From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp1.linux-foundation.org ([140.211.169.13]:55263 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751594AbZEMGOI (ORCPT ); Wed, 13 May 2009 02:14:08 -0400 Date: Tue, 12 May 2009 23:11:50 -0700 From: Andrew Morton To: Luis Galdos Cc: , linux-wireless@vger.kernel.org Subject: Re: [LIBERTAS-SDIO] Support for single transfer blocks? Message-Id: <20090512231150.bc0c65c6.akpm@linux-foundation.org> In-Reply-To: <4A08392F.70108@digi.com> References: <4A08392F.70108@digi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-wireless-owner@vger.kernel.org List-ID: Let's Cc the wireless development list. On Mon, 11 May 2009 16:41:51 +0200 Luis Galdos wrote: > Hi all, > > I have one question concerning to the Libertas-driver: Does this driver works with > SDIO-hosts that only support single transfer blocks? I ask cause I have seen two problems > with a SDIO-port that doesn't support multiple blocks: > > * The firmware installation successes only with a modification of the block size (see > below patch) > > * The transfer of Ethernet-frames works only if the "complete" frame is smaller than the > block size of the SDIO-host. By larger packages, the SD8686 doesn't generate the expected > IRQ (cause it expected a multiple transfer) and the driver detects a timeout. > > Do you know something about this? Thanks in advance, > > > PS: Sorry for the possible wrong format of this email (my first one) > > > diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c > index b54e2ea..f88a4da 100644 > --- a/drivers/net/wireless/libertas/if_sdio.c > +++ b/drivers/net/wireless/libertas/if_sdio.c > @@ -33,6 +33,7 @@ > #include > #include > #include > +#include > > #include "host.h" > #include "decl.h" > @@ -507,6 +508,8 @@ static int if_sdio_prog_real(struct if_sdio_card *card) > u32 chunk_size; > const u8 *firmware; > size_t size, req_size; > + struct mmc_host *host; > + int max_blksize = 0; > > lbs_deb_enter(LBS_DEB_SDIO); > > @@ -524,7 +527,19 @@ static int if_sdio_prog_real(struct if_sdio_card *card) > > sdio_claim_host(card->func); > > - ret = sdio_set_block_size(card->func, 32); > + /* > + * If the host doesn't support multi-blocks, then use the the maximal block > + * size for the transfers. Otherwise the firmware installation will fail. > + */ > + host = card->func->card->host; > + if (host->max_blk_count == 1) { > + lbs_pr_info("Setting block size to %u\n", host->max_blk_size); > + max_blksize = card->func->max_blksize; > + card->func->max_blksize = host->max_blk_size; > + ret = sdio_set_block_size(card->func, host->max_blk_size); > + } else > + ret = sdio_set_block_size(card->func, 32); > + > if (ret) > goto release; > > @@ -593,6 +608,10 @@ static int if_sdio_prog_real(struct if_sdio_card *card) > > ret = 0; > > + /* Restore the original block size if it was changed before */ > + if (max_blksize) > + card->func->max_blksize = max_blksize; > + > lbs_deb_sdio("waiting for firmware to boot...\n"); > > /* wait for the firmware to boot */ > > > -- > Luis Galdos > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/