From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon, 29 Jun 2009 23:07:08 +0200
Subject: [U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale
 i.MX31 PDK board.
In-Reply-To: <e3fe3ff8b26871a6e3accde8e3620a8530018120.1244918138.git.lilja.magnus@gmail.com>
References: <cover.1244918138.git.lilja.magnus@gmail.com>
	<e3fe3ff8b26871a6e3accde8e3620a8530018120.1244918138.git.lilja.magnus@gmail.com>
Message-ID: <20090629210708.GC23292@game.jcrosoft.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 20:50 Sat 13 Jun     , Magnus Lilja wrote:
> Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).
> 
> This patch assumes that some other program performs the actual
> NAND boot.
> 
> Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
> ---
>  MAINTAINERS                           |    4 +
>  MAKEALL                               |    1 +
>  Makefile                              |    3 +
>  board/freescale/mx31pdk/Makefile      |   52 +++++++++++
>  board/freescale/mx31pdk/config.mk     |    1 +
>  board/freescale/mx31pdk/mx31pdk.c     |   63 +++++++++++++
>  include/asm-arm/arch-mx31/mx31-regs.h |    2 +
>  include/configs/mx31pdk.h             |  162 +++++++++++++++++++++++++++++++++
>  8 files changed, 288 insertions(+), 0 deletions(-)
>  create mode 100644 board/freescale/mx31pdk/Makefile
>  create mode 100644 board/freescale/mx31pdk/config.mk
>  create mode 100644 board/freescale/mx31pdk/mx31pdk.c
>  create mode 100644 include/configs/mx31pdk.h
Applied to u-boot/arm

Best Regards,
J.