From mboxrd@z Thu Jan 1 00:00:00 1970 From: akpm@linux-foundation.org Subject: [merged] fb-add-s3c-fb-driver-for-newer-samsung-soc-framebuffer-devices.patch removed from -mm tree Date: Wed, 01 Apr 2009 11:44:02 -0700 Message-ID: <200904011844.n31Ii2bg010283@imap1.linux-foundation.org> Reply-To: linux-kernel@vger.kernel.org Return-path: Received: from smtp1.linux-foundation.org ([140.211.169.13]:41544 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933672AbZDASqg (ORCPT ); Wed, 1 Apr 2009 14:46:36 -0400 Sender: mm-commits-owner@vger.kernel.org List-Id: mm-commits@vger.kernel.org To: ben-linux@fluff.org, krzysztof.h1@poczta.fm, mm-commits@vger.kernel.org The patch titled fb: add s3c-fb driver for newer Samsung SoC framebuffer devices has been removed from the -mm tree. Its filename was fb-add-s3c-fb-driver-for-newer-samsung-soc-framebuffer-devices.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: fb: add s3c-fb driver for newer Samsung SoC framebuffer devices From: Ben Dooks Add support for the newer Samsung devices, such as found in the S3C2443, S3C6400 or S3C6410 series SoC. It currently does not support all the alpha- or chroma-key options but it will support more exporting more than one framebuffer ready for adding overlay and blending functions. Signed-off-by: Ben Dooks Cc: Krzysztof Helt Signed-off-by: Andrew Morton --- drivers/video/Kconfig | 24 drivers/video/Makefile | 1 drivers/video/s3c-fb.c | 1036 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 1061 insertions(+) diff -puN drivers/video/Kconfig~fb-add-s3c-fb-driver-for-newer-samsung-soc-framebuffer-devices drivers/video/Kconfig --- a/drivers/video/Kconfig~fb-add-s3c-fb-driver-for-newer-samsung-soc-framebuffer-devices +++ a/drivers/video/Kconfig @@ -1920,6 +1920,30 @@ config FB_TMIO_ACCELL depends on FB_TMIO default y +config FB_S3C + tristate "Samsung S3C framebuffer support" + depends on FB && ARCH_S3C64XX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the built-in FB controller in the Samsung + SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, + and the S3C64XX series such as the S3C6400 and S3C6410. + + These chips all have the same basic framebuffer design with the + actual capabilities depending on the chip. For instance the S3C6400 + and S3C6410 support 4 hardware windows whereas the S3C24XX series + currently only have two. + + Currently the support is only for the S3C6400 and S3C6410 SoCs. + +config FB_S3C_DEBUG_REGWRITE + bool "Debug register writes" + depends on FB_S3C + ---help--- + Show all register writes via printk(KERN_DEBUG) + config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" depends on FB && ARCH_S3C2410 diff -puN drivers/video/Makefile~fb-add-s3c-fb-driver-for-newer-samsung-soc-framebuffer-devices drivers/video/Makefile --- a/drivers/video/Makefile~fb-add-s3c-fb-driver-for-newer-samsung-soc-framebuffer-devices +++ a/drivers/video/Makefile @@ -111,6 +111,7 @@ obj-$(CONFIG_FB_BROADSHEET) += bro obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o +obj-$(CONFIG_FB_S3C) += s3c-fb.o obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o diff -puN /dev/null drivers/video/s3c-fb.c --- /dev/null +++ a/drivers/video/s3c-fb.c @@ -0,0 +1,1036 @@ +/* linux/drivers/video/s3c-fb.c + * + * Copyright 2008 Openmoko Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Samsung SoC Framebuffer driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* This driver will export a number of framebuffer interfaces depending + * on the configuration passed in via the platform data. Each fb instance + * maps to a hardware window. Currently there is no support for runtime + * setting of the alpha-blending functions that each window has, so only + * window 0 is actually useful. + * + * Window 0 is treated specially, it is used for the basis of the LCD + * output timings and as the control for the output power-down state. +*/ + +/* note, some of the functions that get called are derived from including + * as they are specific to the architecture that the code + * is being built for. +*/ + +#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE +#undef writel +#define writel(v, r) do { \ + printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \ + __raw_writel(v, r); } while(0) +#endif /* FB_S3C_DEBUG_REGWRITE */ + +struct s3c_fb; + +/** + * struct s3c_fb_win - per window private data for each framebuffer. + * @windata: The platform data supplied for the window configuration. + * @parent: The hardware that this window is part of. + * @fbinfo: Pointer pack to the framebuffer info for this window. + * @palette_buffer: Buffer/cache to hold palette entries. + * @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/ + * @index: The window number of this window. + * @palette: The bitfields for changing r/g/b into a hardware palette entry. + */ +struct s3c_fb_win { + struct s3c_fb_pd_win *windata; + struct s3c_fb *parent; + struct fb_info *fbinfo; + struct s3c_fb_palette palette; + + u32 *palette_buffer; + u32 pseudo_palette[16]; + unsigned int index; +}; + +/** + * struct s3c_fb - overall hardware state of the hardware + * @dev: The device that we bound to, for printing, etc. + * @regs_res: The resource we claimed for the IO registers. + * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk. + * @regs: The mapped hardware registers. + * @enabled: A bitmask of enabled hardware windows. + * @pdata: The platform configuration data passed with the device. + * @windows: The hardware windows that have been claimed. + */ +struct s3c_fb { + struct device *dev; + struct resource *regs_res; + struct clk *bus_clk; + void __iomem *regs; + + unsigned char enabled; + + struct s3c_fb_platdata *pdata; + struct s3c_fb_win *windows[S3C_FB_MAX_WIN]; +}; + +/** + * s3c_fb_win_has_palette() - determine if a mode has a palette + * @win: The window number being queried. + * @bpp: The number of bits per pixel to test. + * + * Work out if the given window supports palletised data at the specified bpp. + */ +static int s3c_fb_win_has_palette(unsigned int win, unsigned int bpp) +{ + return s3c_fb_win_pal_size(win) <= (1 << bpp); +} + +/** + * s3c_fb_check_var() - framebuffer layer request to verify a given mode. + * @var: The screen information to verify. + * @info: The framebuffer device. + * + * Framebuffer layer call to verify the given information and allow us to + * update various information depending on the hardware capabilities. + */ +static int s3c_fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct s3c_fb_win *win = info->par; + struct s3c_fb_pd_win *windata = win->windata; + struct s3c_fb *sfb = win->parent; + + dev_dbg(sfb->dev, "checking parameters\n"); + + var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres); + var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres); + + if (!s3c_fb_validate_win_bpp(win->index, var->bits_per_pixel)) { + dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n", + win->index, var->bits_per_pixel); + return -EINVAL; + } + + /* always ensure these are zero, for drop through cases below */ + var->transp.offset = 0; + var->transp.length = 0; + + switch (var->bits_per_pixel) { + case 1: + case 2: + case 4: + case 8: + if (!s3c_fb_win_has_palette(win->index, var->bits_per_pixel)) { + /* non palletised, A:1,R:2,G:3,B:2 mode */ + var->red.offset = 4; + var->green.offset = 2; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 3; + var->blue.length = 2; + var->transp.offset = 7; + var->transp.length = 1; + } else { + var->red.offset = 0; + var->red.length = var->bits_per_pixel; + var->green = var->red; + var->blue = var->red; + } + break; + + case 19: + /* 666 with one bit alpha/transparency */ + var->transp.offset = 18; + var->transp.length = 1; + case 18: + var->bits_per_pixel = 32; + + /* 666 format */ + var->red.offset = 12; + var->green.offset = 6; + var->blue.offset = 0; + var->red.length = 6; + var->green.length = 6; + var->blue.length = 6; + break; + + case 16: + /* 16 bpp, 565 format */ + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + break; + + case 28: + case 25: + var->transp.length = var->bits_per_pixel - 24; + var->transp.offset = 24; + /* drop through */ + case 24: + /* our 24bpp is unpacked, so 32bpp */ + var->bits_per_pixel = 32; + case 32: + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + break; + + default: + dev_err(sfb->dev, "invalid bpp\n"); + } + + dev_dbg(sfb->dev, "%s: verified parameters\n", __func__); + return 0; +} + +/** + * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock. + * @sfb: The hardware state. + * @pixclock: The pixel clock wanted, in picoseconds. + * + * Given the specified pixel clock, work out the necessary divider to get + * close to the output frequency. + */ +static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk) +{ + unsigned long clk = clk_get_rate(sfb->bus_clk); + unsigned long long tmp; + unsigned int result; + + tmp = (unsigned long long)clk; + tmp *= pixclk; + + do_div(tmp, 1000000000UL); + result = (unsigned int)tmp / 1000; + + dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n", + pixclk, clk, result, clk / result); + + return result; +} + +/** + * s3c_fb_align_word() - align pixel count to word boundary + * @bpp: The number of bits per pixel + * @pix: The value to be aligned. + * + * Align the given pixel count so that it will start on an 32bit word + * boundary. + */ +static int s3c_fb_align_word(unsigned int bpp, unsigned int pix) +{ + int pix_per_word; + + if (bpp > 16) + return pix; + + pix_per_word = (8 * 32) / bpp; + return ALIGN(pix, pix_per_word); +} + +/** + * s3c_fb_set_par() - framebuffer request to set new framebuffer state. + * @info: The framebuffer to change. + * + * Framebuffer layer request to set a new mode for the specified framebuffer + */ +static int s3c_fb_set_par(struct fb_info *info) +{ + struct fb_var_screeninfo *var = &info->var; + struct s3c_fb_win *win = info->par; + struct s3c_fb *sfb = win->parent; + void __iomem *regs = sfb->regs; + int win_no = win->index; + u32 data; + u32 pagewidth; + int clkdiv; + + dev_dbg(sfb->dev, "setting framebuffer parameters\n"); + + switch (var->bits_per_pixel) { + case 32: + case 24: + case 16: + case 12: + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + case 8: + if (s3c_fb_win_has_palette(win_no, 8)) + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + else + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + case 1: + info->fix.visual = FB_VISUAL_MONO01; + break; + default: + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + } + + info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8; + + /* disable the window whilst we update it */ + writel(0, regs + WINCON(win_no)); + + /* use window 0 as the basis for the lcd output timings */ + + if (win_no == 0) { + clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock); + + data = sfb->pdata->vidcon0; + data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); + + if (clkdiv > 1) + data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR; + else + data &= ~VIDCON0_CLKDIR; /* 1:1 clock */ + + /* write the timing data to the panel */ + + data |= VIDCON0_ENVID | VIDCON0_ENVID_F; + writel(data, regs + VIDCON0); + + data = VIDTCON0_VBPD(var->upper_margin - 1) | + VIDTCON0_VFPD(var->lower_margin - 1) | + VIDTCON0_VSPW(var->vsync_len - 1); + + writel(data, regs + VIDTCON0); + + data = VIDTCON1_HBPD(var->left_margin - 1) | + VIDTCON1_HFPD(var->right_margin - 1) | + VIDTCON1_HSPW(var->hsync_len - 1); + + writel(data, regs + VIDTCON1); + + data = VIDTCON2_LINEVAL(var->yres - 1) | + VIDTCON2_HOZVAL(var->xres - 1); + writel(data, regs + VIDTCON2); + } + + /* write the buffer address */ + + writel(info->fix.smem_start, regs + VIDW_BUF_START(win_no)); + + data = info->fix.smem_start + info->fix.line_length * var->yres; + writel(data, regs + VIDW_BUF_END(win_no)); + + pagewidth = (var->xres * var->bits_per_pixel) >> 3; + data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) | + VIDW_BUF_SIZE_PAGEWIDTH(pagewidth); + writel(data, regs + VIDW_BUF_SIZE(win_no)); + + /* write 'OSD' registers to control position of framebuffer */ + + data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0); + writel(data, regs + VIDOSD_A(win_no)); + + data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel, + var->xres - 1)) | + VIDOSDxB_BOTRIGHT_Y(var->yres - 1); + + writel(data, regs + VIDOSD_B(win_no)); + + data = var->xres * var->yres; + if (s3c_fb_has_osd_d(win_no)) { + writel(data, regs + VIDOSD_D(win_no)); + writel(0, regs + VIDOSD_C(win_no)); + } else + writel(data, regs + VIDOSD_C(win_no)); + + data = WINCONx_ENWIN; + + /* note, since we have to round up the bits-per-pixel, we end up + * relying on the bitfield information for r/g/b/a to work out + * exactly which mode of operation is intended. */ + + switch (var->bits_per_pixel) { + case 1: + data |= WINCON0_BPPMODE_1BPP; + data |= WINCONx_BITSWP; + data |= WINCONx_BURSTLEN_4WORD; + break; + case 2: + data |= WINCON0_BPPMODE_2BPP; + data |= WINCONx_BITSWP; + data |= WINCONx_BURSTLEN_8WORD; + break; + case 4: + data |= WINCON0_BPPMODE_4BPP; + data |= WINCONx_BITSWP; + data |= WINCONx_BURSTLEN_8WORD; + break; + case 8: + if (var->transp.length != 0) + data |= WINCON1_BPPMODE_8BPP_1232; + else + data |= WINCON0_BPPMODE_8BPP_PALETTE; + data |= WINCONx_BURSTLEN_8WORD; + data |= WINCONx_BYTSWP; + break; + case 16: + if (var->transp.length != 0) + data |= WINCON1_BPPMODE_16BPP_A1555; + else + data |= WINCON0_BPPMODE_16BPP_565; + data |= WINCONx_HAWSWP; + data |= WINCONx_BURSTLEN_16WORD; + break; + case 24: + case 32: + if (var->red.length == 6) { + if (var->transp.length != 0) + data |= WINCON1_BPPMODE_19BPP_A1666; + else + data |= WINCON1_BPPMODE_18BPP_666; + } else if (var->transp.length != 0) + data |= WINCON1_BPPMODE_25BPP_A1888; + else + data |= WINCON0_BPPMODE_24BPP_888; + + data |= WINCONx_BURSTLEN_16WORD; + break; + } + + writel(data, regs + WINCON(win_no)); + writel(0x0, regs + WINxMAP(win_no)); + + return 0; +} + +/** + * s3c_fb_update_palette() - set or schedule a palette update. + * @sfb: The hardware information. + * @win: The window being updated. + * @reg: The palette index being changed. + * @value: The computed palette value. + * + * Change the value of a palette register, either by directly writing to + * the palette (this requires the palette RAM to be disconnected from the + * hardware whilst this is in progress) or schedule the update for later. + * + * At the moment, since we have no VSYNC interrupt support, we simply set + * the palette entry directly. + */ +static void s3c_fb_update_palette(struct s3c_fb *sfb, + struct s3c_fb_win *win, + unsigned int reg, + u32 value) +{ + void __iomem *palreg; + u32 palcon; + + palreg = sfb->regs + s3c_fb_pal_reg(win->index, reg); + + dev_dbg(sfb->dev, "%s: win %d, reg %d (%p): %08x\n", + __func__, win->index, reg, palreg, value); + + win->palette_buffer[reg] = value; + + palcon = readl(sfb->regs + WPALCON); + writel(palcon | WPALCON_PAL_UPDATE, sfb->regs + WPALCON); + + if (s3c_fb_pal_is16(win->index)) + writew(value, palreg); + else + writel(value, palreg); + + writel(palcon, sfb->regs + WPALCON); +} + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +/** + * s3c_fb_setcolreg() - framebuffer layer request to change palette. + * @regno: The palette index to change. + * @red: The red field for the palette data. + * @green: The green field for the palette data. + * @blue: The blue field for the palette data. + * @trans: The transparency (alpha) field for the palette data. + * @info: The framebuffer being changed. + */ +static int s3c_fb_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct s3c_fb_win *win = info->par; + struct s3c_fb *sfb = win->parent; + unsigned int val; + + dev_dbg(sfb->dev, "%s: win %d: %d => rgb=%d/%d/%d\n", + __func__, win->index, regno, red, green, blue); + + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* true-colour, use pseudo-palette */ + + if (regno < 16) { + u32 *pal = info->pseudo_palette; + + val = chan_to_field(red, &info->var.red); + val |= chan_to_field(green, &info->var.green); + val |= chan_to_field(blue, &info->var.blue); + + pal[regno] = val; + } + break; + + case FB_VISUAL_PSEUDOCOLOR: + if (regno < s3c_fb_win_pal_size(win->index)) { + val = chan_to_field(red, &win->palette.r); + val |= chan_to_field(green, &win->palette.g); + val |= chan_to_field(blue, &win->palette.b); + + s3c_fb_update_palette(sfb, win, regno, val); + } + + break; + + default: + return 1; /* unknown type */ + } + + return 0; +} + +/** + * s3c_fb_enable() - Set the state of the main LCD output + * @sfb: The main framebuffer state. + * @enable: The state to set. + */ +static void s3c_fb_enable(struct s3c_fb *sfb, int enable) +{ + u32 vidcon0 = readl(sfb->regs + VIDCON0); + + if (enable) + vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F; + else { + /* see the note in the framebuffer datasheet about + * why you cannot take both of these bits down at the + * same time. */ + + if (!(vidcon0 & VIDCON0_ENVID)) + return; + + vidcon0 |= VIDCON0_ENVID; + vidcon0 &= ~VIDCON0_ENVID_F; + } + + writel(vidcon0, sfb->regs + VIDCON0); +} + +/** + * s3c_fb_blank() - blank or unblank the given window + * @blank_mode: The blank state from FB_BLANK_* + * @info: The framebuffer to blank. + * + * Framebuffer layer request to change the power state. + */ +static int s3c_fb_blank(int blank_mode, struct fb_info *info) +{ + struct s3c_fb_win *win = info->par; + struct s3c_fb *sfb = win->parent; + unsigned int index = win->index; + u32 wincon; + + dev_dbg(sfb->dev, "blank mode %d\n", blank_mode); + + wincon = readl(sfb->regs + WINCON(index)); + + switch (blank_mode) { + case FB_BLANK_POWERDOWN: + wincon &= ~WINCONx_ENWIN; + sfb->enabled &= ~(1 << index); + /* fall through to FB_BLANK_NORMAL */ + + case FB_BLANK_NORMAL: + /* disable the DMA and display 0x0 (black) */ + writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0), + sfb->regs + WINxMAP(index)); + break; + + case FB_BLANK_UNBLANK: + writel(0x0, sfb->regs + WINxMAP(index)); + wincon |= WINCONx_ENWIN; + sfb->enabled |= (1 << index); + break; + + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + default: + return 1; + } + + writel(wincon, sfb->regs + WINCON(index)); + + /* Check the enabled state to see if we need to be running the + * main LCD interface, as if there are no active windows then + * it is highly likely that we also do not need to output + * anything. + */ + + /* We could do something like the following code, but the current + * system of using framebuffer events means that we cannot make + * the distinction between just window 0 being inactive and all + * the windows being down. + * + * s3c_fb_enable(sfb, sfb->enabled ? 1 : 0); + */ + + /* we're stuck with this until we can do something about overriding + * the power control using the blanking event for a single fb. + */ + if (index == 0) + s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0); + + return 0; +} + +static struct fb_ops s3c_fb_ops = { + .owner = THIS_MODULE, + .fb_check_var = s3c_fb_check_var, + .fb_set_par = s3c_fb_set_par, + .fb_blank = s3c_fb_blank, + .fb_setcolreg = s3c_fb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +/** + * s3c_fb_alloc_memory() - allocate display memory for framebuffer window + * @sfb: The base resources for the hardware. + * @win: The window to initialise memory for. + * + * Allocate memory for the given framebuffer. + */ +static int __devinit s3c_fb_alloc_memory(struct s3c_fb *sfb, + struct s3c_fb_win *win) +{ + struct s3c_fb_pd_win *windata = win->windata; + unsigned int real_size, virt_size, size; + struct fb_info *fbi = win->fbinfo; + dma_addr_t map_dma; + + dev_dbg(sfb->dev, "allocating memory for display\n"); + + real_size = windata->win_mode.xres * windata->win_mode.yres; + virt_size = windata->virtual_x * windata->virtual_y; + + dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n", + real_size, windata->win_mode.xres, windata->win_mode.yres, + virt_size, windata->virtual_x, windata->virtual_y); + + size = (real_size > virt_size) ? real_size : virt_size; + size *= (windata->max_bpp > 16) ? 32 : windata->max_bpp; + size /= 8; + + fbi->fix.smem_len = size; + size = PAGE_ALIGN(size); + + dev_dbg(sfb->dev, "want %u bytes for window\n", size); + + fbi->screen_base = dma_alloc_writecombine(sfb->dev, size, + &map_dma, GFP_KERNEL); + if (!fbi->screen_base) + return -ENOMEM; + + dev_dbg(sfb->dev, "mapped %x to %p\n", + (unsigned int)map_dma, fbi->screen_base); + + memset(fbi->screen_base, 0x0, size); + fbi->fix.smem_start = map_dma; + + return 0; +} + +/** + * s3c_fb_free_memory() - free the display memory for the given window + * @sfb: The base resources for the hardware. + * @win: The window to free the display memory for. + * + * Free the display memory allocated by s3c_fb_alloc_memory(). + */ +static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win) +{ + struct fb_info *fbi = win->fbinfo; + + dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len), + fbi->screen_base, fbi->fix.smem_start); +} + +/** + * s3c_fb_release_win() - release resources for a framebuffer window. + * @win: The window to cleanup the resources for. + * + * Release the resources that where claimed for the hardware window, + * such as the framebuffer instance and any memory claimed for it. + */ +static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win) +{ + fb_dealloc_cmap(&win->fbinfo->cmap); + unregister_framebuffer(win->fbinfo); + s3c_fb_free_memory(sfb, win); +} + +/** + * s3c_fb_probe_win() - register an hardware window + * @sfb: The base resources for the hardware + * @res: Pointer to where to place the resultant window. + * + * Allocate and do the basic initialisation for one of the hardware's graphics + * windows. + */ +static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, + struct s3c_fb_win **res) +{ + struct fb_var_screeninfo *var; + struct fb_videomode *initmode; + struct s3c_fb_pd_win *windata; + struct s3c_fb_win *win; + struct fb_info *fbinfo; + int palette_size; + int ret; + + dev_dbg(sfb->dev, "probing window %d\n", win_no); + + palette_size = s3c_fb_win_pal_size(win_no); + + fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) + + palette_size * sizeof(u32), sfb->dev); + if (!fbinfo) { + dev_err(sfb->dev, "failed to allocate framebuffer\n"); + return -ENOENT; + } + + windata = sfb->pdata->win[win_no]; + initmode = &windata->win_mode; + + WARN_ON(windata->max_bpp == 0); + WARN_ON(windata->win_mode.xres == 0); + WARN_ON(windata->win_mode.yres == 0); + + win = fbinfo->par; + var = &fbinfo->var; + win->fbinfo = fbinfo; + win->parent = sfb; + win->windata = windata; + win->index = win_no; + win->palette_buffer = (u32 *)(win + 1); + + ret = s3c_fb_alloc_memory(sfb, win); + if (ret) { + dev_err(sfb->dev, "failed to allocate display memory\n"); + goto err_framebuffer; + } + + /* setup the r/b/g positions for the window's palette */ + s3c_fb_init_palette(win_no, &win->palette); + + /* setup the initial video mode from the window */ + fb_videomode_to_var(&fbinfo->var, initmode); + + fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; + fbinfo->fix.accel = FB_ACCEL_NONE; + fbinfo->var.activate = FB_ACTIVATE_NOW; + fbinfo->var.vmode = FB_VMODE_NONINTERLACED; + fbinfo->var.bits_per_pixel = windata->default_bpp; + fbinfo->fbops = &s3c_fb_ops; + fbinfo->flags = FBINFO_FLAG_DEFAULT; + fbinfo->pseudo_palette = &win->pseudo_palette; + + /* prepare to actually start the framebuffer */ + + ret = s3c_fb_check_var(&fbinfo->var, fbinfo); + if (ret < 0) { + dev_err(sfb->dev, "check_var failed on initial video params\n"); + goto err_alloc_mem; + } + + /* create initial colour map */ + + ret = fb_alloc_cmap(&fbinfo->cmap, s3c_fb_win_pal_size(win_no), 1); + if (ret == 0) + fb_set_cmap(&fbinfo->cmap, fbinfo); + else + dev_err(sfb->dev, "failed to allocate fb cmap\n"); + + s3c_fb_set_par(fbinfo); + + dev_dbg(sfb->dev, "about to register framebuffer\n"); + + /* run the check_var and set_par on our configuration. */ + + ret = register_framebuffer(fbinfo); + if (ret < 0) { + dev_err(sfb->dev, "failed to register framebuffer\n"); + goto err_alloc_mem; + } + + *res = win; + dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id); + + return 0; + +err_alloc_mem: + s3c_fb_free_memory(sfb, win); + +err_framebuffer: + unregister_framebuffer(fbinfo); + return ret; +} + +/** + * s3c_fb_clear_win() - clear hardware window registers. + * @sfb: The base resources for the hardware. + * @win: The window to process. + * + * Reset the specific window registers to a known state. + */ +static void s3c_fb_clear_win(struct s3c_fb *sfb, int win) +{ + void __iomem *regs = sfb->regs; + + writel(0, regs + WINCON(win)); + writel(0xffffff, regs + WxKEYCONy(win, 0)); + writel(0xffffff, regs + WxKEYCONy(win, 1)); + + writel(0, regs + VIDOSD_A(win)); + writel(0, regs + VIDOSD_B(win)); + writel(0, regs + VIDOSD_C(win)); +} + +static int __devinit s3c_fb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct s3c_fb_platdata *pd; + struct s3c_fb *sfb; + struct resource *res; + int win; + int ret = 0; + + pd = pdev->dev.platform_data; + if (!pd) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + + sfb = kzalloc(sizeof(struct s3c_fb), GFP_KERNEL); + if (!sfb) { + dev_err(dev, "no memory for framebuffers\n"); + return -ENOMEM; + } + + sfb->dev = dev; + sfb->pdata = pd; + + sfb->bus_clk = clk_get(dev, "lcd"); + if (IS_ERR(sfb->bus_clk)) { + dev_err(dev, "failed to get bus clock\n"); + goto err_sfb; + } + + clk_enable(sfb->bus_clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "failed to find registers\n"); + ret = -ENOENT; + goto err_clk; + } + + sfb->regs_res = request_mem_region(res->start, resource_size(res), + dev_name(dev)); + if (!sfb->regs_res) { + dev_err(dev, "failed to claim register region\n"); + ret = -ENOENT; + goto err_clk; + } + + sfb->regs = ioremap(res->start, resource_size(res)); + if (!sfb->regs) { + dev_err(dev, "failed to map registers\n"); + ret = -ENXIO; + goto err_req_region; + } + + dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs); + + /* setup gpio and output polarity controls */ + + pd->setup_gpio(); + + writel(pd->vidcon1, sfb->regs + VIDCON1); + + /* zero all windows before we do anything */ + + for (win = 0; win < S3C_FB_MAX_WIN; win++) + s3c_fb_clear_win(sfb, win); + + /* we have the register setup, start allocating framebuffers */ + + for (win = 0; win < S3C_FB_MAX_WIN; win++) { + if (!pd->win[win]) + continue; + + ret = s3c_fb_probe_win(sfb, win, &sfb->windows[win]); + if (ret < 0) { + dev_err(dev, "failed to create window %d\n", win); + for (; win >= 0; win--) + s3c_fb_release_win(sfb, sfb->windows[win]); + goto err_ioremap; + } + } + + platform_set_drvdata(pdev, sfb); + + return 0; + +err_ioremap: + iounmap(sfb->regs); + +err_req_region: + release_resource(sfb->regs_res); + kfree(sfb->regs_res); + +err_clk: + clk_disable(sfb->bus_clk); + clk_put(sfb->bus_clk); + +err_sfb: + kfree(sfb); + return ret; +} + +/** + * s3c_fb_remove() - Cleanup on module finalisation + * @pdev: The platform device we are bound to. + * + * Shutdown and then release all the resources that the driver allocated + * on initialisation. + */ +static int __devexit s3c_fb_remove(struct platform_device *pdev) +{ + struct s3c_fb *sfb = platform_get_drvdata(pdev); + int win; + + for (win = 0; win <= S3C_FB_MAX_WIN; win++) + s3c_fb_release_win(sfb, sfb->windows[win]); + + iounmap(sfb->regs); + + clk_disable(sfb->bus_clk); + clk_put(sfb->bus_clk); + + release_resource(sfb->regs_res); + kfree(sfb->regs_res); + + kfree(sfb); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct s3c_fb *sfb = platform_get_drvdata(pdev); + struct s3c_fb_win *win; + int win_no; + + for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) { + win = sfb->windows[win_no]; + if (!win) + continue; + + /* use the blank function to push into power-down */ + s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo); + } + + clk_disable(sfb->bus_clk); + return 0; +} + +static int s3c_fb_resume(struct platform_device *pdev) +{ + struct s3c_fb *sfb = platform_get_drvdata(pdev); + struct s3c_fb_win *win; + int win_no; + + clk_enable(sfb->bus_clk); + + for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) { + win = sfb->windows[win_no]; + if (!win) + continue; + + dev_dbg(&pdev->dev, "resuming window %d\n", win_no); + s3c_fb_set_par(win->fbinfo); + } + + return 0; +} +#else +#define s3c_fb_suspend NULL +#define s3c_fb_resume NULL +#endif + +static struct platform_driver s3c_fb_driver = { + .probe = s3c_fb_probe, + .remove = s3c_fb_remove, + .suspend = s3c_fb_suspend, + .resume = s3c_fb_resume, + .driver = { + .name = "s3c-fb", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c_fb_init(void) +{ + return platform_driver_register(&s3c_fb_driver); +} + +static void __exit s3c_fb_cleanup(void) +{ + platform_driver_unregister(&s3c_fb_driver); +} + +module_init(s3c_fb_init); +module_exit(s3c_fb_cleanup); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("Samsung S3C SoC Framebuffer driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c-fb"); _ Patches currently in -mm which might be from ben-linux@fluff.org are origin.patch linux-next.patch i2c-incremental-i2c-mpc-driver-fix-for-multi-master-i2c-busses.patch