From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Wed, 04 Mar 2009 21:58:46 +0000 Subject: Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I Message-Id: <20090304225846.06e08c77@hyperion.delvare> List-Id: References: <200903041438.45638.zbiggy@o2.pl> In-Reply-To: <200903041438.45638.zbiggy@o2.pl> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Wed, 4 Mar 2009 22:13:35 +0100, Zbigniew Luszpinski wrote: > Wednesday 04 of March 2009 15:21:47 you wrote: > > Please send the output of "lspci -vv -s 00:01.1". >=20 > 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1) > Subsystem: ASRock Incorporation K10N78FullHD-hSLI R3.0 SMBus > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParEr= r-=20 > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=FAst >TAbort-=20 > SERR- Interrupt: pin A routed to IRQ 7 > Region 0: I/O ports at 2900 [sized] > Region 4: I/O ports at 2d00 [sized] > Region 5: I/O ports at 2e00 [sized] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA=20 > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- This looks reasonably similar to the other SMBus controllers from nVidia. Are you willing to take your chance? If you are, here's what you need to do (as root): # modprobe i2c-nforce2 # echo "10de 0752" > /sys/bus/pci/drivers/nForce2_smbus/new_id # modprobe i2c-dev # i2cdetect -l # i2cdetect # i2cdetect where and are the i2c bus numbers of the two nForce SMBus channels. If this gives resonable results I will add the new device ID to the sensors-detect script and the i2c-nforce2 driver. --=20 Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors