > * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > * GNU General Public License for more details. > * > * You should have received a copy of the GNU General Public License Please don't arbitrarily reformat the code. > --- /dev/null > +++ b/include/configs/digsymtc.h ... > +#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */ ... > + "console=ttyPSC1\0" \ This looks fishy to me - is it PSC1 or PSC4 ? > +#define OF_CPU "PowerPC,5200 at 0" > +#define OF_SOC "soc5200 at f0000000" > +#define OF_TBCLK (bd->bi_busfreq / 4) > +#define OF_STDOUT_PATH "/soc5200 at f0000000/serial at 2600" Do we really need this? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de All he had was nothing, but that was something, and now it had been taken away. - Terry Pratchett, _Sourcery_