From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758726AbZFXON1 (ORCPT ); Wed, 24 Jun 2009 10:13:27 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752527AbZFXONT (ORCPT ); Wed, 24 Jun 2009 10:13:19 -0400 Received: from ru.mvista.com ([213.79.90.228]:5361 "EHLO buildserver.ru.mvista.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752077AbZFXONS (ORCPT ); Wed, 24 Jun 2009 10:13:18 -0400 Date: Wed, 24 Jun 2009 18:12:15 +0400 From: Anton Vorontsov To: Ryan Mallon Cc: Jean Delvare , linux kernel , linux-i2c@vger.kernel.org, David Woodhouse , jtester@gmail.com Subject: Re: [PATCH] ds2782 battery gas gauge driver Message-ID: <20090624141214.GA8269@oksana.dev.rtsoft.ru> Reply-To: avorontsov@ru.mvista.com References: <4A371CDF.3070407@bluewatersys.com> <20090617110908.17b47a18@hyperion.delvare> <4A397BA2.9030702@bluewatersys.com> <4A416B58.8020902@bluewatersys.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Disposition: inline In-Reply-To: <4A416B58.8020902@bluewatersys.com> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Jun 24, 2009 at 11:55:04AM +1200, Ryan Mallon wrote: > Ryan Mallon wrote: > > > > Updated patch below. > > > > > Any further comments on this? I got an IP blocked bounce on Anton's > cbou@mail.ru, so have CC'ed his other address here. The driver looks OK (modulo some cosmetic issues, but don't worry, I'll fix them myself). I'm about to send a pull request for battery tree, so I'll apply the patch after that (targeting 2.6.31, of course). Thanks for the driver! > > --- > > Add support for the DS2782 stand-alone I2C gas-gauge > > > > Signed-off-by: Ryan Mallon > > --- > > > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > > index 33da112..b9c818f 100644 > > --- a/drivers/power/Kconfig > > +++ b/drivers/power/Kconfig > > @@ -43,6 +43,13 @@ config BATTERY_DS2760 > > help > > Say Y here to enable support for batteries with ds2760 chip. > > > > +config BATTERY_DS2782 > > + tristate "DS2782 standalone gas-gauge" > > + depends on I2C > > + help > > + Say Y here to enable support for the DS2782 standalone battery > > + gas-gauge. > > + > > config BATTERY_PMU > > tristate "Apple PMU battery" > > depends on PPC32 && ADB_PMU > > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > > index 2fcf41d..ad1ac61 100644 > > --- a/drivers/power/Makefile > > +++ b/drivers/power/Makefile > > @@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o > > obj-$(CONFIG_WM8350_POWER) += wm8350_power.o > > > > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > > +obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o > > obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o > > obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o > > obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o > > diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c > > new file mode 100644 > > index 0000000..cfd4d28 > > --- /dev/null > > +++ b/drivers/power/ds2782_battery.c > > @@ -0,0 +1,321 @@ > > +/* > > + * drivers/power/ds2782_battery.c > > + * > > + * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC > > + * > > + * Copyright (C) 2009 Bluewater Systems Ltd > > + * Author: Ryan Mallon > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + * > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ > > + > > +#define DS2782_REG_VOLT_MSB 0x0c > > +#define DS2782_REG_TEMP_MSB 0x0a > > +#define DS2782_REG_CURRENT_MSB 0x0e > > + > > +/* EEPROM Block */ > > +#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ > > + > > +/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ > > +#define DS2782_CURRENT_UNITS 1563 > > + > > +#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery) > > + > > +struct ds2782_info { > > + struct i2c_client *client; > > + struct power_supply battery; > > + int id; > > +}; > > + > > +static DEFINE_IDR(battery_id); > > +static DEFINE_MUTEX(battery_lock); > > + > > +static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) > > +{ > > + int ret = i2c_smbus_read_byte_data(info->client, reg); > > + if (ret < 0) { > > + dev_err(&info->client->dev, "register read failed\n"); > > + return ret; > > + } > > + > > + *val = ret; > > + return 0; > > +} > > + > > +static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, > > + s16 *val) > > +{ > > + int ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb)); > > + if (ret < 0) { > > + dev_err(&info->client->dev, "register read failed\n"); > > + return ret; > > + } > > + > > + *val = ret; > > + return 0; > > +} > > + > > +static int ds2782_get_temp(struct ds2782_info *info, int *temp) > > +{ > > + s16 raw; > > + int err; > > + > > + /* > > + * Temperature is measured in units of 0.125 degrees celcius, the > > + * power_supply class measures temperature in tenths of degrees > > + * celsius. The temperature value is stored as a 10 bit number, plus > > + * sign in the upper bits of a 16 bit register. > > + */ > > + err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw); > > + if (err) > > + return err; > > + *temp = ((raw / 32) * 125) / 100; > > + return 0; > > +} > > + > > +static int ds2782_get_current(struct ds2782_info *info, int *current_uA) > > +{ > > + int sense_res, err; > > + u8 sense_res_raw; > > + s16 raw; > > + > > + /* > > + * The units of measurement for current are dependent on the value of > > + * the sense resistor. > > + */ > > + err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); > > + if (err) > > + return err; > > + if (sense_res_raw == 0) { > > + dev_err(&info->client->dev, "sense resistor value is 0\n"); > > + return -ENXIO; > > + } > > + sense_res = 1000 / sense_res_raw; > > + > > + dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", > > + sense_res); > > + err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw); > > + if (err) > > + return err; > > + *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); > > + return 0; > > +} > > + > > +static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) > > +{ > > + s16 raw; > > + int err; > > + > > + /* > > + * Voltage is measured in units of 4.88mV. The voltage is stored as > > + * a 10-bit number plus sign, in the upper bits of a 16-bit register > > + */ > > + err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw); > > + if (err) > > + return err; > > + *voltage_uA = (raw / 32) * 4800; > > + return 0; > > +} > > + > > +static int ds2782_get_capacity(struct ds2782_info *info, int *capacity) > > +{ > > + int err; > > + u8 raw; > > + > > + err = ds2782_read_reg(info, DS2782_REG_RARC, &raw); > > + if (err) > > + return err; > > + *capacity = raw; > > + return raw; > > +} > > + > > +static int ds2782_get_status(struct ds2782_info *info, int *status) > > +{ > > + int err, current_uA, capacity; > > + > > + err = ds2782_get_current(info, ¤t_uA); > > + if (err) > > + return err; > > + > > + err = ds2782_get_capacity(info, &capacity); > > + if (err) > > + return err; > > + > > + if (capacity == 100) > > + *status = POWER_SUPPLY_STATUS_FULL; > > + else if (current_uA == 0) > > + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + else if (current_uA < 0) > > + *status = POWER_SUPPLY_STATUS_DISCHARGING; > > + else > > + *status = POWER_SUPPLY_STATUS_CHARGING; > > + > > + return 0; > > +} > > + > > +static int ds2782_battery_get_property(struct power_supply *psy, > > + enum power_supply_property prop, > > + union power_supply_propval *val) > > +{ > > + struct ds2782_info *info = to_ds2782_info(psy); > > + int ret; > > + > > + switch (prop) { > > + case POWER_SUPPLY_PROP_STATUS: > > + ret = ds2782_get_status(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_CAPACITY: > > + ret = ds2782_get_capacity(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > > + ret = ds2782_get_voltage(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_CURRENT_NOW: > > + ret = ds2782_get_current(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_TEMP: > > + ret = ds2782_get_temp(info, &val->intval); > > + break; > > + > > + default: > > + ret = -EINVAL; > > + } > > + > > + return ret; > > +} > > + > > +static enum power_supply_property ds2782_battery_props[] = { > > + POWER_SUPPLY_PROP_STATUS, > > + POWER_SUPPLY_PROP_CAPACITY, > > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > > + POWER_SUPPLY_PROP_CURRENT_NOW, > > + POWER_SUPPLY_PROP_TEMP, > > +}; > > + > > +static void ds2782_power_supply_init(struct power_supply *battery) > > +{ > > + battery->type = POWER_SUPPLY_TYPE_BATTERY; > > + battery->properties = ds2782_battery_props; > > + battery->num_properties = ARRAY_SIZE(ds2782_battery_props); > > + battery->get_property = ds2782_battery_get_property; > > + battery->external_power_changed = NULL; > > +} > > + > > +static int ds2782_battery_remove(struct i2c_client *client) > > +{ > > + struct ds2782_info *info = i2c_get_clientdata(client); > > + > > + power_supply_unregister(&info->battery); > > + kfree(info->battery.name); > > + > > + mutex_lock(&battery_lock); > > + idr_remove(&battery_id, info->id); > > + mutex_unlock(&battery_lock); > > + > > + i2c_set_clientdata(client, info); > > + > > + kfree(info); > > + return 0; > > +} > > + > > +static int ds2782_battery_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct ds2782_info *info; > > + int ret, num; > > + > > + /* Get an ID for this battery */ > > + ret = idr_pre_get(&battery_id, GFP_KERNEL); > > + if (ret == 0) { > > + ret = -ENOMEM; > > + goto fail_id; > > + } > > + > > + mutex_lock(&battery_lock); > > + ret = idr_get_new(&battery_id, client, &num); > > + mutex_unlock(&battery_lock); > > + if (ret < 0) > > + goto fail_id; > > + > > + info = kzalloc(sizeof(struct ds2782_info), GFP_KERNEL); > > + if (!info) { > > + ret = -ENOMEM; > > + goto fail_info; > > + } > > + > > + info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num); > > + if (!info->battery.name) { > > + ret = -ENOMEM; > > + goto fail_name; > > + } > > + > > + i2c_set_clientdata(client, info); > > + info->client = client; > > + ds2782_power_supply_init(&info->battery); > > + > > + ret = power_supply_register(&client->dev, &info->battery); > > + if (ret) { > > + dev_err(&client->dev, "failed to register battery\n"); > > + goto fail_register; > > + } > > + > > + return 0; > > + > > +fail_register: > > + kfree(info->battery.name); > > +fail_name: > > + i2c_set_clientdata(client, info); > > + kfree(info); > > +fail_info: > > + mutex_lock(&battery_lock); > > + idr_remove(&battery_id, num); > > + mutex_unlock(&battery_lock); > > +fail_id: > > + return ret; > > +} > > + > > +static const struct i2c_device_id ds2782_id[] = { > > + {"ds2782", 0}, > > + {}, > > +}; > > + > > +static struct i2c_driver ds2782_battery_driver = { > > + .driver = { > > + .name = "ds2782-battery", > > + }, > > + .probe = ds2782_battery_probe, > > + .remove = ds2782_battery_remove, > > + .id_table = ds2782_id, > > +}; > > + > > +static int __init ds2782_init(void) > > +{ > > + return i2c_add_driver(&ds2782_battery_driver); > > +} > > + > > +static void __exit ds2782_exit(void) > > +{ > > + i2c_del_driver(&ds2782_battery_driver); > > +} > > + > > +module_init(ds2782_init); > > +module_exit(ds2782_exit); > > + > > +MODULE_AUTHOR("Ryan Mallon "); > > +MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); > > +MODULE_LICENSE("GPL"); > > > > > > -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anton Vorontsov Subject: Re: [PATCH] ds2782 battery gas gauge driver Date: Wed, 24 Jun 2009 18:12:15 +0400 Message-ID: <20090624141214.GA8269@oksana.dev.rtsoft.ru> References: <4A371CDF.3070407@bluewatersys.com> <20090617110908.17b47a18@hyperion.delvare> <4A397BA2.9030702@bluewatersys.com> <4A416B58.8020902@bluewatersys.com> Reply-To: avorontsov-hkdhdckH98+B+jHODAdFcQ@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=utf8 Return-path: Content-Disposition: inline In-Reply-To: <4A416B58.8020902-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Ryan Mallon Cc: Jean Delvare , linux kernel , linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, David Woodhouse , jtester-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org List-Id: linux-i2c@vger.kernel.org On Wed, Jun 24, 2009 at 11:55:04AM +1200, Ryan Mallon wrote: > Ryan Mallon wrote: > > > > Updated patch below. > > > > > Any further comments on this? I got an IP blocked bounce on Anton's > cbou-JGs/UdohzUI@public.gmane.org, so have CC'ed his other address here. The driver looks OK (modulo some cosmetic issues, but don't worry, I'll fix them myself). I'm about to send a pull request for battery tree, so I'll apply the patch after that (targeting 2.6.31, of course). Thanks for the driver! > > --- > > Add support for the DS2782 stand-alone I2C gas-gauge > > > > Signed-off-by: Ryan Mallon > > --- > > > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > > index 33da112..b9c818f 100644 > > --- a/drivers/power/Kconfig > > +++ b/drivers/power/Kconfig > > @@ -43,6 +43,13 @@ config BATTERY_DS2760 > > help > > Say Y here to enable support for batteries with ds2760 chip. > > > > +config BATTERY_DS2782 > > + tristate "DS2782 standalone gas-gauge" > > + depends on I2C > > + help > > + Say Y here to enable support for the DS2782 standalone battery > > + gas-gauge. > > + > > config BATTERY_PMU > > tristate "Apple PMU battery" > > depends on PPC32 && ADB_PMU > > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > > index 2fcf41d..ad1ac61 100644 > > --- a/drivers/power/Makefile > > +++ b/drivers/power/Makefile > > @@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o > > obj-$(CONFIG_WM8350_POWER) += wm8350_power.o > > > > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > > +obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o > > obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o > > obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o > > obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o > > diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c > > new file mode 100644 > > index 0000000..cfd4d28 > > --- /dev/null > > +++ b/drivers/power/ds2782_battery.c > > @@ -0,0 +1,321 @@ > > +/* > > + * drivers/power/ds2782_battery.c > > + * > > + * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC > > + * > > + * Copyright (C) 2009 Bluewater Systems Ltd > > + * Author: Ryan Mallon > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + * > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ > > + > > +#define DS2782_REG_VOLT_MSB 0x0c > > +#define DS2782_REG_TEMP_MSB 0x0a > > +#define DS2782_REG_CURRENT_MSB 0x0e > > + > > +/* EEPROM Block */ > > +#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ > > + > > +/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ > > +#define DS2782_CURRENT_UNITS 1563 > > + > > +#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery) > > + > > +struct ds2782_info { > > + struct i2c_client *client; > > + struct power_supply battery; > > + int id; > > +}; > > + > > +static DEFINE_IDR(battery_id); > > +static DEFINE_MUTEX(battery_lock); > > + > > +static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) > > +{ > > + int ret = i2c_smbus_read_byte_data(info->client, reg); > > + if (ret < 0) { > > + dev_err(&info->client->dev, "register read failed\n"); > > + return ret; > > + } > > + > > + *val = ret; > > + return 0; > > +} > > + > > +static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, > > + s16 *val) > > +{ > > + int ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb)); > > + if (ret < 0) { > > + dev_err(&info->client->dev, "register read failed\n"); > > + return ret; > > + } > > + > > + *val = ret; > > + return 0; > > +} > > + > > +static int ds2782_get_temp(struct ds2782_info *info, int *temp) > > +{ > > + s16 raw; > > + int err; > > + > > + /* > > + * Temperature is measured in units of 0.125 degrees celcius, the > > + * power_supply class measures temperature in tenths of degrees > > + * celsius. The temperature value is stored as a 10 bit number, plus > > + * sign in the upper bits of a 16 bit register. > > + */ > > + err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw); > > + if (err) > > + return err; > > + *temp = ((raw / 32) * 125) / 100; > > + return 0; > > +} > > + > > +static int ds2782_get_current(struct ds2782_info *info, int *current_uA) > > +{ > > + int sense_res, err; > > + u8 sense_res_raw; > > + s16 raw; > > + > > + /* > > + * The units of measurement for current are dependent on the value of > > + * the sense resistor. > > + */ > > + err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); > > + if (err) > > + return err; > > + if (sense_res_raw == 0) { > > + dev_err(&info->client->dev, "sense resistor value is 0\n"); > > + return -ENXIO; > > + } > > + sense_res = 1000 / sense_res_raw; > > + > > + dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", > > + sense_res); > > + err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw); > > + if (err) > > + return err; > > + *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); > > + return 0; > > +} > > + > > +static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) > > +{ > > + s16 raw; > > + int err; > > + > > + /* > > + * Voltage is measured in units of 4.88mV. The voltage is stored as > > + * a 10-bit number plus sign, in the upper bits of a 16-bit register > > + */ > > + err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw); > > + if (err) > > + return err; > > + *voltage_uA = (raw / 32) * 4800; > > + return 0; > > +} > > + > > +static int ds2782_get_capacity(struct ds2782_info *info, int *capacity) > > +{ > > + int err; > > + u8 raw; > > + > > + err = ds2782_read_reg(info, DS2782_REG_RARC, &raw); > > + if (err) > > + return err; > > + *capacity = raw; > > + return raw; > > +} > > + > > +static int ds2782_get_status(struct ds2782_info *info, int *status) > > +{ > > + int err, current_uA, capacity; > > + > > + err = ds2782_get_current(info, ¤t_uA); > > + if (err) > > + return err; > > + > > + err = ds2782_get_capacity(info, &capacity); > > + if (err) > > + return err; > > + > > + if (capacity == 100) > > + *status = POWER_SUPPLY_STATUS_FULL; > > + else if (current_uA == 0) > > + *status = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + else if (current_uA < 0) > > + *status = POWER_SUPPLY_STATUS_DISCHARGING; > > + else > > + *status = POWER_SUPPLY_STATUS_CHARGING; > > + > > + return 0; > > +} > > + > > +static int ds2782_battery_get_property(struct power_supply *psy, > > + enum power_supply_property prop, > > + union power_supply_propval *val) > > +{ > > + struct ds2782_info *info = to_ds2782_info(psy); > > + int ret; > > + > > + switch (prop) { > > + case POWER_SUPPLY_PROP_STATUS: > > + ret = ds2782_get_status(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_CAPACITY: > > + ret = ds2782_get_capacity(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > > + ret = ds2782_get_voltage(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_CURRENT_NOW: > > + ret = ds2782_get_current(info, &val->intval); > > + break; > > + > > + case POWER_SUPPLY_PROP_TEMP: > > + ret = ds2782_get_temp(info, &val->intval); > > + break; > > + > > + default: > > + ret = -EINVAL; > > + } > > + > > + return ret; > > +} > > + > > +static enum power_supply_property ds2782_battery_props[] = { > > + POWER_SUPPLY_PROP_STATUS, > > + POWER_SUPPLY_PROP_CAPACITY, > > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > > + POWER_SUPPLY_PROP_CURRENT_NOW, > > + POWER_SUPPLY_PROP_TEMP, > > +}; > > + > > +static void ds2782_power_supply_init(struct power_supply *battery) > > +{ > > + battery->type = POWER_SUPPLY_TYPE_BATTERY; > > + battery->properties = ds2782_battery_props; > > + battery->num_properties = ARRAY_SIZE(ds2782_battery_props); > > + battery->get_property = ds2782_battery_get_property; > > + battery->external_power_changed = NULL; > > +} > > + > > +static int ds2782_battery_remove(struct i2c_client *client) > > +{ > > + struct ds2782_info *info = i2c_get_clientdata(client); > > + > > + power_supply_unregister(&info->battery); > > + kfree(info->battery.name); > > + > > + mutex_lock(&battery_lock); > > + idr_remove(&battery_id, info->id); > > + mutex_unlock(&battery_lock); > > + > > + i2c_set_clientdata(client, info); > > + > > + kfree(info); > > + return 0; > > +} > > + > > +static int ds2782_battery_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct ds2782_info *info; > > + int ret, num; > > + > > + /* Get an ID for this battery */ > > + ret = idr_pre_get(&battery_id, GFP_KERNEL); > > + if (ret == 0) { > > + ret = -ENOMEM; > > + goto fail_id; > > + } > > + > > + mutex_lock(&battery_lock); > > + ret = idr_get_new(&battery_id, client, &num); > > + mutex_unlock(&battery_lock); > > + if (ret < 0) > > + goto fail_id; > > + > > + info = kzalloc(sizeof(struct ds2782_info), GFP_KERNEL); > > + if (!info) { > > + ret = -ENOMEM; > > + goto fail_info; > > + } > > + > > + info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num); > > + if (!info->battery.name) { > > + ret = -ENOMEM; > > + goto fail_name; > > + } > > + > > + i2c_set_clientdata(client, info); > > + info->client = client; > > + ds2782_power_supply_init(&info->battery); > > + > > + ret = power_supply_register(&client->dev, &info->battery); > > + if (ret) { > > + dev_err(&client->dev, "failed to register battery\n"); > > + goto fail_register; > > + } > > + > > + return 0; > > + > > +fail_register: > > + kfree(info->battery.name); > > +fail_name: > > + i2c_set_clientdata(client, info); > > + kfree(info); > > +fail_info: > > + mutex_lock(&battery_lock); > > + idr_remove(&battery_id, num); > > + mutex_unlock(&battery_lock); > > +fail_id: > > + return ret; > > +} > > + > > +static const struct i2c_device_id ds2782_id[] = { > > + {"ds2782", 0}, > > + {}, > > +}; > > + > > +static struct i2c_driver ds2782_battery_driver = { > > + .driver = { > > + .name = "ds2782-battery", > > + }, > > + .probe = ds2782_battery_probe, > > + .remove = ds2782_battery_remove, > > + .id_table = ds2782_id, > > +}; > > + > > +static int __init ds2782_init(void) > > +{ > > + return i2c_add_driver(&ds2782_battery_driver); > > +} > > + > > +static void __exit ds2782_exit(void) > > +{ > > + i2c_del_driver(&ds2782_battery_driver); > > +} > > + > > +module_init(ds2782_init); > > +module_exit(ds2782_exit); > > + > > +MODULE_AUTHOR("Ryan Mallon "); > > +MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); > > +MODULE_LICENSE("GPL"); > > > > > > -- Anton Vorontsov email: cbouatmailru-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org irc://irc.freenode.net/bd2