diff -U 3 -H -d -r -N -- linux-2.6.28.orig/drivers/media/video/ir-kbd-i2c.c linux-2.6.28/drivers/media/video/ir-kbd-i2c.c
--- linux-2.6.28.orig/drivers/media/video/ir-kbd-i2c.c	2008-12-25 00:26:37.000000000 +0100
+++ linux-2.6.28/drivers/media/video/ir-kbd-i2c.c	2009-03-23 20:16:59.000000000 +0100
@@ -340,6 +340,7 @@
 		ir_type     = IR_TYPE_RC5;
 		ir_codes    = ir_codes_fusionhdtv_mce;
 		break;
+	case 0x0b:
 	case 0x7a:
 	case 0x47:
 	case 0x71:
@@ -450,16 +451,18 @@
 	*/
 
 	static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1};
-	static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, 0x2d, -1 };
+	static const int probe_saa7134[] = {0x0b, 0x7a, 0x47, 0x71, 0x2d, -1 };
 	static const int probe_em28XX[] = { 0x30, 0x47, -1 };
 	static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 };
 	static const int probe_cx23885[] = { 0x6b, -1 };
-	const int *probe;
+	const int *probe = NULL;
+	struct i2c_client c;
 	struct i2c_msg msg = {
 		.flags = I2C_M_RD,
 		.len = 0,
 		.buf = NULL,
 	};
+	unsigned char buf;
 	int i, rc;
 
 	switch (adap->id) {
@@ -485,8 +488,21 @@
 		return 0;
 	}
 
+	memset(&c,0,sizeof(c));
+	c.adapter = adap;
+
 	for (i = 0; -1 != probe[i]; i++) {
-		msg.addr = probe[i];
+		c.addr = probe[i];
+		msg.addr = c.addr;
+
+		/* if the card is a FlyDVB Trio... */
+		if (c.adapter->id == I2C_HW_SAA7134 && probe[i] == 0x0b) {
+		/* ...enable the ir */
+			buf = 0 ;
+			if (1 != i2c_master_send(&c,&buf,1))
+				dprintk(1,"Unable to enable ir receiver.\n");
+		}
+		
 		rc = i2c_transfer(adap, &msg, 1);
 		dprintk(1,"probe 0x%02x @ %s: %s\n",
 			probe[i], adap->name,
diff -U 3 -H -d -r -N -- linux-2.6.28.orig/drivers/media/video/saa7134/saa7134-cards.c linux-2.6.28/drivers/media/video/saa7134/saa7134-cards.c
--- linux-2.6.28.orig/drivers/media/video/saa7134/saa7134-cards.c	2008-12-25 00:26:37.000000000 +0100
+++ linux-2.6.28/drivers/media/video/saa7134/saa7134-cards.c	2009-04-01 22:17:31.000000000 +0200
@@ -5971,6 +5971,7 @@
 	case SAA7134_BOARD_UPMOST_PURPLE_TV:
 	case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+	case SAA7134_BOARD_FLYDVB_TRIO:
 	case SAA7134_BOARD_BEHOLD_607_9FM:
 	case SAA7134_BOARD_BEHOLD_M6:
 	case SAA7134_BOARD_BEHOLD_M63:
diff -U 3 -H -d -r -N -- linux-2.6.28.orig/drivers/media/video/saa7134/saa7134-i2c.c linux-2.6.28/drivers/media/video/saa7134/saa7134-i2c.c
--- linux-2.6.28.orig/drivers/media/video/saa7134/saa7134-i2c.c	2008-12-25 00:26:37.000000000 +0100
+++ linux-2.6.28/drivers/media/video/saa7134/saa7134-i2c.c	2009-03-20 19:03:25.000000000 +0100
@@ -333,6 +333,7 @@
 	/* Am I an i2c remote control? */
 
 	switch (client->addr) {
+		case 0x0b:
 		case 0x7a:
 		case 0x47:
 		case 0x71:
diff -U 3 -H -d -r -N -- linux-2.6.28.orig/drivers/media/video/saa7134/saa7134-input.c linux-2.6.28/drivers/media/video/saa7134/saa7134-input.c
--- linux-2.6.28.orig/drivers/media/video/saa7134/saa7134-input.c	2008-12-25 00:26:37.000000000 +0100
+++ linux-2.6.28/drivers/media/video/saa7134/saa7134-input.c	2009-04-01 21:25:31.000000000 +0200
@@ -118,6 +118,50 @@
 
 /* --------------------- Chip specific I2C key builders ----------------- */
 
+static int get_key_lifeview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	unsigned long b;
+	int gpio;
+
+	/* We need this to access GPIO. Used by the saa_readl macro. */
+	struct saa7134_dev *dev = ir->c.adapter->algo_data;
+
+	if (dev == NULL) {
+		dprintk("get_key_lifeview: "
+			"ir->c.adapter->algo_data is NULL!\n");
+		return -EIO;
+	}
+
+	/* rising SAA7134_GPIO_GPRESCAN reads the status */
+	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+	gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
+
+	if (0x40000 &~ gpio)
+		return 0;	/* No button press */
+
+	/* No button press - only before first key pressed */
+	if (b == 0xFF)
+		return 0;
+
+	/* poll IR chip */
+	b = 0;
+	if (1 != i2c_master_send(&ir->c, (char *)&b, 1)) {
+		i2cdprintk("send wake up byte to pic16C505 failed\n");
+		return -EIO;
+	}
+	if (1 != i2c_master_recv(&ir->c, (char *)&b, 1)) {
+		i2cdprintk("read error\n");
+		return -EIO;
+	}
+
+	/* Button pressed */
+	*ir_key = b;
+	*ir_raw = b;
+	return 1;
+}
+
 static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 				       u32 *ir_raw)
 {
@@ -688,6 +732,11 @@
 		ir->get_key   = get_key_purpletv;
 		ir->ir_codes  = ir_codes_purpletv;
 		break;
+	case SAA7134_BOARD_FLYDVB_TRIO:
+		snprintf(ir->c.name, sizeof(ir->c.name), "Lifeview");
+		ir->get_key   = get_key_lifeview;
+		ir->ir_codes  = ir_codes_flydvb;
+		break;
 	case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
 		snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus");
 		ir->get_key  = get_key_msi_tvanywhere_plus;